Skip to content

O
OpenXG-RAN
Commit b85731f4 authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files
Options

CI: Add LTE RF Simulator test (normal and with MBMS) 

Signed-off-by: default avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent dff766ae
Show whitespace changes
Inline Side-by-side
Showing with 403 additions and 33 deletions
ci-scripts/reportTestLocally.sh
View file @ b85731f4
......@@ -403,11 +403,231 @@ function report_test {
ARCHIVES_LOC=archives/rf_sim/test
if [ -d $ARCHIVES_LOC ]
then
echo " <h3>4G LTE RF Simulator Check</h3>" >> ./test_simulator_results.html
if [ -f $ARCHIVES_LOC/test_final_status.log ]
then
if [ `egrep -c "LTE: TEST_OK" $ARCHIVES_LOC/test_final_status.log` -eq 1 ]
then
echo " <div class=\"alert alert-success\">" >> ./test_simulator_results.html
echo " <strong>TEST was SUCCESSFUL <span class=\"glyphicon glyphicon-ok-circle\"></span></strong>" >> ./test_simulator_results.html
echo " </div>" >> ./test_simulator_results.html
else
echo " <div class=\"alert alert-danger\">" >> ./test_simulator_results.html
echo " <strong>TEST was a FAILURE! <span class=\"glyphicon glyphicon-ban-circle\"></span></strong>" >> ./test_simulator_results.html
echo " </div>" >> ./test_simulator_results.html
fi
else
echo " <div class=\"alert alert-danger\">" >> ./test_simulator_results.html
echo " <strong>COULD NOT DETERMINE TEST FINAL STATUS! <span class=\"glyphicon glyphicon-ban-circle\"></span></strong>" >> ./test_simulator_results.html
echo " </div>" >> ./test_simulator_results.html
fi
echo " <button data-toggle=\"collapse\" data-target=\"#oai-rf-sim-test-details\">More details on 5G RF Simulator test results</button>" >> ./test_simulator_results.html
echo " <div id=\"oai-rf-sim-test-details\" class=\"collapse\">" >> ./test_simulator_results.html
echo " <table border = \"1\">" >> ./test_simulator_results.html
echo " <tr bgcolor = \"#33CCFF\" >" >> ./test_simulator_results.html
echo " <th>Log File Name</th>" >> ./test_simulator_results.html
echo " <th>Command</th>" >> ./test_simulator_results.html
echo " <th>Status</th>" >> ./test_simulator_results.html
echo " <th>Statistics</th>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
EPC_CONFIGS=("wS1 noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
for CN_CONFIG in ${EPC_CONFIGS[@]}
do
for TMODE in ${TRANS_MODES[@]}
do
for BW in ${BW_CASES[@]}
do
echo " <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
if [[ $CN_CONFIG =~ .*wS1.* ]]
then
echo " <td align = \"center\" colspan = 4 >Test with EPC (aka withS1): ${TMODE} -- ${BW}MHz </td>" >> ./test_simulator_results.html
else
echo " <td align = \"center\" colspan = 4 >Test without EPC (aka noS1): ${TMODE} -- ${BW}MHz </td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html
ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_enb.log
UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
then
NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html
NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
if [[ $CN_CONFIG =~ .*noS1.* ]]
then
NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG`
fi
NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG`
NB_ENB_SYNCED_WITH_UE=`egrep -c "Generating RRCConnectionReconfigurationComplete" $UE_LOG`
if [[ $CN_CONFIG =~ .*noS1.* ]]
then
NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG`
else
NB_UE_TUNNEL_UP=`egrep -c "executing ifconfig oaitun_ue1" $UE_LOG`
fi
if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
fi
echo " <td><pre>" >> ./test_simulator_results.html
if [ $NB_ENB_GOT_SYNC -gt 0 ]
then
echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [[ $CN_CONFIG =~ .*noS1.* ]]
then
if [ $NB_ENB_TUNNEL_UP -gt 0 ]
then
echo "<font color = \"blue\">- eNB mounted oaitun_enb1 interface</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER mounted oaitun_enb1 interface</b></font>" >> ./test_simulator_results.html
fi
fi
if [ $NB_UE_GOT_SYNC -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE attached to eNB</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_TUNNEL_UP -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE mounted oaitun_ue1 interface</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER mounted oaitun_ue1 interface</b></font>" >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi
PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_ping*.log 2> /dev/null`
analyzePingFiles
IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl*client*txt | grep -v mbms 2> /dev/null`
analyzeIperfFiles
IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null`
analyzeIperfFiles
done
done
done
# MBMS Case
CN_CONFIG="noS1"
TMODE="fdd"
BW_CASES=(05)
for BW in ${BW_CASES[@]}
do
echo " <tr bgcolor = \"#8FBC8F\" >" >> ./test_simulator_results.html
echo " <td align = \"center\" colspan = 4 >Test MBMS without EPC (aka noS1): ${TMODE} -- ${BW}MHz </td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
ENB_LOG=$ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_enb_mbms.log
UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
then
NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html
NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
NB_ENB_TUNNEL_UP=`egrep -c "Interface oaitun_enb1 successfully configured" $ENB_LOG`
NB_ENB_MTUNNEL_UP=`egrep -c "Interface oaitun_enm1 successfully configured" $ENB_LOG`
NB_UE_GOT_SYNC=`egrep -c "rfsimulator: Success" $UE_LOG`
NB_ENB_SYNCED_WITH_UE=`egrep -c "Generating RRCConnectionReconfigurationComplete" $UE_LOG`
NB_UE_TUNNEL_UP=`egrep -c "Interface oaitun_ue1 successfully configured" $UE_LOG`
NB_UE_MTUNNEL_UP=`egrep -c "Interface oaitun_uem1 successfully configured" $UE_LOG`
NB_UE_MBMS_PUSH_MSG=`egrep -c "TRIED TO PUSH MBMS DATA TO" $UE_LOG`
if [ $NB_ENB_GOT_SYNC -gt 0 ] && [ $NB_UE_GOT_SYNC -gt 0 ] && [ $NB_ENB_SYNCED_WITH_UE -gt 0 ] && [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
fi
echo " <td><pre>" >> ./test_simulator_results.html
if [ $NB_ENB_GOT_SYNC -gt 0 ]
then
echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_ENB_TUNNEL_UP -gt 0 ]
then
echo "<font color = \"blue\">- eNB mounted oaitun_enb1 interface</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER mounted oaitun_enb1 interface</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_ENB_MTUNNEL_UP -gt 0 ]
then
echo "<font color = \"blue\">- eNB mounted oaitun_enm1 interface</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER mounted oaitun_enm1 interface</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_GOT_SYNC -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_ENB_SYNCED_WITH_UE -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE attached to eNB</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_TUNNEL_UP -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE mounted oaitun_ue1 interface</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER mounted oaitun_ue1 interface</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_MTUNNEL_UP -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE mounted oaitun_uem1 interface</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER mounted oaitun_uem1 interface</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_MBMS_PUSH_MSG -gt 0 ]
then
echo "<font color = \"blue\">- LTE UE tried to push ${NB_UE_MBMS_PUSH_MSG} MBMS DATA</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- LTE UE NEVER pushed MBMS DATA</b></font>" >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi
#PING_LOGS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_ping*.log 2> /dev/null`
#analyzePingFiles
#IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl*client*txt | grep -v mbms 2> /dev/null`
#analyzeIperfFiles
#IPERF_TESTS=`ls $ARCHIVES_LOC/${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul*client*txt | grep -v mbms 2> /dev/null`
#analyzeIperfFiles
done
echo " </table>" >> ./test_simulator_results.html
echo " </div>" >> ./test_simulator_results.html
echo " <h3>5G NR RF Simulator Check</h3>" >> ./test_simulator_results.html
if [ -f $ARCHIVES_LOC/test_final_status.log ]
then
if [ `grep -c TEST_OK $ARCHIVES_LOC/test_final_status.log` -eq 1 ]
if [ `egrep -c "5G-NR: TEST_OK" $ARCHIVES_LOC/test_final_status.log` -eq 1 ]
then
echo " <div class=\"alert alert-success\">" >> ./test_simulator_results.html
echo " <strong>TEST was SUCCESSFUL <span class=\"glyphicon glyphicon-ok-circle\"></span></strong>" >> ./test_simulator_results.html
......
ci-scripts/runTestOnVM.sh
View file @ b85731f4
......@@ -169,6 +169,14 @@ function get_ue_ip_addr {
rm $1
}
function get_ue_mbms_ip_addr {
local LOC_IF_ID=$3
echo "ifconfig oaitun_uem${LOC_IF_ID} | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $1
UE_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
echo "Test UE${LOC_IF_ID} MBMS IP Address is : $UE_IP_ADDR"
rm $1
}
function get_enb_noS1_ip_addr {
echo "ifconfig oaitun_enb1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $1
ENB_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
......@@ -176,6 +184,13 @@ function get_enb_noS1_ip_addr {
rm $1
}
function get_enb_mbms_noS1_ip_addr {
echo "ifconfig oaitun_enm1 | egrep \"inet addr\" | sed -e 's#^.*inet addr:##' -e 's# P-t-P:.*\$##'" > $1
ENB_IP_ADDR=`ssh -T -o StrictHostKeyChecking=no ubuntu@$2 < $1`
echo "Test eNB MBMS IP Address is : $ENB_IP_ADDR"
rm $1
}
function ping_ue_ip_addr {
local LOC_FG_OR_BG=$5
echo "echo \"COMMAND IS: ping -c 20 $3\" > $4" > $1
......@@ -957,9 +972,9 @@ function start_rf_sim_enb {
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --log_config.global_log_options level,nocolor --noS1 --eNBs.[0].rrc_inactivity_threshold 0\" > ./my-lte-softmodem-run.sh " >> $1
else
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --log_config.global_log_options level,nocolor \" > ./my-lte-softmodem-run.sh " >> $1
echo "echo \"ulimit -c unlimited && ./lte-softmodem -O /home/ubuntu/tmp/ci-scripts/conf_files/ci-$LOC_CONF_FILE --rfsim --log_config.global_log_options level,nocolor --eNBs.[0].rrc_inactivity_threshold 0 --eNBs.[0].plmn_list.[0].mnc 93\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
......@@ -1015,6 +1030,31 @@ function start_rf_sim_enb {
else
echo "RF-SIM eNB oaitun_enb1 is UP and CONFIGURED"
fi
if [[ $LOC_CONF_FILE =~ .*mbms.* ]]
then
echo "ifconfig oaitun_enm1 | egrep -c \"inet addr\"" > $1
# Checking oaitun_enm1 interface has now an IP address
i="0"
while [ $i -lt 10 ]
do
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_ENB_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
sleep 5
fi
done
rm $1
if [ $i -lt 50 ]
then
ENB_SYNC=0
echo "RF-SIM eNB oaitun_enm1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM eNB oaitun_enm1 is UP and CONFIGURED"
fi
fi
fi
sleep 10
}
......@@ -1027,6 +1067,7 @@ function start_rf_sim_ue {
local LOC_FREQUENCY=$6
# 1 is with S1 and 0 without S1 aka noS1
local LOC_S1_CONFIGURATION=$7
local LOC_MBMS_CONFIGURATION=$8
echo "echo \"sudo apt-get --yes --quiet install daemon \"" > $1
echo "sudo apt-get --yes install daemon >> /home/ubuntu/tmp/cmake_targets/log/daemon-install.txt 2>&1" >> $1
echo "echo \"export RFSIMULATOR=${LOC_ENB_VM_IP_ADDR}\"" >> $1
......@@ -1036,9 +1077,9 @@ function start_rf_sim_ue {
echo "cd /home/ubuntu/tmp/cmake_targets/ran_build/build/" >> $1
if [ $LOC_S1_CONFIGURATION -eq 0 ]
then
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --ue-rxgain 140 --ue-txgain 120 --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor --noS1\" > ./my-lte-softmodem-run.sh " >> $1
else
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor\" > ./my-lte-softmodem-run.sh " >> $1
echo "echo \"ulimit -c unlimited && ./lte-uesoftmodem -C ${LOC_FREQUENCY}000000 -r $LOC_PRB --ue-rxgain 140 --ue-txgain 120 --nokrnmod 1 --rfsim --log_config.global_log_options level,nocolor\" > ./my-lte-softmodem-run.sh " >> $1
fi
echo "chmod 775 ./my-lte-softmodem-run.sh" >> $1
echo "cat ./my-lte-softmodem-run.sh" >> $1
......@@ -1093,6 +1134,31 @@ function start_rf_sim_ue {
else
echo "RF-SIM UE oaitun_ue1 is UP and CONFIGURED"
fi
if [ $LOC_MBMS_CONFIGURATION -eq 1 ]
then
# Checking oaitun_uem1 interface has now an IP address
i="0"
echo "ifconfig oaitun_uem1 | egrep -c \"inet addr\"" > $1
while [ $i -lt 10 ]
do
sleep 5
CONNECTED=`ssh -T -o StrictHostKeyChecking=no ubuntu@$LOC_UE_VM_IP_ADDR < $1`
if [ $CONNECTED -eq 1 ]
then
i="100"
else
i=$[$i+1]
fi
done
rm $1
if [ $i -lt 50 ]
then
UE_SYNC=0
echo "RF-SIM UE oaitun_uem1 is DOWN or NOT CONFIGURED"
else
echo "RF-SIM UE oaitun_uem1 is UP and CONFIGURED"
fi
fi
sleep 10
}
......@@ -1668,7 +1734,7 @@ function run_test_on_vm {
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-ru-sim.* ]]
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
PING_STATUS=0
IPERF_STATUS=0
......@@ -1686,11 +1752,10 @@ function run_test_on_vm {
install_epc_on_vm $EPC_VM_NAME $EPC_VM_CMDS
EPC_VM_IP_ADDR=`uvt-kvm ip $EPC_VM_NAME`
fi
# withS1 configuration is not working
#EPC_CONFIGS=("wS1" "noS1")
#TRANS_MODES=("fdd" "tdd")
#BW_CASES=(05 10 20)
EPC_CONFIGS=("noS1" "wS1")
EPC_CONFIGS=("wS1" "noS1")
TRANS_MODES=("fdd")
BW_CASES=(05)
for CN_CONFIG in ${EPC_CONFIGS[@]}
......@@ -1754,7 +1819,7 @@ function run_test_on_vm {
echo "${CN_CONFIG} : Starting the UE"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ue.log
start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG
start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 0
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
......@@ -1762,13 +1827,13 @@ function run_test_on_vm {
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
if [ $S1_NOS1_CFG -eq 1 ]
then
terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
fi
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
#if [ $S1_NOS1_CFG -eq 1 ]
#then
# terminate_epc $EPC_VM_CMDS $EPC_VM_IP_ADDR
#fi
# Now we keep running
STATUS=-1
return
break
fi
if [ $S1_NOS1_CFG -eq 1 ]
......@@ -1814,15 +1879,37 @@ function run_test_on_vm {
check_ping_result $ARCHIVES_LOC/$PING_LOG_FILE 20
fi
if [ $S1_NOS1_CFG -eq 0 ]
if [ $S1_NOS1_CFG -eq 1 ]
then
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and EPC is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
THROUGHPUT=10
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : iperf UL -- EPC is server and UE is client"
echo "############################################################"
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_ul
THROUGHPUT=2
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
generic_iperf $EPC_VM_CMDS $EPC_VM_IP_ADDR $REAL_EPC_IP_ADDR $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$EPC_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
else
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
get_enb_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl
get_ue_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
THROUGHPUT=4
THROUGHPUT=10
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
......@@ -1852,6 +1939,67 @@ function run_test_on_vm {
done
done
####################
## MSMS CASE noS1 ##
####################
CONF_FILE=lte-fdd-mbms-basic-sim.conf
CN_CONFIG="noS1"
S1_NOS1_CFG=0
LTEBOX=0
TMODE="fdd"
FREQUENCY=2680
BW_CASES=(05)
for BW in ${BW_CASES[@]}
do
if [[ $BW =~ .*05.* ]]; then PRB=25; fi
if [[ $BW =~ .*10.* ]]; then PRB=50; fi
if [[ $BW =~ .*20.* ]]; then PRB=100; fi
echo "############################################################"
echo "${CN_CONFIG} : Starting the eNB with MSMS in ${TMODE}-${BW}MHz mode"
echo "############################################################"
CURRENT_ENB_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_enb_mbms.log
start_rf_sim_enb $ENB_VM_CMDS "$ENB_VM_IP_ADDR" "$EPC_VM_IP_ADDR" $CURRENT_ENB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG
echo "############################################################"
echo "${CN_CONFIG} : Starting the UE"
echo "############################################################"
CURRENT_UE_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_ue_mbms.log
start_rf_sim_ue $UE_VM_CMDS $UE_VM_IP_ADDR $ENB_VM_IP_ADDR $CURRENT_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
if [ $UE_SYNC -eq 0 ]
then
echo "Problem w/ eNB and UE not syncing"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
STATUS=-1
break
fi
echo "############################################################"
echo "${CN_CONFIG} : iperf DL -- UE is server and eNB is client"
echo "############################################################"
get_enb_mbms_noS1_ip_addr $ENB_VM_CMDS $ENB_VM_IP_ADDR
IPERF_LOG_FILE=${TMODE}_${BW}MHz_${CN_CONFIG}_iperf_dl_mbms
get_ue_mbms_ip_addr $UE_VM_CMDS $UE_VM_IP_ADDR 1
THROUGHPUT=2
generic_iperf $UE_VM_CMDS $UE_VM_IP_ADDR $UE_IP_ADDR $ENB_VM_CMDS $ENB_VM_IP_ADDR $ENB_IP_ADDR $THROUGHPUT $IPERF_LOG_FILE 1 0
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_server.txt $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/${IPERF_LOG_FILE}_client.txt $ARCHIVES_LOC
#check_iperf $ARCHIVES_LOC/$IPERF_LOG_FILE $THROUGHPUT
echo "############################################################"
echo "${CN_CONFIG} : Terminate enb/ue simulators"
echo "############################################################"
terminate_enb_ue_basic_sim $ENB_VM_CMDS $ENB_VM_IP_ADDR 1
terminate_enb_ue_basic_sim $UE_VM_CMDS $UE_VM_IP_ADDR 2
scp -o StrictHostKeyChecking=no ubuntu@$ENB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_ENB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_UE_LOG_FILE $ARCHIVES_LOC
done
full_l2_sim_destroy
echo "############################################################"
......@@ -1862,21 +2010,19 @@ function run_test_on_vm {
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
echo "LTE RFSIM seems OK"
echo "LTE: TEST_OK" > $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
echo "LTE RFSIM seems to FAIL"
echo "LTE: TEST_KO" > $ARCHIVES_LOC/test_final_status.log
fi
fi
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
NR_STATUS=0
PING_STATUS=0
IPERF_STATUS=0
if [ -d $ARCHIVES_LOC ]
then
rm -Rf $ARCHIVES_LOC
fi
mkdir --parents $ARCHIVES_LOC
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
......@@ -1904,7 +2050,8 @@ function run_test_on_vm {
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
echo "5G-NR RFSIM seems to FAIL"
echo "5G-NR: TEST_KO" >> $ARCHIVES_LOC/test_final_status.log
STATUS=-1
return
fi
......@@ -1936,13 +2083,16 @@ function run_test_on_vm {
echo "Checking run status"
echo "############################################################"
if [ $PING_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then STATUS=-1; fi
if [ $STATUS -eq 0 ]
if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $IPERF_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $NR_STATUS -eq 0 ]
then
echo "TEST_OK" > $ARCHIVES_LOC/test_final_status.log
echo "5G-NR RFSIM seems OK"
echo "5G-NR: TEST_OK" >> $ARCHIVES_LOC/test_final_status.log
else
echo "TEST_KO" > $ARCHIVES_LOC/test_final_status.log
echo "5G-NR RFSIM seems to FAIL"
echo "5G-NR: TEST_KO" >> $ARCHIVES_LOC/test_final_status.log
STATUS=-1
fi
fi
......
openair2/RRC/NAS/nas_config.c
View file @ b85731f4
......@@ -260,7 +260,7 @@ int nas_config_mbms(int interface_id, int thirdOctet, int fourthOctet, char *ifn
bringInterfaceUp(interfaceName, 1);
if(!returnValue)
LOG_I(OIP,"Interface %s successfuly configured, ip address %s, mask %s broadcast address %s\n",
LOG_I(OIP,"Interface %s successfully configured, ip address %s, mask %s broadcast address %s\n",
interfaceName, ipAddress, netMask, broadcastAddress);
else
LOG_E(OIP,"Interface %s couldn't be configured (ip address %s, mask %s broadcast address %s)\n",
......@@ -301,7 +301,7 @@ int nas_config_mbms_s1(int interface_id, int thirdOctet, int fourthOctet, char *
printf("returnValue %d\n",returnValue);
if(!returnValue)
LOG_I(OIP,"Interface %s successfuly configured, ip address %s, mask %s broadcast address %s\n",
LOG_I(OIP,"Interface %s successfully configured, ip address %s, mask %s broadcast address %s\n",
interfaceName, ipAddress, "255.255.255.0", broadcastAddress);
else
LOG_E(OIP,"Interface %s couldn't be configured (ip address %s, mask %s broadcast address %s)\n",
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment