Ubuntu18 dockerfiles: create intermediary build image

This commit creates an intermediary build image for all eNB, gNB, UE, nrUE, RU targets (ran-build) after the image containing all RAN compilation dependencies (ran-base). Then, the corresponding target container images are just copied from the ran-build.

Ubuntu18 dockerfiles: create intermediary build image
This commit creates an intermediary build image for all eNB, gNB, UE, nrUE, RU targets (ran-build) after the image containing all RAN compilation dependencies (ran-base). Then, the corresponding target container images are just copied from the ran-build.
60cba994 · Robert Schmidt · 3355febd · 60cba994 · 60cba994 · 60cba994
Commit 60cba994 authored Dec 08, 2021 by Robert Schmidt
7 changed files
--- a/docker/Dockerfile.ran.ubuntu18
+++ b/docker/Dockerfile.ran.ubuntu18
@@ -26,7 +26,7 @@
 #---------------------------------------------------------------------


-FROM ubuntu:bionic AS ran-build
+FROM ubuntu:bionic AS ran-base
 ARG NEEDED_GIT_PROXY
 ENV DEBIAN_FRONTEND=noninteractive
 ENV TZ=Europe/Paris

--- a/docker/Dockerfile.build.ubuntu18
+++ b/docker/Dockerfile.build.ubuntu18
+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+#---------------------------------------------------------------------
+#
+# Dockerfile for the Open-Air-Interface BUILD service
+#   Valid for Ubuntu 18.04
+#
+#---------------------------------------------------------------------
+
+FROM ran-base:latest as ran-build
+
+RUN rm -Rf /oai-ran
+WORKDIR /oai-ran
+COPY . .
+
+# build all targets so final targets can be created afterwards
+RUN /bin/sh oaienv && \
+    cd cmake_targets && \
+    mkdir -p log && \
+    ./build_oai --eNB --gNB --RU --UE --nrUE --ninja -w USRP --verbose-ci
--- a/docker/Dockerfile.eNB.ubuntu18
+++ b/docker/Dockerfile.eNB.ubuntu18
@@ -25,17 +25,9 @@
 #
 #---------------------------------------------------------------------

-FROM ran-build:latest AS enb-build
-
-RUN rm -Rf /oai-ran
-WORKDIR /oai-ran
-COPY . .
+FROM ran-base:latest as enb-base

-#run build_oai to build the target image
-RUN /bin/sh oaienv && \ 
-    cd cmake_targets && \
-    mkdir -p log && \
-    ./build_oai --eNB --ninja -w USRP --verbose-ci
+FROM ran-build:latest AS enb-build

 RUN python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml && \
    cp /oai-ran/docker/scripts/enb_entrypoint.sh /oai-ran/docker/scripts/entrypoint.sh
@@ -85,15 +77,17 @@ COPY --from=enb-build \
     /oai-ran/targets/bin/libparams_libconfig.so \
     /oai-ran/cmake_targets/ran_build/build/libdfts.so \
     /oai-ran/cmake_targets/ran_build/build/liboai_iqplayer.so \
-     /usr/local/lib/libprotobuf-c.so.1 \
     ./

 # Now we are copying from builder-image the UHD files.
-COPY --from=enb-build /usr/local/bin/uhd_find_devices /usr/local/bin
-COPY --from=enb-build /usr/local/lib/libuhd.so.3.15.0 /usr/local/lib
-COPY --from=enb-build /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-enb/bin
+COPY --from=enb-base /usr/local/bin/uhd_find_devices /usr/local/bin
+COPY --from=enb-base \
+     /usr/local/lib/libuhd.so.3.15.0 \
+     /usr/local/lib/libprotobuf-c.so.1 \
+     /usr/local/lib/
+COPY --from=enb-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-enb/bin
 WORKDIR /usr/lib/x86_64-linux-gnu
-COPY --from=enb-build \
+COPY --from=enb-base \
     /usr/lib/x86_64-linux-gnu/libboost_date_time.so.1.65.1 \
     /usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.65.1 \
     /usr/lib/x86_64-linux-gnu/libboost_regex.so.1.65.1 \

--- a/docker/Dockerfile.gNB.ubuntu18
+++ b/docker/Dockerfile.gNB.ubuntu18
@@ -25,17 +25,9 @@
 #
 #---------------------------------------------------------------------

-FROM ran-build:latest AS gnb-build
-
-RUN rm -Rf /oai-ran
-WORKDIR /oai-ran
-COPY . .
+FROM ran-base:latest as gnb-base

-#run build_oai to build the target image
-RUN /bin/sh oaienv && \ 
-    cd cmake_targets && \
-    mkdir -p log && \
-    ./build_oai --gNB --ninja -w USRP --verbose-ci
+FROM ran-build:latest AS gnb-build

 RUN python3 ./docker/scripts/generateTemplate.py ./docker/scripts/gnb_parameters.yaml && \
    cp /oai-ran/docker/scripts/gnb_entrypoint.sh /oai-ran/docker/scripts/entrypoint.sh
@@ -87,15 +79,17 @@ COPY --from=gnb-build \
    /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \
    /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \
    /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \
-    /usr/local/lib/libprotobuf-c.so.1 \
    ./

 # Now we are copying from builder-image the UHD files.
-COPY --from=gnb-build /usr/local/bin/uhd_find_devices /usr/local/bin
-COPY --from=gnb-build /usr/local/lib/libuhd.so.3.15.0 /usr/local/lib
-COPY --from=gnb-build /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-gnb/bin
+COPY --from=gnb-base /usr/local/bin/uhd_find_devices /usr/local/bin
+COPY --from=gnb-base \
+     /usr/local/lib/libuhd.so.3.15.0 \
+     /usr/local/lib/libprotobuf-c.so.1 \
+     /usr/local/lib/
+COPY --from=gnb-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-gnb/bin
 WORKDIR /usr/lib/x86_64-linux-gnu
-COPY --from=gnb-build \
+COPY --from=gnb-base \
    /usr/lib/x86_64-linux-gnu/libboost_date_time.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_regex.so.1.65.1 \

--- a/docker/Dockerfile.lteRU.ubuntu18
+++ b/docker/Dockerfile.lteRU.ubuntu18
@@ -25,17 +25,9 @@
 #
 #---------------------------------------------------------------------

-FROM ran-build:latest AS ru-build
-
-RUN rm -Rf /oai-ran
-WORKDIR /oai-ran
-COPY . .
+FROM ran-base:latest as ru-base

-#run build_oai to build the target image
-RUN /bin/sh oaienv && \
-    cd cmake_targets && \
-    mkdir -p log && \
-    ./build_oai --RU --ninja -w USRP --verbose-ci
+FROM ran-build:latest AS ru-build

 RUN python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml && \
    cp /oai-ran/docker/scripts/lte_ru_entrypoint.sh /oai-ran/docker/scripts/entrypoint.sh
@@ -81,12 +73,12 @@ COPY --from=ru-build \
    ./

 # Now we are copying from builder-image the UHD files.
-COPY --from=ru-build /usr/local/bin/uhd_find_devices /usr/local/bin
-COPY --from=ru-build /usr/local/lib/libuhd.so.3.15.0 /usr/local/lib
-COPY --from=ru-build /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-lte-ru/bin
+COPY --from=ru-base /usr/local/bin/uhd_find_devices /usr/local/bin
+COPY --from=ru-base /usr/local/lib/libuhd.so.3.15.0 /usr/local/lib
+COPY --from=ru-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-lte-ru/bin

 WORKDIR /usr/lib/x86_64-linux-gnu
-COPY --from=ru-build \
+COPY --from=ru-base \
    /usr/lib/x86_64-linux-gnu/libboost_date_time.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_regex.so.1.65.1 \

--- a/docker/Dockerfile.lteUE.ubuntu18
+++ b/docker/Dockerfile.lteUE.ubuntu18
@@ -25,17 +25,9 @@
 #
 #---------------------------------------------------------------------

-FROM ran-build:latest AS lte-ue-build 
-
-RUN rm -Rf /oai-ran
-WORKDIR /oai-ran
-COPY . .
+FROM ran-base:latest AS lte-ue-base

-#run build_oai to build the target image
-RUN /bin/sh oaienv && \ 
-    cd cmake_targets && \
-    mkdir -p log && \
-    ./build_oai --UE --ninja -w USRP --verbose-ci
+FROM ran-build:latest AS lte-ue-build 

 RUN python3 ./docker/scripts/generateTemplate.py ./docker/scripts/lte_ue_parameters.yaml && \
    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/lte_ue_sim_parameters.yaml && \
@@ -89,16 +81,18 @@ COPY --from=lte-ue-build \
    /oai-ran/targets/bin/libparams_libconfig.so \
    /oai-ran/cmake_targets/ran_build/build/libSIMU.so \
    /oai-ran/cmake_targets/ran_build/build/libdfts.so \
-    /usr/local/lib/libprotobuf-c.so.1 \
    ./

 # Now we are copying from builder-image the UHD files.
-COPY --from=lte-ue-build /usr/local/bin/uhd_find_devices /usr/local/bin
-COPY --from=lte-ue-build /usr/local/lib/libuhd.so.3.15.0 /usr/local/lib
-COPY --from=lte-ue-build /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-lte-ue/bin
+COPY --from=lte-ue-base /usr/local/bin/uhd_find_devices /usr/local/bin
+COPY --from=lte-ue-base \
+     /usr/local/lib/libuhd.so.3.15.0 \
+     /usr/local/lib/libprotobuf-c.so.1 \
+     /usr/local/lib/
+COPY --from=lte-ue-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-lte-ue/bin

 WORKDIR /usr/lib/x86_64-linux-gnu
-COPY --from=lte-ue-build \
+COPY --from=lte-ue-base \
    /usr/lib/x86_64-linux-gnu/libboost_date_time.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_regex.so.1.65.1 \

--- a/docker/Dockerfile.nrUE.ubuntu18
+++ b/docker/Dockerfile.nrUE.ubuntu18
@@ -25,18 +25,11 @@
 #
 #---------------------------------------------------------------------

-FROM ran-build:latest AS nr-ue-build
+FROM ran-base:latest AS nr-ue-base

-RUN rm -Rf /oai-ran
-WORKDIR /oai-ran
-COPY . .
+FROM ran-build:latest AS nr-ue-build

-#run build_oai to build the target image
-RUN /bin/sh oaienv && \ 
-    cd cmake_targets && \
-    mkdir -p log && \
-    ./build_oai --nrUE --ninja -w USRP --verbose-ci && \
-    cp /oai-ran/docker/scripts/nr_ue_entrypoint.sh /oai-ran/docker/scripts/entrypoint.sh
+RUN cp /oai-ran/docker/scripts/nr_ue_entrypoint.sh /oai-ran/docker/scripts/entrypoint.sh

 #start from scratch for target executable
 FROM ubuntu:bionic as oai-nr-ue
@@ -89,16 +82,18 @@ COPY --from=nr-ue-build \
    /oai-ran/cmake_targets/ran_build/build/libldpc_optim.so \
    /oai-ran/cmake_targets/ran_build/build/libldpc_optim8seg.so \
    /oai-ran/cmake_targets/ran_build/build/libldpc_orig.so \
-    /usr/local/lib/libprotobuf-c.so.1 \
    ./

 # Now we are copying from builder-image the UHD files.
-COPY --from=nr-ue-build /usr/local/bin/uhd_find_devices /usr/local/bin
-COPY --from=nr-ue-build /usr/local/lib/libuhd.so.3.15.0 /usr/local/lib
-COPY --from=nr-ue-build /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-nr-ue/bin
+COPY --from=nr-ue-base /usr/local/bin/uhd_find_devices /usr/local/bin
+COPY --from=nr-ue-base \
+     /usr/local/lib/libuhd.so.3.15.0 \
+     /usr/local/lib/libprotobuf-c.so.1 \
+     /usr/local/lib/
+COPY --from=nr-ue-base /usr/local/lib/uhd/utils/uhd_images_downloader.py /opt/oai-nr-ue/bin

 WORKDIR /usr/lib/x86_64-linux-gnu
-COPY --from=nr-ue-build \
+COPY --from=nr-ue-base \
    /usr/lib/x86_64-linux-gnu/libboost_date_time.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_filesystem.so.1.65.1 \
    /usr/lib/x86_64-linux-gnu/libboost_regex.so.1.65.1 \