Skip to content

O
OpenXG-RAN
Commit 1d2d96f3 authored by cig's avatar cig
Browse files
Options

Cleanup RA procedure 

- removed irrelevant prach_config_enabled parameter
- cleanup of commented out code
- minor fixes
- enhancement of logging
parent 895d97d0
Show whitespace changes
Inline Side-by-side
Showing with 13 additions and 33 deletions
openair1/PHY/defs_nr_UE.h
View file @ 1d2d96f3
......@@ -712,7 +712,6 @@ typedef struct {
int16_t *prachF;
int16_t *prach;
fapi_nr_ul_config_prach_pdu prach_pdu;
uint8_t prach_Config_enabled;
} NR_UE_PRACH;
// structure used for multiple SSB detection
......
openair1/SCHED_NR_UE/fapi_nr_ue_l1.c
View file @ 1d2d96f3
......@@ -231,7 +231,6 @@ int8_t nr_ue_scheduled_response(nr_scheduled_response_t *scheduled_response){
// prach config pdu
prach_config_pdu = &ul_config->ul_config_list[i].prach_config_pdu;
memcpy((void*)&(PHY_vars_UE_g[module_id][cc_id]->prach_vars[gNB_id]->prach_pdu), (void*)prach_config_pdu, sizeof(fapi_nr_ul_config_prach_pdu));
PHY_vars_UE_g[module_id][cc_id]->prach_vars[gNB_id]->prach_Config_enabled = 1;
break;
default:
......
openair1/SCHED_NR_UE/phy_procedures_nr_ue.c
View file @ 1d2d96f3
......@@ -241,7 +241,7 @@ void phy_procedures_nrUE_TX(PHY_VARS_NR_UE *ue,
}
if (get_softmodem_params()->do_ra==1) {
if ((ue->UE_mode[gNB_id] > NOT_SYNCHED && ue->UE_mode[gNB_id] < PUSCH) && (ue->prach_vars[gNB_id]->prach_Config_enabled == 1) && ue->mac_enabled) {
if ((ue->UE_mode[gNB_id] > NOT_SYNCHED && ue->UE_mode[gNB_id] < PUSCH) && ue->mac_enabled) {
nr_ue_prach_procedures(ue, proc, gNB_id);
}
}
......@@ -2118,14 +2118,13 @@ uint8_t nr_is_ri_TXOp(PHY_VARS_NR_UE *ue,
return(0);
}
// WIP
// todo:
// - set tx_total_RE
// - power control as per 38.213 ch 7.4
void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t gNB_id) {
int frame_tx = proc->frame_tx, nr_slot_tx = proc->nr_slot_tx, prach_power; // tx_amp
uint16_t /*preamble_tx = 50,*/ pathloss;
uint16_t pathloss;
uint8_t mod_id = ue->Mod_id;
UE_MODE_t UE_mode = get_nrUE_mode(mod_id, ue->CC_id, gNB_id);
NR_PRACH_RESOURCES_t * prach_resources = ue->prach_resources[gNB_id];
......@@ -2133,13 +2132,12 @@ void nr_ue_prach_procedures(PHY_VARS_NR_UE *ue, UE_nr_rxtx_proc_t *proc, uint8_t
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_PHY_PROCEDURES_UE_TX_PRACH, VCD_FUNCTION_IN);
// Delay init RA procedure to allow the convergence of the IIR filter on PRACH noise measurements at gNB side
if (!prach_resources->init_msg1 && ((MAX_FRAME_NUMBER+frame_tx-ue->prach_resources[gNB_id]->sync_frame)% MAX_FRAME_NUMBER)>150){
ue->prach_cnt = 0;
prach_resources->init_msg1 = 1;
}
// ask L2 for RACH transport
LOG_D(PHY, "Getting PRACH resources. Frame %d Slot %d \n", frame_tx, nr_slot_tx);
// flush Msg3 Buffer
if (prach_resources->Msg3 == NULL){
for(int i = 0; i < NUMBER_OF_CONNECTED_gNB_MAX; i++) {
......
openair2/LAYER2/NR_MAC_UE/nr_ra_procedures.c
View file @ 1d2d96f3
......@@ -32,19 +32,6 @@
#include "mac.h"
/*
#include "common/utils/LOG/vcd_signal_dumper.h"
#include "PHY_INTERFACE/phy_interface_extern.h"
#include "SCHED_UE/sched_UE.h"
#include "COMMON/mac_rrc_primitives.h"
#include "RRC/LTE/rrc_extern.h"
#include "RRC/L2_INTERFACE/openair_rrc_L2_interface.h"
#include "common/utils/LOG/log.h"
#include "UTIL/OPT/opt.h"
#include "OCG.h"
#include "OCG_extern.h"
#include "PHY/LTE_ESTIMATION/lte_estimation.h"*/
/* Tools */
#include "SIMULATION/TOOLS/sim.h" // for taus
......@@ -65,10 +52,10 @@
extern int64_t table_6_3_3_2_3_prachConfig_Index [256][9];
//extern uint8_t nfapi_mode;
static uint8_t first_Msg3 = 0;
void nr_get_RA_window(NR_UE_MAC_INST_t *mac);
// WIP
// This routine implements Section 5.1.2 (UE Random Access Resource Selection)
// and Section 5.1.3 (Random Access Preamble Transmission) from 3GPP TS 38.321
void nr_get_prach_resources(module_id_t mod_id,
......@@ -93,13 +80,14 @@ void nr_get_prach_resources(module_id_t mod_id,
nr_rach_ConfigCommon = scc->uplinkConfigCommon->initialUplinkBWP->rach_ConfigCommon->choice.setup;
rach_ConfigGeneric = &nr_rach_ConfigCommon->rach_ConfigGeneric;
LOG_D(PHY, "Getting PRACH resources frame (first_Msg3 %d)\n", __FUNCTION__, first_Msg3);
// NR_RSRP_Range_t rsrp_ThresholdSSB; // todo
///////////////////////////////////////////////////////////
//////////* UE Random Access Resource Selection *//////////
///////////////////////////////////////////////////////////
// todo:
// - switch initialisation cases
// -- RA initiated by beam failure recovery operation (subclause 5.17 TS 38.321)
......@@ -208,7 +196,8 @@ void nr_get_prach_resources(module_id_t mod_id,
noGroupB = 1;
} else {
// RA preambles group B is configured
// - Defining the number of RA preambles in RA Preamble Group A for each SSB */
// - Random Access Preambles group B is configured for 4-step RA type
// - Defining the number of RA preambles in RA Preamble Group A for each SSB
sizeOfRA_PreamblesGroupA = nr_rach_ConfigCommon->groupBconfigured->numberOfRA_PreamblesGroupA;
switch (nr_rach_ConfigCommon->groupBconfigured->ra_Msg3SizeGroupA){
/* - Threshold to determine the groups of RA preambles */
......@@ -380,7 +369,6 @@ void nr_Msg3_transmitted(module_id_t mod_id, uint8_t CC_id, frame_t frameP, uint
/// the RA procedure on a SCell shall only be initiated by PDCCH order
/// in the current implementation, RA is contention free only
// WIP
// todo TS 38.321:
// - check if carrier to use is explicitly signalled then do (1) RA CARRIER SELECTION (SUL, NUL) (2) set PCMAX
// - BWP operation (subclause 5.15 TS 38.321)
......@@ -415,8 +403,6 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
//NR_FrequencyInfoDL_t *frequencyInfoDL = scc->downlinkConfigCommon->frequencyInfoDL;
NR_RACH_ConfigDedicated_t *rach_ConfigDedicated = mac->rach_ConfigDedicated;
// int32_t frame_diff = 0;
uint8_t sdu_lcids[NB_RB_MAX] = {0};
uint16_t sdu_lengths[NB_RB_MAX] = {0};
int TBS_bytes = 848, header_length_total=0, num_sdus, offset, preambleTransMax, mac_ce_len;
......@@ -425,8 +411,6 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
if (prach_resources->init_msg1) {
LOG_D(MAC, "nr_ue_get_rach, RA_active value: %d", mac->RA_active);
AssertFatal(setup != NULL, "[UE %d] FATAL nr_rach_ConfigCommon is NULL !!!\n", mod_id);
if (mac->RA_active == 0) {
......@@ -434,6 +418,7 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
LOG_I(MAC, "RA not active. Starting RA preamble initialization.\n");
first_Msg3 = 0;
mac->RA_RAPID_found = 0;
/* Set RA_PREAMBLE_POWER_RAMPING_STEP */
......@@ -509,7 +494,7 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
// Fill in preamble and PRACH resources
if (mac->generate_nr_prach == 1)
nr_get_prach_resources(mod_id, CC_id, gNB_id, nr_slot_tx, prach_resources, prach_pdu, rach_ConfigDedicated);
nr_get_prach_resources(mod_id, CC_id, gNB_id, first_Msg3, prach_resources, prach_pdu, rach_ConfigDedicated);
offset = nr_generate_ulsch_pdu((uint8_t *) mac_sdus, // sdus buffer
(uint8_t *) payload, // UL MAC pdu pointer
......@@ -542,8 +527,7 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
// - handle DL assignment on PDCCH for RA-RNTI
// - handle backoff and raResponseWindow params
// LOG_D(MAC, "[MAC][UE %d][RAPROC] frame %d, subframe %d: RA Active, window cnt %d (RA_tx_frame %d, RA_tx_subframe %d)\n",
// mod_id, frame, nr_slot_tx, mac->RA_window_cnt, mac->RA_tx_frame, mac->RA_tx_subframe);
LOG_D(MAC, "In %s [%d.%d] RA is active: RA window count %d (RA_tx_frame %d, RA_tx_subframe %d)\n", __FUNCTION__, frame, nr_slot_tx, mac->RA_window_cnt, mac->RA_tx_frame, mac->RA_tx_subframe);
if (mac->RA_BI_found){
prach_resources->RA_PREAMBLE_BACKOFF = prach_resources->RA_SCALING_FACTOR_BI * mac->RA_backoff_indicator;
......@@ -636,7 +620,7 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
// Fill in preamble and PRACH resources
if (mac->generate_nr_prach == 1)
nr_get_prach_resources(mod_id, CC_id, gNB_id, nr_slot_tx, prach_resources, prach_pdu, rach_ConfigDedicated);
nr_get_prach_resources(mod_id, CC_id, gNB_id, first_Msg3, prach_resources, prach_pdu, rach_ConfigDedicated);
} else {
......@@ -650,7 +634,7 @@ uint8_t nr_ue_get_rach(NR_PRACH_RESOURCES_t *prach_resources,
// Fill in preamble and PRACH resources
if (mac->generate_nr_prach == 1)
nr_get_prach_resources(mod_id, CC_id, gNB_id, nr_slot_tx, prach_resources, prach_pdu, rach_ConfigDedicated);
nr_get_prach_resources(mod_id, CC_id, gNB_id, first_Msg3, prach_resources, prach_pdu, rach_ConfigDedicated);
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment