Skip to content

O
OpenXG-RAN
Commit 4f616da0 authored by Navid Nikaein's avatar Navid Nikaein
Browse files
Options

add epc.generic.conf file 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@6032 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 5f330873
Show whitespace changes
Inline Side-by-side
Showing with 204 additions and 3 deletions
targets/PROJECTS/GENERIC-LTE-EPC/CONF/epc.generic.conf 0 → 100755
View file @ 4f616da0
# INTERNET GW 192.168.12.100
# |
# |
# 192.168.12.175/24 |
# +-----------+----------------+---+--+---------------------------------------+
# | HSS | | eth1 | |
# +-----------+ +---+--+ |
# | host "olympie" | |
# | | |
# | +-----+------+ |
# | |MASQUERADING| | 192.168.13.17
# | +-----+------+ +----+
# | +------------+ | |eth2+--x disconnected
# | | HSS | | +----+
# | | | | |
# | | | | |
# | | | | |
# | +------------+ +---+--+ |
# | | eth3 | |
# +----------------------------+---+--+---------------------------------------+
# 192.168.13.175/24 |
# |
# | x disconnected
# 192.168.13.17/24 | 192.168.12.175/24|
# +-----------+----------------+---+--+---------------------+---+--+----------+
# | MME | | eth3 | | eth1 | |
# +-----------+ +------+ +------+ |
# | host "yang" |
# | |
# | +-----------------+ |
# | | MME | |
# | | S+P/GW | |
# | | | |
# | | | |
# | | | |
# | | | |
# | | | |
# | +-----------------+ |
# | |
# | |
# | +------+ |
# | | eth2 | |
# +----------------------------+---+--+---------------------------------------+
# 192.168.13.175|
# |
# |
# 192.168.13.82 | (S1-C, S1-U)
# +-----------+----------------+---+--+---------------------------------------+
# | eNB | | eth0 | |
# +-----------+ +------+ |
# | host "calisson" |
# | | 192.168.12.82
# | +----+
# | |eth1+--internet via router
# | +----+
# | |
# +---------------------------------+-----------------------------------------+
# |
# O (RF antenna)
MME :
{
GNU_DEBUGGER = "yes";
REALM = "eur";
# Define the limits of the system in terms of served eNB and served UE.
# When the limits will be reached, overload procedure will take place.
MAXENB = 10;
MAXUE = 100;
RELATIVE_CAPACITY = 10;
# Display statistics about whole system (expressed in seconds)
MME_STATISTIC_TIMER = 10;
EMERGENCY_ATTACH_SUPPORTED = "no";
UNAUTHENTICATED_IMSI_SUPPORTED = "no";
# VERBOSITY: none, info, annoying
VERBOSITY = "none";
IP_CAPABILITY = "IPV4V6";
INTERTASK_INTERFACE :
{
# max queue size per task
ITTI_QUEUE_SIZE = 2000000;
};
S6A :
{
# pwd=$OPENAIR_CN/objs
S6A_CONF = "./s6a.conf";
};
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 32;
SCTP_OUTSTREAMS = 32;
};
# ------- S1AP definitions
S1AP :
{
# outcome drop timer value (seconds)
S1AP_OUTCOME_TIMER = 10;
};
# ------- MME served GUMMEI
GUMMEI :
{
# MME code DEFAULT = 0
# size = 8 bits
# maximum of 256 values, comma separated
MME_CODE = [ 1, 30 , 31, 32, 33, 34, 35, 36, 56 , 29 , 8 ];
# MME GROUP ID DEFAULT = 0
# size = 16 bits
# maximum of 65535 values, comma separated
MME_GID = [ 32768 , 4 , 5 , 30 , 8 , 9 , 50021 ];
# TA (mcc.mnc:tracking area code) DEFAULT = 208.34:0
# max values = 999.999:65535
# maximum of 32 values, comma separated
PLMN = (
{MCC="208" ; MNC="92"; TAC = "1"; },
{MCC="208" ; MNC="10"; TAC = "1"; },
{MCC="209" ; MNC="130"; TAC = "4"; },
{MCC="209" ; MNC="012"; TAC = "2"; },
{MCC="208" ; MNC="35"; TAC = "8"; }
);
};
NAS :
{
# 3GPP TS 33.401 section 7.2.4.3 Procedures for NAS algorithm selection
# decreasing preference goes from left to right
ORDERED_SUPPORTED_INTEGRITY_ALGORITHM_LIST = [ "EIA2" , "EIA1" , "EIA0" ];
ORDERED_SUPPORTED_CIPHERING_ALGORITHM_LIST = [ "EEA0" , "EEA1" , "EEA2" ];
};
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_S1_MME = "eth2";
MME_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.17/24";
MME_INTERFACE_NAME_FOR_S11_MME = "none";
MME_IPV4_ADDRESS_FOR_S11_MME = "0.0.0.0/24";
};
};
S-GW :
{
NETWORK_INTERFACES :
{
SGW_INTERFACE_NAME_FOR_S11 = "none";
SGW_IPV4_ADDRESS_FOR_S11 = "0.0.0.0/24";
SGW_INTERFACE_NAME_FOR_S1U_S12_S4_UP = "eth2";
SGW_IPV4_ADDRESS_FOR_S1U_S12_S4_UP = "192.168.13.17/24";
SGW_IPV4_PORT_FOR_S1U_S12_S4_UP = 2152;
SGW_INTERFACE_NAME_FOR_S5_S8_UP = "none";
SGW_IPV4_ADDRESS_FOR_S5_S8_UP = "0.0.0.0/24";
};
};
P-GW =
{
NETWORK_INTERFACES :
{
PGW_INTERFACE_NAME_FOR_S5_S8 = "none";
PGW_IPV4_ADDRESS_FOR_S5_S8 = "0.0.0.0/24";
PGW_INTERFACE_NAME_FOR_SGI = "eth3";
PGW_IPV4_ADDRESS_FOR_SGI = "192.168.14.17/24";
};
IP_ADDRESS_POOL :
{
IPV4_LIST = (
"192.178.0.0/24",
"192.168.2.60",
"192.178.1.0/24"
);
IPV6_LIST = (
"2014:02:26::0/120"
);
};
};
HSS =
{
NETWORK_INTERFACES :
{
HSS_INTERFACE_NAME_FOR_S6A = "none";
HSS_IPV4_ADDRESS_FOR_S6A = "192.168.14.177/24";
};
};
targets/build_oai.bash
View file @ 4f616da0
......@@ -452,14 +452,15 @@ build_epc(){
echo_success "target epc built and installed in the bin directory"
echo "target epc built and installed in the bin directory" >> bin/${oai_build_date}
cp -f $OPENAIR_TARGETS/PROJECTS/GENERIC-LTE-EPC/CONF/epc.generic.conf $OPENAIR_TARGETS/bin
cp -f $OPENAIRCN_DIR/objs/UTILS/CONF/s6a.conf $OPENAIR_TARGETS/bin
fi
######################################
# run
######################################
echo_info "7. run EPC (check the bin/epc.generic.conf params)"
sudo bin/oai_epc -c bin/epc.generic.conf -K /tmp/itti.log
cd bin/
$SUDO ./oai_epc -c ./epc.generic.conf -K /tmp/itti.log
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment