/*! As per the spec 38.212 and table: 6.3.1.1.2-12 in a single UCI sequence we can have multiple CSI_report
* the number of CSI_report will depend on number of CSI resource sets that are configured in CSI-ResourceConfig RRC IE
* From spec 38.331 from the IE CSI-ResourceConfig for SSB RSRP reporting we can configure only one resource set
* From spec 38.214 section 5.2.1.2 For periodic and semi-persistent CSI Resource Settings, the number of CSI-RS Resource Sets configured is limited to S=1
*/
for(idx=0;idx<nb_ssb_resource_set;idx++){
/** from 38.214 sec 5.2.1.4.2
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'disabled', the UE is
not required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in
a single report nrofReportedRS (higher layer configured) different CRI or SSBRI for each report setting
- if the UE is configured with the higher layer parameter groupBasedBeamReporting set to 'enabled', the UE is not
required to update measurements for more than 64 CSI-RS and/or SSB resources, and the UE shall report in a
single reporting instance two different CRI or SSBRI for each report setting, where CSI-RS and/or SSB
resources can be received simultaneously by the UE either with a single spatial domain receive filter, or with