Merge remote-tracking branch 'origin/interns_summer23' into integration_2023_w38

openair1/SIMULATION/NR_PHY/dlsim.c

@@ -85,7 +85,6 @@ PHY_VARS_gNB *gNB;
 PHY_VARS_NR_UE *UE;
 RAN_CONTEXT_t RC;
 int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
-
 double cpuf;
 char *uecap_file;
 
@@ -275,6 +274,8 @@ int NB_UE_INST = 1;
 
 int main(int argc, char **argv)
 {
+  FILE *csv_file = NULL;
+  char *filename_csv = NULL;
   setbuf(stdout, NULL);
   int c;
   int i,aa;//,l;
@@ -363,7 +364,7 @@ int main(int argc, char **argv)
 
   FILE *scg_fd=NULL;
 
-  while ((c = getopt(argc, argv, "f:hA:p:f:g:i:n:s:S:t:v:x:y:z:o:M:N:F:GR:d:PI:L:a:b:e:m:w:T:U:q:X:Y")) != -1) {
+  while ((c = getopt(argc, argv, "f:hA:p:f:g:i:n:s:S:t:v:x:y:z:o:M:N:F:GR:d:PI:L:a:b:e:m:w:T:U:q:X:Y:Z:")) != -1) {
     switch (c) {
     case 'f':
       scg_fd = fopen(optarg,"r");
@@ -374,10 +375,6 @@ int main(int argc, char **argv)
       }
       break;
 
-    /*case 'd':
-      frame_type = 1;
-      break;*/
-
     case 'g':
       switch ((char)*optarg) {
         case 'A':
@@ -545,6 +542,10 @@ int main(int argc, char **argv)
       //target_error_rate=0.1;
       slot = 0;
       break;
+    case 'Z' :
+      filename_csv = strdup(optarg);
+      AssertFatal(filename_csv != NULL, "strdup() error: errno %d\n", errno);
+      break;
 
     case 'o':
       delay = atoi(optarg);
@@ -552,47 +553,38 @@ int main(int argc, char **argv)
 
     default:
     case 'h':
-      printf("%s -h(elp) -p(extended_prefix) -N cell_id -f output_filename -F input_filename -g channel_model -n n_frames -s snr0 -S snr1 -x transmission_mode -y TXant -z RXant -i Intefrence0 -j Interference1 -A interpolation_file -C(alibration offset dB) -N CellId\n",
-             argv[0]);
+      printf("%s -h(elp)\n", argv[0]);
+      printf("-a Start PRB for PDSCH\n");
+      printf("-b Number of PRB for PDSCH\n");
+      printf("-d number of dlsch threads, 0: no dlsch parallelization\n");
+      printf("-e MSC index\n");
+      printf("-f raw file containing RRC configuration (generated by gNB)\n");
+      printf("-g Channel model: [A] TDLA30, [B] TDLB100, [C] TDLC300, e.g. -g A\n");
       printf("-h This message\n");
-      printf("-L <log level, 0(errors), 1(warning), 2(analysis), 3(info), 4(debug), 5(trace)>\n");
-      //printf("-p Use extended prefix mode\n");
-      //printf("-d Use TDD\n");
+      printf("-i Change channel estimation technique. Arguments list: Frequency domain {0:Linear interpolation, 1:PRB based averaging}, Time domain {0:Estimates of last DMRS symbol, 1:Average of DMRS symbols}\n");
+      printf("-m Numerology\n");
       printf("-n Number of frames to simulate\n");
+      printf("-o Introduce delay in terms of number of samples\n");
+      printf("-p Precoding matrix index\n");
+      printf("-q MCS Table index\n");
       printf("-s Starting SNR, runs from SNR0 to SNR0 + 5 dB.  If n_frames is 1 then just SNR is simulated\n");
       printf("-S Ending SNR, runs from SNR0 to SNR1\n");
-      //printf("-t Delay spread for multipath channel\n");
-      printf("-g Channel model: [A] TDLA30, [B] TDLB100, [C] TDLC300, e.g. -g A\n");
-      printf("-o Introduce delay in terms of number of samples\n");
+      printf("-t Acceptable effective throughput (in percentage)\n");
+      printf("-v Maximum number of rounds\n");
+      printf("-w Write txdata to binary file (one frame)\n");
+      printf("-x Num of layer for PDSCH\n");
       printf("-y Number of TX antennas used in gNB\n");
       printf("-z Number of RX antennas used in UE\n");
-      printf("-x Num of layer for PDSCH\n");
-      printf("-p Precoding matrix index\n");
-      printf("-i Change channel estimation technique. Arguments list: Frequency domain {0:Linear interpolation, 1:PRB based averaging}, Time domain {0:Estimates of last DMRS symbol, 1:Average of DMRS symbols}\n");
-      //printf("-j Relative strength of second intefering gNB (in dB) - cell_id mod 3 = 2\n");
-      printf("-R N_RB_DL\n");
-      printf("-O oversampling factor (1,2,4,8,16)\n");
-      printf("-A Interpolation_filname Run with Abstraction to generate Scatter plot using interpolation polynomial in file\n");
-      //printf("-C Generate Calibration information for Abstraction (effective SNR adjustment to remove Pe bias w.r.t. AWGN)\n");
-      printf("-f raw file containing RRC configuration (generated by gNB)\n");
       printf("-F Input filename (.txt format) for RX conformance testing\n");
-      printf("-o CORESET offset\n");
-      printf("-a Start PRB for PDSCH\n");
-      printf("-b Number of PRB for PDSCH\n");
-      printf("-c Start symbol for PDSCH (fixed for now)\n");
-      printf("-j Number of symbols for PDSCH (fixed for now)\n");
-      printf("-e MSC index\n");
-      printf("-q MCS Table index\n");
-      printf("-t Acceptable effective throughput (in percentage)\n");
       printf("-I Maximum LDPC decoder iterations\n");
+      printf("-L <log level, 0(errors), 1(warning), 2(analysis), 3(info), 4(debug), 5(trace)>\n");
+      printf("-P Print DLSCH performances\n");
+      printf("-R N_RB_DL\n");
       printf("-T Enable PTRS, arguments list L_PTRS{0,1,2} K_PTRS{2,4}, e.g. -T 2 0 2 \n");
       printf("-U Change DMRS Config, arguments list DMRS TYPE{0=A,1=B} DMRS AddPos{0:2} DMRS ConfType{1:2}, e.g. -U 3 0 2 1 \n");
-      printf("-P Print DLSCH performances\n");
-      printf("-v Maximum number of rounds\n");
-      printf("-w Write txdata to binary file (one frame)\n");
-      printf("-d number of dlsch threads, 0: no dlsch parallelization\n");
       printf("-X gNB thread pool configuration, n => no threads\n");
       printf("-Y Run initial sync in UE\n");
+      printf("-Z Output filename (.csv format) for stats\n");
       exit (-1);
       break;
     }
@@ -925,6 +917,20 @@ int main(int argc, char **argv)
   uint32_t dlsch_bytes = a_segments*1056;  // allocated bytes per segment
   UE->phy_sim_dlsch_b = calloc(1, dlsch_bytes);
 
+  // csv file
+  if (filename_csv != NULL) {
+    csv_file = fopen(filename_csv, "a");
+    if (csv_file == NULL) {
+      printf("Can't open file \"%s\", errno %d\n", filename_csv, errno);
+      return 1;
+    }
+    // adding name of parameters into file
+    fprintf(csv_file,"SNR,false_positive,");
+    for (int r = 0; r < num_rounds; r++)
+      fprintf(csv_file,"n_errors_%d,errors_scrambling_%d,channel_bler_%d,channel_ber_%d,",r,r,r,r);
+    fprintf(csv_file,"avg_round,eff_rate,eff_throughput,TBS\n");
+  }
+  //---------------
   for (SNR = snr0; SNR < snr1; SNR += .2) {
 
     varArray_t *table_tx=initVarArray(1000,sizeof(double));
@@ -1057,7 +1063,6 @@ int main(int argc, char **argv)
                                  slot);
           }
         }
-       
         if (n_trials==1) {
           char filename[100];//LOG_M
           for (aa=0;aa<n_tx;aa++) {
@@ -1111,7 +1116,6 @@ int main(int argc, char **argv)
         pdsch_processing(UE,
                          &UE_proc,
                          &phy_data);
-        
         //----------------------------------------------------------
         //---------------------- count errors ----------------------
         //----------------------------------------------------------
@@ -1163,7 +1167,6 @@ int main(int argc, char **argv)
 	}
 	
       }
-      
       ////////////////////////////////////////////////////////////
 
       if (errors_bit > 0) {
@@ -1201,7 +1204,13 @@ int main(int argc, char **argv)
     printf(") Avg round %.2f, Eff Rate %.4f bits/slot, Eff Throughput %.2f, TBS %u bits/slot\n", roundStats, effRate, effRate / TBS * 100, TBS);
     printf("*****************************************\n");
     printf("\n");
-
+    // writing to csv file
+    if (filename_csv != NULL) { // means we are asked to print stats to CSV
+      fprintf(csv_file,"%f,%d/%d,",SNR,n_false_positive,n_trials);
+      for (int r = 0; r < num_rounds; r++)
+        fprintf(csv_file,"%d/%d,%u/%u,%f,%e,",n_errors[r], round_trials[r], errors_scrambling[r], available_bits * round_trials[r],blerStats[r],berStats[r]);
+      fprintf(csv_file,"%.2f,%.4f,%.2f,%u\n", roundStats, effRate, effRate / TBS * 100, TBS);
+    }
     if (print_perf==1) {
       printf("\ngNB TX function statistics (per %d us slot, NPRB %d, mcs %d, block %d)\n",
              1000 >> *scc->ssbSubcarrierSpacing,
@@ -1223,7 +1232,6 @@ int main(int argc, char **argv)
       printStatIndent2(&gNB->dlsch_resource_mapping_stats, "DLSCH Resource Mapping time");
       printStatIndent2(&gNB->dlsch_precoding_stats,"DLSCH Layer Precoding time");
 
-
       printf("\nUE RX function statistics (per %d us slot)\n",1000>>*scc->ssbSubcarrierSpacing);
       /*
       printDistribution(&phy_proc_rx_tot, table_rx,"Total PHY proc rx");
@@ -1313,6 +1321,12 @@ int main(int argc, char **argv)
   if (scg_fd)
     fclose(scg_fd);
 
+  // closing csv file
+  if (filename_csv != NULL) { // means we are asked to print stats to CSV
+    fclose(csv_file);
+    free(filename_csv);
+  }
+
   return n_errs;
 }