update instructions for 1-1, update multicast_link.c

d2d_emulator_setup.txt

 Scenario 1 : Off-network UE2UE link
 SynchREF UE (UE1)
 
-UE1(eth0 - 10.10.10.1)--------UE2(eth0 - 10.10.10.2)
+UE1(eth0 - 10.10.10.1)--------UE2(eno1 - 10.10.10.2)
 
 Here's an example of /etc/network/interfaces configuration for UE1
 auto eth0
@@ -39,12 +39,13 @@ UE1:
  - sudo iptables -A POSTROUTING  -t mangle -o oip0 -d 224.0.0.1 -j MARK --set-mark 3
  - (if necessary) sudo route add default gw 10.10.10.1 eth0
 UE2:
- - sudo ifconfig oip1 10.0.0.2
- - sudo iptables -A POSTROUTING  -t mangle -o oip1 -d 224.0.0.1 -j MARK --set-mark 3
- - (if necessary) sudo route add default gw 10.10.10.1 eth0
+ - sudo ifconfig oip0 10.0.0.2
+ - sudo iptables -A POSTROUTING  -t mangle -o oip0 -d 224.0.0.1 -j MARK --set-mark 3
+ - (if necessary) sudo route add default gw 10.10.10.1 eno1
 
 UE1 and UE2: Get and build vencore_app from d2d-l3-stub (branch: l3_stub)
  - gcc -I . vencore_app.c -o vencore_app -lpthread
+ 
 --------------------------------
 TEST ONE-TO-MANY
 Run UE1 then UE2, for example:
@@ -72,7 +73,17 @@ UE1 (sender)
   - ./vencore_app  #we can see the packets appearing in Wireshark
  
  --------------------------------------
-TEST PC5-S (UE1 -sender, UE2 - receiver)
+TEST PC5-S (UE1 -sender, UE2 - receiver) and PC5-U for ONE-TO-ONE scenario
+Configure UE1/UE2
+UE1: 
+ - sudo ifconfig oip0 10.0.0.1
+ - sudo iptables -A POSTROUTING  -t mangle -o oip0 -d 10.0.0.2 -j MARK --set-mark 3
+ - sudo route add default gw 10.10.10.1 eth0
+UE2:
+ - sudo ifconfig oip0 10.0.0.2
+ - sudo iptables -A POSTROUTING  -t mangle -o oip0 -d 10.0.0.1 -j MARK --set-mark 3
+ - sudo route add default gw 10.10.10.1 eno1
+ 
 step 1:
 - UE1: sudo ./lte-softmodem-stub -U --emul-iface eth0
 step 2:
@@ -81,6 +92,9 @@ step 2:
 step 3: 
 - UE1: ./vencore_app -s #send a message via PC5-S (e.g., DirectCommunicationRequest)
 
+Generate unicast traffic
+UE1: ping -I oip0 10.0.0.2
+ 
  
   --------------------------------------
 TEST PC5-D

openair1/SIMULATION/ETH_TRANSPORT/multicast_link.c

@@ -115,7 +115,7 @@ multicast_link_init(void)
 
     if (multicast_if != NULL) {
       if (setsockopt(group_list[group].socket, SOL_SOCKET,SO_BINDTODEVICE,
-                     multicast_if, 4) < 0) {
+                     multicast_if, strlen(multicast_if)) < 0) {
         LOG_E(EMU,
               "[MULTICAST] ERROR : setsockopt:SO_BINDTODEVICE on interface %s, exiting ...\n",
               multicast_if);