Skip to content

O
OpenXG-RAN
Commit 8bb295c0 authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files
Options

CI: adding support for IF4p5 testing 

Signed-off-by: default avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent a7e36b04
Hide whitespace changes
Inline Side-by-side
Showing with 479 additions and 9 deletions
ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf 0 → 100644
View file @ 8bb295c0
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -25;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
//Parameters for SIB18
rxPool_sc_CP_Len = "normal";
rxPool_sc_Period = "sf40";
rxPool_data_CP_Len = "normal";
rxPool_ResourceConfig_prb_Num = 20;
rxPool_ResourceConfig_prb_Start = 5;
rxPool_ResourceConfig_prb_End = 44;
rxPool_ResourceConfig_offsetIndicator_present = "prSmall";
rxPool_ResourceConfig_offsetIndicator_choice = 0;
rxPool_ResourceConfig_subframeBitmap_present = "prBs40";
rxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "00000000000000000000";
rxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
/* rxPool_dataHoppingConfig_hoppingParameter = 0;
rxPool_dataHoppingConfig_numSubbands = "ns1";
rxPool_dataHoppingConfig_rbOffset = 0;
rxPool_commTxResourceUC-ReqAllowed = "TRUE";
*/
// Parameters for SIB19
discRxPool_cp_Len = "normal"
discRxPool_discPeriod = "rf32"
discRxPool_numRetx = 1;
discRxPool_numRepetition = 2;
discRxPool_ResourceConfig_prb_Num = 5;
discRxPool_ResourceConfig_prb_Start = 3;
discRxPool_ResourceConfig_prb_End = 21;
discRxPool_ResourceConfig_offsetIndicator_present = "prSmall";
discRxPool_ResourceConfig_offsetIndicator_choice = 0;
discRxPool_ResourceConfig_subframeBitmap_present = "prBs40";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
phy_test_mode = 0;
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_if_name = "lo";
remote_address = "127.0.0.2";
local_address = "127.0.0.1";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "no"
tr_preference = "udp_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "lo";
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/conf_files/rru.fdd.band7.conf 0 → 100644
View file @ 8bb295c0
RUs = (
{
local_if_name = "lo";
remote_address = "127.0.0.1"
local_address = "127.0.0.2";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
local_rf = "yes"
tr_preference = "udp_if4p5";
nb_tx = 1;
nb_rx = 1;
max_pdschReferenceSignalPower = -27;
max_rxgain = 115;
bands = [7];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config = {
global_log_level ="error";
global_log_verbosity ="medium";
hw_log_level ="error";
hw_log_verbosity ="medium";
phy_log_level ="error";
phy_log_verbosity ="medium";
mac_log_level ="error";
mac_log_verbosity ="high";
rlc_log_level ="error";
rlc_log_verbosity ="medium";
pdcp_log_level ="error";
pdcp_log_verbosity ="medium";
rrc_log_level ="error";
rrc_log_verbosity ="medium";
};
ci-scripts/main.py
View file @ 8bb295c0
......@@ -95,6 +95,7 @@ class SSHConnection():
self.Build_eNB_args = ''
self.Initialize_eNB_args = ''
self.eNBLogFile = ''
self.eNB_instance = ''
self.ping_args = ''
self.ping_packetloss_threshold = ''
self.iperf_args = ''
......@@ -357,6 +358,10 @@ class SSHConnection():
else:
sys.exit('Insufficient Parameter')
ci_full_config_file = config_path + '/ci-' + config_file
rruCheck = False
result = re.search('rru', str(config_file))
if result is not None:
rruCheck = True
# Make a copy and adapt to EPC / eNB IP addresses
self.command('cp ' + full_config_file + ' ' + ci_full_config_file, '\$', 5)
self.command('sed -i -e \'s/mme_ip_address.*$/mme_ip_address = ( { ipv4 = "' + self.EPCIPAddress + '";/\' ' + ci_full_config_file, '\$', 2);
......@@ -366,11 +371,12 @@ class SSHConnection():
# Launch eNB with the modified config file
self.command('source oaienv', '\$', 5)
self.command('cd cmake_targets', '\$', 5)
self.command('echo "ulimit -c unlimited && ./lte_build_oai/build/lte-softmodem -O ' + self.eNBSourceCodePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run.sh ', '\$', 5)
self.command('chmod 775 ./my-lte-softmodem-run.sh ', '\$', 5)
self.command('echo "ulimit -c unlimited && ./lte_build_oai/build/lte-softmodem -O ' + self.eNBSourceCodePath + '/' + ci_full_config_file + extra_options + '" > ./my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh ', '\$', 5)
self.command('chmod 775 ./my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh ', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S rm -Rf enb_' + SSH.testCase_id + '.log', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S -E daemon --inherit --unsafe --name=enb_daemon --chdir=' + self.eNBSourceCodePath + '/cmake_targets -o ' + self.eNBSourceCodePath + '/cmake_targets/enb_' + SSH.testCase_id + '.log ./my-lte-softmodem-run.sh', '\$', 5)
self.eNBLogFile = 'enb_' + SSH.testCase_id + '.log'
self.command('echo ' + self.eNBPassword + ' | sudo -S -E daemon --inherit --unsafe --name=enb' + str(SSH.eNB_instance) + '_daemon --chdir=' + self.eNBSourceCodePath + '/cmake_targets -o ' + self.eNBSourceCodePath + '/cmake_targets/enb_' + SSH.testCase_id + '.log ./my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh', '\$', 5)
if not rruCheck:
self.eNBLogFile = 'enb_' + SSH.testCase_id + '.log'
time.sleep(6)
doLoop = True
loopCounter = 10
......@@ -384,8 +390,11 @@ class SSHConnection():
self.close()
sys.exit(1)
else:
self.command('stdbuf -o0 cat enb_' + SSH.testCase_id + '.log | grep --color=never -i sync', '\$', 4)
result = re.search('got sync', str(self.ssh.before))
self.command('stdbuf -o0 cat enb_' + SSH.testCase_id + '.log | egrep --color=never -i "wait|sync"', '\$', 4)
if rruCheck:
result = re.search('wait RUs', str(self.ssh.before))
else:
result = re.search('got sync', str(self.ssh.before))
if result is None:
time.sleep(6)
else:
......@@ -1474,8 +1483,8 @@ class SSHConnection():
def TerminateeNB(self):
self.open(self.eNBIPAddress, self.eNBUserName, self.eNBPassword)
self.command('cd ' + self.eNBSourceCodePath + '/cmake_targets', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S daemon --name=enb_daemon --stop', '\$', 5)
self.command('rm -f my-lte-softmodem-run.sh', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S daemon --name=enb' + str(SSH.eNB_instance) + '_daemon --stop', '\$', 5)
self.command('rm -f my-lte-softmodem-run' + str(SSH.eNB_instance) + '.sh', '\$', 5)
self.command('echo ' + self.eNBPassword + ' | sudo -S killall --signal SIGINT lte-softmodem || true', '\$', 5)
time.sleep(5)
self.command('stdbuf -o0 ps -aux | grep -v grep | grep lte-softmodem', '\$', 5)
......@@ -1493,9 +1502,9 @@ class SSHConnection():
sys.exit(1)
else:
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
self.eNBLogFile = ''
else:
self.CreateHtmlTestRow('N/A', 'OK', ALL_PROCESSES_OK)
self.eNBLogFile = ''
def TerminateHSS(self):
self.open(self.EPCIPAddress, self.EPCUserName, self.EPCPassword)
......@@ -1865,6 +1874,14 @@ def GetParametersFromXML(action):
if action == 'Initialize_eNB':
SSH.Initialize_eNB_args = test.findtext('Initialize_eNB_args')
SSH.eNB_instance = test.findtext('eNB_instance')
if (SSH.eNB_instance is None):
SSH.eNB_instance = '0'
if action == 'Terminate_eNB':
SSH.eNB_instance = test.findtext('eNB_instance')
if (SSH.eNB_instance is None):
SSH.eNB_instance = '0'
if action == 'Ping':
SSH.ping_args = test.findtext('ping_args')
......
ci-scripts/xml_files/if4p5_usrp210_band7.xml 0 → 100644
View file @ 8bb295c0
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<TestCaseRequestedList>010101 050101 060101 070101 040101 030101 030102 040301 040501 040604 040642 040401 040201 030201 030202 050201 060201 070201</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="010101">
<class>Build_eNB</class>
<desc>Build eNB (USRP)</desc>
<Build_eNB_args>-t ETHERNET -w USRP -c --eNB</Build_eNB_args>
</testCase>
<testCase id="030101">
<class>Initialize_eNB</class>
<desc>Initialize RRU (FDD/Band7)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/rru.fdd.band7.conf --codingw --fepw</Initialize_eNB_args>
<eNB_instance>1</eNB_instance>
</testCase>
<testCase id="030102">
<class>Initialize_eNB</class>
<desc>Initialize RCC (FDD/Band7/5MHz)</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/rcc.band7.tm1.if4p5.lo.25PRB.usrpb210.conf --codingw --fepw</Initialize_eNB_args>
<eNB_instance>0</eNB_instance>
</testCase>
<testCase id="030201">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
<eNB_instance>0</eNB_instance>
</testCase>
<testCase id="030202">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
<eNB_instance>1</eNB_instance>
</testCase>
<testCase id="040101">
<class>Initialize_UE</class>
<desc>Initialize UE</desc>
</testCase>
<testCase id="040201">
<class>Terminate_UE</class>
<desc>Terminate UE</desc>
</testCase>
<testCase id="040301">
<class>Attach_UE</class>
<desc>Attach UE</desc>
</testCase>
<testCase id="040401">
<class>Detach_UE</class>
<desc>Detach UE</desc>
</testCase>
<testCase id="040501">
<class>Ping</class>
<desc>ping (5MHz - 20 sec)</desc>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>5</ping_packetloss_threshold>
</testCase>
<testCase id="040604">
<class>Iperf</class>
<desc>iperf (5MHz - DL/15Mbps/UDP)(30 sec)(single-ue profile)</desc>
<iperf_args>-u -b 15M -t 30 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="040642">
<class>Iperf</class>
<desc>iperf (5MHz - UL/9Mbps/UDP)(30 sec)(single-ue profile)</desc>
<iperf_args>-u -b 9M -t 30 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="050101">
<class>Initialize_HSS</class>
<desc>Initialize HSS</desc>
</testCase>
<testCase id="060101">
<class>Initialize_MME</class>
<desc>Initialize MME</desc>
</testCase>
<testCase id="070101">
<class>Initialize_SPGW</class>
<desc>Initialize SPGW</desc>
</testCase>
<testCase id="050201">
<class>Terminate_HSS</class>
<desc>Terminate HSS</desc>
</testCase>
<testCase id="060201">
<class>Terminate_MME</class>
<desc>Terminate MME</desc>
</testCase>
<testCase id="070201">
<class>Terminate_SPGW</class>
<desc>Terminate SPGW</desc>
</testCase>
</testCaseList>
targets/RT/USER/lte-softmodem.c
View file @ 8bb295c0
......@@ -1070,6 +1070,8 @@ int main( int argc, char **argv )
}
printf("wait RUs\n");
fflush(stdout);
fflush(stderr);
wait_RUs();
printf("ALL RUs READY!\n");
printf("RC.nb_RU:%d\n", RC.nb_RU);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment