Skip to content

O
OpenXG-RAN
Commit 81eb3930 authored by laurent's avatar laurent
Browse files
Options

add preeliminary support for ubuntu 20 or debian 11, add file for 5G SA

parent e52948a0
Show whitespace changes
Inline Side-by-side
Showing with 553 additions and 0 deletions
cmake_targets/install_external_packages.ubuntu20 0 → 100755
View file @ 81eb3930
#!/bin/bash
#/*
# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
# * contributor license agreements. See the NOTICE file distributed with
# * this work for additional information regarding copyright ownership.
# * The OpenAirInterface Software Alliance licenses this file to You under
# * the OAI Public License, Version 1.1 (the "License"); you may not use this file
# * except in compliance with the License.
# * You may obtain a copy of the License at
# *
# * http://www.openairinterface.org/?page_id=698
# *
# * Unless required by applicable law or agreed to in writing, software
# * distributed under the License is distributed on an "AS IS" BASIS,
# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# * See the License for the specific language governing permissions and
# * limitations under the License.
# *-------------------------------------------------------------------------------
# * For more information about the OpenAirInterface (OAI) Software Alliance:
# * contact@openairinterface.org
# */
# brief
# authors Laurent Thomas
#
#######################################
if [ ! -f /etc/os-release ]; then
echo "No /etc/os-release file found. You're likely on an unsupported distro."
exit 1
fi
OS_DISTRO=$(grep "^ID=" /etc/os-release | sed "s/ID=//" | sed "s/\"//g")
OS_RELEASE=$(grep "^VERSION_ID=" /etc/os-release | sed "s/VERSION_ID=//" | sed "s/\"//g")
case "$OS_DISTRO" in
ubuntu) OS_BASEDISTRO="debian"; INSTALLER="apt"; CMAKE="cmake" ;;
esac
SUDO='sudo -E'
###############################
## echo and family
###############################
black='\E[30m'
red='\E[31m'
green='\E[32m'
yellow='\E[33m'
blue='\E[1;34m'
magenta='\E[35m'
cyan='\E[36m'
white='\E[37m'
reset_color='\E[00m'
COLORIZE=1
cecho() {
# Color-echo
# arg1 = message
# arg2 = color
local default_msg="No Message."
message=${1:-$default_msg}
color=${2:-$green}
[ "$COLORIZE" = "1" ] && message="$color$message$reset_color"
echo -e "$message"
return
}
echo_error() { cecho "$* $red" ;}
echo_fatal() { cecho "$* $red"; exit 1 ;}
echo_warning() { cecho "$* $yellow" ;}
echo_success() { cecho "$* $green" ;}
echo_info() { cecho "$* $blue" ;}
########################
# distribution helpers #
########################
# This function return a string to identify the distribution we are running
# Examples:
# ubuntu16.04
# debian8.5
get_distribution_release() {
echo "$OS_DISTRO$OS_RELEASE"
}
check_supported_distribution() {
case $(get_distribution_release) in
"ubuntu20.04") return 0 ;;
esac
return 1
}
##################
# Error handlers #
##################
handler_EXIT() {
local exit_code=$?
[ "$exit_code" -eq 0 ] || echo_error "build have failed"
exit $exit_code
}
trap handler_EXIT EXIT
###########################
# Cleaners
###########################
clean_kernel() {
$SUDO modprobe ip_tables
$SUDO modprobe x_tables
$SUDO iptables -P INPUT ACCEPT
$SUDO iptables -F INPUT
$SUDO iptables -P OUTPUT ACCEPT
$SUDO iptables -F OUTPUT
$SUDO iptables -P FORWARD ACCEPT
$SUDO iptables -F FORWARD
$SUDO iptables -t nat -F
$SUDO iptables -t mangle -F
$SUDO iptables -t filter -F
$SUDO iptables -t raw -F
echo_info "Flushed iptables"
$SUDO rmmod nasmesh > /dev/null 2>&1
$SUDO rmmod oai_nw_drv > /dev/null 2>&1
$SUDO rmmod openair_rf > /dev/null 2>&1
$SUDO rmmod ue_ip > /dev/null 2>&1
echo_info "removed drivers from kernel"
}
clean_all_files() {
set_openair_env
rm -rf "$OPENAIR_DIR"/targets/bin/*
dir="$OPENAIR_DIR/cmake_targets"
rm -rf "$dir"/log/*
rm -rf "$dir"/ran_build/build
rm -rf "$dir"/ran_build_noLOG/build
rm -rf "$dir"/lte-simulators/build
rm -rf "$dir"/phy_simulators/build
rm -rf "$dir"/nas_sim_tools/build
rm -rf "$dir"/oaisim_build_oai/build
rm -rf "$dir"/oaisim_build_oai/CMakeLists.txt
rm -rf "$dir"/autotests/bin
rm -rf "$dir"/autotests/log
rm -rf "$dir"/autotests/*/build
}
############################################
# External packages installers
############################################
install_protobuf_from_source(){
protobuf_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_install_log.txt
echo_info "\nInstalling Google Protobuf from sources. The log file for Protobuf installation is here: $protobuf_install_log "
(
cd /tmp || exit
echo "Downloading protobuf"
#rm -rf /tmp/protobuf-2.6.1.tar.gz* /tmp/protobuf-2.6.1
#wget https://github.com/google/protobuf/releases/download/v2.6.1/protobuf-2.6.1.tar.gz
#tar -xzvf protobuf-2.6.1.tar.gz --owner $USER --group $USER --no-same-owner
#cd protobuf-2.6.1/
rm -rf /tmp/protobuf-cpp-3.3.0.tar.gz* /tmp/protobuf-3.3.0
wget --tries=3 --retry-connrefused https://github.com/google/protobuf/releases/download/v3.3.0/protobuf-cpp-3.3.0.tar.gz
tar -xzvf protobuf-cpp-3.3.0.tar.gz --owner "$USER" --group "$(groups | cut -d" " -f1)" --no-same-owner
cd protobuf-3.3.0/ || exit
./configure
echo "Compiling protobuf"
make -j"$(nproc)"
$SUDO make install
$SUDO ldconfig
) >& "$protobuf_install_log"
}
install_protobuf_c_from_source(){
protobuf_c_install_log=$OPENAIR_DIR/cmake_targets/log/protobuf_c_install_log.txt
echo_info "\nInstalling Google Protobuf_C from sources. The log file for Protobuf_C installation is here: $protobuf_c_install_log "
(
if [[ "$OS_DISTRO" == "rhel" ]] || [[ "$OS_DISTRO" == "centos" ]]; then
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
fi
cd /tmp || exit
echo "Downloading protobuf-c"
rm -rf /tmp/protobuf-c
git clone https://github.com/protobuf-c/protobuf-c.git
cd protobuf-c || exit
git checkout 2a46af42784abf86804d536f6e0122d47cfeea45
./autogen.sh
./configure
echo "Compiling protobuf-c"
make -j"$(nproc)"
$SUDO make install
$SUDO ldconfig
) >& "$protobuf_c_install_log"
}
install_usrp_uhd_driver_from_source(){
uhd_install_log=$OPENAIR_DIR/cmake_targets/log/uhd_install_log.txt
echo_info "\nInstalling UHD driver from sources. The log file for UHD driver installation is here: $uhd_install_log "
(
cd /tmp || exit
echo "Downloading UHD driver"
rm -rf /tmp/uhd
git clone https://github.com/EttusResearch/uhd.git
cd uhd || exit
git checkout tags/v3.13.0.2
mkdir -p host/build
cd host/build || exit
$CMAKE ../
echo "Compiling UHD"
make -j"$(nproc)"
make test
$SUDO make install
$SUDO ldconfig
) >& "$uhd_install_log"
}
install_bladerf_driver_from_source(){
bladerf_install_log=$OPENAIR_DIR/cmake_targets/log/bladerf_install_log.txt
echo_info "\nInstalling BladeRF driver from sources. The log file for BladeRF driver installation is here: $bladerf_install_log "
(
cd /tmp || exit
echo "Downloading BladeRF driver"
rm -rf /tmp/bladeRF
git clone https://github.com/Nuand/bladeRF.git
cd bladeRF || exit
git checkout tags/2016.06
mkdir -p build
cd build || exit
$CMAKE ../
echo "Compiling BladeRF driver"
make -j"$(nproc)"
$SUDO make install
$SUDO ldconfig
echo "Downloading FPGA and firmware images"
cd /tmp/bladeRF || exit
wget --tries=3 --retry-connrefused https://www.nuand.com/fx3/bladeRF_fw_latest.img
wget --tries=3 --retry-connrefused https://www.nuand.com/fpga/hostedx40-latest.rbf
sudo mkdir -p /usr/share/Nuand/bladeRF
sudo mv bladeRF_fw_latest.img /usr/share/Nuand/bladeRF/bladeRF_fw.img
sudo mv hostedx40-latest.rbf /usr/share/Nuand/bladeRF/hostedx40.rbf
) >& "$bladerf_install_log"
}
check_install_bladerf_driver(){
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
$SUDO apt-get install -y bladerf libbladerf-dev
$SUDO apt-get install -y bladerf-firmware-fx3
$SUDO apt-get install -y bladerf-fpga-hostedx40
elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
install_bladerf_driver_from_source
else
echo_error "BladeRF Installer for OAI does not support automatic build. Install BladeRF compiling sources manually from BladeRF website"
fi
}
flash_firmware_bladerf() {
$SUDO bladeRF-cli --flash-firmware /usr/share/Nuand/bladeRF/bladeRF_fw.img
}
install_soapy_from_source(){
soapy_install_log=$OPENAIR_DIR/cmake_targets/log/soapy_install_log.txt
echo_info "\nInstalling Soapy EcoSystem from source. The log file for Soapy installation is here: $soapy_install_log "
(
cd /tmp || exit
echo "Downloading SoapySDR"
rm -rf /tmp/soapysdr
git clone -b soapy-sdr-0.7.0 --single-branch https://github.com/pothosware/SoapySDR.git
cd SoapySDR || exit
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build || exit
$CMAKE ../
echo "Compiling SoapySDR"
make -j"$(nproc)"
$SUDO make install
$SUDO ldconfig
cd /tmp || exit
echo "Downloading SoapyRemote"
rm -rf /tmp/soapyremote
git clone -b soapy-remote-0.5.0 --single-branch https://github.com/pothosware/SoapyRemote.git
cd SoapyRemote || exit
#git checkout tags/release_003_010_001_001
mkdir -p build
cd build || exit
cmake ../
echo "Compiling SoapyRemote"
make -j"$(nproc)"
$SUDO make install
$SUDO ldconfig
) >& "$soapy_install_log"
}
install_soapy_iris_from_source(){
iris_install_log=$OPENAIR_DIR/cmake_targets/log/iris_install_log.txt
echo_info "\nInstalling Iris driver from source. The log file for Iris driver installation is here: $iris_install_log "
(
cd /tmp || exit
echo "Downloading SoapyIris"
rm -rf /tmp/sklk-soapyiris
git clone -b soapy-iris-2018.08.0.1 --single-branch https://github.com/skylarkwireless/sklk-soapyiris.git
cd sklk-soapyiris || exit
mkdir -p build
cd build ||exit
cmake ../
echo "Compiling SoapyIris"
make -j"$(nproc)"
$SUDO make install
$SUDO ldconfig
) >& "$iris_install_log"
}
check_install_soapy () {
#if [[ "$OS_DISTRO" == "ubuntu" ]]; then
#first we remove old installation
$SUDO apt-get remove -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote || true
#$SUDO add-apt-repository -y ppa:myriadrf/drivers
#$SUDO apt-get update
#$SUDO apt-get install -y soapysdr soapysdr-server libsoapysdr-dev python-soapysdr python3-soapysdr soapysdr-module-remote
#elif [[ "$OS_BASEDISTRO" == "fedora" ]]; then
# $SUDO $INSTALLER -y install software-properties-common python3-software-properties python-software-properties subversion git python3 python-numpy python3-numpy cmake swig python-dev
install_soapy_from_source
#fi
install_soapy_iris_from_source
}
check_install_ubuntu_packages() {
$SUDO $INSTALLER update -y
if [[ "$OS_DISTRO" == "ubuntu" ]]; then
local LAPACK_LIBNAME="liblapack.so"
local LAPACK_TARGET="/usr/lib/atlas-base/atlas/liblapack.so"
$SUDO apt install -y software-properties-common
case "$(get_distribution_release)" in
"ubuntu20.04")
specific_packages="libtasn1-6-dev libgnutls28-dev iproute2 libconfig-dev"
LAPACK_LIBNAME="liblapack.so-x86_64-linux-gnu"
LAPACK_TARGET="/usr/lib/x86_64-linux-gnu/atlas/liblapack.so"
;;
esac
$SUDO $INSTALLER install -y \
$specific_packages \
check \
dialog \
dkms \
gawk \
libboost-all-dev \
libpthread-stubs0-dev \
openvpn \
pkg-config \
python3-dev \
python-pexpect \
sshfs \
swig \
tshark \
uml-utilities \
unzip \
valgrind \
vlan \
exuberant-ctags \
ntpdate \
iperf3 \
android-tools-adb \
wvdial \
python-numpy \
sshpass \
nscd \
bc \
ntp \
python3-scipy \
python3-matplotlib \
bison \
build-essential \
cmake \
cmake-curses-gui \
ninja-build \
doxygen \
doxygen-gui \
texlive-latex-base \
ethtool \
flex \
gdb \
git \
graphviz \
gtkwave \
guile-2.0-dev \
iperf \
iptables \
libxtables-dev \
libatlas-base-dev \
libblas-dev \
liblapack-dev\
liblapacke-dev\
libffi-dev \
libforms-bin \
libforms-dev \
libgcrypt20-dev \
libgmp-dev \
libgtk-3-dev \
libidn2-0-dev \
libidn11-dev \
libmysqlclient-dev \
libpython2.7-dev \
libsctp1 \
libsctp-dev \
libssl-dev \
libtool \
libusb-1.0-0-dev \
libxml2 \
libxml2-dev \
libxslt1-dev \
mscgen \
octave-signal \
openssh-client \
openssh-server \
openssl \
python3 \
subversion \
xmlstarlet \
python3-pip \
libyaml-dev \
wget \
libxpm-dev \
libboost-all-dev \
nettle-dev \
nettle-bin
fi
$SUDO update-alternatives --set "$LAPACK_LIBNAME" "$LAPACK_TARGET"
}
install_asn1c_from_source(){
asn1_install_log=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_log "
(
$SUDO rm -rf /tmp/asn1c
# GIT_SSL_NO_VERIFY=true git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
git clone https://gitlab.eurecom.fr/oai/asn1c.git /tmp/asn1c
cd /tmp/asn1c || exit
# better to use a given commit than a branch in case the branch
# is updated and requires modifications in the source of OAI
#git checkout velichkov_s1ap_plus_option_group
git checkout f12568d617dbf48497588f8e227d70388fa217c9
autoreconf -iv
./configure
make -j"$(nproc)"
$SUDO make install
cd - || exit
$SUDO ldconfig
) > "$asn1_install_log" 2>&1
}
#################################################
# 2. compile
################################################
install_nas_tools() {
echo_success "generate .ue_emm.nvram .ue.nvram"
./nvram --gen -c "$1" -o "$2"
./usim --gen -c "$1" -o "$2"
}
################################
# set_openair_env
###############################
set_openair_env(){
fullpath=$(readlink -f "${BASH_SOURCE[0]}")
[ -f "/.$fullpath" ] || fullpath=$(readlink -f "$PWD/$fullpath")
openair_path=${fullpath%/cmake_targets/*}
openair_path=${openair_path%/targets/*}
openair_path=${openair_path%/openair[123]/*}
export OPENAIR_DIR=$openair_path
export OPENAIR1_DIR=$openair_path/openair1
export OPENAIR2_DIR=$openair_path/openair2
export OPENAIR3_DIR=$openair_path/openair3
export OPENAIR_TARGETS=$openair_path/targets
}
if ! check_supported_distribution; then
echo_error "Your distribution $(get_distribution_release) is not supported by oai !"
exit 1
fi
echo_info "Installing packages"
check_install_ubuntu_packages
echo_info "installing ASN.1 compiler"
install_asn1c_from_source
echo_info "installing protobuf/protobuf-c for flexran agent support"
install_protobuf_from_source
install_protobuf_c_from_source
if [ "$1" == "USRP" ] ; then
echo_info "installing packages for USRP support"
install_usrp_uhd_driver
fi
if [ "$1" == "BLADERF" ] ; then
echo_info "installing packages for BLADERF support"
check_install_bladerf_driver
flash_firmware_bladerf
fi
if [ "$1" == "IRIS" ] ; then
echo_info "installing packages for IRIS support"
check_install_soapy
# flash_firmware_iris
fi
openair2/RRC/NR/nr_rrc_gNB.c 0 → 100644
View file @ 81eb3930
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Author and copyright: Laurent Thomas, open-cells.com
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
rrc_gNB_send_NGAP_NAS_FIRST_REQ() {
// We are noCore only now
// create message that should come from 5GC
// send it dow
rrc_gNB_process_NGAP_DOWNLINK_NAS()
}
rrc_gNB_process_NGAP_DOWNLINK_NAS () {
do_DLInformationTransfer();
// send it as DL data
rrc_data_req (
&ctxt,
srb_id,
(*rrc_eNB_mui)++,
SDU_CONFIRM_NO,
length,
buffer,
PDCP_TRANSMISSION_MODE_CONTROL);
}
:q
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment