Skip to content

O
OpenXG-RAN
Commit 0217cd50 authored by luis_pereira87's avatar luis_pereira87
Browse files
Options

Update in documentation

parent 270c540c
Hide whitespace changes
Inline Side-by-side
Showing with 19 additions and 368 deletions
.vscode/launch.json
View file @ 0217cd50
......@@ -4,7 +4,6 @@
// For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
"version": "0.2.0",
"configurations": [
{
"name": "(gdb) Launch",
"type": "cppdbg",
......
doc/FEATURE_SET.md
View file @ 0217cd50
......@@ -332,6 +332,9 @@ The following features are valid for the gNB and the 5G-NR UE.
- evalution of RSRP report
- evaluation of CQI report
- MAC scheduling of SR reception
- Bandwidth part (BWP) operation
- Handle multiple dedicated BWPs
- BWP switching through RRCReconfiguration method
**gNB RLC**
- Send/Receive operations according to 38.322 Rel.16
......@@ -493,6 +496,8 @@ The following features are valid for the gNB and the 5G-NR UE.
- Configuration of fapi PDU according to DCI
* Scheduler procedures for SRS transmission
- Periodic SRS transmission
* Bandwidth part (BWP) operation
- Operation in configured dedicated BWP through RRCSetup or RRCReconfiguration
**UE RLC**
......
doc/RUN_NR_multiple_BWPs.md
View file @ 0217cd50
......@@ -9,9 +9,9 @@
## Bandwidth part (BWP) ##
Bandwidth Part (BWP) is a set of contiguous Resource Blocks in the resource grid.
Parameters of a Bandwidth Part are communicated to UE using RRC parameters: BWP-Downlink and BWP-Uplink.
Parameters of a BWP are communicated to UE using RRC parameters: BWP-Downlink and BWP-Uplink.
A UE can be configured with a set of 4 BWPs in uplink (UL) and downlink (DL) direction. But only 1 BWP can be active in UL and DL direction at a given time.
A UE can be configured with a set of 4 BWPs in uplink (UL) and downlink (DL) direction (3GPP TS 38.331 Annex B.2 Description of BWP configuration options). But only 1 BWP can be active in UL and DL direction at a given time.
# Procedure to run multiple dedicated BWPs #
......@@ -21,36 +21,31 @@ To configure multiple BWPs, add the following parameters to the gNB configuratio
## Setup of the Configuration files ##
```
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
firstActiveUplinkBWP-Id = 1; #BWP-Id
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
firstActiveUplinkBWP-Id = 1; #BWP-Id
```
Each dedicated BWP must have:
```
# BWP 1 Configuration
bwp-Id_1 = 1;
bwp1_locationAndBandwidth = 28908; // RBstart=33,L=106
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
bwp1_subcarrierSpacing = 1;
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
```
Find these parameters in this configuration file: "targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.SCD.conf"
### NOTE:
* For changing bandwidth, 'dl_carrierBandwidth' and 'ul_carrierBandwidth' must be modified according
to the bandwidth of the BWP
* Currently only 'firstActiveDownlinkBWP-Id' is used to configure both DL and UL BWPs
Find these parameters in this configuration file: "targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf"
# Testing gNB and UE in RF simulator
## gNB command:
```
sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.SCD.conf --rfsim --phy-test -d
sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --rfsim --sa
```
## UE command:
```
sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --rfsim --phy-test -d
sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --nokrnmod --rfsim --sa --uicc0.imsi 208990000000001
```
\ No newline at end of file
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.SCD.conf deleted 100644 → 0
View file @ 270c540c
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
min_rxtxtime = 6;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP), points to Subcarrier 0 of RB#10 of SSB block
absoluteFrequencySSB = 641032;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106; //when changing BWPs, change this also to the same RBs
#initialDownlinkBWP
#genericParameters
# this is RBstart=33 (Start RB of SSB block),L=24 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6358; #6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0; #12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; # used for (full) DL slot
initialDLBWPmappingType_0 = 0; # 0=typeA,1=typeB
initialDLBWPstartSymbolAndLength_0 = 40; # this is SS=1,L=13
initialDLBWPk0_1 = 0; # used for DL part mixed slot
initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; # this is SS=1,L=5
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106; //when changing BWPs, change this also to the same RBs
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6358;#6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for (full) UL slot
initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13
initialULBWPk2_1 = 6; # used for UL part mixed slot
initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 69; # this is SS=10 L=2
initialULBWPk2_2 = 7; # used for Msg.3 during RA
initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 0x1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25;
}
);
# Dedicated Serving Cell Configuration
servingCellConfigDedicated = ({
# BWP-Downlink
# BWP 1 Configuration
dl_bwp-Id_1 = 1;
dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
dl_bwp-Id_2 = 2;
dl_bwp2_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
dl_bwp-Id_3 = 3;
dl_bwp3_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp3_subcarrierSpacing = 1;
# BWP 4 Configuration
dl_bwp-Id_4 = 4;
dl_bwp4_locationAndBandwidth = 22299; // RBstart=24, L=82
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_bwp4_subcarrierSpacing = 1;
firstActiveDownlinkBWP-Id = 1; #BWP-Id
defaultDownlinkBWP-Id = 1; #BWP-Id
# bwp-InactivityTimer ENUMERATED {ms2, ms3, ms4, ms5, ms6, ms8, ms10, ms20, ms30,
# ms40,ms50, ms60, ms80,ms100, ms200,ms300, ms500,
# ms750, ms1280, ms1920, ms2560, spare10, spare9, spare8,
# spare7, spare6, spare5, spare4, spare3, spare2, spare1 }
# UplinkConfig
# BWP-Uplink
# BWP 1 Configuration
ul_bwp-Id_1 = 1;
ul_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp1_subcarrierSpacing = 1;
# BWP 2 Configuration
ul_bwp-Id_2 = 2;
ul_bwp2_locationAndBandwidth = 6325; // RBstart=0, L=24 (10 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp2_subcarrierSpacing = 1;
# BWP 3 Configuration
ul_bwp-Id_3 = 3;
ul_bwp3_locationAndBandwidth = 13750; // RBstart=0, L=51 (20 MHz BW)
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp3_subcarrierSpacing = 1;
# BWP 4 Configuration
ul_bwp-Id_4 = 4;
ul_bwp4_locationAndBandwidth = 22299; // RBstart=24, L=82
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_bwp4_subcarrierSpacing = 1;
firstActiveUplinkBWP-Id = 1; #BWP-Id
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 50;
eNB_instances = [0];
## beamforming 1x2 matrix: 1 layer x 2 antennas
#bf_weights = [0x00007fff, 0x00007fff];
## beamforming 1x4 matrix: 1 layer x 4 antennas
#bf_weights = [0x00007fff, 0x0000,0x0000, 0x0000];
## beamforming 2x2 matrix:
#bf_weights = [0x00007fff, 0x00000000, 0x00000000, 0x00007fff];
## beamforming 4x4 matrix:
#bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000, 0x00000000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff, 0x0000, 0x0000, 0x0000, 0x0000, 0x00007fff];
sdr_addrs = "addr=192.168.10.2,mgmt_addr=192.168.10.2,second_addr=192.168.20.2";
clock_src = "external";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment