Update in documentation

.vscode/launch.json

@@ -4,7 +4,6 @@
     // For more information, visit: https://go.microsoft.com/fwlink/?linkid=830387
     "version": "0.2.0",
     "configurations": [
-        
         {
             "name": "(gdb) Launch",
             "type": "cppdbg",

doc/FEATURE_SET.md

@@ -332,6 +332,9 @@ The following features are valid for the gNB and the 5G-NR UE.
   - evalution of RSRP report
   - evaluation of CQI report
 - MAC scheduling of SR reception
+- Bandwidth part (BWP) operation
+  - Handle multiple dedicated BWPs
+  - BWP switching through RRCReconfiguration method
 
 **gNB RLC**
 - Send/Receive operations according to 38.322 Rel.16
@@ -493,6 +496,8 @@ The following features are valid for the gNB and the 5G-NR UE.
    - Configuration of fapi PDU according to DCI
 * Scheduler procedures for SRS transmission
    - Periodic SRS transmission
+* Bandwidth part (BWP) operation
+   - Operation in configured dedicated BWP through RRCSetup or RRCReconfiguration
 
 
 **UE RLC**

doc/RUN_NR_multiple_BWPs.md

@@ -9,9 +9,9 @@
 ## Bandwidth part (BWP) ##
 Bandwidth Part (BWP) is a set of contiguous Resource Blocks in the resource grid. 
 
-Parameters of a Bandwidth Part are communicated to UE using RRC parameters: BWP-Downlink and BWP-Uplink. 
+Parameters of a BWP are communicated to UE using RRC parameters: BWP-Downlink and BWP-Uplink. 
 
-A UE can be configured with a set of 4 BWPs in uplink (UL) and downlink (DL) direction. But only 1 BWP can be active in UL and DL direction at a given time.
+A UE can be configured with a set of 4 BWPs in uplink (UL) and downlink (DL) direction (3GPP TS 38.331 Annex B.2 Description of BWP configuration options). But only 1 BWP can be active in UL and DL direction at a given time.
 
 # Procedure to run multiple dedicated BWPs #
 
@@ -29,28 +29,23 @@ To configure multiple BWPs, add the following parameters to the gNB configuratio
 Each dedicated BWP must have:
 ```
     # BWP 1 Configuration
-    bwp-Id_1 = 1; 
-    bwp1_locationAndBandwidth = 28908; // RBstart=33,L=106 
+    dl_bwp-Id_1 = 1;
+    dl_bwp1_locationAndBandwidth = 28875; // RBstart=0, L=106 (40 MHz BW)
     # subcarrierSpacing
     # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
-    bwp1_subcarrierSpacing = 1; 
+    dl_bwp1_subcarrierSpacing = 1;
 ```   
 
- Find these parameters in this configuration file: "targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.SCD.conf"
-
-###  NOTE:  
-    * For changing bandwidth, 'dl_carrierBandwidth' and 'ul_carrierBandwidth' must be modified according 
-      to the bandwidth of the BWP
-    * Currently only 'firstActiveDownlinkBWP-Id' is used to configure both DL and UL BWPs
+ Find these parameters in this configuration file: "targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf"
      
 # Testing gNB and UE in RF simulator
 
 ## gNB command:
 ```
-    sudo RFSIMULATOR=server ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpn300.SCD.conf --rfsim --phy-test -d
+    sudo ./nr-softmodem -O ../../../targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf --gNBs.[0].min_rxtxtime 6 --rfsim --sa
 ```
 
 ## UE command:
 ```
-    sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --rfsim --phy-test -d
+    sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem -r 106 --numerology 1 --band 78 -C 3619200000 --nokrnmod --rfsim --sa --uicc0.imsi 208990000000001
 ```
\ No newline at end of file