Skip to content

O
OpenXG-RAN
Commit 69d9c0f7 authored by Elena Lukashova's avatar Elena Lukashova
Browse files
Options

Adding lapack-dev and lapacke-dev to build script

parent a9f583cd
Hide whitespace changes
Inline Side-by-side
Showing with 207 additions and 203 deletions
cmake_targets/tools/build_helper
View file @ 69d9c0f7
......@@ -56,7 +56,7 @@ white='\E[37m'
reset_color='\E[00m'
COLORIZE=1
cecho() {
cecho() {
# Color-echo
# arg1 = message
# arg2 = color
......@@ -147,10 +147,10 @@ clean_kernel() {
clean_all_files() {
set_openair_env
dir=$OPENAIR_DIR/cmake_targets
rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
rm -rf $dir/log $OPENAIR_DIR/targets/bin/*
rm -rf $dir/lte_build_oai $dir/lte-simulators/build
rm -rf $dir/oaisim_build_oai/build $dir/oaisim_build_oai/CMakeLists.txt
rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
rm -rf $dir/autotests/bin $dir/autotests/log $dir/autotests/*/build
}
###################################
......@@ -272,7 +272,7 @@ check_install_usrp_uhd_driver(){
v=$(lsb_release -cs)
$SUDO apt-add-repository --remove "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/$v $v main"
# The new USRP repository
# Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
# Raphael Defosseux: Adding a loop on adding PPA because in CI the gpg key retrieve may
# timeout due to proxy / network latencies in Eurecom on VM
echo_info "\nAdding PPA repository ettusresearch/uhd\n"
x=0
......@@ -352,7 +352,7 @@ check_install_bladerf_driver(){
fi
$SUDO apt-get install -y --allow-unauthenticated bladerf libbladerf-dev
$SUDO apt-get install -y --allow-unauthenticated bladerf-firmware-fx3
$SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40
$SUDO apt-get install -y --allow-unauthenticated bladerf-fpga-hostedx40
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
install_bladerf_driver_from_source
else
......@@ -373,7 +373,7 @@ check_install_lmssdr_driver(){
echo_error "lmssdr support implies installing lmssdr drivers and tools" \
" from sources. check:"
echo_info "https://open-cells.com/index.php/2017/05/10/limesdr-installation/"
echo_fatal "Cannot compile lmssdr device"
echo_fatal "Cannot compile lmssdr device"
fi
......@@ -470,7 +470,7 @@ check_install_additional_tools (){
python2-matplotlib"
fi
$SUDO $INSTALLER install -y $PACKAGE_LIST
$SUDO rm -fr /opt/ssh
$SUDO GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/ssh.git /opt/ssh
......@@ -549,6 +549,8 @@ check_install_oai_software() {
iptables-dev \
libatlas-base-dev \
libblas-dev \
liblapack-dev\
liblapacke-dev\
libffi-dev \
libforms-bin \
libforms-dev \
......@@ -602,7 +604,7 @@ check_install_oai_software() {
# Fedora repos already contain gccxml's successor castxml.
$SUDO $INSTALLER install -y castxml
fi
$SUDO $INSTALLER install -y \
autoconf \
automake \
......@@ -689,7 +691,7 @@ install_asn1c_from_source(){
}
#################################################
# 2. compile
# 2. compile
################################################
install_nas_tools() {
......@@ -718,7 +720,7 @@ set_openair_env(){
[ -f "/.$fullpath" ] || fullpath=`readlink -f $PWD/$fullpath`
openair_path=${fullpath%/cmake_targets/*}
openair_path=${openair_path%/targets/*}
openair_path=${openair_path%/openair[123]/*}
openair_path=${openair_path%/openair[123]/*}
export OPENAIR_DIR=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
......@@ -735,7 +737,7 @@ ppid=$$
arraycounter=1
echo_info "** Trapped CTRL-C. Killing all subprocesses now..."
echo_info "** Calling sync now..."
sync
sync
while true
do
FORLOOP=FALSE
......@@ -753,7 +755,7 @@ do
arraycounter=`expr $arraycounter - 1`
## We want to kill child process id first and then parent id's
while [ $arraycounter -ne 0 ]
do
do
echo "first we send ctrl-c to program"
$SUDO kill -INT "${procid[$arraycounter]}"
sleep 5
......
targets/build_helper.bash
View file @ 69d9c0f7
......@@ -23,7 +23,7 @@
# brief
# author Lionel Gauthier and Navid Nikaein
# company Eurecom
# email: lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
# email: lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
#
#######################################
# Helper Func
......@@ -42,30 +42,30 @@ declare UBUNTU_REL=`lsb_release -r | cut -f2`
declare UBUNTU_REL_NAME=`lsb_release -cs`
set_build_from_makefile(){
BUILD_FROM_MAKEFILE=$1
BUILD_FROM_MAKEFILE=$1
}
check_for_root_rights() {
# if [[ $EUID -ne $ROOT_EUID ]]; then
if [ $USER != "root" ]; then
SUDO="sudo -E "
echo "Run as a sudoers"
echo "Run as a sudoers"
return 1
else
echo "Run as a root"
else
echo "Run as a root"
return 0
fi
}
test_install_package() {
# usage: test_install_package package_name
if [ $# -eq 1 ]; then
dpkg -s "$1" > /dev/null 2>&1 && {
echo "$1 is installed."
echo "$1 is installed."
} || {
echo "$1 is not installed."
echo "$1 is not installed."
OAI_INSTALLED=0
$SUDO apt-get install -y $@
}
......@@ -73,13 +73,13 @@ test_install_package() {
}
test_uninstall_package() {
if [ $# -eq 1 ]; then
dpkg -s "$1" > /dev/null 2>&1 && {
$SUDO apt-get remove --assume-yes $1
echo "$1 is uninstalled."
$SUDO apt-get remove --assume-yes $1
echo "$1 is uninstalled."
} || {
echo "$1 is not installed."
echo "$1 is not installed."
}
fi
}
......@@ -97,8 +97,8 @@ check_for_machine_type(){
else
if [ ${MACHINE_TYPE} = "i686" ]; then
return 32 # 32-bit stuff here
else
return -1
else
return -1
fi
fi
}
......@@ -108,7 +108,7 @@ check_for_machine_type(){
#####################################################
####################################################
# 1. install the required packages
# 1. install the required packages
####################################################
make_certs(){
......@@ -118,32 +118,32 @@ make_certs(){
mkdir -m 777 -p demoCA
echo 01 > demoCA/serial
touch demoCA/index.txt
echo "creating the certificate"
user=$(whoami)
HOSTNAME=$(hostname -f)
echo "Creating certificate for user '$HOSTNAME'"
# CA self certificate
openssl req -new -batch -x509 -days 3650 -nodes -newkey rsa:1024 -out cacert.pem -keyout cakey.pem -subj /CN=eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
# openssl genrsa -out user.key.pem 1024
openssl genrsa -out hss.key.pem 1024
#openssl req -new -batch -out user.csr.pem -key user.key.pem -subj /CN=$HOSTNAME.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
openssl req -new -batch -out hss.csr.pem -key hss.key.pem -subj /CN=hss.eur/C=FR/ST=PACA/L=Aix/O=Eurecom/OU=CM
openssl ca -cert cacert.pem -keyfile cakey.pem -in hss.csr.pem -out hss.cert.pem -outdir . -batch
if [ ! -d /usr/local/etc/freeDiameter ]; then
echo "Creating non existing directory: /usr/local/etc/freeDiameter/"
$SUDO mkdir /usr/local/etc/freeDiameter/
fi
echo "Copying *.pem to /usr/local/etc/freeDiameter/"
$SUDO cp *.pem /usr/local/etc/freeDiameter/
mv *.pem bin/
# openssl genrsa -out ubuntu.key.pem 1024
# openssl req -new -batch -x509 -out ubuntu.csr.pem -key ubuntu.key.pem -subj /CN=ubuntu.localdomain/C=FR/ST=BdR/L=Aix/O=fD/OU=Tests
# openssl ca -cert cacert.pem -keyfile cakey.pem -in ubuntu.csr.pem -out ubuntu.cert.pem -outdir . -batch
......@@ -151,25 +151,25 @@ make_certs(){
}
check_install_nettle(){
if [ ! -f ./.lock_oaibuild ]; then
if [ $UBUNTU_REL = "12.04" ]; then
if [ ! -f ./.lock_oaibuild ]; then
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
if [ ! -d /usr/local/src/ ]; then
echo "/usr/local/src/ doesn't exist please create one"
exit -1
fi
if [ ! -w /usr/local/src/ ]; then
echo "You don't have permissions to write to /usr/local/src/, installing as a sudoer"
# exit -1
fi
cd /usr/local/src/
echo "Downloading nettle archive"
if [ -f nettle-2.5.tar.gz ]; then
$SUDO rm -f nettle-2.5.tar.gz
fi
......@@ -179,44 +179,44 @@ check_install_nettle(){
if [ -d nettle-2.5 ]; then
$SUDO rm -rf nettle-2.5/
fi
$SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO gunzip nettle-2.5.tar.gz
$SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO gunzip nettle-2.5.tar.gz
$SUDO echo "Uncompressing nettle archive"
$SUDO tar -xf nettle-2.5.tar
cd nettle-2.5/
$SUDO ./configure --disable-openssl --enable-shared --prefix=/usr
$SUDO ./configure --disable-openssl --enable-shared --prefix=/usr
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling nettle"
$SUDO make -j $NUM_CPU
$SUDO make check
$SUDO make install
$SUDO make -j $NUM_CPU
$SUDO make check
$SUDO make install
cd ../
fi
fi
}
check_install_freediamter(){
if [ $UBUNTU_REL = "12.04" ]; then
if [ $UBUNTU_REL = "12.04" ]; then
if [ ! -d /usr/local/src/ ]; then
echo "/usr/local/src/ doesn't exist please create one"
exit -1
fi
if [ ! -w /usr/local/src/ ]; then
echo "You don't have permissions to write to /usr/local/src/, installing as a sudoer"
# exit -1
fi
cd /usr/local/src/
echo "Downloading nettle archive"
if [ -f nettle-2.5.tar.gz ]; then
$SUDO rm -f nettle-2.5.tar.gz
fi
......@@ -226,36 +226,36 @@ check_install_freediamter(){
if [ -d nettle-2.5 ]; then
$SUDO rm -rf nettle-2.5/
fi
$SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO gunzip nettle-2.5.tar.gz
$SUDO wget ftp://ftp.lysator.liu.se/pub/security/lsh/nettle-2.5.tar.gz
$SUDO gunzip nettle-2.5.tar.gz
$SUDO echo "Uncompressing nettle archive"
$SUDO tar -xf nettle-2.5.tar
cd nettle-2.5/
$SUDO ./configure --disable-openssl --enable-shared --prefix=/usr
$SUDO ./configure --disable-openssl --enable-shared --prefix=/usr
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling nettle"
$SUDO make -j $NUM_CPU
$SUDO make check
$SUDO make install
$SUDO make -j $NUM_CPU
$SUDO make check
$SUDO make install
cd ../
fi
echo "Downloading gnutls archive"
if [ -f gnutls-3.1.23.tar.xz ]; then
$SUDO rm -f gnutls-3.1.23.tar.xz
fi
if [ -d gnutls-3.1.23/ ]; then
$SUDO rm -rf gnutls-3.1.23/
fi
test_uninstall_package libgnutls-dev
$SUDO wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
$SUDO wget ftp://ftp.gnutls.org/gcrypt/gnutls/v3.1/gnutls-3.1.23.tar.xz
$SUDO tar -xf gnutls-3.1.23.tar.xz
echo "Uncompressing gnutls archive ($PWD)"
cd gnutls-3.1.23/
......@@ -264,38 +264,38 @@ check_install_freediamter(){
exit -1
fi
echo "Compiling gnutls"
$SUDO make -j $NUM_CPU
$SUDO make install
$SUDO make -j $NUM_CPU
$SUDO make install
cd ../
echo "Downloading freeDiameter archive"
if [ -f 1.1.5.tar.gz ]; then
$SUDO rm -f 1.1.5.tar.gz
fi
if [ -d freeDiameter-1.1.5/ ]; then
$SUDO rm -rf freeDiameter-1.1.5/
fi
$SUDO wget http://www.freediameter.net/hg/freeDiameter/archive/1.1.5.tar.gz
$SUDO tar -xzf 1.1.5.tar.gz
$SUDO wget http://www.freediameter.net/hg/freeDiameter/archive/1.1.5.tar.gz
$SUDO tar -xzf 1.1.5.tar.gz
echo "Uncompressing freeDiameter archive"
cd freeDiameter-1.1.5
$SUDO patch -p1 < $OPENAIR3_DIR/S6A/freediameter/freediameter-1.1.5.patch
$SUDO patch -p1 < $OPENAIR3_DIR/S6A/freediameter/freediameter-1.1.5.patch
$SUDO mkdir build
cd build
$SUDO cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ../
$SUDO cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr ../
if [ $? -ne 0 ]; then
exit -1
fi
echo "Compiling freeDiameter"
$SUDO make -j $NUM_CPU
$SUDO make -j $NUM_CPU
#make help
$SUDO make test
$SUDO sudo make install
$SUDO make test
$SUDO sudo make install
# make_certs
}
......@@ -339,7 +339,7 @@ check_hss_s6a_certificate() {
then
echo_success "HSS S6A: Found valid certificate in /usr/local/etc/freeDiameter"
return 0
else
else
echo_error "Bad hss hostname found in cert file: "$full_hostname " hostname is "`hostname`
fi
fi
......@@ -357,43 +357,43 @@ check_hss_s6a_certificate() {
}
check_install_usrp_uhd_driver(){
if [ ! -f /etc/apt/sources.list.d/ettus.list ] ; then
if [ ! -f /etc/apt/sources.list.d/ettus.list ] ; then
$SUDO bash -c 'echo "deb http://files.ettus.com/binaries/uhd/repo/uhd/ubuntu/`lsb_release -cs` `lsb_release -cs` main" >> /etc/apt/sources.list.d/ettus.list'
$SUDO apt-get update
fi
fi
$SUDO apt-get install -t $UBUNTU_REL_NAME uhd
test_install_package python
test_install_package libboost-all-dev
test_install_package python
test_install_package libboost-all-dev
test_install_package libusb-1.0-0-dev
#test_install_package uhd
}
check_install_oai_software() {
if [ ! -f ./.lock_oaibuild ]; then
if [ ! -f ./.lock_oaibuild ]; then
$SUDO apt-get update
if [ $UBUNTU_REL = "12.04" ]; then
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
else
else
test_install_package nettle-dev
test_install_package nettle-bin
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package dialog
test_install_package flex
test_install_package flex
test_install_package gawk
test_install_package gcc
test_install_package gdb
test_install_package gdb
test_install_package make
test_install_package cmake
test_install_package openssh-client
test_install_package openssh-server
sudo service ssh start
test_install_package unzip
test_install_package unzip
test_install_package autoconf
test_install_package automake
test_install_package bison
......@@ -405,7 +405,7 @@ check_install_oai_software() {
test_install_package gawk
test_install_package gcc
test_install_package gccxml
test_install_package gdb
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package iperf
test_install_package iproute
......@@ -414,6 +414,8 @@ check_install_oai_software() {
test_install_package libatlas-dev
test_install_package libblas3gf
test_install_package libblas-dev
test_install_package liblapack-dev
test_install_package liblapack-dev
# if [ $MACHINE_ARCH = 64 ]; then
test_install_package libconfig8-dev
# else
......@@ -436,7 +438,7 @@ check_install_oai_software() {
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
test_install_package openssl
test_install_package libssl-dev
test_install_package libssl-dev
test_install_package pkg-config
test_install_package python-dev
test_install_package python-pexpect
......@@ -445,90 +447,90 @@ check_install_oai_software() {
test_install_package valgrind
test_install_package doxygen
test_install_package graphviz
# test_install_package libboost-all-dev
if [ $OAI_INSTALLED = 1 ]; then
if [ $OAI_INSTALLED = 1 ]; then
touch ./.lock_oaibuild
fi
fi
else
echo_info "All the required packages installed: skip"
fi
fi
}
check_install_hss_software() {
if [ ! -f ./.lock_oaibuild ]; then
if [ ! -f ./.lock_oaibuild ]; then
$SUDO apt-get update
if [ $UBUNTU_REL = "12.04" ]; then
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
else
else
test_install_package nettle-dev
test_install_package nettle-bin
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
test_install_package build-essential
test_install_package cmake
test_install_package cmake-curses-gui
test_install_package cmake-curses-gui
test_install_package dialog
test_install_package dkms
test_install_package flex
test_install_package flex
test_install_package gawk
test_install_package gcc
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package g++
test_install_package libgmp-dev
test_install_package libgcrypt11-dev
test_install_package libidn11-dev
test_install_package libidn2-0-dev
test_install_package libmysqlclient-dev
test_install_package libtasn1-3-dev
test_install_package libsctp1
test_install_package libsctp-dev
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
test_install_package libgmp-dev
test_install_package libgcrypt11-dev
test_install_package libidn11-dev
test_install_package libidn2-0-dev
test_install_package libmysqlclient-dev
test_install_package libtasn1-3-dev
test_install_package libsctp1
test_install_package libsctp-dev
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
test_install_package make
test_install_package mysql-client
test_install_package mysql-server-core-5.5
test_install_package mysql-client
test_install_package mysql-server-core-5.5
test_install_package mysql-server
test_install_package openssh-client
test_install_package openssh-server
sudo service ssh start
test_install_package phpmyadmin
test_install_package python-dev
test_install_package python-dev
test_install_package sshfs
test_install_package swig
test_install_package unzip
test_install_package swig
test_install_package unzip
# test_install_package nettle-bin
# test_install_package nettle-dev
test_install_package valgrind
test_install_package valgrind
if [ $OAI_INSTALLED = 1 ]; then
if [ $OAI_INSTALLED = 1 ]; then
touch ./.lock_oaibuild
fi
fi
else
echo_info "All the required packages installed: skip"
fi
fi
}
check_install_epc_software() {
if [ ! -f ./.lock_oaibuild ]; then
if [ ! -f ./.lock_oaibuild ]; then
$SUDO apt-get update
if [ $UBUNTU_REL = "12.04" ]; then
if [ $UBUNTU_REL = "12.04" ]; then
test_uninstall_package nettle-dev
test_uninstall_package nettle-bin
else
else
test_install_package nettle-dev
test_install_package nettle-bin
fi
fi
test_install_package autoconf
test_install_package automake
test_install_package bison
......@@ -543,7 +545,7 @@ check_install_epc_software() {
test_install_package gawk
test_install_package gcc
test_install_package gccxml
test_install_package gdb
test_install_package gdb
test_install_package guile-2.0-dev
test_install_package gtkwave
test_install_package iperf
......@@ -573,7 +575,7 @@ check_install_epc_software() {
test_install_package libsctp-dev
test_install_package libssl-dev
test_install_package libtasn1-3-dev
test_install_package libtool
test_install_package libtool
test_install_package libxml2
test_install_package libxml2-dev
# test_install_package linux-headers-`uname -r`
......@@ -593,21 +595,21 @@ check_install_epc_software() {
test_install_package unzip
test_install_package valgrind
test_install_package vlan
if [ $OAI_INSTALLED = 1 ]; then
if [ $OAI_INSTALLED = 1 ]; then
touch ./.lock_oaibuild
fi
fi
else
echo_info "All the required packages installed: skip"
fi
fi
}
check_install_asn1c(){
test_command_install_script "asn1c" "$OPENAIR_TARGETS/SCRIPTS/install_asn1c_0.9.24.modified.bash $SUDO"
# One mor check about version of asn1c
ASN1C_COMPILER_REQUIRED_VERSION_MESSAGE="ASN.1 Compiler, v0.9.24"
ASN1C_COMPILER_VERSION_MESSAGE=`asn1c -h 2>&1 | grep -i ASN\.1\ Compiler`
......@@ -624,15 +626,15 @@ check_install_asn1c(){
fi
done
fi
}
#################################################
# 2. compile
# 2. compile
################################################
compile_hss() {
cd $OPENAIR3_DIR/OPENAIRHSS
if [ "$1" -eq 1 ]; then
echo_info "build a clean HSS"
rm -rfv obj*
......@@ -642,14 +644,14 @@ compile_hss() {
fi
OBJ_DIR=`find . -maxdepth 1 -type d -iname obj*`
if [ ! -n "$OBJ_DIR" ]; then
OBJ_DIR="objs"
mkdir --verbose -m 777 ./$OBJ_DIR
else
OBJ_DIR=`basename $OBJ_DIR`
fi
if [ ! -f "$OBJ_DIR"/Makefile ]; then
if [ ! -d m4 ]; then
mkdir --verbose -m 777 m4
......@@ -661,7 +663,7 @@ compile_hss() {
fi
cd $OBJ_DIR
echo_success "Invoking configure"
../configure
../configure
if [ $? -ne 0 ]; then
return 1
fi
......@@ -675,7 +677,7 @@ compile_hss() {
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
return 1
else
else
return 0
fi
else
......@@ -705,11 +707,11 @@ compile_epc() {
fi
bash_exec "autoreconf -i -f"
echo_success "Invoking autogen"
bash_exec "libtoolize"
bash_exec "libtoolize"
bash_exec "./autogen.sh"
cd ./$OBJ_DIR
echo_success "Invoking configure"
if [ $DEBUG -ne 0 ]; then
if [ $DEBUG -ne 0 ]; then
../configure --enable-debug --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib
else
../configure --enable-standalone-epc --enable-gtp1u-in-kernel LDFLAGS=-L/usr/local/lib
......@@ -727,30 +729,30 @@ compile_epc() {
if [ $? -ne 0 ]; then
echo_error "Build failed, exiting"
return 1
else
else
cp -pf ./OAI_EPC/oai_epc $OPENAIR_TARGETS/bin
fi
else
echo_error "Configure failed, exiting"
return 1
fi
cd $OPENAIR3_DIR/GTPV1-U/GTPUAH;
make
if [ $? -ne 0 ]; then
echo_error "Build GTPUAH module failed, exiting"
return 1
else
else
$SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables
$SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin
fi
cd $OPENAIR3_DIR/GTPV1-U/GTPURH;
make
if [ $? -ne 0 ]; then
echo_error "Build GTPURH module failed, exiting"
return 1
else
else
$SUDO cp -pfv ./Bin/libxt_*.so /lib/xtables
$SUDO cp -pfv ./Bin/*.ko $OPENAIR_TARGETS/bin
fi
......@@ -777,15 +779,15 @@ compile_ltesoftmodem() {
if [ $? -ne 0 ]; then
# to locate easily compilation error in log file
make $SOFTMODEM_DIRECTIVES
fi
fi
if [ $? -ne 0 ]; then
if [ ! -f ./lte-softmodem ]; then
if [ ! -f ./lte-softmodem ]; then
echo_error "Build lte-softmodem failed, returning"
return 1
else
else
cp -pf ./lte-softmodem $OPENAIR_TARGETS/bin
return 0
fi
fi
else
cp -pf ./lte-softmodem $OPENAIR_TARGETS/bin
return 0
......@@ -801,11 +803,11 @@ compile_oaisim() {
if [ -f Makefile ]; then
echo "Compiling for oaisim target ($OAISIM_DIRECTIVES)"
make cleanall > /dev/null
make -j $NUM_CPU $OAISIM_DIRECTIVES
make -j $NUM_CPU $OAISIM_DIRECTIVES
if [ $? -ne 0 ]; then
echo_error "Build oaisim failed, returning"
return 1
else
else
cp -pf ./oaisim $OPENAIR_TARGETS/bin
return 0
fi
......@@ -820,11 +822,11 @@ compile_unisim() {
if [ -f Makefile ]; then
echo "Compiling for UNISIM target ..."
make cleanall
make -j $NUM_CPU all
make -j $NUM_CPU all
if [ $? -ne 0 ]; then
echo_error "Build unisim failed, returning"
return 1
else
else
cp -pf ./dlsim $OPENAIR_TARGETS/bin
cp -pf ./ulsim $OPENAIR_TARGETS/bin
cp -pf ./pucchsim $OPENAIR_TARGETS/bin
......@@ -843,9 +845,9 @@ compile_unisim() {
compile_nas_tools() {
export NVRAM_DIR=$OPENAIR_TARGETS/bin
cd $NVRAM_DIR
if [ ! -f /tmp/nas_cleaned ]; then
echo_success "make --directory=$OPENAIR3_DIR/NAS/EURECOM-NAS/tools veryveryclean"
make --directory=$OPENAIR3_DIR/NAS/EURECOM-NAS/tools veryveryclean
......@@ -963,11 +965,11 @@ check_for_nas_ue_executable() {
###############################################
# arg1 is RT
# arg2 is HW
# arg2 is HW
# arg3 is ENB_S1
install_ltesoftmodem() {
# RT
if [ $1 = "RTAI" ]; then
if [ $1 = "RTAI" ]; then
if [ ! -f /tmp/init_rt_done.tmp ]; then
echo_info " 8.1 Insert RTAI modules"
$SUDO insmod /usr/realtime/modules/rtai_hal.ko > /dev/null 2>&1
......@@ -982,46 +984,46 @@ install_ltesoftmodem() {
fi
fi
#HW
if [ $2 = "EXMIMO" ]; then
if [ $2 = "EXMIMO" ]; then
echo_info " 8.2 [EXMIMO] creating RTAI fifos"
for i in `seq 0 64`; do
for i in `seq 0 64`; do
have_rtfX=`ls /dev/ |grep -c rtf$i`;
if [ "$have_rtfX" -eq 0 ] ; then
$SUDO mknod -m 666 /dev/rtf$i c 150 $i;
if [ "$have_rtfX" -eq 0 ] ; then
$SUDO mknod -m 666 /dev/rtf$i c 150 $i;
fi;
done
echo_info " 8.3 [EXMIMO] Build lte-softmodemdrivers"
cd $OPENAIR_TARGETS/ARCH/EXMIMO/DRIVER/eurecom && make clean && make # || exit 1
cd $OPENAIR_TARGETS/ARCH/EXMIMO/USERSPACE/OAI_FW_INIT && make clean && make # || exit 1
echo_info " 8.4 [EXMIMO] Setup RF card"
cd $OPENAIR_TARGETS/RT/USER
. ./init_exmimo2.sh
else
else
if [ $2 = "USRP" ]; then
echo_info " 8.2 [USRP] "
fi
fi
# ENB_S1
if [ $3 = 0 ]; then
if [ $3 = 0 ]; then
cd $OPENAIR2_DIR && make clean && make nasmesh_netlink.ko #|| exit 1
cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make # || exit 1
fi
}
# arg1 is ENB_S1 'boolean'
install_oaisim() {
if [ $1 = 0 ]; then
if [ $1 = 0 ]; then
cd $OPENAIR2_DIR && make clean && make nasmesh_netlink.ko #|| exit 1
cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make # || exit 1
else
compile_ue_ip_nw_driver
install_nas_tools
fi
fi
}
......@@ -1041,7 +1043,7 @@ install_nas_tools() {
}
install_nasmesh(){
echo_success "LOAD NASMESH IP DRIVER FOR UE AND eNB"
echo_success "LOAD NASMESH IP DRIVER FOR UE AND eNB"
(cd $OPENAIR2_DIR/NAS/DRIVER/MESH/RB_TOOL && make clean && make)
(cd $OPENAIR2_DIR && make clean && make nasmesh_netlink_address_fix.ko)
$SUDO rmmod nasmesh
......@@ -1069,7 +1071,7 @@ create_hss_database(){
fi
set_openair_env
# removed %
#Q1="GRANT ALL PRIVILEGES ON *.* TO '$3'@'%' IDENTIFIED BY '$4' WITH GRANT OPTION;"
Q1="GRANT ALL PRIVILEGES ON *.* TO '$3'@'localhost' IDENTIFIED BY '$4' WITH GRANT OPTION;"
......@@ -1082,8 +1084,8 @@ create_hss_database(){
else
echo_success "$3 permissions succeeded"
fi
Q1="CREATE DATABASE IF NOT EXISTS ${BTICK}$5${BTICK};"
SQL="${Q1}"
$MYSQL -u $3 --password=$4 -e "$SQL"
......@@ -1093,12 +1095,12 @@ create_hss_database(){
else
echo_success "$5 creation succeeded"
fi
# test if tables have been created
mysql -u $3 --password=$4 -e "desc $5.users" > /dev/null 2>&1
if [ $? -eq 1 ]; then
if [ $? -eq 1 ]; then
$MYSQL -u $3 --password=$4 $5 < $OPENAIR3_DIR/OPENAIRHSS/db/oai_db.sql
if [ $? -ne 0 ]; then
echo_error "$5 tables creation failed"
......@@ -1107,7 +1109,7 @@ create_hss_database(){
echo_success "$5 tables creation succeeded"
fi
fi
return 0
}
......@@ -1176,7 +1178,7 @@ print_help_perf(){
}
###############################
## echo and family
## echo and family
###############################
black='\E[30m'
red='\E[31m'
......@@ -1196,10 +1198,10 @@ cecho() # Color-echo
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
if [ $BUILD_FROM_MAKEFILE = 0 ]; then
if [ $BUILD_FROM_MAKEFILE = 0 ]; then
echo -e -n "$color$message$reset_color"
echo
else
else
echo "$message"
fi
return
......@@ -1304,7 +1306,7 @@ assert() {
if [ -z "$2" ] ; then # Not enought parameters passed.
return $E_PARAM_ERR
fi
lineno=$2
if [ ! $1 ]; then
echo_error "Assertion failed: \"$1\""
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment