Commit 93392c3e authored by laurent's avatar laurent

issue 384

parent 7ca45eb9
......@@ -2154,7 +2154,6 @@ add_executable(test_epc_generate_scenario
${OPENAIR2_DIR}/ENB_APP/enb_config.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR3_DIR}/S1AP/s1ap_eNB_defs.h
)
target_link_libraries (test_epc_generate_scenario
......@@ -2174,7 +2173,6 @@ add_executable(test_epc_play_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
)
target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
target_link_libraries (test_epc_play_scenario
......
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "PHY/types.h"
#include "PHY/defs_UE.h"
#include "PHY/phy_extern_ue.h"
#include "UTIL/LOG/vcd_signal_dumper.h"
#include "openair2/LAYER2/MAC/mac_proto.h"
#define DEBUG_PHY
// Adjust location synchronization point to account for drift
// The adjustment is performed once per frame based on the
// last channel estimate of the receiver
void lte_adjust_synch(LTE_DL_FRAME_PARMS *frame_parms,
PHY_VARS_UE *ue,
module_id_t eNB_id,
uint8_t subframe,
unsigned char clear,
short coef)
{
static int max_pos_fil = 0;
static int count_max_pos_ok = 0;
static int first_time = 1;
int temp = 0, i, aa, max_val = 0, max_pos = 0;
int diff;
short Re,Im,ncoef;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_ADJUST_SYNCH, VCD_FUNCTION_IN);
ncoef = 32767 - coef;
#ifdef DEBUG_PHY
LOG_D(PHY,"AbsSubframe %d.%d: rx_offset (before) = %d\n",ue->proc.proc_rxtx[0].frame_rx%1024,subframe,ue->rx_offset);
#endif //DEBUG_PHY
// we only use channel estimates from tx antenna 0 here
for (i = 0; i < frame_parms->nb_prefix_samples; i++) {
temp = 0;
for (aa=0; aa<frame_parms->nb_antennas_rx; aa++) {
Re = ((int16_t*)ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].dl_ch_estimates_time[eNB_id][aa])[(i<<1)];
Im = ((int16_t*)ue->common_vars.common_vars_rx_data_per_thread[ue->current_thread_id[subframe]].dl_ch_estimates_time[eNB_id][aa])[1+(i<<1)];
temp += (Re*Re/2) + (Im*Im/2);
}
if (temp > max_val) {
max_pos = i;
max_val = temp;
}
}
// filter position to reduce jitter
if (clear == 1)
max_pos_fil = max_pos;
else
max_pos_fil = ((max_pos_fil * coef) + (max_pos * ncoef)) >> 15;
// do not filter to have proactive timing adjustment
max_pos_fil = max_pos;
if(subframe == 5)
{
diff = max_pos_fil - (frame_parms->nb_prefix_samples>>3);
#if BASIC_SIMULATOR
/* a hack without which the UE does not connect (to be fixed somehow) */
diff = 0;
#endif
if ( abs(diff) < SYNCH_HYST )
ue->rx_offset = 0;
else
ue->rx_offset = diff;
if(abs(diff)<5)
count_max_pos_ok ++;
else
count_max_pos_ok = 0;
if(count_max_pos_ok > 10 && first_time == 1)
{
first_time = 0;
ue->time_sync_cell = 1;
if (ue->mac_enabled==1) {
LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",ue->Mod_id);
//mac_resynch();
dl_phy_sync_success(ue->Mod_id,ue->proc.proc_rxtx[0].frame_rx,0,1);//ue->common_vars.eNb_id);
ue->UE_mode[0] = PRACH;
}
else {
ue->UE_mode[0] = PUSCH;
}
}
if ( ue->rx_offset < 0 )
ue->rx_offset += FRAME_LENGTH_COMPLEX_SAMPLES;
if ( ue->rx_offset >= FRAME_LENGTH_COMPLEX_SAMPLES )
ue->rx_offset -= FRAME_LENGTH_COMPLEX_SAMPLES;
#ifdef DEBUG_PHY
LOG_D(PHY,"AbsSubframe %d.%d: ThreadId %d diff =%i rx_offset (final) = %i : clear %d,max_pos = %d,max_pos_fil = %d (peak %d) max_val %d target_pos %d \n",
ue->proc.proc_rxtx[ue->current_thread_id[subframe]].frame_rx,
subframe,
ue->current_thread_id[subframe],
diff,
ue->rx_offset,
clear,
max_pos,
max_pos_fil,
temp,max_val,
(frame_parms->nb_prefix_samples>>3));
#endif //DEBUG_PHY
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_UE_ADJUST_SYNCH, VCD_FUNCTION_OUT);
}
}
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#define modOrder(I_MCS,I_TBS) ((I_MCS-I_TBS)*2+2) // Find modulation order from I_TBS and I_MCS
/** \fn unsigned char I_TBS2I_MCS(unsigned char I_TBS);
\brief This function maps I_tbs to I_mcs according to Table 7.1.7.1-1 in 3GPP TS 36.213 V8.6.0. Where there is two supported modulation orders for the same I_TBS then either high or low modulation is chosen by changing the equality of the two first comparisons in the if-else statement.
\param I_TBS Index of Transport Block Size
\return I_MCS given I_TBS
*/
unsigned char I_TBS2I_MCS(unsigned char I_TBS);
/** \fn unsigned char SE2I_TBS(float SE,
unsigned char N_PRB,
unsigned char symbPerRB);
\brief This function maps a requested throughput in number of bits to I_tbs. The throughput is calculated as a function of modulation order, RB allocation and number of symbols per RB. The mapping orginates in the "Transport block size table" (Table 7.1.7.2.1-1 in 3GPP TS 36.213 V8.6.0)
\param SE Spectral Efficiency (before casting to integer, multiply by 1024, remember to divide result by 1024!)
\param N_PRB Number of PhysicalResourceBlocks allocated \sa lte_frame_parms->N_RB_DL
\param symbPerRB Number of symbols per resource block allocated to this channel
\return I_TBS given an SE and an N_PRB
*/
unsigned char SE2I_TBS(float SE,
unsigned char N_PRB,
unsigned char symbPerRB);
......@@ -457,14 +457,6 @@ void generate_pcfich(uint8_t num_pdcch_symbols,
int32_t **txdataF,
uint8_t subframe);
void init_transport_channels(uint8_t);
void rx_ulsch(PHY_VARS_eNB *eNB,
L1_rxtx_proc_t *proc,
uint8_t UE_id);
......
......@@ -1438,8 +1438,6 @@ uint8_t rx_pcfich(LTE_DL_FRAME_PARMS *frame_parms,
void generate_phich_reg_mapping(LTE_DL_FRAME_PARMS *frame_parms);
void init_transport_channels(uint8_t);
void generate_RIV_tables(void);
/*!
......
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
int16_t sig625_1_25MHz[2850*2];
int16_t sig625_2_5MHz[5700*2];
int16_t sig625_5MHz[11400*2];
int16_t sig625_10MHz[22800*2];
int16_t sig625_15MHz[34200*2];
int16_t sig625_20MHz[45600*2];
PHY_OBJS = $(TOP_DIR)/PHY/LTE_TRANSPORT/pss.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/sss.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pilots.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pilots_ue_spec.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pilots_mbsfn.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_coding.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_modulation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_demodulation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_llr_computation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_llr_computation_avx2.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/power_control.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_decoding.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dlsch_scrambling.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dci_tools.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/uci_tools.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/lte_mcs.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pbch.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/dci.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/phich.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pcfich.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pucch.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/prach.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/pmch.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/group_hopping.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/srs_modulation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/drs_modulation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/ulsch_modulation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/ulsch_demodulation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/ulsch_coding.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/ulsch_decoding.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/rar_tools.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/print_stats.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/initial_sync.o
#PHY_OBJS += $(TOP_DIR)/PHY/LTE_TRANSPORT/lte_transport_init.o
PHY_OBJS += $(TOP_DIR)/PHY/MODULATION/ofdm_mod.o
PHY_OBJS += $(TOP_DIR)/PHY/MODULATION/slot_fep.o
PHY_OBJS += $(TOP_DIR)/PHY/MODULATION/slot_fep_mbsfn.o
PHY_OBJS += $(TOP_DIR)/PHY/MODULATION/slot_fep_ul.o
PHY_OBJS += $(TOP_DIR)/PHY/MODULATION/ul_7_5_kHz.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/freq_equalization.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_sync_time.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_sync_timefreq.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_adjust_sync.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_dl_channel_estimation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_dl_bf_channel_estimation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_dl_mbsfn_channel_estimation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_est_freq_offset.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_ue_measurements.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/lte_eNB_measurements.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_ESTIMATION/adjust_gain.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_REFSIG/lte_dl_cell_spec.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_REFSIG/lte_dl_ue_spec.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_REFSIG/lte_gold.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_REFSIG/lte_gold_mbsfn.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_REFSIG/lte_dl_mbsfn.o
PHY_OBJS += $(TOP_DIR)/PHY/LTE_REFSIG/lte_ul_ref.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/lte_segmentation.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/ccoding_byte.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/ccoding_byte_lte.o
#PHY_OBJS += $(TOP_DIR)/PHY/CODING/3gpplte.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/3gpplte_sse.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/crc_byte.o
#PHY_OBJS += $(TOP_DIR)/PHY/CODING/3gpplte_turbo_decoder_sse.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/3gpplte_turbo_decoder_sse_8bit.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/3gpplte_turbo_decoder_sse_16bit.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/lte_rate_matching.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/rate_matching.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/viterbi.o
PHY_OBJS += $(TOP_DIR)/PHY/CODING/viterbi_lte.o
PHY_OBJS += $(TOP_DIR)/PHY/INIT/lte_init.o
PHY_OBJS += $(TOP_DIR)/PHY/INIT/lte_parms.o
PHY_OBJS += $(TOP_DIR)/PHY/INIT/init_top.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/file_output.o
#PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/fft.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/lte_dfts.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/log2_approx.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/cmult_sv.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/cmult_vv.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/cadd_vv.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/cdot_prod.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/signal_energy.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/dB_routines.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/sqrt.o
ifdef SMBV
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/smbv.o
endif
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/time_meas.o
PHY_OBJS += $(TOP_DIR)/PHY/TOOLS/lut.o
#PHY_OBJS += $(TOP_DIR)/SIMULATION/TOOLS/rangen_double.o
SCHED_OBJS = $(TOP_DIR)/SCHED/phy_procedures_lte_common.o
SCHED_OBJS += $(TOP_DIR)/SCHED/phy_procedures_lte_ue.o
SCHED_OBJS += $(TOP_DIR)/SCHED/phy_procedures_lte_eNb.o
SCHED_OBJS += $(TOP_DIR)/SCHED/pusch_pc.o
SCHED_OBJS += $(TOP_DIR)/SCHED/pucch_pc.o
SCHED_OBJS += $(TOP_DIR)/SCHED/srs_pc.o
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*
* intertask_interface_conf.h
*
* Created on: Oct 21, 2013
* Author: winckel
*/
#ifndef INTERTASK_INTERFACE_CONF_H_
#define INTERTASK_INTERFACE_CONF_H_
/*******************************************************************************
* Intertask Interface Constants
******************************************************************************/
#define ITTI_PORT (10006)
/* This is the queue size for signal dumper */
#define ITTI_QUEUE_MAX_ELEMENTS (10 * 1000)
#define ITTI_DUMP_MAX_CON (5) /* Max connections in parallel */
#endif /* INTERTASK_INTERFACE_CONF_H_ */
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*
* messages_types.h
*
* Created on: Oct 14, 2013
* Author: winckel
*/
#ifndef MESSAGES_TYPES_H_
#define MESSAGES_TYPES_H_
#include "intertask_messages_types.h"
#include "timer_messages_types.h"
#include "phy_messages_types.h"
#include "mac_messages_types.h"
#include "rlc_messages_types.h"
#include "pdcp_messages_types.h"
#include "rrc_messages_types.h"
#include "nas_messages_types.h"
#if ENABLE_RAL
#include "ral_messages_types.h"
#endif
#include "s1ap_messages_types.h"
#include "x2ap_messages_types.h"
#include "sctp_messages_types.h"
#include "udp_messages_types.h"
#include "gtpv1_u_messages_types.h"
#endif /* MESSAGES_TYPES_H_ */
ENB_APP_DIR = $(OPENAIR2_TOP)/ENB_APP
ENB_APP_OBJS = $(ENB_APP_DIR)/enb_app.o \
$(ENB_APP_DIR)/enb_config.o
ENB_APP_incl = \
-I$(ENB_APP_DIR) -I$(OPENAIR2_TOP)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#define UL_RB_ALLOC mac_xface->computeRIV(mac_xface->frame_parms->N_RB_UL,0,24)
#define BCCH_RB_ALLOC mac_xface->computeRIV(mac_xface->frame_parms->N_RB_UL,0,4)
#define RA_RB_ALLOC mac_xface->computeRIV(mac_xface->frame_parms->N_RB_UL,0,4)
#define DLSCH_RB_ALLOC 0x1fff
#include "extern.h"
void init_transport_channels(unsigned char transmission_mode)
{
// init DCI structures for testing
UL_alloc_pdu.type = 0;
UL_alloc_pdu.hopping = 0;
UL_alloc_pdu.rballoc = UL_RB_ALLOC;
UL_alloc_pdu.mcs = 2;
UL_alloc_pdu.ndi = 1;
UL_alloc_pdu.TPC = 0;
UL_alloc_pdu.cqi_req = 1;
/*
BCCH_alloc_pdu.type = 1;
BCCH_alloc_pdu.vrb_type = 0;
BCCH_alloc_pdu.rballoc = BCCH_RB_ALLOC;
BCCH_alloc_pdu.ndi = 1;
BCCH_alloc_pdu.rv = 1;
BCCH_alloc_pdu.mcs = 1;
BCCH_alloc_pdu.harq_pid = 0;
BCCH_alloc_pdu.TPC = 1; // set to 3 PRB
// for FDD mode
BCCH_alloc_pdu_fdd.type = 1;
BCCH_alloc_pdu_fdd.vrb_type = 0;
BCCH_alloc_pdu_fdd.rballoc = BCCH_RB_ALLOC;
BCCH_alloc_pdu_fdd.ndi = 1;
BCCH_alloc_pdu_fdd.rv = 1;
BCCH_alloc_pdu_fdd.mcs = 1;
BCCH_alloc_pdu_fdd.harq_pid = 0;
BCCH_alloc_pdu_fdd.TPC = 1; // set to 3 PRB
*/
DLSCH_alloc_pdu1A.type = 1;
DLSCH_alloc_pdu1A.vrb_type = 0;
DLSCH_alloc_pdu1A.rballoc = BCCH_RB_ALLOC;
DLSCH_alloc_pdu1A.ndi = 1;
DLSCH_alloc_pdu1A.rv = 1;
DLSCH_alloc_pdu1A.mcs = 2;
DLSCH_alloc_pdu1A.harq_pid = 0;
DLSCH_alloc_pdu1A.TPC = 1; // set to 3 PRB
DLSCH_alloc_pdu1A_fdd.type = 1;
DLSCH_alloc_pdu1A_fdd.vrb_type = 0;
DLSCH_alloc_pdu1A_fdd.rballoc = BCCH_RB_ALLOC;
DLSCH_alloc_pdu1A_fdd.ndi = 1;
DLSCH_alloc_pdu1A_fdd.rv = 1;
DLSCH_alloc_pdu1A_fdd.mcs = 2;
DLSCH_alloc_pdu1A_fdd.harq_pid = 0;
DLSCH_alloc_pdu1A_fdd.TPC = 1; // set to 3 PRB
RA_alloc_pdu.type = 1;
RA_alloc_pdu.vrb_type = 0;
RA_alloc_pdu.rballoc = RA_RB_ALLOC;
RA_alloc_pdu.ndi = 1;
RA_alloc_pdu.rv = 0;
RA_alloc_pdu.mcs = 0;
RA_alloc_pdu.harq_pid = 0;
RA_alloc_pdu.TPC = 1;
RA_alloc_pdu_fdd.type = 1;
RA_alloc_pdu_fdd.vrb_type = 0;
RA_alloc_pdu_fdd.rballoc = RA_RB_ALLOC;
RA_alloc_pdu_fdd.ndi = 1;
RA_alloc_pdu_fdd.rv = 1;
RA_alloc_pdu_fdd.mcs = 1;
RA_alloc_pdu_fdd.harq_pid = 0;
RA_alloc_pdu_fdd.TPC = 1;
DLSCH_alloc_pdu1.rballoc = 0xf;
DLSCH_alloc_pdu1.TPC = 0;
DLSCH_alloc_pdu1.dai = 0;
DLSCH_alloc_pdu1.harq_pid = 0;
DLSCH_alloc_pdu1.tb_swap = 0;
DLSCH_alloc_pdu1.mcs1 = 4;
DLSCH_alloc_pdu1.ndi1 = 1;
DLSCH_alloc_pdu1.rv1 = 0;
// Forget second codeword
if (transmission_mode == 6) {
DLSCH_alloc_pdu1.tpmi = 5; // PUSCH_PRECODING0
} else {
DLSCH_alloc_pdu1.tpmi = 0;
}
DLSCH_alloc_pdu2.rah = 0;
DLSCH_alloc_pdu2.rballoc = DLSCH_RB_ALLOC;
DLSCH_alloc_pdu2.TPC = 0;
DLSCH_alloc_pdu2.dai = 0;
DLSCH_alloc_pdu2.harq_pid = 0;
DLSCH_alloc_pdu2.tb_swap = 0;
DLSCH_alloc_pdu2.mcs1 = 4;
DLSCH_alloc_pdu2.ndi1 = 1;
DLSCH_alloc_pdu2.rv1 = 0;
// Forget second codeword
if (transmission_mode == 6) {
DLSCH_alloc_pdu2.tpmi = 5; // PUSCH_PRECODING0
} else {
DLSCH_alloc_pdu2.tpmi = 0;
}
}
ifeq ($(OPENAIR2),1)
EXTRA_CFLAGS += -DOPENAIR2
endif
EXTRA_CFLAGS += -DASSERT
EXTRA_CFLAGS += -DNO_RRM
COMMON_DIR = $(OPENAIR2_TOP)/COMMON
L2_INTERFACE_DIR = $(OPENAIR2_TOP)/RRC/L2_INTERFACE
RLC_UM_DIR = $(OPENAIR2_TOP)/LAYER2/RLC/UM_v9.3.0
RLC_AM_DIR = $(OPENAIR2_TOP)/LAYER2/RLC/AM_v9.3.0
RLC_TM_DIR = $(OPENAIR2_TOP)/LAYER2/RLC/TM_v9.3.0
RLC_DIR = $(OPENAIR2_TOP)/LAYER2/RLC
PDCP_DIR = $(OPENAIR2_TOP)/LAYER2/PDCP_v10.1.0
PHY_INTERFACE_DIR = $(OPENAIR2_TOP)/PHY_INTERFACE
RRC_DIR = $(OPENAIR2_TOP)/RRC/LITE
L2_INTERFACE_DIR = $(OPENAIR2_TOP)/RRC/L2_INTERFACE
MAC_DIR = $(OPENAIR2_TOP)/LAYER2/MAC
RRC_CELL_DIR = $(OPENAIR2_TOP)/RRC/CELLULAR
SOURCES_L2 += $(OPENAIR2_TOP)/LAYER2/openair2_proc.c
SOURCES_L2 += $(PDCP_DIR)/pdcp.c
SOURCES_L2 += $(PDCP_DIR)/pdcp_fifo.c
SOURCES_L2 += $(PDCP_DIR)/pdcp_sequence_manager.c
SOURCES_L2 += $(PDCP_DIR)/pdcp_primitives.c
SOURCES_L2 += $(PDCP_DIR)/pdcp_util.c
SOURCES_L2 += $(PDCP_DIR)/pdcp_security.c
SOURCES_L2 += $(PDCP_DIR)/pdcp_netlink.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_init.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_timer_poll_retransmit.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_timer_reordering.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_timer_status_prohibit.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_segment.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_segments_holes.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_in_sdu.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_receiver.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_retransmit.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_windows.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_rx_list.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_reassembly.c
SOURCES_L2 += $(RLC_AM_DIR)/rlc_am_status_report.c
SOURCES_L2 += $(RLC_TM_DIR)/rlc_tm.c
SOURCES_L2 += $(RLC_TM_DIR)/rlc_tm_init.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um_fsm.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um_control_primitives.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um_segment.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um_reassembly.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um_receiver.c
SOURCES_L2 += $(RLC_UM_DIR)/rlc_um_dar.c
SOURCES_L2 += $(RLC_DIR)/rlc_mac.c
SOURCES_L2 += $(RLC_DIR)/rlc.c
SOURCES_L2 += $(RLC_DIR)/rlc_rrc.c
SOURCES_L2 += $(RLC_DIR)/rlc_mpls.c
RRC_OBJS = $(RRC_DIR)/rrc_UE.o
ifeq ($(ENABLE_RAL),1)
RRC_OBJS += $(RRC_DIR)/rrc_UE_ral.o
RRC_OBJS += $(RRC_DIR)/rrc_eNB_ral.o
endif
RRC_OBJS += $(RRC_DIR)/rrc_eNB.o
RRC_OBJS += $(RRC_DIR)/rrc_eNB_UE_context.o
RRC_OBJS += $(RRC_DIR)/rrc_eNB_S1AP.o
ifdef USE_MME
RRC_OBJS += $(RRC_DIR)/rrc_eNB_GTPV1U.o
endif
RRC_OBJS += $(RRC_DIR)/rrc_common.o
RRC_OBJS += $(RRC_DIR)/L2_interface.o
MAC_OBJS = $(MAC_DIR)/lte_transport_init.o
MAC_OBJS += $(MAC_DIR)/main.o
MAC_OBJS += $(MAC_DIR)/ue_procedures.o
MAC_OBJS += $(MAC_DIR)/ra_procedures.o
MAC_OBJS += $(MAC_DIR)/l1_helpers.o
MAC_OBJS += $(MAC_DIR)/rar_tools.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler_dlsch.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler_ulsch.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler_mch.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler_bch.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler_primitives.o
MAC_OBJS += $(MAC_DIR)/eNB_scheduler_RA.o
MAC_OBJS += $(MAC_DIR)/pre_processor.o
MAC_OBJS += $(MAC_DIR)/config.o
L2_INTERFACE_OBJS = $(L2_INTERFACE_DIR)/openair_rrc_L2_interface.o
L2_OBJS=$(addsuffix .o,$(basename $(SOURCES_L2))) $(PHY_INTERFACE_OBJS) $(MAC_OBJS) $(L2_INTERFACE_OBJS)
L2_incl = -I$(OPENAIR2_TOP)
L2_incl = -I$(OPENAIR_DIR)/common/utils/msc
L2_incl += -I$(COMMON_DIR)
L2_incl += -I$(RLC_DIR)
L2_incl += -I$(RLC_AM_DIR)
L2_incl += -I$(RLC_UM_DIR)
L2_incl += -I$(RLC_TM_DIR)
L2_incl += -I$(PDCP_DIR)
L2_incl += -I$(OPENAIR3)/MESH
L2_incl += -I$(OPENAIR2_TOP)/RRC/LITE/MESSAGES
L2_incl += -I$(OPENAIR3)/MESH/RRM
ifeq ($(rrc_cellular),1)
include $(RRC_CELL_DIR)/Makefile.inc
L2_OBJS += $(RRC_CELLULAR_OBJS)
L2_incl += -I$(OPENAIR2_TOP)/RRC/CELLULAR
EXTRA_CFLAGS += -DRRC_CELLULAR -DCELLULAR
else
L2_OBJS += $(RRC_OBJS)
L2_incl += -I$(OPENAIR2_TOP)/RRC/LITE
endif
CFLAGS += -I$(RLC_DIR)
CFLAGS += -I$(RLC_UM_DIR)
CFLAGS += -I$(RLC_AM_DIR)
CFLAGS += -I$(COMMON_DIR)
CFLAGS += -I$(TRACE_DIR)
CFLAGS += -I$(LISTS_DIR)
CFLAGS += -I$(MEM_DIR)
DEBUG_FLAGS += -O2
OBJ = rlc_um.o rlc_um_segment.o
############################################################
#
# The following should be identical in all Makefiles
#
#define the target object files
ifdef TARGETDIR
TARGETOBJ = $(addprefix ${TARGETDIR}/, ${OBJ})
TARGETLIB = ${TARGETDIR}/Lib.a
endif
include $(TARGETOBJ:.o=.d)
# Look for source files in the parent directory
%.o: ../%.c %.d
$(CCC) -c ${DEBUG_FLAGS} ${CFLAGS} ${INCLUDE} -o $@ $<
# Rule to remake and keep the .d dependency Makefiles
# Note that the sed command includes adding the TARGETDIR
# and that ! is used for s delimiter
%.d: ../%.c
$(SHELL) -ec '$(CCC) -MM $(CFLAGS) $< \
| sed '\''s!\($(*F)\)\.o[ :]*!$(TARGETDIR)/\1.o $@ : !g'\'' > $@ ;\
[ -s $@ ] || rm -f $@'
.PRECIOUS: %.d
all: ${TARGETLIB}
${TARGETLIB}: ${TARGETOBJ}
ar -rv ${TARGETLIB} ${TARGETOBJ}
clean:
rm -f ${TARGETDIR}/*.o ${TARGETDIR}/*.a
clean_dep:
rm -f ${TARGETDIR}/*.d
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*________________________rrc_register.h________________________
Authors : Hicham Anouar, Raymond Knopp
Company : EURECOM
Emails : anouar@eurecom.fr, knopp@eurecom.fr
________________________________________________________________*/
#ifndef __MAC_RRC_REGISTER_H__
# define __MAC_RRC_REGISTER_H__
#include "COMMON/mac_rrc_primitives.h"
/** @defgroup _mac_impl_register RRC Registration interface
* @ingroup _mac_impl_
*@{
*/
MAC_RLC_XFACE* mac_rrc_register(RRC_XFACE* RRC_xface);
int mac_rrc_unregister(RRC_XFACE *RRC_xface);
#endif
current_release_asn1_module=$(strip $(notdir $(wildcard $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-*)))
ifdef CBA
COMMON_CFLAGS += -DRel10
COMMON_CFLAGS += -DCBA
ifneq ($(current_release_asn1_module), .lock-rel10-cba)
tmp3:=$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
rm -f ${ASN_MODULE_SOURCES} $(ASN_MODULE_HEADERS) *.o *.d ;\
cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/ ;\
rm EUTRA-RRC-Definitions.asn ;\
ln -s EUTRA-RRC-Definitions-a20-lola.asn EUTRA-RRC-Definitions.asn ; \
cd $(OPENAIR_TARGETS)/SIMU/USER/ ;\
rm -f $(ASN1_MSG_OBJS1) ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample ;\
rm -f $(L2_OBJS) ;\
rm -f *.o ;\
rm -f oaisim ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-* ;\
touch $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10-cba ;\
/bin/bash $(OPENAIR_TARGETS)/SCRIPTS/asn1_generate_rrc_messaging_c_code.bash ;\
cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
awk '/converter-sample.c/ {exit} // {print}' Makefile.am.sample > Makefile.inc.generated )
endif
else ifdef Rel10
COMMON_CFLAGS += -DRel10
ifneq ($(current_release_asn1_module), .lock-rel10)
tmp3:=$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
rm -f ${ASN_MODULE_SOURCES} $(ASN_MODULE_HEADERS) *.o *.d ;\
cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/ ;\
rm EUTRA-RRC-Definitions.asn ;\
ln -s EUTRA-RRC-Definitions-a20.asn EUTRA-RRC-Definitions.asn ;\
cd $(OPENAIR_TARGETS)/SIMU/USER/ ;\
rm -f $(ASN1_MSG_OBJS1) ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample ;\
rm -f $(L2_OBJS) ;\
rm -f *.o ;\
rm -f oaisim ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-* ;\
touch $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel10 ;\
/bin/bash $(OPENAIR_TARGETS)/SCRIPTS/asn1_generate_rrc_messaging_c_code.bash ;\
cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
awk '/converter-sample.c/ {exit} // {print}' Makefile.am.sample > Makefile.inc.generated )
endif
else # default is rel 8
COMMON_CFLAGS += -DRel8
ifneq ($(current_release_asn1_module), .lock-rel8)
tmp3:=$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
rm -f ${ASN_MODULE_SOURCES} $(ASN_MODULE_HEADERS) *.o *.d ;\
cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/ ;\
rm EUTRA-RRC-Definitions.asn ;\
ln -s EUTRA-RRC-Definitions-86.asn EUTRA-RRC-Definitions.asn ;\
cd $(OPENAIR_TARGETS)/SIMU/USER/ ;\
rm -f $(ASN1_MSG_OBJS1) ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.am.sample ;\
rm -f $(L2_OBJS);\
rm -f *.o ;\
rm -f oaisim ;\
rm -f $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-* ;\
touch $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/asn1c/ASN1_files/.lock-rel8 ;\
/bin/bash $(OPENAIR_TARGETS)/SCRIPTS/asn1_generate_rrc_messaging_c_code.bash ;\
cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
awk '/converter-sample.c/ {exit} // {print}' Makefile.am.sample > Makefile.inc.generated )
endif
endif
tmp:=$(shell cd $(OPENAIR2_DIR)/RRC/LITE/MESSAGES ;\
if [ ! -s Makefile.am.sample ] ; then \
/bin/bash $(OPENAIR_TARGETS)/SCRIPTS/asn1_generate_rrc_messaging_c_code.bash ;\
fi ;\
if [ ! -s Makefile.inc.generated ] ; then \
awk '/converter-sample.c/ {exit} // {print}' Makefile.am.sample > Makefile.inc.generated ;\
fi )
include $(OPENAIR2_DIR)/RRC/LITE/MESSAGES/Makefile.inc.generated
ASN_CONVERTER_SOURCES+=asn1_msg.c
#COMMON_CFLAGS += -DEMIT_ASN_DEBUG=1
EXTRA_CFLAGS += -I. -I$(OPENAIR2_DIR)/RRC/LITE/MESSAGES
ASN1_MODULE_OBJS=${ASN_MODULE_SOURCES:.c=.o}
ASN1_CONVERTER_OBJS=${ASN_CONVERTER_SOURCES:.c=.o}
ASN1_MSG_OBJS=$(ASN1_MODULE_OBJS) $(ASN1_CONVERTER_OBJS)
......@@ -115,9 +115,6 @@ extern RAN_CONTEXT_t RC;
#endif
extern eNB_MAC_INST *eNB_mac_inst;
extern UE_MAC_INST *UE_mac_inst;
#ifdef BIGPHYSAREA
extern void *bigphys_malloc(int);
#endif
extern uint16_t two_tier_hexagonal_cellIds[7];
......
......@@ -53,7 +53,6 @@ extern unsigned char NB_INST;
extern unsigned char NB_eNB_INST;
extern unsigned char NB_UE_INST;
extern unsigned short NODE_ID[1];
extern void* bigphys_malloc(int);
#endif
......
#ifeq ($(NAS_FLAG),1)
NAS_OBJS = $(OPENAIR2_TOP)/RRC/NAS/nas_config.o
NAS_OBJS += $(OPENAIR2_TOP)/RRC/NAS/rb_config.o
#endif
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "defs.h"
#include "linux/module.h"
#ifdef BIGPHYSAREA
#ifdef ARCH_64
char *bigphys_ptr,*bigphys_current;
#else //ARCH_64
unsigned int bigphys_ptr,bigphys_current;
#endif //ARCH_64
// return pointer to memory in big physical area aligned to 16 bytes
void* bigphys_malloc(int n)
{
int n2 = n + ((16-(n%16))%16);
#ifdef ARCH_64
char *bigphys_old;
#else
unsigned int bigphys_old;
#endif
printk("[BIGPHYSAREA] Calling bigphys_malloc for %d (%d) bytes\n",n,n2);
#ifdef ARCH_64
printk("[BIGPHYSAREA] Allocated Memory @ %p\n",bigphys_current);
#endif
bigphys_old = bigphys_current;
bigphys_current += n2;
#ifdef ARCH_64
printk("[BIGPHYSAREA] Allocated Memory top now @ %p\n",bigphys_current);
return ((void *)(bigphys_old));
#else //ARCH_64
//printk("[BIGPHYSAREA] Allocated Memory %d\n",bigphys_current-bigphys_ptr);
return ((void *)(bigphys_old));
#endif //ARCH_64
}
EXPORT_SYMBOL(bigphys_malloc);
#endif
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
void* bigphys_malloc(int);
MEM_DIR = $(OPENAIR2_TOP)/UTIL/MEM
LIST_DIR = $(OPENAIR2_TOP)/UTIL/LISTS
FIFO_DIR = $(OPENAIR2_TOP)/UTIL/FIFO
MATH_DIR = $(OPENAIR2_TOP)/UTIL/MATH
TIMER_DIR = $(OPENAIR2_TOP)/UTIL/TIMER
LOG_DIR=$(OPENAIR2_TOP)/UTIL/LOG
OCG_DIR=$(OPENAIR2_TOP)/UTIL/OCG
OPT_DIR=$(OPENAIR2_TOP)/UTIL/OPT
OMG_DIR=$(OPENAIR2_TOP)/UTIL/OMG
OTG_DIR=$(OPENAIR2_TOP)/UTIL/OTG
CLI_DIR=$(OPENAIR2_TOP)/UTIL/CLI
OMV_DIR=$(OPENAIR2_TOP)/UTIL/OMV
LFDS_DIR=$(OPENAIR2_TOP)/UTIL/LFDS/liblfds6.1.1/liblfds611
OSA_DIR=$(OPENAIR2_TOP)/UTIL/OSA
LIST_OBJ = $(LIST_DIR)/list.o
FIFO_OBJ = $(FIFO_DIR)/pad_list.o
LIST_OBJ += $(LIST_DIR)/list2.o
TIMER_OBJ += $(TIMER_DIR)/umts_timer.o
MEM_OBJ += $(MEM_DIR)/mem_block.o
LOG_OBJS = $(LOG_DIR)/log.o
LOG_OBJS += $(LOG_DIR)/vcd_signal_dumper.o
OCG_OBJS = $(OCG_DIR)/OCG.o
OCG_OBJS += $(OCG_DIR)/OCG_create_dir.o
OCG_OBJS += $(OCG_DIR)/OCG_detect_file.o
OCG_OBJS += $(OCG_DIR)/OCG_generate_report.o
OCG_OBJS += $(OCG_DIR)/OCG_parse_filename.o
OCG_OBJS += $(OCG_DIR)/OCG_parse_XML.o
OCG_OBJS += $(OCG_DIR)/OCG_save_XML.o
ifdef SECU
OSA_OBJS = $(OSA_DIR)/osa_key_deriver.o
OSA_OBJS += $(OSA_DIR)/osa_stream_eia.o
OSA_OBJS += $(OSA_DIR)/osa_stream_eea.o
OSA_OBJS += $(OSA_DIR)/osa_snow3g.o
OSA_OBJS += $(OSA_DIR)/osa_rijndael.o
endif
OPT_OBJS = $(OPT_DIR)/probe.o
OMG_OBJS = $(OMG_DIR)/omg.o
OMG_OBJS += $(OMG_DIR)/common.o
OMG_OBJS += $(OMG_DIR)/job.o
OMG_OBJS += $(OMG_DIR)/static.o
OMG_OBJS += $(OMG_DIR)/rwp.o
OMG_OBJS += $(OMG_DIR)/rwalk.o
#OMG_OBJS += $(OMG_DIR)/omg_hashtable.o
OMG_OBJS += $(OMG_DIR)/mobility_parser.o
OMG_OBJS += $(OMG_DIR)/trace.o
OMG_OBJS += $(OMG_DIR)/sumo.o
OMG_OBJS += $(OMG_DIR)/id_manager.o
OMG_OBJS += $(OMG_DIR)/client_traci_OMG.o
OMG_OBJS += $(OMG_DIR)/storage_traci_OMG.o
OMG_OBJS += $(OMG_DIR)/socket_traci_OMG.o
OMG_OBJS += $(OMG_DIR)/steadystaterwp.o
OMG_OBJS += $(OMG_DIR)/grid.o
OMG_OBJS += $(OMG_DIR)/trace_hashtable.o
OTG_OBJS = $(OTG_DIR)/otg_tx.o
OTG_OBJS += $(OTG_DIR)/otg.o
OTG_OBJS += $(OTG_DIR)/otg_rx.o
OTG_OBJS += $(OTG_DIR)/otg_kpi.o
OTG_OBJS += $(OTG_DIR)/otg_form.o
OTG_OBJS += $(OTG_DIR)/otg_models.o
MATH_OBJS = $(MATH_DIR)/oml.o
CLI_OBJ = $(CLI_DIR)/cli_server.o
CLI_OBJ += $(CLI_DIR)/cli.o
CLI_OBJ += $(CLI_DIR)/cli_cmd.o
UTIL_OBJ = \
$(OSA_OBJS) \
$(FIFO_OBJ) \
$(LIST_OBJ) \
$(TIMER_OBJ) \
$(MEM_OBJ) \
$(LOG_OBJS) \
$(OCG_OBJS) \
$(MATH_OBJS) \
$(OTG_OBJS) \
$(CLI_OBJ) \
$(OMG_OBJS) \
$(OPT_OBJS)
UTIL_incl = \
-I$(OPENAIR2_TOP)/UTIL \
-I$(OSA_DIR) \
-I$(LFDS_DIR)/inc \
-I$(MEM_DIR) \
-I$(LIST_DIR) \
-I$(FIFO_DIR) \
-I$(OCG_DIR) \
-I$(LOG_DIR) \
-I$(MATH_DIR) \
-I$(TIMER_DIR) \
-I$(OMG_DIR) \
-I$(OTG_DIR) \
-I$(CLI_DIR) \
-I$(OPT_DIR) \
-I$(OMV_DIR)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/***************************************************************************
umts_timer.c - description
-------------------
AUTHOR : Lionel GAUTHIER
COMPANY : EURECOM
EMAIL : Lionel.Gauthier@eurecom.fr
***************************************************************************/
//#include "rtos_header.h"
#include "platform_types.h"
#include "list.h"
#include "umts_timer_struct.h"
#include "mem_block.h"
#include "openair_defs.h"
//-----------------------------------------------------------------------------
void
umts_timer_check_time_out (list2_t * atimer_listP, uint32_t current_frame_tick_millisecondsP)
{
//-----------------------------------------------------------------------------
struct timer_unit *timer;
mem_block_t *mem_unit;
uint8_t time_out = 255;
mem_unit = atimer_listP->head;
// do it simple now.
while ((mem_unit) && (time_out)) {
timer = (struct timer_unit *) (mem_unit->data);
if ((current_frame_tick_millisecondsP - timer->frame_tick_start) >= timer->frame_time_out) {
mem_unit = list2_remove_head (atimer_listP);
(*(timer->proc)) (timer->protocol, timer->timer_id);
free_mem_block (mem_unit, __func__);
mem_unit = atimer_listP->head;
} else {
time_out = 0;
}
}
}
//-----------------------------------------------------------------------------
void
umts_timer_delete_timer (list2_t * atimer_listP, void *timer_idP)
{
//-----------------------------------------------------------------------------
mem_block_t *mem_unit;
mem_unit = atimer_listP->head;
while ((mem_unit)) {
if (((struct timer_unit *) (mem_unit->data))->timer_id == timer_idP) {
list2_remove_element (mem_unit, atimer_listP);
free_mem_block (mem_unit, __func__);
return;
}
mem_unit = mem_unit->next;
}
}
//-----------------------------------------------------------------------------
mem_block_t *
umts_add_timer_list_up (list2_t * atimer_listP, void (*procP) (void *, void *), void *protocolP, void *timer_idP, uint32_t frame_time_outP, uint32_t current_frame_tick_millisecondsP)
{
//-----------------------------------------------------------------------------
struct mem_block_t *mb;
struct timer_unit *timer;
mem_block_t *mem_unit;
int32_t remaining_time;
uint8_t inserted = 0;
mb = get_free_mem_block (sizeof (struct timer_unit), __func__);
if(mb==NULL) return NULL;
((struct timer_unit *) (mb->data))->proc = procP;
((struct timer_unit *) (mb->data))->protocol = protocolP;
((struct timer_unit *) (mb->data))->timer_id = timer_idP;
((struct timer_unit *) (mb->data))->frame_time_out = frame_time_outP;
((struct timer_unit *) (mb->data))->frame_tick_start = current_frame_tick_millisecondsP;
// insert the timer in list in ascending order
mem_unit = atimer_listP->head;
while ((mem_unit) && (!inserted)) {
timer = (struct timer_unit *) (mem_unit->data);
remaining_time = timer->frame_time_out - current_frame_tick_millisecondsP + timer->frame_tick_start;
// not timed out
if ((remaining_time > 0) && (frame_time_outP < remaining_time)) {
inserted = 255;
if (mem_unit == atimer_listP->head) {
#ifdef DEBUG_TIMER
msg ("[TIMER][CREATION] added timer_id %p at head time out %d current time %d proc %p \n", timer_idP, frame_time_outP, current_frame_tick_millisecondsP, *procP);
#endif
list2_add_head (mb, atimer_listP);
} else {
#ifdef DEBUG_TIMER
msg ("[TIMER][CREATION] inserted timer_id %p time out %d current time %d proc %p \n", timer_idP, frame_time_outP, current_frame_tick_millisecondsP, *procP);
#endif
mb->previous = mem_unit->previous;
mb->next = mem_unit;
mem_unit->previous->next = mb;
mem_unit->previous = mb;
}
} else {
mem_unit = mem_unit->next;
}
}
if (!inserted) {
#ifdef DEBUG_TIMER
msg ("[TIMER][CREATION] added timer_id %p at tail time out %d current time %d proc %p \n", timer_idP, frame_time_outP, current_frame_tick_millisecondsP, *procP);
#endif
list2_add_tail (mb, atimer_listP);
}
return mb;
}
//-----------------------------------------------------------------------------
void
umts_stop_all_timers (list2_t * atimer_listP)
{
//-----------------------------------------------------------------------------
list2_free (atimer_listP);
}
//-----------------------------------------------------------------------------
void
umts_stop_all_timers_except (list2_t * atimer_listP, void (*procP) (void *, void *))
{
//-----------------------------------------------------------------------------
struct timer_unit *timer;
mem_block_t *mem_unit;
mem_block_t *mem_unit_to_delete;
mem_unit = atimer_listP->head;
while ((mem_unit)) {
timer = (struct timer_unit *) (mem_unit->data);
if (timer->proc != procP) {
mem_unit_to_delete = mem_unit;
mem_unit = mem_unit->next;
list2_remove_element (mem_unit_to_delete, atimer_listP);
free_mem_block (mem_unit_to_delete, __func__);
} else {
mem_unit = mem_unit->next;
}
}
}
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/***************************************************************************
umts_timer.h - description
-------------------
AUTHOR : Lionel GAUTHIER
COMPANY : EURECOM
EMAIL : Lionel.Gauthier@eurecom.fr
***************************************************************************/
#ifndef __UMTS_TIMER_H__
# define __UMTS_TIMER_H__
# include "platform_types.h"
# include "lists_proto_extern.h"
# include "mem_mngt_proto_extern.h"
# define UMTS_TIMER_NOT_STARTED 0x00
# define UMTS_TIMER_STARTED 0x01
# define UMTS_TIMER_TIMED_OUT 0x02
void umts_timer_check_time_out (list2_t * atimer_listP, uint32_t current_frame_tick_millisecondsP);
mem_block *umts_add_timer_list_up (list2_t * atimer_listP, void (*procP) (void *, void *), void *protocolP, void *timer_idP, uint32_t frame_time_outP, uint32_t current_frame_tick_millisecondsP);
struct timer_unit {
void (*proc) (void *, void *); // proc executed when time_out
void *protocol; // arg should be a pointer on a allocated protocol entity private struct including its variables
void *timer_id; // arg should be a value or a pointer identifying the timer
// Example: rlc_am_sdu_discard_time_out(rlc_am, sdu)
uint32_t frame_time_out;
uint32_t frame_tick_start;
};
#endif
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/***************************************************************************
umts_timer_proto_extern.h - description
-------------------
AUTHOR : Lionel GAUTHIER
COMPANY : EURECOM
EMAIL : Lionel.Gauthier@eurecom.fr
***************************************************************************/
#ifndef __UMTS_TIMER_PROTO_EXTERN_H__
# define __UMTS_TIMER_PROTO_EXTERN_H__
# include "platform_types.h"
# include "list.h"
# include "mem_block.h"
extern void umts_timer_check_time_out (list2_t * atimer_listP, uint32_t current_frame_tick_millisecondsP);
extern void umts_timer_delete_timer (list2_t * atimer_listP, void *timer_idP);
extern mem_block_t *umts_add_timer_list_up (list2_t * atimer_listP, void (*procP) (void *, void *), void *protocolP, void *timer_idP, uint32_t frame_time_outP,
uint32_t current_frame_tick_millisecondsP);
extern void umts_stop_all_timers (list2_t * atimer_listP);
extern void umts_stop_all_timers_except (list2_t * atimer_listP, void (*procP) (void *, void *));
#endif
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/***************************************************************************
umts_timer_struct.h - description
-------------------
AUTHOR : Lionel GAUTHIER
COMPANY : EURECOM
EMAIL : Lionel.Gauthier@eurecom.fr
***************************************************************************/
#ifndef __UMTS_TIMER_STRUCT_H__
# define __UMTS_TIMER_STRUCT_H__
# include "platform_types.h"
struct timer_unit {
void (*proc) (void *, void *); // proc executed when time_out
void *protocol; // arg should be a pointer on a allocated protocol entity private struct including its variables
void *timer_id; // arg should be a value or a pointer identifying the timer
// Example: rlc_am_sdu_discard_time_out(rlc_am, sdu)
uint32_t frame_time_out;
uint32_t frame_tick_start;
};
#endif
ASN1MESSAGESDIR=$(X2AP_DIR)/MESSAGES
ASN1DIR=$(ASN1MESSAGESDIR)/ASN1
#//ifeq ($(USE_MME), R10)
#// ASN1RELDIR=R10.7
#//else
#//ASN1RELDIR=R11.2
#//endif
# TEMP
ASN1RELDIR=R11.2
include $(ASN1DIR)/$(ASN1RELDIR)/Makefile.inc
libx2ap_OBJECTS = \
x2ap.o \
x2ap_common.o \
$(addprefix MESSAGES/ASN1/$(ASN1RELDIR)/, $(X2AP_ASN_MODULE_SOURCES))
# pull in dependency info for *existing* .o files
-include $(OUTDIR)/*.d
CFLAGS = \
-Wall \
-DENB_MODE \
-DENABLE_USE_MME \
-I. \
-I$(ASN1MESSAGESDIR)/ASN1/$(ASN1RELDIR) \
-I$(ASN1MESSAGESDIR) \
-I$(OUTDIR) \
-I../UTILS \
$(ADD_CFLAGS) \
$(X2AP_CFLAGS) \
-Wuninitialized \
-Werror=implicit-function-declaration
X2AP_GENERATED = \
$(OUTDIR)/x2ap_encoder.o \
$(OUTDIR)/x2ap_decoder.o \
$(OUTDIR)/x2ap_xer_print.o
$(OUTDIR)/%.o : %.c
@echo "Compiling $<"
@echo "Compiling $< with CFLAGS= $(CFLAGS)"
@if [ ! -d $(dir $@) ]; then mkdir -p $(dir $@); fi;
@$(CC) -c $(CFLAGS) -o $@ $<
@$(CC) -MM $(CFLAGS) $< > $(basename $@).d
@mv -f $(basename $@).d $(basename $@).d.tmp
@sed -e 's|.*:|$@:|' < $(basename $@).d.tmp > $(basename $@).d
@sed -e 's/.*://' -e 's/\\$$//' < $(basename $@).d.tmp | fmt -1 | \
sed -e 's/^ *//' -e 's/$$/:/' >> $(basename $@).d
@rm -f $(basename $@).d.tmp
$(X2AP_GENERATED): %.o : %.c
@echo "Compiling $<"
@echo "Compiling $< with CFLAGS= $(CFLAGS)"
@if [ ! -d $(dir $@) ]; then mkdir -p $(dir $@); fi;
@$(CC) -c $(CFLAGS) -o $@ $<
@$(CC) -MM $(CFLAGS) $< > $(basename $@).d
@mv -f $(basename $@).d $(basename $@).d.tmp
@sed -e 's|.*:|$@:|' < $(basename $@).d.tmp > $(basename $@).d
@sed -e 's/.*://' -e 's/\\$$//' < $(basename $@).d.tmp | fmt -1 | \
sed -e 's/^ *//' -e 's/$$/:/' >> $(basename $@).d
@rm -f $(basename $@).d.tmp
$(OUTDIR)/x2ap_ieregen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/X2AP-PDU-Contents.asn $(ASN1DIR)/asn1tostruct.py
@if [ ! -d $(OUTDIR) ]; then mkdir -p $(OUTDIR); fi;
@python $(ASN1DIR)/asn1tostruct.py -f$< -o$(OUTDIR)
@echo Timestamp > $@
#ProtocolExtensionContainer
#$(ASN1DIR)/$(ASN1RELDIR)/X2AP-PDU.asn
$(OUTDIR)/x2ap_asn1regen.stamp: $(ASN1DIR)/$(ASN1RELDIR)/X2AP-CommonDataTypes.asn $(ASN1DIR)/$(ASN1RELDIR)/X2AP-Constants.asn $(ASN1DIR)/$(ASN1RELDIR)/X2AP-IEs.asn $(ASN1DIR)/$(ASN1RELDIR)/X2AP-PDU.asn
@echo "Timestamp DIR " $(ASN1DIR) " DIRREL " $(ASN1RELDIR)
# (cd $(ASN1DIR)/$(ASN1RELDIR) && asn1c -fhave_native64 -gen-PER -fcompound-names $^)
(cd $(ASN1MESSAGESDIR) && asn1c -fhave_native64 -gen-PER -fcompound-names -fskeletons-copy $^)
@echo "Timestamp X2AP_CFLAGS: " $(X2AP_CFLAGS)
@echo Timestamp > $@
$(OUTDIR)/libx2ap.a: $(OUTDIR)/x2ap_ieregen.stamp $(OUTDIR)/x2ap_asn1regen.stamp $(X2AP_GENERATED) $(addprefix $(OUTDIR)/,$(libx2ap_OBJECTS))
@echo Creating X2AP archive
@echo libx2ap_OBJECTS $(libx2ap_OBJECTS)
@$(AR) rcs $@ $(X2AP_GENERATED) $(addprefix $(OUTDIR)/,$(libx2ap_OBJECTS))
clean:
@$(RM_F_V) $(OUTDIR)/*.o
@$(RM_F_V) $(OUTDIR)/*.d
@$(RM_F_V) $(addprefix $(OUTDIR)/MESSAGES/ASN1/$(ASN1RELDIR), $(X2AP_ASN_MODULE_SOURCES))
@$(RM_F_V) $(addprefix $(OUTDIR)/MESSAGES/ASN1/$(ASN1RELDIR), $(X2AP_ASN_MODULE_SOURCES:.o=.d))
@$(RM_F_V) $(OUTDIR)/libx2ap.a
@$(RM_F_V) $(OUTDIR)/x2ap_asn1regen.stamp
@$(RM_F_V) $(OUTDIR)/x2ap_ieregen.stamp
@$(RM_F_V) $(OUTDIR)/x2ap_decoder.c $(OUTDIR)/x2ap_encoder.c
@$(RM_F_V) $(OUTDIR)/x2ap_xer_print.c $(OUTDIR)/x2ap_ies_defs.h
cleanall: clean
@$(RM_F_V) $(addprefix $(OUTDIR)/MESSAGES/ASN1/$(ASN1RELDIR), $(X2AP_ASN_MODULE_SOURCES:.o=.c))
@$(RM_F_V) $(addprefix $(OUTDIR)/MESSAGES/ASN1/$(ASN1RELDIR), $(X2AP_ASN_MODULE_SOURCES:.o=.h))
showcflags:
@echo x2ap cflags: $(CFLAGS)
/*
* Copyright (c) 2015, EURECOM (www.eurecom.fr)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation are those
* of the authors and should not be interpreted as representing official policies,
* either expressed or implied, of the FreeBSD Project.
*/
/*****************************************************************************
Source as_message.h
Version 0.1
Date 2012/10/18
Product NAS stack
Subsystem Application Programming Interface
Author Frederic Maurel
Description Defines the messages supported by the Access Stratum sublayer
protocol (usually RRC and S1AP for E-UTRAN) and functions used
to encode and decode
*****************************************************************************/
#ifndef __AS_MESSAGE_H__
#define __AS_MESSAGE_H__
#include "commonDef.h"
#include "networkDef.h"
/****************************************************************************/
/********************* G L O B A L C O N S T A N T S *******************/
/****************************************************************************/
/*
* --------------------------------------------------------------------------
* Access Stratum message types
* --------------------------------------------------------------------------
*/
#define AS_REQUEST 0x0100
#define AS_RESPONSE 0x0200
#define AS_INDICATION 0x0400
#define AS_CONFIRM 0x0800
/*
* --------------------------------------------------------------------------
* Access Stratum message identifiers
* --------------------------------------------------------------------------
*/
/* Broadcast information */
#define AS_BROADCAST_INFO 0x01
#define AS_BROADCAST_INFO_IND (AS_BROADCAST_INFO | AS_INDICATION)
/* Cell information relevant for cell selection processing */
#define AS_CELL_INFO 0x02
#define AS_CELL_INFO_REQ (AS_CELL_INFO | AS_REQUEST)
#define AS_CELL_INFO_CNF (AS_CELL_INFO | AS_CONFIRM)
#define AS_CELL_INFO_IND (AS_CELL_INFO | AS_INDICATION)
/* Paging information */
#define AS_PAGING 0x03
#define AS_PAGING_REQ (AS_PAGING | AS_REQUEST)
#define AS_PAGING_IND (AS_PAGING | AS_INDICATION)
/* NAS signalling connection establishment */
#define AS_NAS_ESTABLISH 0x04
#define AS_NAS_ESTABLISH_REQ (AS_NAS_ESTABLISH | AS_REQUEST)
#define AS_NAS_ESTABLISH_IND (AS_NAS_ESTABLISH | AS_INDICATION)
#define AS_NAS_ESTABLISH_RSP (AS_NAS_ESTABLISH | AS_RESPONSE)
#define AS_NAS_ESTABLISH_CNF (AS_NAS_ESTABLISH | AS_CONFIRM)
/* NAS signalling connection release */
#define AS_NAS_RELEASE 0x05
#define AS_NAS_RELEASE_REQ (AS_NAS_RELEASE | AS_REQUEST)
#define AS_NAS_RELEASE_IND (AS_NAS_RELEASE | AS_INDICATION)
/* Uplink information transfer */
#define AS_UL_INFO_TRANSFER 0x06
#define AS_UL_INFO_TRANSFER_REQ (AS_UL_INFO_TRANSFER | AS_REQUEST)
#define AS_UL_INFO_TRANSFER_CNF (AS_UL_INFO_TRANSFER | AS_CONFIRM)
#define AS_UL_INFO_TRANSFER_IND (AS_UL_INFO_TRANSFER | AS_INDICATION)
/* Downlink information transfer */
#define AS_DL_INFO_TRANSFER 0x07
#define AS_DL_INFO_TRANSFER_REQ (AS_DL_INFO_TRANSFER | AS_REQUEST)
#define AS_DL_INFO_TRANSFER_CNF (AS_DL_INFO_TRANSFER | AS_CONFIRM)
#define AS_DL_INFO_TRANSFER_IND (AS_DL_INFO_TRANSFER | AS_INDICATION)
/* Radio Access Bearer establishment */
#define AS_RAB_ESTABLISH 0x08
#define AS_RAB_ESTABLISH_REQ (AS_RAB_ESTABLISH | AS_REQUEST)
#define AS_RAB_ESTABLISH_IND (AS_RAB_ESTABLISH | AS_INDICATION)
#define AS_RAB_ESTABLISH_RSP (AS_RAB_ESTABLISH | AS_RESPONSE)
#define AS_RAB_ESTABLISH_CNF (AS_RAB_ESTABLISH | AS_CONFIRM)
/* Radio Access Bearer release */
#define AS_RAB_RELEASE 0x09
#define AS_RAB_RELEASE_REQ (AS_RAB_RELEASE | AS_REQUEST)
#define AS_RAB_RELEASE_IND (AS_RAB_RELEASE | AS_INDICATION)
/* NAS Cause */
#define EPS_SERVICES_AND_NON_EPS_SERVICES_NOT_ALLOWED (8)
#define EPS_SERVICES_NOT_ALLOWED (7)
#define PLMN_NOT_ALLOWED (11)
#define TRACKING_AREA_NOT_ALLOWED (12)
#define ROAMING_NOT_ALLOWED_IN_THIS_TRACKING_AREA (13)
#define EPS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN (14)
#define NO_SUITABLE_CELLS_IN_TRACKING_AREA (15)
#define NETWORK_FAILURE (17)
#define ESM_FAILURE (19)
typedef enum nas_cause_s {
NAS_CAUSE_EPS_SERVICES_AND_NON_EPS_SERVICES_NOT_ALLOWED = EPS_SERVICES_AND_NON_EPS_SERVICES_NOT_ALLOWED,
NAS_CAUSE_EPS_SERVICES_NOT_ALLOWED = EPS_SERVICES_NOT_ALLOWED,
NAS_CAUSE_PLMN_NOT_ALLOWED = PLMN_NOT_ALLOWED,
NAS_CAUSE_TRACKING_AREA_NOT_ALLOWED = TRACKING_AREA_NOT_ALLOWED,
NAS_CAUSE_ROAMING_NOT_ALLOWED_IN_THIS_TRACKING_AREA = ROAMING_NOT_ALLOWED_IN_THIS_TRACKING_AREA,
NAS_CAUSE_EPS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN = EPS_SERVICES_NOT_ALLOWED_IN_THIS_PLMN,
NAS_CAUSE_NO_SUITABLE_CELLS_IN_TRACKING_AREA = NO_SUITABLE_CELLS_IN_TRACKING_AREA,
NAS_CAUSE_NETWORK_FAILURE = NETWORK_FAILURE,
NAS_CAUSE_ESM_FAILURE = ESM_FAILURE
} nas_cause_t;
/*
* --------------------------------------------------------------------------
* Access Stratum message global parameters
* --------------------------------------------------------------------------
*/
/* Error code */
typedef enum nas_error_code_s {
AS_SUCCESS = 1, /* Success code, transaction is going on */
AS_TERMINATED_NAS, /* Transaction terminated by NAS */
AS_TERMINATED_AS, /* Transaction terminated by AS */
AS_FAILURE /* Failure code */
} nas_error_code_t;
/* Core network domain */
typedef enum core_network_s {
AS_PS = 1, /* Packet-Switched */
AS_CS /* Circuit-Switched */
} core_network_t;
/* SAE Temporary Mobile Subscriber Identity */
typedef struct as_stmsi_s {
uint8_t MMEcode; /* MME code that allocated the GUTI */
uint32_t m_tmsi; /* M-Temporary Mobile Subscriber Identity */
} as_stmsi_t;
/* Dedicated NAS information */
typedef struct as_nas_info_s {
uint32_t length; /* Length of the NAS information data */
Byte_t* data; /* Dedicated NAS information data container */
} as_nas_info_t;
/* Radio Access Bearer identity */
typedef uint8_t as_rab_id_t;
/****************************************************************************/
/************************ G L O B A L T Y P E S ************************/
/****************************************************************************/
/*
* --------------------------------------------------------------------------
* Broadcast information
* --------------------------------------------------------------------------
*/
/*
* AS->NAS - Broadcast information indication
* AS may asynchronously report to NAS available PLMNs within specific
* location area
*/
typedef struct broadcast_info_ind_s {
#define PLMN_LIST_MAX_SIZE 6
PLMN_LIST_T(PLMN_LIST_MAX_SIZE) plmnIDs; /* List of PLMN identifiers */
ci_t cellID; /* Identity of the cell serving the listed PLMNs */
tac_t tac; /* Code of the tracking area the cell belongs to */
} broadcast_info_ind_t;
/*
* --------------------------------------------------------------------------
* Cell information relevant for cell selection processing
* --------------------------------------------------------------------------
*/
/* Radio access technologies supported by the network */
#define AS_GSM (1 << NET_ACCESS_GSM)
#define AS_COMPACT (1 << NET_ACCESS_COMPACT)
#define AS_UTRAN (1 << NET_ACCESS_UTRAN)
#define AS_EGPRS (1 << NET_ACCESS_EGPRS)
#define AS_HSDPA (1 << NET_ACCESS_HSDPA)
#define AS_HSUPA (1 << NET_ACCESS_HSUPA)
#define AS_HSDUPA (1 << NET_ACCESS_HSDUPA)
#define AS_EUTRAN (1 << NET_ACCESS_EUTRAN)
/*
* NAS->AS - Cell Information request
* NAS request AS to search for a suitable cell belonging to the selected
* PLMN to camp on.
*/
typedef struct cell_info_req_s {
plmn_t plmnID; /* Selected PLMN identity */
Byte_t rat; /* Bitmap - set of radio access technologies */
} cell_info_req_t;
/*
* AS->NAS - Cell Information confirm
* AS search for a suitable cell and respond to NAS. If found, the cell
* is selected to camp on.
*/
typedef struct cell_info_cnf_s {
uint8_t errCode; /* Error code */
ci_t cellID; /* Identity of the cell serving the selected PLMN */
tac_t tac; /* Code of the tracking area the cell belongs to */
AcT_t rat; /* Radio access technology supported by the cell */
uint8_t rsrq; /* Reference signal received quality */
uint8_t rsrp; /* Reference signal received power */
} cell_info_cnf_t;
/*
* AS->NAS - Cell Information indication
* AS may change cell selection if a more suitable cell is found.
*/
typedef struct cell_info_ind_s {
ci_t cellID; /* Identity of the new serving cell */
tac_t tac; /* Code of the tracking area the cell belongs to */
} cell_info_ind_t;
/*
* --------------------------------------------------------------------------
* Paging information
* --------------------------------------------------------------------------
*/
/* Paging cause */
typedef enum paging_cause_s {
AS_CONNECTION_ESTABLISH, /* Establish NAS signalling connection */
AS_EPS_ATTACH, /* Perform local detach and initiate EPS
* attach procedure */
AS_CS_FALLBACK /* Inititate CS fallback procedure */
} paging_cause_t;
/*
* NAS->AS - Paging Information request
* NAS requests the AS that NAS signalling messages or user data is pending
* to be sent.
*/
typedef struct paging_req_s {
as_stmsi_t s_tmsi; /* UE identity */
uint8_t CN_domain; /* Core network domain */
} paging_req_t;
/*
* AS->NAS - Paging Information indication
* AS reports to the NAS that appropriate procedure has to be initiated.
*/
typedef struct paging_ind_s {
paging_cause_t cause; /* Paging cause */
} paging_ind_t;
/*
* --------------------------------------------------------------------------
* NAS signalling connection establishment
* --------------------------------------------------------------------------
*/
/* Cause of RRC connection establishment */
typedef enum as_cause_s {
AS_CAUSE_UNKNOWN = 0,
AS_CAUSE_EMERGENCY = NET_ESTABLISH_CAUSE_EMERGENCY,
AS_CAUSE_HIGH_PRIO = NET_ESTABLISH_CAUSE_HIGH_PRIO,
AS_CAUSE_MT_ACCESS = NET_ESTABLISH_CAUSE_MT_ACCESS,
AS_CAUSE_MO_SIGNAL = NET_ESTABLISH_CAUSE_MO_SIGNAL,
AS_CAUSE_MO_DATA = NET_ESTABLISH_CAUSE_MO_DATA,
AS_CAUSE_V1020 = NET_ESTABLISH_CAUSE_V1020
} as_cause_t;
/* Type of the call associated to the RRC connection establishment */
typedef enum as_call_type_s {
AS_TYPE_ORIGINATING_SIGNAL = NET_ESTABLISH_TYPE_ORIGINATING_SIGNAL,
AS_TYPE_EMERGENCY_CALLS = NET_ESTABLISH_TYPE_EMERGENCY_CALLS,
AS_TYPE_ORIGINATING_CALLS = NET_ESTABLISH_TYPE_ORIGINATING_CALLS,
AS_TYPE_TERMINATING_CALLS = NET_ESTABLISH_TYPE_TERMINATING_CALLS,
AS_TYPE_MO_CS_FALLBACK = NET_ESTABLISH_TYPE_MO_CS_FALLBACK
} as_call_type_t;
/*
* NAS->AS - NAS signalling connection establishment request
* NAS requests the AS to perform the RRC connection establishment procedure
* to transfer initial NAS message to the network while UE is in IDLE mode.
*/
typedef struct nas_establish_req_s {
as_cause_t cause; /* RRC connection establishment cause */
as_call_type_t type; /* RRC associated call type */
as_stmsi_t s_tmsi; /* UE identity */
plmn_t plmnID; /* Selected PLMN identity */
as_nas_info_t initialNasMsg; /* Initial NAS message to transfer */
} nas_establish_req_t;
/*
* AS->NAS - NAS signalling connection establishment indication
* AS transfers the initial NAS message to the NAS.
*/
typedef struct nas_establish_ind_s {
uint32_t UEid; /* UE lower layer identifier */
tac_t tac; /* Code of the tracking area the initiating
* UE belongs to */
as_cause_t asCause; /* Establishment cause */
as_nas_info_t initialNasMsg; /* Initial NAS message to transfer */
} nas_establish_ind_t;
/*
* NAS->AS - NAS signalling connection establishment response
* NAS responds to the AS that initial answer message has to be provided to
* the UE.
*/
typedef struct nas_establish_rsp_s {
uint32_t UEid; /* UE lower layer identifier */
as_stmsi_t s_tmsi; /* UE identity */
nas_error_code_t errCode; /* Transaction status */
as_nas_info_t nasMsg; /* NAS message to transfer */
uint32_t nas_ul_count; /* UL NAS COUNT */
uint16_t selected_encryption_algorithm;
uint16_t selected_integrity_algorithm;
} nas_establish_rsp_t;
/*
* AS->NAS - NAS signalling connection establishment confirm
* AS transfers the initial answer message to the NAS.
*/
typedef struct nas_establish_cnf_s {
uint32_t UEid; /* UE lower layer identifier */
nas_error_code_t errCode; /* Transaction status */
as_nas_info_t nasMsg; /* NAS message to transfer */
uint32_t ul_nas_count;
uint16_t selected_encryption_algorithm;
uint16_t selected_integrity_algorithm;
} nas_establish_cnf_t;
/*
* --------------------------------------------------------------------------
* NAS signalling connection release
* --------------------------------------------------------------------------
*/
/* Release cause */
typedef enum release_cause_s {
AS_AUTHENTICATION_FAILURE = 1, /* Authentication procedure failed */
AS_DETACH /* Detach requested */
} release_cause_t;
/*
* NAS->AS - NAS signalling connection release request
* NAS requests the termination of the connection with the UE.
*/
typedef struct nas_release_req_s {
uint32_t UEid; /* UE lower layer identifier */
as_stmsi_t s_tmsi; /* UE identity */
release_cause_t cause; /* Release cause */
} nas_release_req_t;
/*
* AS->NAS - NAS signalling connection release indication
* AS reports that connection has been terminated by the network.
*/
typedef struct nas_release_ind_s {
release_cause_t cause; /* Release cause */
} nas_release_ind_t;
/*
* --------------------------------------------------------------------------
* NAS information transfer
* --------------------------------------------------------------------------
*/
/*
* NAS->AS - Uplink data transfer request
* NAS requests the AS to transfer uplink information to the NAS that
* operates at the network side.
*/
typedef struct ul_info_transfer_req_s {
uint32_t UEid; /* UE lower layer identifier */
as_stmsi_t s_tmsi; /* UE identity */
as_nas_info_t nasMsg; /* Uplink NAS message */
} ul_info_transfer_req_t;
/*
* AS->NAS - Uplink data transfer confirm
* AS immediately notifies the NAS whether uplink information has been
* successfully sent to the network or not.
*/
typedef struct ul_info_transfer_cnf_s {
uint32_t UEid; /* UE lower layer identifier */
nas_error_code_t errCode; /* Transaction status */
} ul_info_transfer_cnf_t;
/*
* AS->NAS - Uplink data transfer indication
* AS delivers the uplink information message to the NAS that operates
* at the network side.
*/
typedef struct ul_info_transfer_ind_s {
uint32_t UEid; /* UE lower layer identifier */
as_nas_info_t nasMsg; /* Uplink NAS message */
} ul_info_transfer_ind_t;
/*
* NAS->AS - Downlink data transfer request
* NAS requests the AS to transfer downlink information to the NAS that
* operates at the UE side.
*/
typedef ul_info_transfer_req_t dl_info_transfer_req_t;
/*
* AS->NAS - Downlink data transfer confirm
* AS immediately notifies the NAS whether downlink information has been
* successfully sent to the network or not.
*/
typedef ul_info_transfer_cnf_t dl_info_transfer_cnf_t;
/*
* AS->NAS - Downlink data transfer indication
* AS delivers the downlink information message to the NAS that operates
* at the UE side.
*/
typedef ul_info_transfer_ind_t dl_info_transfer_ind_t;
/*
* --------------------------------------------------------------------------
* Radio Access Bearer establishment
* --------------------------------------------------------------------------
*/
/* TODO: Quality of Service parameters */
typedef struct {} as_qos_t;
/*
* NAS->AS - Radio access bearer establishment request
* NAS requests the AS to allocate transmission resources to radio access
* bearer initialized at the network side.
*/
typedef struct rab_establish_req_s {
as_stmsi_t s_tmsi; /* UE identity */
as_rab_id_t rabID; /* Radio access bearer identity */
as_qos_t QoS; /* Requested Quality of Service */
} rab_establish_req_t;
/*
* AS->NAS - Radio access bearer establishment indication
* AS notifies the NAS that specific radio access bearer has to be setup.
*/
typedef struct rab_establish_ind_s {
as_rab_id_t rabID; /* Radio access bearer identity */
} rab_establish_ind_t;
/*
* NAS->AS - Radio access bearer establishment response
* NAS responds to AS whether the specified radio access bearer has been
* successfully setup or not.
*/
typedef struct rab_establish_rsp_s {
as_stmsi_t s_tmsi; /* UE identity */
as_rab_id_t rabID; /* Radio access bearer identity */
nas_error_code_t errCode; /* Transaction status */
} rab_establish_rsp_t;
/*
* AS->NAS - Radio access bearer establishment confirm
* AS notifies NAS whether the specified radio access bearer has been
* successfully setup at the UE side or not.
*/
typedef struct rab_establish_cnf_s {
as_rab_id_t rabID; /* Radio access bearer identity */
nas_error_code_t errCode; /* Transaction status */
} rab_establish_cnf_t;
/*
* --------------------------------------------------------------------------
* Radio Access Bearer release
* --------------------------------------------------------------------------
*/
/*
* NAS->AS - Radio access bearer release request
* NAS requests the AS to release transmission resources previously allocated
* to specific radio access bearer at the network side.
*/
typedef struct rab_release_req_s {
as_stmsi_t s_tmsi; /* UE identity */
as_rab_id_t rabID; /* Radio access bearer identity */
} rab_release_req_t;
/*
* AS->NAS - Radio access bearer release indication
* AS notifies NAS that specific radio access bearer has been released.
*/
typedef struct rab_release_ind_s {
as_rab_id_t rabID; /* Radio access bearer identity */
} rab_release_ind_t;
/*
* --------------------------------------------------------------------------
* Structure of the AS messages handled by the network sublayer
* --------------------------------------------------------------------------
*/
typedef struct as_message_s {
uint16_t msgID;
union {
broadcast_info_ind_t broadcast_info_ind;
cell_info_req_t cell_info_req;
cell_info_cnf_t cell_info_cnf;
cell_info_ind_t cell_info_ind;
paging_req_t paging_req;
paging_ind_t paging_ind;
nas_establish_req_t nas_establish_req;
nas_establish_ind_t nas_establish_ind;
nas_establish_rsp_t nas_establish_rsp;
nas_establish_cnf_t nas_establish_cnf;
nas_release_req_t nas_release_req;
nas_release_ind_t nas_release_ind;
ul_info_transfer_req_t ul_info_transfer_req;
ul_info_transfer_cnf_t ul_info_transfer_cnf;
ul_info_transfer_ind_t ul_info_transfer_ind;
dl_info_transfer_req_t dl_info_transfer_req;
dl_info_transfer_cnf_t dl_info_transfer_cnf;
dl_info_transfer_ind_t dl_info_transfer_ind;
rab_establish_req_t rab_establish_req;
rab_establish_ind_t rab_establish_ind;
rab_establish_rsp_t rab_establish_rsp;
rab_establish_cnf_t rab_establish_cnf;
rab_release_req_t rab_release_req;
rab_release_ind_t rab_release_ind;
} __attribute__((__packed__)) msg;
} as_message_t;
/****************************************************************************/
/******************** G L O B A L V A R I A B L E S ********************/
/****************************************************************************/
/****************************************************************************/
/****************** E X P O R T E D F U N C T I O N S ******************/
/****************************************************************************/
int as_message_decode(const char* buffer, as_message_t* msg, int length);
int as_message_encode(char* buffer, as_message_t* msg, int length);
/* Implemented in the network_api.c body file */
int as_message_send(as_message_t* as_msg);
#endif /* __AS_MESSAGE_H__*/
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
MESSAGE_DEF(GTPV1U_CREATE_TUNNEL_REQ, MESSAGE_PRIORITY_MED, Gtpv1uCreateTunnelReq, gtpv1uCreateTunnelReq)
MESSAGE_DEF(GTPV1U_CREATE_TUNNEL_RESP, MESSAGE_PRIORITY_MED, Gtpv1uCreateTunnelResp, gtpv1uCreateTunnelResp)
MESSAGE_DEF(GTPV1U_UPDATE_TUNNEL_REQ, MESSAGE_PRIORITY_MED, Gtpv1uUpdateTunnelReq, gtpv1uUpdateTunnelReq)
MESSAGE_DEF(GTPV1U_UPDATE_TUNNEL_RESP, MESSAGE_PRIORITY_MED, Gtpv1uUpdateTunnelResp, gtpv1uUpdateTunnelResp)
MESSAGE_DEF(GTPV1U_DELETE_TUNNEL_REQ, MESSAGE_PRIORITY_MED, Gtpv1uDeleteTunnelReq, gtpv1uDeleteTunnelReq)
MESSAGE_DEF(GTPV1U_DELETE_TUNNEL_RESP, MESSAGE_PRIORITY_MED, Gtpv1uDeleteTunnelResp, gtpv1uDeleteTunnelResp)
MESSAGE_DEF(GTPV1U_TUNNEL_DATA_IND, MESSAGE_PRIORITY_MED, Gtpv1uTunnelDataInd, gtpv1uTunnelDataInd)
MESSAGE_DEF(GTPV1U_TUNNEL_DATA_REQ, MESSAGE_PRIORITY_MED, Gtpv1uTunnelDataReq, gtpv1uTunnelDataReq)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#ifndef GTPV1_U_MESSAGES_TYPES_H_
#define GTPV1_U_MESSAGES_TYPES_H_
#include "../SGW-LITE/sgw_lite_ie_defs.h"
typedef struct {
Teid_t context_teid; ///< Tunnel Endpoint Identifier
ebi_t eps_bearer_id;
} Gtpv1uCreateTunnelReq;
typedef struct {
uint8_t status; ///< Status of S1U endpoint creation (Failed = 0xFF or Success = 0x0)
Teid_t context_teid; ///< local SGW S11 Tunnel Endpoint Identifier
Teid_t S1u_teid; ///< Tunnel Endpoint Identifier
ebi_t eps_bearer_id;
} Gtpv1uCreateTunnelResp;
typedef struct {
Teid_t context_teid; ///< S11 Tunnel Endpoint Identifier
Teid_t sgw_S1u_teid; ///< SGW S1U local Tunnel Endpoint Identifier
Teid_t enb_S1u_teid; ///< eNB S1U Tunnel Endpoint Identifier
ip_address_t enb_ip_address_for_S1u;
ebi_t eps_bearer_id;
} Gtpv1uUpdateTunnelReq;
typedef struct {
uint8_t status; ///< Status (Failed = 0xFF or Success = 0x0)
Teid_t context_teid; ///< S11 Tunnel Endpoint Identifier
Teid_t sgw_S1u_teid; ///< SGW S1U local Tunnel Endpoint Identifier
Teid_t enb_S1u_teid; ///< eNB S1U Tunnel Endpoint Identifier
ebi_t eps_bearer_id;
} Gtpv1uUpdateTunnelResp;
typedef struct {
Teid_t context_teid; ///< local SGW S11 Tunnel Endpoint Identifier
Teid_t S1u_teid; ///< local S1U Tunnel Endpoint Identifier to be deleted
} Gtpv1uDeleteTunnelReq;
typedef struct {
uint8_t status; ///< Status of S1U endpoint deleteion (Failed = 0xFF or Success = 0x0)
Teid_t context_teid; ///< local SGW S11 Tunnel Endpoint Identifier
Teid_t S1u_teid; ///< local S1U Tunnel Endpoint Identifier to be deleted
} Gtpv1uDeleteTunnelResp;
typedef struct {
uint8_t *buffer;
uint32_t length;
uint32_t offset; ///< start of message offset in buffer
Teid_t local_S1u_teid; ///< Tunnel Endpoint Identifier
} Gtpv1uTunnelDataInd;
typedef struct {
uint8_t *buffer;
uint32_t length;
uint32_t offset; ///< start of message offset in buffer
Teid_t local_S1u_teid; ///< Tunnel Endpoint Identifier
Teid_t S1u_enb_teid; ///< Tunnel Endpoint Identifier
} Gtpv1uTunnelDataReq;
#endif /* GTPV1_U_MESSAGES_TYPES_H_ */
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
// These messages files are mandatory and must always be placed in first position
#include "intertask_messages_def.h"
#include "timer_messages_def.h"
// Messages files used between tasks
#include "gtpv1_u_messages_def.h"
#include "ip_forward_messages_def.h"
#include "nas_messages_def.h"
#include "s11_messages_def.h"
#include "s1ap_messages_def.h"
#include "s6a_messages_def.h"
#include "sctp_messages_def.h"
#include "sgw_lite_def.h"
#include "udp_messages_def.h"
#include "mme_app_messages_def.h"
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
//WARNING: Do not include this header directly. Use intertask_interface.h instead.
// Messages for NAS logging
MESSAGE_DEF(NAS_DL_EMM_RAW_MSG, MESSAGE_PRIORITY_MED, nas_raw_msg_t, nas_dl_emm_raw_msg)
MESSAGE_DEF(NAS_UL_EMM_RAW_MSG, MESSAGE_PRIORITY_MED, nas_raw_msg_t, nas_ul_emm_raw_msg)
MESSAGE_DEF(NAS_DL_EMM_PLAIN_MSG, MESSAGE_PRIORITY_MED, nas_emm_plain_msg_t, nas_dl_emm_plain_msg)
MESSAGE_DEF(NAS_UL_EMM_PLAIN_MSG, MESSAGE_PRIORITY_MED, nas_emm_plain_msg_t, nas_ul_emm_plain_msg)
MESSAGE_DEF(NAS_DL_EMM_PROTECTED_MSG, MESSAGE_PRIORITY_MED, nas_emm_protected_msg_t, nas_dl_emm_protected_msg)
MESSAGE_DEF(NAS_UL_EMM_PROTECTED_MSG, MESSAGE_PRIORITY_MED, nas_emm_protected_msg_t, nas_ul_emm_protected_msg)
MESSAGE_DEF(NAS_DL_ESM_RAW_MSG, MESSAGE_PRIORITY_MED, nas_raw_msg_t, nas_dl_esm_raw_msg)
MESSAGE_DEF(NAS_UL_ESM_RAW_MSG, MESSAGE_PRIORITY_MED, nas_raw_msg_t, nas_ul_esm_raw_msg)
MESSAGE_DEF(NAS_DL_ESM_PLAIN_MSG, MESSAGE_PRIORITY_MED, nas_esm_plain_msg_t, nas_dl_esm_plain_msg)
MESSAGE_DEF(NAS_UL_ESM_PLAIN_MSG, MESSAGE_PRIORITY_MED, nas_esm_plain_msg_t, nas_ul_esm_plain_msg)
MESSAGE_DEF(NAS_DL_ESM_PROTECTED_MSG, MESSAGE_PRIORITY_MED, nas_esm_protected_msg_t, nas_dl_esm_protected_msg)
MESSAGE_DEF(NAS_UL_ESM_PROTECTED_MSG, MESSAGE_PRIORITY_MED, nas_esm_protected_msg_t, nas_ul_esm_protected_msg)
/* */
MESSAGE_DEF(NAS_PAGING_IND, MESSAGE_PRIORITY_MED, nas_paging_ind_t, nas_paging_ind)
MESSAGE_DEF(NAS_PDN_CONNECTIVITY_REQ, MESSAGE_PRIORITY_MED, nas_pdn_connectivity_req_t, nas_pdn_connectivity_req)
MESSAGE_DEF(NAS_CONNECTION_ESTABLISHMENT_IND, MESSAGE_PRIORITY_MED, nas_conn_est_ind_t, nas_conn_est_ind)
MESSAGE_DEF(NAS_CONNECTION_ESTABLISHMENT_CNF, MESSAGE_PRIORITY_MED, nas_conn_est_cnf_t, nas_conn_est_cnf)
MESSAGE_DEF(NAS_CONNECTION_RELEASE_IND, MESSAGE_PRIORITY_MED, nas_conn_rel_ind_t, nas_conn_rel_ind)
MESSAGE_DEF(NAS_UPLINK_DATA_IND, MESSAGE_PRIORITY_MED, nas_ul_data_ind_t, nas_ul_data_ind)
MESSAGE_DEF(NAS_DOWNLINK_DATA_REQ, MESSAGE_PRIORITY_MED, nas_dl_data_req_t, nas_dl_data_req)
MESSAGE_DEF(NAS_DOWNLINK_DATA_CNF, MESSAGE_PRIORITY_MED, nas_dl_data_cnf_t, nas_dl_data_cnf)
MESSAGE_DEF(NAS_DOWNLINK_DATA_REJ, MESSAGE_PRIORITY_MED, nas_dl_data_rej_t, nas_dl_data_rej)
MESSAGE_DEF(NAS_RAB_ESTABLISHMENT_REQ, MESSAGE_PRIORITY_MED, nas_rab_est_req_t, nas_rab_est_req)
MESSAGE_DEF(NAS_RAB_ESTABLISHMENT_RESP, MESSAGE_PRIORITY_MED, nas_rab_est_rsp_t, nas_rab_est_rsp)
MESSAGE_DEF(NAS_RAB_RELEASE_REQ, MESSAGE_PRIORITY_MED, nas_rab_rel_req_t, nas_rab_rel_req)
/* NAS layer -> MME app messages */
MESSAGE_DEF(NAS_AUTHENTICATION_PARAM_REQ, MESSAGE_PRIORITY_MED, nas_auth_param_req_t, nas_auth_param_req)
/* MME app -> NAS layer messages */
MESSAGE_DEF(NAS_PDN_CONNECTIVITY_RSP, MESSAGE_PRIORITY_MED, nas_pdn_connectivity_rsp_t, nas_pdn_connectivity_rsp)
MESSAGE_DEF(NAS_PDN_CONNECTIVITY_FAIL, MESSAGE_PRIORITY_MED, nas_pdn_connectivity_fail_t, nas_pdn_connectivity_fail)
MESSAGE_DEF(NAS_AUTHENTICATION_PARAM_RSP, MESSAGE_PRIORITY_MED, nas_auth_param_rsp_t, nas_auth_param_rsp)
MESSAGE_DEF(NAS_AUTHENTICATION_PARAM_FAIL, MESSAGE_PRIORITY_MED, nas_auth_param_fail_t, nas_auth_param_fail)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include "as_message.h"
#include "nas_message.h"
#ifndef NAS_MESSAGES_TYPES_H_
#define NAS_MESSAGES_TYPES_H_
#define NAS_DL_EMM_RAW_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_emm_raw_msg
#define NAS_UL_EMM_RAW_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_emm_raw_msg
#define NAS_DL_EMM_PROTECTED_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_emm_protected_msg
#define NAS_UL_EMM_PROTECTED_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_emm_protected_msg
#define NAS_DL_EMM_PLAIN_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_emm_plain_msg
#define NAS_UL_EMM_PLAIN_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_emm_plain_msg
#define NAS_DL_ESM_RAW_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_esm_raw_msg
#define NAS_UL_ESM_RAW_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_esm_raw_msg
#define NAS_DL_ESM_PROTECTED_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_esm_protected_msg
#define NAS_UL_ESM_PROTECTED_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_esm_protected_msg
#define NAS_DL_ESM_PLAIN_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_esm_plain_msg
#define NAS_UL_ESM_PLAIN_MSG(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_esm_plain_msg
#define NAS_UL_DATA_IND(mSGpTR) (mSGpTR)->ittiMsg.nas_ul_data_ind
#define NAS_DL_DATA_REQ(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_data_req
#define NAS_DL_DATA_CNF(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_data_cnf
#define NAS_DL_DATA_REJ(mSGpTR) (mSGpTR)->ittiMsg.nas_dl_data_rej
#define NAS_PDN_CONNECTIVITY_REQ(mSGpTR) (mSGpTR)->ittiMsg.nas_pdn_connectivity_req
#define NAS_PDN_CONNECTIVITY_RSP(mSGpTR) (mSGpTR)->ittiMsg.nas_pdn_connectivity_rsp
#define NAS_PDN_CONNECTIVITY_FAIL(mSGpTR) (mSGpTR)->ittiMsg.nas_pdn_connectivity_fail
#define NAS_CONN_EST_IND(mSGpTR) (mSGpTR)->ittiMsg.nas_conn_est_ind
#define NAS_CONNECTION_ESTABLISHMENT_CNF(mSGpTR) (mSGpTR)->ittiMsg.nas_conn_est_cnf
#define NAS_BEARER_PARAM(mSGpTR) (mSGpTR)->ittiMsg.nas_bearer_param
#define NAS_AUTHENTICATION_REQ(mSGpTR) (mSGpTR)->ittiMsg.nas_auth_req
#define NAS_AUTHENTICATION_PARAM_REQ(mSGpTR) (mSGpTR)->ittiMsg.nas_auth_param_req
#define NAS_AUTHENTICATION_PARAM_RSP(mSGpTR) (mSGpTR)->ittiMsg.nas_auth_param_rsp
#define NAS_AUTHENTICATION_PARAM_FAIL(mSGpTR) (mSGpTR)->ittiMsg.nas_auth_param_fail
#define NAS_DATA_LENGHT_MAX 256
typedef enum {
EMM_MSG_HEADER = 1,
EMM_MSG_ATTACH_REQUEST,
EMM_MSG_ATTACH_ACCEPT,
EMM_MSG_ATTACH_COMPLETE,
EMM_MSG_ATTACH_REJECT,
EMM_MSG_DETACH_REQUEST,
EMM_MSG_DETACH_ACCEPT,
EMM_MSG_TRACKING_AREA_UPDATE_REQUEST,
EMM_MSG_TRACKING_AREA_UPDATE_ACCEPT,
EMM_MSG_TRACKING_AREA_UPDATE_COMPLETE,
EMM_MSG_TRACKING_AREA_UPDATE_REJECT,
EMM_MSG_EXTENDED_SERVICE_REQUEST,
EMM_MSG_SERVICE_REQUEST,
EMM_MSG_SERVICE_REJECT,
EMM_MSG_GUTI_REALLOCATION_COMMAND,
EMM_MSG_GUTI_REALLOCATION_COMPLETE,
EMM_MSG_AUTHENTICATION_REQUEST,
EMM_MSG_AUTHENTICATION_RESPONSE,
EMM_MSG_AUTHENTICATION_REJECT,
EMM_MSG_AUTHENTICATION_FAILURE,
EMM_MSG_IDENTITY_REQUEST,
EMM_MSG_IDENTITY_RESPONSE,
EMM_MSG_SECURITY_MODE_COMMAND,
EMM_MSG_SECURITY_MODE_COMPLETE,
EMM_MSG_SECURITY_MODE_REJECT,
EMM_MSG_EMM_STATUS,
EMM_MSG_EMM_INFORMATION,
EMM_MSG_DOWNLINK_NAS_TRANSPORT,
EMM_MSG_UPLINK_NAS_TRANSPORT,
EMM_MSG_CS_SERVICE_NOTIFICATION,
} emm_message_ids_t;
typedef enum {
ESM_MSG_HEADER = 1,
ESM_MSG_ACTIVATE_DEFAULT_EPS_BEARER_CONTEXT_REQUEST,
ESM_MSG_ACTIVATE_DEFAULT_EPS_BEARER_CONTEXT_ACCEPT,
ESM_MSG_ACTIVATE_DEFAULT_EPS_BEARER_CONTEXT_REJECT,
ESM_MSG_ACTIVATE_DEDICATED_EPS_BEARER_CONTEXT_REQUEST,
ESM_MSG_ACTIVATE_DEDICATED_EPS_BEARER_CONTEXT_ACCEPT,
ESM_MSG_ACTIVATE_DEDICATED_EPS_BEARER_CONTEXT_REJECT,
ESM_MSG_MODIFY_EPS_BEARER_CONTEXT_REQUEST,
ESM_MSG_MODIFY_EPS_BEARER_CONTEXT_ACCEPT,
ESM_MSG_MODIFY_EPS_BEARER_CONTEXT_REJECT,
ESM_MSG_DEACTIVATE_EPS_BEARER_CONTEXT_REQUEST,
ESM_MSG_DEACTIVATE_EPS_BEARER_CONTEXT_ACCEPT,
ESM_MSG_PDN_CONNECTIVITY_REQUEST,
ESM_MSG_PDN_CONNECTIVITY_REJECT,
ESM_MSG_PDN_DISCONNECT_REQUEST,
ESM_MSG_PDN_DISCONNECT_REJECT,
ESM_MSG_BEARER_RESOURCE_ALLOCATION_REQUEST,
ESM_MSG_BEARER_RESOURCE_ALLOCATION_REJECT,
ESM_MSG_BEARER_RESOURCE_MODIFICATION_REQUEST,
ESM_MSG_BEARER_RESOURCE_MODIFICATION_REJECT,
ESM_MSG_ESM_INFORMATION_REQUEST,
ESM_MSG_ESM_INFORMATION_RESPONSE,
ESM_MSG_ESM_STATUS,
} esm_message_ids_t;
typedef struct nas_raw_msg_s {
uint32_t lenght;
uint8_t data[NAS_DATA_LENGHT_MAX];
} nas_raw_msg_t;
typedef struct nas_emm_plain_msg_s {
emm_message_ids_t present;
EMM_msg choice;
} nas_emm_plain_msg_t;
typedef struct nas_emm_protected_msg_s {
nas_message_security_header_t header;
emm_message_ids_t present;
EMM_msg choice;
} nas_emm_protected_msg_t;
typedef struct nas_esm_plain_msg_s {
esm_message_ids_t present;
ESM_msg choice;
} nas_esm_plain_msg_t;
typedef struct nas_esm_protected_msg_s {
nas_message_security_header_t header;
esm_message_ids_t present;
ESM_msg choice;
} nas_esm_protected_msg_t;
typedef struct nas_paging_ind_s {
} nas_paging_ind_t;
typedef struct nas_pdn_connectivity_req_s {
int pti; // nas ref Identity of the procedure transaction executed to activate the PDN connection entry
unsigned ue_id; // nas ref
char imsi[16];
uint8_t imsi_length;
network_qos_t qos;
pco_flat_t pco;
OctetString apn;
OctetString pdn_addr;
int pdn_type;
void *proc_data;
int request_type;
} nas_pdn_connectivity_req_t;
typedef struct nas_pdn_connectivity_rsp_s {
int pti; // nas ref Identity of the procedure transaction executed to activate the PDN connection entry
unsigned ue_id; // nas ref
network_qos_t qos;
pco_flat_t pco;
OctetString apn;
OctetString pdn_addr;
int pdn_type;
void *proc_data;
int request_type;
unsigned eNB_ue_s1ap_id:24;
uint32_t mme_ue_s1ap_id;
/* Key eNB */
//uint8_t keNB[32];
ambr_t ambr;
ambr_t apn_ambr;
/* EPS bearer ID */
unsigned ebi:4;
/* QoS */
qci_t qci;
priority_level_t prio_level;
pre_emp_vulnerability_t pre_emp_vulnerability;
pre_emp_capability_t pre_emp_capability;
/* S-GW TEID for user-plane */
Teid_t sgw_s1u_teid;
/* S-GW IP address for User-Plane */
ip_address_t sgw_s1u_address;
} nas_pdn_connectivity_rsp_t;
typedef struct nas_pdn_connectivity_fail_s {
unsigned ue_id; // nas ref
} nas_pdn_connectivity_fail_t;
typedef struct nas_conn_est_ind_s {
nas_establish_ind_t nas;
/* Transparent message from s1ap to be forwarded to MME_APP or
* to S1AP if connection establishment is rejected by NAS.
*/
s1ap_initial_ue_message_t transparent;
} nas_conn_est_ind_t;
typedef nas_establish_rsp_t nas_conn_est_rej_t;
typedef nas_establish_cnf_t nas_conn_est_cnf_t;
typedef struct nas_conn_rel_ind_s {
} nas_conn_rel_ind_t;
typedef ul_info_transfer_ind_t nas_ul_data_ind_t;
typedef dl_info_transfer_req_t nas_dl_data_req_t;
typedef dl_info_transfer_cnf_t nas_dl_data_cnf_t;
typedef struct nas_dl_data_rej_s {
uint32_t UEid; /* UE lower layer identifier */
as_nas_info_t nasMsg; /* Uplink NAS message */
} nas_dl_data_rej_t;
typedef struct nas_rab_est_req_s {
} nas_rab_est_req_t;
typedef struct nas_rab_est_rsp_s {
} nas_rab_est_rsp_t;
typedef struct nas_rab_rel_req_s {
} nas_rab_rel_req_t;
typedef struct nas_attach_req_s {
/* TODO: Set the correct size */
char apn[100];
char imsi[16];
#define INITIAL_REQUEST (0x1)
unsigned initial:1;
s1ap_initial_ue_message_t transparent;
} nas_attach_req_t;
typedef struct nas_auth_req_s {
/* UE imsi */
char imsi[16];
#define NAS_FAILURE_OK 0x0
#define NAS_FAILURE_IND 0x1
unsigned failure:1;
int cause;
} nas_auth_req_t;
typedef struct nas_auth_resp_s {
char imsi[16];
} nas_auth_resp_t;
typedef struct nas_auth_param_req_s {
/* UE identifier */
uint32_t ue_id;
/* Imsi of the UE (In case of initial request) */
char imsi[16];
uint8_t imsi_length;
/* Indicates whether the procedure corresponds to a new connection or not */
uint8_t initial_req:1;
uint8_t re_synchronization:1;
uint8_t auts[14];
} nas_auth_param_req_t;
typedef struct nas_auth_param_rsp_s {
/* UE identifier */
uint32_t ue_id;
/* For future use: nb of vectors provided */
uint8_t nb_vectors;
/* Consider only one E-UTRAN vector for the moment... */
eutran_vector_t vector;
} nas_auth_param_rsp_t;
typedef struct nas_auth_param_fail_s {
/* UE identifier */
uint32_t ue_id;
/* S6A mapped to NAS cause */
nas_cause_t cause;
} nas_auth_param_fail_t;
#endif /* NAS_MESSAGES_TYPES_H_ */
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
//WARNING: Do not include this header directly. Use intertask_interface.h instead.
/* Messages for S1AP logging */
MESSAGE_DEF(S1AP_UPLINK_NAS_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_uplink_nas_log)
MESSAGE_DEF(S1AP_UE_CAPABILITY_IND_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_ue_capability_ind_log)
MESSAGE_DEF(S1AP_INITIAL_CONTEXT_SETUP_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_initial_context_setup_log)
MESSAGE_DEF(S1AP_NAS_NON_DELIVERY_IND_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_nas_non_delivery_ind_log)
MESSAGE_DEF(S1AP_DOWNLINK_NAS_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_downlink_nas_log)
MESSAGE_DEF(S1AP_S1_SETUP_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_s1_setup_log)
MESSAGE_DEF(S1AP_INITIAL_UE_MESSAGE_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_initial_ue_message_log)
MESSAGE_DEF(S1AP_UE_CONTEXT_RELEASE_REQ_LOG, MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_ue_context_release_req_log)
MESSAGE_DEF(S1AP_UE_CONTEXT_RELEASE_COMMAND_LOG, MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_ue_context_release_command_log)
MESSAGE_DEF(S1AP_UE_CONTEXT_RELEASE_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_ue_context_release_log)
MESSAGE_DEF(S1AP_ERROR_INDICATION_LOG , MESSAGE_PRIORITY_MED, IttiMsgText , s1ap_error_indication_log)
MESSAGE_DEF(S1AP_UE_CAPABILITIES_IND , MESSAGE_PRIORITY_MED, s1ap_ue_cap_ind_t , s1ap_ue_cap_ind)
MESSAGE_DEF(S1AP_ENB_DEREGISTERED_IND , MESSAGE_PRIORITY_MED, s1ap_eNB_deregistered_ind_t , s1ap_eNB_deregistered_ind)
MESSAGE_DEF(S1AP_DEREGISTER_UE_REQ , MESSAGE_PRIORITY_MED, s1ap_deregister_ue_req_t , s1ap_deregister_ue_req)
MESSAGE_DEF(S1AP_UE_CONTEXT_RELEASE_REQ , MESSAGE_PRIORITY_MED, s1ap_ue_context_release_req_t , s1ap_ue_context_release_req)
MESSAGE_DEF(S1AP_UE_CONTEXT_RELEASE_COMMAND, MESSAGE_PRIORITY_MED, s1ap_ue_context_release_command_t, s1ap_ue_context_release_command)
MESSAGE_DEF(S1AP_UE_CONTEXT_RELEASE_COMPLETE, MESSAGE_PRIORITY_MED, s1ap_ue_context_release_complete_t, s1ap_ue_context_release_complete)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#ifndef S1AP_MESSAGES_TYPES_H_
#define S1AP_MESSAGES_TYPES_H_
#define S1AP_ENB_DEREGISTERED_IND(mSGpTR) (mSGpTR)->ittiMsg.s1ap_eNB_deregistered_ind
#define S1AP_DEREGISTER_UE_REQ(mSGpTR) (mSGpTR)->ittiMsg.s1ap_deregister_ue_req
#define S1AP_UE_CONTEXT_RELEASE_REQ(mSGpTR) (mSGpTR)->ittiMsg.s1ap_ue_context_release_req
#define S1AP_UE_CONTEXT_RELEASE_COMMAND(mSGpTR) (mSGpTR)->ittiMsg.s1ap_ue_context_release_command
#define S1AP_UE_CONTEXT_RELEASE_COMPLETE(mSGpTR) (mSGpTR)->ittiMsg.s1ap_ue_context_release_complete
typedef struct s1ap_initial_ue_message_s {
unsigned eNB_ue_s1ap_id:24;
uint32_t mme_ue_s1ap_id;
cgi_t e_utran_cgi;
} s1ap_initial_ue_message_t;
typedef struct s1ap_initial_ctxt_setup_req_s {
unsigned eNB_ue_s1ap_id:24;
uint32_t mme_ue_s1ap_id;
/* Key eNB */
uint8_t keNB[32];
ambr_t ambr;
ambr_t apn_ambr;
/* EPS bearer ID */
unsigned ebi:4;
/* QoS */
qci_t qci;
priority_level_t prio_level;
pre_emp_vulnerability_t pre_emp_vulnerability;
pre_emp_capability_t pre_emp_capability;
/* S-GW TEID for user-plane */
Teid_t teid;
/* S-GW IP address for User-Plane */
ip_address_t s_gw_address;
} s1ap_initial_ctxt_setup_req_t;
typedef struct s1ap_ue_cap_ind_s {
unsigned eNB_ue_s1ap_id:24;
uint32_t mme_ue_s1ap_id;
uint8_t radio_capabilities[100];
uint32_t radio_capabilities_length;
} s1ap_ue_cap_ind_t;
#define S1AP_ITTI_UE_PER_DEREGISTER_MESSAGE 20
typedef struct s1ap_eNB_deregistered_ind_s {
uint8_t nb_ue_to_deregister;
uint32_t mme_ue_s1ap_id[S1AP_ITTI_UE_PER_DEREGISTER_MESSAGE];
} s1ap_eNB_deregistered_ind_t;
typedef struct s1ap_deregister_ue_req_s {
uint32_t mme_ue_s1ap_id;
} s1ap_deregister_ue_req_t;
typedef struct s1ap_ue_context_release_req_s {
uint32_t mme_ue_s1ap_id;
} s1ap_ue_context_release_req_t;
typedef struct s1ap_ue_context_release_command_s {
uint32_t mme_ue_s1ap_id;
} s1ap_ue_context_release_command_t;
typedef struct s1ap_ue_context_release_complete_s {
uint32_t mme_ue_s1ap_id;
} s1ap_ue_context_release_complete_t;
#endif /* S1AP_MESSAGES_TYPES_H_ */
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
//WARNING: Do not include this header directly. Use intertask_interface.h instead.
MESSAGE_DEF(SCTP_INIT_MSG, MESSAGE_PRIORITY_MED, SctpInit, sctpInit)
MESSAGE_DEF(SCTP_DATA_REQ, MESSAGE_PRIORITY_MED, sctp_data_req_t, sctp_data_req)
MESSAGE_DEF(SCTP_DATA_IND, MESSAGE_PRIORITY_MED, sctp_data_ind_t, sctp_data_ind)
MESSAGE_DEF(SCTP_NEW_ASSOCIATION, MESSAGE_PRIORITY_MAX, sctp_new_peer_t, sctp_new_peer)
MESSAGE_DEF(SCTP_CLOSE_ASSOCIATION, MESSAGE_PRIORITY_MAX, sctp_close_association_t, sctp_close_association)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#ifndef SCTP_MESSAGES_TYPES_H_
#define SCTP_MESSAGES_TYPES_H_
#define SCTP_DATA_IND(mSGpTR) (mSGpTR)->ittiMsg.sctp_data_ind
#define SCTP_DATA_REQ(mSGpTR) (mSGpTR)->ittiMsg.sctp_data_req
#define SCTP_INIT_MSG(mSGpTR) (mSGpTR)->ittiMsg.sctpInit
#define SCTP_CLOSE_ASSOCIATION(mSGpTR) (mSGpTR)->ittiMsg.sctp_close_association
typedef struct sctp_data_req_s {
uint8_t *buffer;
uint32_t bufLen;
uint32_t assocId;
uint16_t stream;
} sctp_data_req_t;
typedef struct sctp_data_ind_s {
uint8_t *buffer; ///< SCTP buffer
uint32_t buf_length; ///< SCTP buffer length
int32_t assoc_id; ///< SCTP physical association ID
uint8_t stream; ///< Stream number on which data had been received
uint16_t instreams; ///< Number of input streams for the SCTP connection between peers
uint16_t outstreams; ///< Number of output streams for the SCTP connection between peers
} sctp_data_ind_t;
typedef struct sctp_init_s {
/* Request usage of ipv4 */
unsigned ipv4:1;
/* Request usage of ipv6 */
unsigned ipv6:1;
uint8_t nb_ipv4_addr;
uint32_t ipv4_address[10];
uint8_t nb_ipv6_addr;
char *ipv6_address[10];
uint16_t port;
uint32_t ppid;
} SctpInit;
typedef struct sctp_close_association_s {
uint32_t assoc_id;
} sctp_close_association_t;
typedef struct sctp_new_peer_s {
uint32_t instreams;
uint32_t outstreams;
uint32_t assoc_id;
} sctp_new_peer_t;
#endif /* SCTP_MESSAGES_TYPES_H_ */
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
// This task is mandatory and must always be placed in first position
TASK_DEF(TASK_TIMER, TASK_PRIORITY_MED, 10)
// Other possible tasks in the process
/// GTPV1-U task
TASK_DEF(TASK_GTPV1_U, TASK_PRIORITY_MED, 200)
/// FW_IP task
TASK_DEF(TASK_FW_IP, TASK_PRIORITY_MED, 200)
/// MME Applicative task
TASK_DEF(TASK_MME_APP, TASK_PRIORITY_MED, 200)
/// NAS task
TASK_DEF(TASK_NAS_MME, TASK_PRIORITY_MED, 200)
/// S11 task
TASK_DEF(TASK_S11, TASK_PRIORITY_MED, 200)
/// S1AP task
TASK_DEF(TASK_S1AP, TASK_PRIORITY_MED, 200)
/// S6a task
TASK_DEF(TASK_S6A, TASK_PRIORITY_MED, 200)
/// SCTP task
TASK_DEF(TASK_SCTP, TASK_PRIORITY_MED, 200)
/// Serving and Proxy Gateway Application task
TASK_DEF(TASK_SPGW_APP, TASK_PRIORITY_MED, 200)
/// UDP task
TASK_DEF(TASK_UDP, TASK_PRIORITY_MED, 200)
//MESSAGE GENERATOR TASK
TASK_DEF(TASK_MSC, TASK_PRIORITY_MED, 200)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
MESSAGE_DEF(UDP_INIT, MESSAGE_PRIORITY_MED, udp_init_t, udp_init)
MESSAGE_DEF(UDP_DATA_REQ, MESSAGE_PRIORITY_MED, udp_data_req_t, udp_data_req)
MESSAGE_DEF(UDP_DATA_IND, MESSAGE_PRIORITY_MED, udp_data_ind_t, udp_data_ind)
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#ifndef UDP_MESSAGES_TYPES_H_
#define UDP_MESSAGES_TYPES_H_
#define UDP_INIT(mSGpTR) (mSGpTR)->ittiMsg.udp_init
typedef struct {
uint32_t port;
char *address;
} udp_init_t;
typedef struct {
uint8_t *buffer;
uint32_t buffer_length;
uint32_t buffer_offset;
uint32_t peer_address;
uint32_t peer_port;
} udp_data_req_t;
typedef struct {
uint8_t *buffer;
uint32_t buffer_length;
uint32_t peer_address;
uint32_t peer_port;
} udp_data_ind_t;
#endif /* UDP_MESSAGES_TYPES_H_ */
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#include <string.h>
#include "secu_defs.h"
/*!
* Derive the kNASenc from kasme and perform truncate on the generated key to
* reduce his size to 128 bits. Definition of the derivation function can
* be found in 3GPP TS.33401 #A.7
* @param[in] nas_alg_type NAS algorithm distinguisher
* @param[in] nas_enc_alg_id NAS encryption/integrity algorithm identifier.
* Possible values are:
* - 0 for EIA0 algorithm (Null Integrity Protection algorithm)
* - 1 for 128-EIA1 SNOW 3G
* - 2 for 128-EIA2 AES
* @param[in] kasme Key for MME as provided by AUC
* @param[out] knas Truncated ouput key as derived by KDF
*/
/*int derive_key_nas(algorithm_type_dist_t nas_alg_type, uint8_t nas_enc_alg_id,
const uint8_t kasme[32], uint8_t** knas)
{
uint8_t s[7];
uint8_t knas_temp[32];
// FC
s[0] = 0x15;
// P0 = algorithm type distinguisher
s[1] = nas_alg_type & 0xFF;
// L0 = length(P0) = 1
s[2] = 0x00;
s[3] = 0x01;
// P1
s[4] = nas_enc_alg_id;
// L1 = length(P1) = 1
s[5] = 0x00;
s[6] = 0x01;
kdf((uint8_t*)kasme, 32, s, 7, (uint8_t**)&knas_temp, 32);
// Truncate the generate key to 128 bits
memcpy(knas, knas_temp, 16);
return 0;
}
*/
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment