delete useless file

src/vppe/startup.conf

-unix {
-  nodaemon
-  log /var/log/upf/vpp/vpp.log
-  full-coredump
-  interactive
-  gid vpp
-  cli-listen /run/vpp/cli.sock
-  exec  /work/wys/mul_thread/test_58_mul_thread_v1/135_1014/Buptvppe/config_system.sh
-  logsize 100
-  full-coredump
-  #cli-prompt bupt>>
-}
-
-api-trace {
-  on
-  save-api-table  api-trace.log
-}
-
-api-segment {
-  gid vpp
-}
-
-logging
-{
-    default-log-level info
-    default-syslog-log-level info
-}
-
-
-cpu {
-	## In the VPP there is one main thread and optionally the user can create worker(s)
-	## The main thread and worker thread(s) can be pinned to CPU core(s) manually or automatically
-
-	## Manual pinning of thread(s) to CPU core(s)
-
-	## Set logical CPU core where main thread runs, if main core is not set
-	## VPP will use core 1 if available
-	main-core 13
-
-	## Set logical CPU core(s) where worker threads are running
-	corelist-workers 14-15
-        #corelist-io 5,6,7
-
-	## Automatic pinning of thread(s) to CPU core(s)
-
-	## Sets number of CPU core(s) to be skipped (1 ... N-1)
-	## Skipped CPU core(s) are not used for pinning main thread and working thread(s).
-	## The main thread is automatically pinned to the first available CPU core and worker(s)
-	## are pinned to next free CPU core(s) after core assigned to main thread
-	# skip-cores 4
-
-	## Specify a number of workers to be created
-	## Workers are pinned to N consecutive CPU cores while skipping "skip-cores" CPU core(s)
-	## and main thread's CPU core
-	#workers 2
-
-	## Set scheduling policy and priority of main and worker threads
-
-	## Scheduling policy options are: other (SCHED_OTHER), batch (SCHED_BATCH)
-	## idle (SCHED_IDLE), fifo (SCHED_FIFO), rr (SCHED_RR)
-	scheduler-policy fifo
-
-	## Scheduling priority is used only for "real-time policies (fifo and rr),
-	## and has to be in the range of priorities supported for a particular policy
-	scheduler-priority 50
-}
-
-
-#buffers {
-	## Increase number of buffers allocated, needed only in scenarios with
-	## large number of interfaces and worker threads. Value is per numa node.
- 	## Default is 16384 (8192 if running unpriviledged)
-#	buffers-per-numa 1280000
-        
- #       buffers-per-numa 1048576
-        #buffers-per-numa  2
-        
-        #memory-size-in-mb   2049
-        ## Size of buffer data area
-	## Default is 2048
-#	default data-size 1024
-#}
-
-
-dpdk {
-	## Change default settings for all interfaces
-	dev default {
-		## Number of receive queues, enables RSS
-		## Default is 1
-
-		## Number of transmit queues, Default is equal
-		## to number of worker threads or 1 if no workers treads
-
-		## Number of descriptors in transmit and receive rings
-		## increasing or reducing number can impact performance
-		## Default is 1024 for both rx and tx
-		# num-rx-desc 512
-		# num-tx-desc 512
-
-		## VLAN strip offload mode for interface
-		## Default is off
-		# vlan-strip-offload on
-	}
-
-	## Whitelist specific interface by specifying PCI address
-	
-        #82576 1G
-
-
-	dev 0000:0b:00.0
-	{
-		num-rx-queues 1
-		num-tx-queues 1
-		num-rx-desc   2048
-		num-tx-desc   2048
-	}  
-
-	dev 0000:0b:00.1
-	{
-		num-rx-queues 1
-		num-tx-queues 1
-		num-rx-desc   2048
-		num-tx-desc   2048
-	}  
-
-
- 	## Whitelist specific interface by specifying PCI address and in
-	## addition specify custom parameters for this interface
-	# dev 0000:02:00.1 {
-	#	num-rx-queues 2
-	# }
-
-
-	## Change UIO driver used by VPP, Options are: igb_uio, vfio-pci,
-	## uio_pci_generic or auto (default)
-	#uio-driver vfio-pci
-        #auto
-        #uio_pci_generic
-        #uio-driver igb_uio	 
-
-	## Disable multi-segment buffers, improves performance but
-	## disables Jumbo MTU support
-	#no-multi-seg
-
-	## Change hugepages allocation per-socket, needed only if there is need for
-	## larger number of mbufs. Default is 256M on each detected CPU socket
-	#socket-mem 2048,2048
-
-        #NUMA0 alloc 2G
-        #socket-mem 4,4
-
-
-	## Disables UDP / TCP TX checksum offload. Typically needed for use
-	## faster vector PMDs (together with no-multi-seg)	
-        #no-tx-checksum-offload 
-}
-
-vlib 
-{
-    memory-trace
-    elog-events 1
-    elog-post-mortem-dump
-}
-
-#heapsize 2G
-
-plugins {
-    path  /work/wys/mul_thread/test_58_mul_thread_v1/135_1014/Buptvppe/build-root/install-vpp_debug-native/vpp/lib/vpp_plugins
-
-    plugin default { enable }
-    plugin dpdk_plugin.so { enable }
-    plugin gtpu_plugin.so { enable }
-    plugin upf_plugin.so  { enable }
-}