intbetter_rsrp_reported=-140-(-0);/*minimum_measured_RSRP_value - minimum_differntail_RSRP_value*///considering the minimum RSRP value as better RSRP initially
uint8_tdiff_rsrp_idx=0;
uint8_ti,j;
if(n_dl_bwp<4)
pdsch_bwp_id=bwp_id;
else
pdsch_bwp_id=bwp_id-1;// as per table 7.3.1.1.2-1 in 38.212
/*Example:
CRI_SSBRI: 1 2 3 4| 5 6 7 8| 9 10 1 2|
nb_of_csi_ssb_report = 3 //3 sets as above
nr_ssbri_cri = 4 //each set has 4 elements
storing ssb indexes in ssb_index array as ssb_index[0] = 1 .. ssb_index[4] = 5
ssb_rsrp[0] = strongest rsrp in first set, ssb_rsrp[4] = strongest rsrp in second set, ..
//OAI currently focusing on Non CA usecase hence 0 is considered as serving
//cell id
sched_ctrl->UE_mac_ce_ctrl.pdcch_state_ind.servingCellId=0;//0 for PCell as 38.331 v15.9.0 page 353 //serving cell id for which this MAC CE applies
sched_ctrl->UE_mac_ce_ctrl.pdcch_state_ind.coresetId=0;//coreset id for which the TCI State id is being indicated
/* 38.321 v15.8.0 page 66
TCI State ID: This field indicates the TCI state identified by TCI-StateId as specified in TS 38.331 [5] applicable
to the Control Resource Set identified by CORESET ID field.
If the field of CORESET ID is set to 0,
this field indicates a TCI-StateId for a TCI state of the first 64 TCI-states configured by tci-States-ToAddModList and tciStates-ToReleaseList in the PDSCH-Config in the active BWP.
If the field of CORESET ID is set to the other value than 0,
this field indicates a TCI-StateId configured by tci-StatesPDCCH-ToAddList and tciStatesPDCCH-ToReleaseList in the controlResourceSet identified by the indicated CORESET ID.
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.array[0])){///For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1 for spec 38.212
CSI_report_bitlen=&(UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen);//This might need to be moodif for Aperiodic CSI-RS measurements
intbetter_rsrp_reported=-140-(-0);/*minimum_measured_RSRP_value - minimum_differntail_RSRP_value*///considering the minimum RSRP value as better RSRP initially
uint8_tdiff_rsrp_idx=0;
uint8_ti,j;
if(n_dl_bwp<4)
pdsch_bwp_id=bwp_id;
else
pdsch_bwp_id=bwp_id-1;// as per table 7.3.1.1.2-1 in 38.212
/*Example:
CRI_SSBRI: 1 2 3 4| 5 6 7 8| 9 10 1 2|
nb_of_csi_ssb_report = 3 //3 sets as above
nr_ssbri_cri = 4 //each set has 4 elements
storing ssb indexes in ssb_index array as ssb_index[0] = 1 .. ssb_index[4] = 5
ssb_rsrp[0] = strongest rsrp in first set, ssb_rsrp[4] = strongest rsrp in second set, ..
//OAI currently focusing on Non CA usecase hence 0 is considered as serving
//cell id
sched_ctrl->UE_mac_ce_ctrl.pdcch_state_ind.servingCellId=0;//0 for PCell as 38.331 v15.9.0 page 353 //serving cell id for which this MAC CE applies
sched_ctrl->UE_mac_ce_ctrl.pdcch_state_ind.coresetId=0;//coreset id for which the TCI State id is being indicated
/* 38.321 v15.8.0 page 66
TCI State ID: This field indicates the TCI state identified by TCI-StateId as specified in TS 38.331 [5] applicable
to the Control Resource Set identified by CORESET ID field.
If the field of CORESET ID is set to 0,
this field indicates a TCI-StateId for a TCI state of the first 64 TCI-states configured by tci-States-ToAddModList and tciStates-ToReleaseList in the PDSCH-Config in the active BWP.
If the field of CORESET ID is set to the other value than 0,
this field indicates a TCI-StateId configured by tci-StatesPDCCH-ToAddList and tciStatesPDCCH-ToReleaseList in the controlResourceSet identified by the indicated CORESET ID.
/*! As per the spec 38.212 and table: 6.3.1.1.2-12 in a single UCI sequence we can have multiple CSI_report
* the number of CSI_report will depend on number of CSI resource sets that are configured in CSI-ResourceConfig RRC IE
* From spec 38.331 from the IE CSI-ResourceConfig for SSB RSRP reporting we can configure only one resource set
* From spec 38.214 section 5.2.1.2 For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1
*/
/** from 38.214 sec 5.2.1.4.2
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'disabled', the UE is
not required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in
a single report nrofReportedRS (higher layer configured) different CRI or SSBRI for each report setting
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'enabled', the UE is not
required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in a
single reporting instance two different CRI or SSBRI for each report setting, where CSI-RS and/or SSB
resources can be received simultaneously by the UE either with a single spatial domain receive filter, or with