Skip to content

O
OpenXG-RAN
Commit 082dff13 authored by navid's avatar navid
Browse files
Options

* add RF interface to the rrh gateway 

* update the openair0_init for all targets
* add a tuning function for the ethernet



git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7830 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 471efb41
Hide whitespace changes
Inline Side-by-side
Showing with 1250 additions and 1071 deletions
cmake_targets/CMakeLists.txt
View file @ 082dff13
......@@ -392,7 +392,7 @@ elseif (${RF_BOARD} STREQUAL "ETHERNET")
set(HW_SOURCE ${HW_SOURCE}
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
)
set(LOWLATENCY False)
set(LOWLATENCY True)
elseif (${RF_BOARD} STREQUAL "CPRIGW")
set(HW_SOURCE ${HW_SOURCE}
......@@ -1558,6 +1558,7 @@ add_executable(lte-softmodem
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIRCN_DIR}/NAS/UE/nas_ue_task.c
${GTPU_need_ITTI}
......@@ -1591,6 +1592,7 @@ add_executable(lte-softmodem-nos1
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/SIMU/USER/init_lte.c
${OPENAIR_TARGETS}/COMMON/create_tasks.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
#${OPENAIR2_DIR}/RRC/NAS/nas_config.c # enable if you want rrc to mount ip interface
#${OPENAIR2_DIR}/RRC/NAS/rb_config.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
......@@ -1725,7 +1727,8 @@ add_executable(rrh_gw
${OPENAIR_TARGETS}/RT/USER/rrh_gw.c
${OPENAIR_TARGETS}/RT/USER/eNB_transport_IQ.c
${OPENAIR_TARGETS}/RT/USER/UE_transport_IQ.c
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/RT/USER/rt_wrapper.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR_TARGETS}/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
${HW_SOURCE}
)
......
openair2/UTIL/LOG/vcd_signal_dumper.c
View file @ 082dff13
......@@ -92,6 +92,8 @@ const char* eurecomVariablesNames[] = {
"diff2",
"hw_subframe",
"hw_frame",
"hw_subframe_rx",
"hw_frame_rx",
"txcnt",
"rxcnt",
"trx_ts",
......@@ -103,6 +105,8 @@ const char* eurecomVariablesNames[] = {
"hw_cnt_tx",
"lhw_cnt_tx",
"pck_rx",
"pck_tx",
"cnt",
"dummy_dump",
"itti_send_msg",
"itti_poll_msg",
......@@ -150,6 +154,8 @@ const char* eurecomFunctionsNames[] = {
"eNB_rx_sleep",
"eNB_tx_sleep",
"eNB_proc_sleep",
"trx_read_rf",
"trx_write_rf",
/* PHY signals */
"ue_synch",
......
openair2/UTIL/LOG/vcd_signal_dumper.h
View file @ 082dff13
......@@ -64,6 +64,8 @@ typedef enum {
VCD_SIGNAL_DUMPER_VARIABLES_DIFF,
VCD_SIGNAL_DUMPER_VARIABLES_HW_SUBFRAME,
VCD_SIGNAL_DUMPER_VARIABLES_HW_FRAME,
VCD_SIGNAL_DUMPER_VARIABLES_HW_SUBFRAME_RX,
VCD_SIGNAL_DUMPER_VARIABLES_HW_FRAME_RX,
VCD_SIGNAL_DUMPER_VARIABLES_TXCNT,
VCD_SIGNAL_DUMPER_VARIABLES_RXCNT,
VCD_SIGNAL_DUMPER_VARIABLES_TRX_TS,
......@@ -75,6 +77,8 @@ typedef enum {
VCD_SIGNAL_DUMPER_VARIABLES_TX_HWCNT,
VCD_SIGNAL_DUMPER_VARIABLES_TX_LHWCNT,
VCD_SIGNAL_DUMPER_VARIABLES_RX_PCK,
VCD_SIGNAL_DUMPER_VARIABLES_TX_PCK,
VCD_SIGNAL_DUMPER_VARIABLES_CNT,
VCD_SIGNAL_DUMPER_VARIABLES_DUMMY_DUMP,
VCD_SIGNAL_DUMPER_VARIABLE_ITTI_SEND_MSG,
VCD_SIGNAL_DUMPER_VARIABLE_ITTI_POLL_MSG,
......@@ -116,8 +120,7 @@ typedef enum {
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_THREAD_TX,
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_THREAD_RX,
/* RRH signals */
/* RRH signals */
VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX,
VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX,
VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TRX,
......@@ -125,6 +128,8 @@ typedef enum {
VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX_SLEEP,
VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX_SLEEP,
VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_PROC_SLEEP,
VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ_RF,
VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE_RF,
/* PHY signals */
VCD_SIGNAL_DUMPER_FUNCTIONS_UE_SYNCH,
......
targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
View file @ 082dff13
......@@ -185,7 +185,7 @@ int trx_brf_set_gains(openair0_device* device) {
}
int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg) {
int status;
int card=0;
......
targets/ARCH/COMMON/common_lib.c 0 → 100644
View file @ 082dff13
/*******************************************************************************
OpenAirInterface
Copyright(c) 1999 - 2014 Eurecom
OpenAirInterface is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenAirInterface is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OpenAirInterface.The full GNU General Public License is
included in this distribution in the file called "COPYING". If not,
see <http://www.gnu.org/licenses/>.
Contact Information
OpenAirInterface Admin: openair_admin@eurecom.fr
OpenAirInterface Tech : openair_tech@eurecom.fr
OpenAirInterface Dev : openair4g-devel@eurecom.fr
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
/*! \file common_lib.c
* \brief common APIs for different RF frontend device
* \author HongliangXU, Navid Nikaein
* \date 2015
* \version 0.2
* \company Eurecom
* \maintainer: navid.nikaein@eurecom.fr
* \note
* \warning
*/
#include <stdio.h>
#include "common_lib.h"
int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
#ifdef ETHERNET
device->type=ETH_IF;
device->func_type = BBU_FUNC;
openair0_dev_init_eth(device, openair0_cfg);
printf(" openair0_dev_init_eth ...\n");
#elif EXMIMO
device->type=EXMIMO_IF;
openair0_dev_init_exmimo(device, openair0_cfg);
printf("openair0_dev_init_exmimo...\n");
#elif OAI_USRP
device->type=USRP_IF;
openair0_dev_init_usrp(device, openair0_cfg);
printf("openair0_dev_init_usrp ...\n");
#elif OAI_BLADERF
device->type=BLADERF_IF;
openair0_dev_init_bladerf(device, openair0_cfg);
printf(" openair0_dev_init_bladerf ...\n");
#endif
}
targets/ARCH/COMMON/common_lib.h
View file @ 082dff13
......@@ -134,7 +134,13 @@ typedef struct {
/*!\brief device type */
/*!\brief interface types that apply to modules (RRH_BBU/RRH_UE) created in RRH (rrh_gw.c)
and are defined with respect to the RF device that is present in RRH
-RRH_BBU modules have two devices, one is by default ETHERNET (will have ETH_IF) and the other one is a
RF device (EXMIMO,USRP,BLADERF) or no device (NONE_IF).
-RRH_UE modules have two devices one is by default ETHERNET (will have ETH_IF)
and the other one by default not present so it will have NONE_IF
*/
typedef enum {
MIN_DEV_TYPE = 0,
/*!\brief device is ETH */
......@@ -152,10 +158,10 @@ typedef enum {
} dev_type_t;
/*!\brief type */
/*!\brief openair0 device host type */
typedef enum {
MIN_FUNC_TYPE = 0,
/*!\brief device functions within a BBU */
/*!\brief device functions within a BBU */
BBU_FUNC,
/*!\brief device functions within a RRH */
RRH_FUNC,
......@@ -264,23 +270,20 @@ extern "C"
#endif
/*! \brief Initialize Openair RF target. It returns 0 if OK */
int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg);
//int openair0_stop(int card);
//ETHERNET
/*! \brief Initialize Openair ETHERNET target. It returns 0 if OK */
int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg);
//int openair0_stop_eth(int card);
//int openair0_set_gains_eth(openair0_device* device, openair0_config_t *openair0_cfg);
//int openair0_set_frequencies_eth(openair0_device* device, openair0_config_t *openair0_cfg,int exmimo_dump_config);
//USPRP
int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg);
//USRP
/*! \brief Get the current timestamp of USRP */
openair0_timestamp get_usrp_time(openair0_device *device);
openair0_timestamp get_usrp_time(openair0_device *device);
/*! \brief Set the RX frequency of USRP RF TARGET */
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg);
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg);
//extern
/*! \brief Initialize Openair ETHERNET target. It returns 0 if OK */
int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg);
int openair0_dev_init_bladerf(openair0_device *device, openair0_config_t *openair0_cfg);
int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg);
int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg);
/*@}*/
#ifdef __cplusplus
......
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
View file @ 082dff13
......@@ -26,7 +26,7 @@
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
/*! \fileethernet_lib.c
/*! \file ethernet_lib.c
* \brief API to stream I/Q samples over standard ethernet
* \author Katerina Trilyraki, Navid Nikaein, Pedro Dinis, Lucio Ferreira, Raymond Knopp
* \date 2015
......@@ -52,132 +52,208 @@
#include "common_lib.h"
#include "ethernet_lib.h"
//#define DEBUG 1
int num_devices_eth = 0;
int dest_addr_len[MAX_INST];
char sendbuf[MAX_INST][BUF_SIZ]; /*TODO*/
/* Initialization of UDP Socket to communicate with one destination */
int ethernet_socket_init(openair0_device *device) {
int i = 0;
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
/*! \fn static int eth_socket_init(openair0_device *device)
* \brief initialization of UDP Socket to communicate with one destination
* \param[in] *device openair device for which the socket will be created
* \param[out]
* \return 0 on success, otherwise -1
* \note
* @ingroup _oai
*/
static int eth_socket_init(openair0_device *device);
/*! \fn static int eth_set_dev_conf(openair0_device *device)
* \brief
* \param[in] *device openair device
* \param[out]
* \return 0 on success, otherwise -1
* \note
* @ingroup _oai
*/
static int eth_set_dev_conf(openair0_device *device);
/*! \fn static int eth_get_dev_conf(openair0_device *device)
* \brief
* \param[in] *device openair device
* \param[out]
* \return 0 on success, otherwise -1
* \note
* @ingroup _oai
*/
static int eth_get_dev_conf(openair0_device *device);
int trx_eth_start(openair0_device *device) {
// struct sockaddr_in *dest = &dest_addr[Mod_id];
char str[INET_ADDRSTRLEN];
const char *dest_ip;
int dest_port;
/* initialize socket */
if (eth_socket_init(device)!=0) {
return -1;
}
if (device->func_type == RRH_FUNC ){
dest_ip = device->openair0_cfg.my_ip;
dest_port = device->openair0_cfg.my_port;
printf("[RRH] ip addr %s port %d\n",dest_ip, dest_port);
/* RRH gets openair0 device configuration BBU sets openair0 device configuration*/
if (device->func_type == BBU_FUNC) {
return eth_set_dev_conf(device);
} else {
dest_ip = device->openair0_cfg.remote_ip;
dest_port = device->openair0_cfg.remote_port;
printf("[BBU] ip addr %s port %d\n",dest_ip, dest_port);
return eth_get_dev_conf(device);
}
return 0;
}
int trx_eth_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int cc, int flags) {
int n_written=0,i;
uint16_t header_size=sizeof(int32_t) + sizeof(openair0_timestamp);
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
int sendto_flag =0;
sendto_flag|=MSG_DONTWAIT;
for (i=0;i<cc;i++) {
/* buff[i] points to the position in tx buffer where the payload to be sent is
buff2 points to the position in tx buffer where the packet header will be placed */
void *buff2 = (void*)(buff[i]-header_size);
/* Open RAW socket to send on */
if ((eth->sockfd[Mod_id] = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) == -1) {
perror("ETHERNET: Error opening socket");
exit(0);
/* we don't want to ovewrite with the header info the previous tx buffer data so we store it*/
int32_t temp0 = *(int32_t *)buff2;
openair0_timestamp temp1 = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
n_written = 0;
*(int16_t *)(buff2 + sizeof(int16_t))=1+(i<<1);
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = timestamp;
/* printf("[RRH]write mod_%d %d , len %d, buff %p antenna %d\n",
Mod_id,eth->sockfd[Mod_id],(nsamps<<2)+header_size, buff2, antenna_id);*/
while(n_written < nsamps) {
/* Send packet */
if ((n_written += sendto(eth->sockfd[Mod_id],
buff2,
(nsamps<<2)+header_size,
0,
(struct sockaddr*)&eth->dest_addr[Mod_id],
dest_addr_len[Mod_id])) < 0) {
perror("ETHERNET WRITE");
exit(-1);
}
}
#if DEBUG
printf("Buffer head TX: nu=%d an_id=%d ts%d samples_send=%d i=%d data=%x\n",
*(int16_t *)buff2,
*(int16_t *)(buff2 + sizeof(int16_t)),
*(openair0_timestamp *)(buff2 + sizeof(int32_t)),
n_written>>2,i,*(int32_t *)(buff2 + 20*sizeof(int32_t)));
#endif
/* tx buffer values restored */
*(int32_t *)buff2 = temp0;
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = temp1;
}
return n_written;
}
/* initialize destination address */
for (i=0; i< MAX_INST; i++)
bzero((void *)&(eth->dest_addr[i]), sizeof(eth->dest_addr[i]));
int trx_eth_read(openair0_device *device, openair0_timestamp *timestamp, void **buff, int nsamps, int cc) {
// bzero((void *)dest,sizeof(struct sockaddr_in));
eth->dest_addr[Mod_id].sin_family = AF_INET;
inet_pton(AF_INET,dest_ip,&(eth->dest_addr[Mod_id].sin_addr.s_addr));
eth->dest_addr[Mod_id].sin_port=htons(dest_port);
dest_addr_len[Mod_id] = sizeof(struct sockaddr_in);
inet_ntop(AF_INET, &(eth->dest_addr[Mod_id].sin_addr), str, INET_ADDRSTRLEN);
int bytes_received=0;
int block_cnt=0;
int ret=0,i;
uint16_t header_size=sizeof(int32_t) + sizeof(openair0_timestamp);
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
/* if RRH, then I am the server, so bind */
if (device->func_type == RRH_FUNC ){
if (bind(eth->sockfd[Mod_id],(struct sockaddr *)&eth->dest_addr[Mod_id], dest_addr_len[Mod_id])<0) {
perror("ETHERNET: Cannot bind to socket");
exit(0);
}else {
printf("[RRH] binding mod_%d to %s:%d\n",Mod_id,str,ntohs(eth->dest_addr[Mod_id].sin_port));
for (i=0;i<cc;i++) {
/* buff[i] points to the position in rx buffer where the payload to be received will be placed
buff2 points to the position in rx buffer where the packet header will be placed */
void *buff2 = (void*)(buff[i]-header_size);
/* we don't want to ovewrite with the header info the previous rx buffer data so we store it*/
int32_t temp0 = *(int32_t *)buff2;
openair0_timestamp temp1 = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
bytes_received=0;
block_cnt=0;
ret=0;
/* printf("[RRH] read mod_%d %d,len %d, buff %p antenna %d\n",
Mod_id,eth->sockfd[Mod_id],(nsamps<<2)+header_size, buff2, antenna_id);*/
while(bytes_received < (int)((nsamps<<2))) {
ret=recvfrom(eth->sockfd[Mod_id],
buff2+bytes_received,
(nsamps<<2)+header_size-bytes_received,
0,//MSG_DONTWAIT,
(struct sockaddr *)&eth->dest_addr[Mod_id],
(socklen_t *)&dest_addr_len[Mod_id]);
if (ret==-1) {
if (errno == EAGAIN) {
perror("ETHERNET READ: ");
return((nsamps<<2) + header_size);
} else if (errno == EWOULDBLOCK) {
block_cnt++;
usleep(10);
if (block_cnt == 100) return(-1);
}
} else {
bytes_received+=ret;
}
}
#if DEBUG
printf("Buffer head RX: nu=%d an_id=%d ts%d samples_recv=%d i=%d data=%x\n",
*(int16_t *)buff2,
*(int16_t *)(buff2 + sizeof(int16_t)),
*(openair0_timestamp *)(buff2 + sizeof(int32_t)),
ret>>2,i,*(int32_t *)(buff2 + 20*sizeof(int32_t)));
#endif
/* store the timestamp value from packet's header */
*timestamp = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
}else {
printf("[BBU] Connecting to %s:%d\n",str,ntohs(eth->dest_addr[Mod_id].sin_port));
/* tx buffer values restored */
*(int32_t *)buff2 = temp0;
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = temp1;
}
return nsamps;
return 0;
}
void ethernet_socket_opt (openair0_device *device){
void trx_eth_end(openair0_device *device) {
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id=device->Mod_id;
int sndbuf_size=0, rcvbuf_size=0;
socklen_t optlen;
/* chang the MTU of the eth interface */
struct ifreq ifr;
optlen = sizeof(int);
if (getsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_SNDBUF,
&sndbuf_size,&optlen))
printf("error:getsockopt()\n");
if (getsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_RCVBUF,
&rcvbuf_size,&optlen))
printf("error:getsockopt()\n");
printf( "sndbuf_size= %d bytes rcvbuf_size= %d bytes\n", sndbuf_size,
rcvbuf_size);
ifr.ifr_addr.sa_family = AF_INET;
//iap->ifa_name is bond1:xx
strncpy(ifr.ifr_name, DEFAULT_IF, sizeof(ifr.ifr_name));
ifr.ifr_mtu = device->openair0_cfg.samples_per_packet*5;
if (ioctl(eth->sockfd[Mod_id], SIOCSIFMTU, (caddr_t)&ifr) < 0 )
perror ("Can't set the MTU");
else
printf("[ETHERNET] %s MTU size has changed to %d\n",DEFAULT_IF,ifr.ifr_mtu);
int Mod_id = device->Mod_id;
/*destroys socket only for the processes that call the eth_end fuction-- shutdown() for beaking the pipe */
if ( close(eth->sockfd[Mod_id]) <0 ) {
perror("ETHERNET: Failed to close socket");
exit(0);
} else {
printf("[RRH] socket for mod_id %d has been successfully closed.\n",Mod_id);
}
}
int trx_eth_set_dev_conf(openair0_device *device) {
int trx_eth_request(openair0_device *device, void *msg, ssize_t msg_len) {
int Mod_id = device->Mod_id;
eth_state_t *eth = (eth_state_t*)device->priv;
void *msg;
ssize_t msg_len;
/* send to RRH (server) required configuration parameters:
-number of downlink RBs (so that frame/packet size can be set accordingly)
-rx_num_0channels
-tx_num_channels
-rx_freq
-tx_freq
-rxg_mode[4]
-rx_gain
-tx_gain
-rx_bw
-tx_bw
-autocal */
msg=malloc(sizeof(openair0_config_t));
msg_len=sizeof(openair0_config_t);
memcpy(msg,(void*)&device->openair0_cfg,msg_len);
if (sendto(eth->sockfd[Mod_id],msg,msg_len,0,(struct sockaddr *)&eth->dest_addr[Mod_id],dest_addr_len[Mod_id])==-1){
/* BBU sends a message to RRH */
if (sendto(eth->sockfd[Mod_id],msg,msg_len,0,(struct sockaddr *)&eth->dest_addr[Mod_id],dest_addr_len[Mod_id])==-1) {
perror("ETHERNET: ");
exit(0);
}
......@@ -187,44 +263,43 @@ int trx_eth_set_dev_conf(openair0_device *device) {
int trx_eth_get_dev_conf(openair0_device *device) {
int trx_eth_reply(openair0_device *device, void *msg, ssize_t msg_len) {
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
char str[INET_ADDRSTRLEN];
void *msg;
ssize_t msg_len;
msg=malloc(sizeof(openair0_config_t));
msg_len=sizeof(openair0_config_t);
/* receive from client (lte-softmodem) */
/* RRH receives from BBU a message */
if (recvfrom(eth->sockfd[Mod_id],
msg,
msg_len,
0,
(struct sockaddr *)&eth->dest_addr[Mod_id],
(socklen_t *)&dest_addr_len[Mod_id])==-1){
(socklen_t *)&dest_addr_len[Mod_id])==-1) {
perror("ETHERNET: ");
exit(0);
}
memcpy((void*)&device->openair0_cfg,msg,msg_len);
inet_ntop(AF_INET, &(eth->dest_addr[Mod_id].sin_addr), str, INET_ADDRSTRLEN);
device->openair0_cfg.remote_port =ntohs(eth->dest_addr[Mod_id].sin_port);
device->openair0_cfg.remote_ip=str;
//ethernet_socket_opt (device);
// printf("[RRH] write mod_%d %d to %s:%d\n",Mod_id,eth->sockfd[Mod_id],str,ntohs(eth->dest_addr[Mod_id].sin_port));
}
return 0;
}
int trx_eth_request(openair0_device *device, void *msg, ssize_t msg_len) {
static int eth_set_dev_conf(openair0_device *device) {
int Mod_id = device->Mod_id;
eth_state_t *eth = (eth_state_t*)device->priv;
if (sendto(eth->sockfd[Mod_id],msg,msg_len,0,(struct sockaddr *)&eth->dest_addr[Mod_id],dest_addr_len[Mod_id])==-1){
void *msg;
ssize_t msg_len;
/* a BBU client sents to RRH a set of configuration parameters (openair0_config_t)
so that RF front end is configured appropriately and
frame/packet size etc. can be set */
msg=malloc(sizeof(openair0_config_t));
msg_len=sizeof(openair0_config_t);
memcpy(msg,(void*)&device->openair0_cfg,msg_len);
if (sendto(eth->sockfd[Mod_id],msg,msg_len,0,(struct sockaddr *)&eth->dest_addr[Mod_id],dest_addr_len[Mod_id])==-1) {
perror("ETHERNET: ");
exit(0);
}
......@@ -233,169 +308,40 @@ int trx_eth_request(openair0_device *device, void *msg, ssize_t msg_len) {
}
int trx_eth_reply(openair0_device *device, void *msg, ssize_t msg_len) {
static int eth_get_dev_conf(openair0_device *device) {
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
char str[INET_ADDRSTRLEN];
void *msg;
ssize_t msg_len;
msg=malloc(sizeof(openair0_config_t));
msg_len=sizeof(openair0_config_t);
/* receive from client (lte-softmodem) */
/* RRH receives from BBU openair0_config_t */
if (recvfrom(eth->sockfd[Mod_id],
msg,
msg_len,
0,
(struct sockaddr *)&eth->dest_addr[Mod_id],
(socklen_t *)&dest_addr_len[Mod_id])==-1){
(socklen_t *)&dest_addr_len[Mod_id])==-1) {
perror("ETHERNET: ");
exit(0);
}
return 0;
}
int ethernet_write_data(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int antenna_id) {
int n_written;
uint16_t header_size=sizeof(int32_t) + sizeof(openair0_timestamp);
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
int sendto_flag =0;
sendto_flag|=MSG_DONTWAIT;
/* buff[antenna_id] points to the position in tx buffer where the payload to be sent is
buff2 points to the position in tx buffer where the packet header will be placed */
void *buff2 = (void*)(buff[antenna_id]-header_size); // (void*)((unsigned char *)buff[antenna_id]-header_size);
/* we don't want to ovewrite with the header info the previous tx buffer data so we store it*/
int32_t temp0 = *(int32_t *)buff2;
openair0_timestamp temp1 = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
n_written = 0;
*(int16_t *)(buff2 + sizeof(int16_t))=1+(antenna_id<<1);
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = timestamp;
/* printf("[RRH]write mod_%d %d , len %d, buff %p antenna %d\n",
Mod_id,eth->sockfd[Mod_id],(nsamps<<2)+header_size, buff2, antenna_id);*/
while(n_written < nsamps) {
/* Send packet */
if ((n_written += sendto(eth->sockfd[Mod_id],
buff2,
(nsamps<<2)+header_size,
0,
(struct sockaddr*)&eth->dest_addr[Mod_id],
dest_addr_len[Mod_id])) < 0) {
perror("ETHERNET WRITE");
exit(-1);
}
}
/* printf("Buffer head TX: nu=%d an_id=%d ts%d byte_send=%d \n", *(int16_t *)buff2,
*(int16_t *)(buff2 + sizeof(int16_t)),
*(openair0_timestamp *)(buff2 + sizeof(int32_t)),
n_written>>2);*/
/* tx buffer values restored */
*(int32_t *)buff2 = temp0;
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = temp1;
return n_written;
}
int ethernet_read_data(openair0_device *device,openair0_timestamp *timestamp,void **buff, int nsamps,int antenna_id) {
int bytes_received;
int block_cnt;
int ret;
uint16_t header_size=sizeof(int32_t) + sizeof(openair0_timestamp);
/* buff[antenna_id] points to the position in rx buffer where the payload to be received will be placed
buff2 points to the position in rx buffer where the packet header will be placed */
void *buff2 = (void*)(buff[antenna_id]-header_size);
/* we don't want to ovewrite with the header info the previous rx buffer data so we store it*/
int32_t temp0 = *(int32_t *)buff2;
openair0_timestamp temp1 = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
bytes_received=0;
block_cnt=0;
/* printf("[RRH] read mod_%d %d,len %d, buff %p antenna %d\n",
Mod_id,eth->sockfd[Mod_id],(nsamps<<2)+header_size, buff2, antenna_id);*/
while(bytes_received < (int)((nsamps<<2))) {
ret=recvfrom(eth->sockfd[Mod_id],
buff2+bytes_received,
(nsamps<<2)+header_size-bytes_received,
0,//MSG_DONTWAIT,
(struct sockaddr *)&eth->dest_addr[Mod_id],
(socklen_t *)&dest_addr_len[Mod_id]);
if (ret==-1) {
if (errno == EAGAIN) {
perror("ETHERNET READ: ");
return((nsamps<<2) + header_size);
} else if (errno == EWOULDBLOCK) {
block_cnt++;
usleep(10);
if (block_cnt == 100) return(-1);
}
} else {
bytes_received+=ret;
}
}
/*
printf("Buffer head RX: nu=%d an_id=%d ts%d byte_recv=%d\n", *(int16_t *)buff2,
*(int16_t *)(buff2 + sizeof(int16_t)),
*(openair0_timestamp *)(buff2 + sizeof(int32_t)),
ret>>2);*/
/* store the timestamp value from packet's header */
*timestamp = *(openair0_timestamp *)(buff2 + sizeof(int32_t));
/* tx buffer values restored */
*(int32_t *)buff2 = temp0;
*(openair0_timestamp *)(buff2 + sizeof(int32_t)) = temp1;
// printf("Received %d samples, timestamp = %d\n",bytes_received>>2,*(int32_t*)timestamp);
return nsamps;
}
memcpy((void*)&device->openair0_cfg,msg,msg_len);
inet_ntop(AF_INET, &(eth->dest_addr[Mod_id].sin_addr), str, INET_ADDRSTRLEN);
device->openair0_cfg.remote_port =ntohs(eth->dest_addr[Mod_id].sin_port);
device->openair0_cfg.remote_ip=str;
/*apply additional configuration*/
//ethernet_tune (device, RING_PAR);
// printf("[RRH] write mod_%d %d to %s:%d\n",Mod_id,eth->sockfd[Mod_id],str,ntohs(eth->dest_addr[Mod_id].sin_port));
int trx_eth_start(openair0_device *device){
if (ethernet_socket_init(device)!=0) {
return -1;
}
if (device->func_type == BBU_FUNC ) {
return trx_eth_set_dev_conf(device);
}
else{
return trx_eth_get_dev_conf(device);
}
return(0);
return 0;
}
int trx_eth_write(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps, int antenna_id, int flags) {
return ethernet_write_data(device,timestamp,buff,nsamps,antenna_id);
}
int trx_eth_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int antenna_id) {
return(ethernet_read_data(device,ptimestamp,buff,nsamps,antenna_id));
}
int trx_eth_stop(int card) {
return(0);
......@@ -409,48 +355,173 @@ int trx_eth_set_gains(openair0_device* device, openair0_config_t *openair0_cfg)
return(0);
}
int trx_eth_get_stats(openair0_device* device) {
return(0);
}
int trx_eth_reset_stats(openair0_device* device) {
return(0);
}
int openair0_set_gains(openair0_device* device,
openair0_config_t *openair0_cfg) {
return(0);
}
int openair0_set_frequencies(openair0_device* device, openair0_config_t *openair0_cfg, int dummy) {
static int eth_socket_init(openair0_device *device) {
return(0);
}
int i = 0;
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
char str[INET_ADDRSTRLEN];
const char *dest_ip;
int dest_port=0;
if (device->func_type == RRH_FUNC ) {
dest_ip = device->openair0_cfg.my_ip;
dest_port = device->openair0_cfg.my_port;
printf("[RRH] ip addr %s port %d\n",dest_ip, dest_port);
} else {
dest_ip = device->openair0_cfg.remote_ip;
dest_port = device->openair0_cfg.remote_port;
printf("[BBU] ip addr %s port %d\n",dest_ip, dest_port);
}
/* Open RAW socket to send on */
if ((eth->sockfd[Mod_id] = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP)) == -1) {
perror("ETHERNET: Error opening socket");
exit(0);
}
/* initialize destination address */
for (i=0; i< MAX_INST; i++) {
bzero((void *)&(eth->dest_addr[i]), sizeof(eth->dest_addr[i]));
}
// bzero((void *)dest,sizeof(struct sockaddr_in));
eth->dest_addr[Mod_id].sin_family = AF_INET;
inet_pton(AF_INET,dest_ip,&(eth->dest_addr[Mod_id].sin_addr.s_addr));
eth->dest_addr[Mod_id].sin_port=htons(dest_port);
dest_addr_len[Mod_id] = sizeof(struct sockaddr_in);
inet_ntop(AF_INET, &(eth->dest_addr[Mod_id].sin_addr), str, INET_ADDRSTRLEN);
/* if RRH, then I am the server, so bind */
if (device->func_type == RRH_FUNC ) {
if (bind(eth->sockfd[Mod_id],(struct sockaddr *)&eth->dest_addr[Mod_id], dest_addr_len[Mod_id])<0) {
perror("ETHERNET: Cannot bind to socket");
exit(0);
} else {
printf("[RRH] binding mod_%d to %s:%d\n",Mod_id,str,ntohs(eth->dest_addr[Mod_id].sin_port));
}
} else {
printf("[BBU] Connecting to %s:%d\n",str,ntohs(eth->dest_addr[Mod_id].sin_port));
}
return 0;
}
void trx_eth_end(openair0_device *device) {
int ethernet_tune(openair0_device *device , eth_opt_t option) {
eth_state_t *eth = (eth_state_t*)device->priv;
int Mod_id = device->Mod_id;
/*destroys socket only for the processes that call the eth_end fuction-- shutdown() for beaking the pipe */
if ( close(eth->sockfd[Mod_id]) <0 ) {
perror("ETHERNET: Failed to close socket");
exit(0);
}else {
printf("[RRH] socket for mod_id %d has been successfully closed.",Mod_id);
}
int Mod_id=device->Mod_id;
unsigned int sndbuf_size=0, rcvbuf_size=0;
struct timeval snd_timeout, rcv_timeout;
struct ifreq ifr;
char system_cmd[256];
char* if_name=DEFAULT_IF;
/****************** socket level options ************************/
if (option== SND_BUF_SIZE) { /* transmit socket buffer size */
if (setsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_SNDBUF,
&sndbuf_size,sizeof(sndbuf_size))) {
perror("[ETHERNET] setsockopt()");
} else {
printf( "sndbuf_size= %d bytes\n", sndbuf_size);
}
} else if (option== RCV_BUF_SIZE) { /* receive socket buffer size */
if (setsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_RCVBUF,
&rcvbuf_size,sizeof(rcvbuf_size))) {
perror("[ETHERNET] setsockopt()");
} else {
printf( "rcvbuf_size= %d bytes\n", rcvbuf_size);
}
} else if (option==RCV_TIMEOUT) {
rcv_timeout.tv_sec = 0;
rcv_timeout.tv_usec = 180;//less than rt_period
if (setsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_RCVTIMEO,
(char *)&rcv_timeout,sizeof(rcv_timeout))) {
perror("[ETHERNET] setsockopt()");
} else {
printf( "rcv_timeout= %d usecs\n", rcv_timeout.tv_usec);
}
} else if (option==SND_TIMEOUT) {
snd_timeout.tv_sec = 0;
snd_timeout.tv_usec = 180;//less than rt_period
if (setsockopt(eth->sockfd[Mod_id],
SOL_SOCKET,
SO_SNDTIMEO,
(char *)&snd_timeout,sizeof(snd_timeout))) {
perror("[ETHERNET] setsockopt()");
} else {
printf( "snd_timeout= %d usecs\n", snd_timeout.tv_usec);
}
}
/******************* interface level options *************************/
else if (option==MTU_SIZE) { /* change MTU of the eth interface */
ifr.ifr_addr.sa_family = AF_INET;
strncpy(ifr.ifr_name,if_name, sizeof(ifr.ifr_name));
ifr.ifr_mtu =8960;
if (ioctl(eth->sockfd[Mod_id],SIOCSIFMTU,(caddr_t)&ifr) < 0 )
perror ("[ETHERNET] Can't set the MTU");
else
printf("[ETHERNET] %s MTU size has changed to %d\n",DEFAULT_IF,ifr.ifr_mtu);
} else if (option==TX_Q_LEN) { /* change TX queue length of eth interface */
ifr.ifr_addr.sa_family = AF_INET;
strncpy(ifr.ifr_name,if_name, sizeof(ifr.ifr_name));
ifr.ifr_qlen =3000 ;
if (ioctl(eth->sockfd[Mod_id],SIOCSIFTXQLEN,(caddr_t)&ifr) < 0 )
perror ("[ETHERNET] Can't set the txqueuelen");
else
printf("[ETHERNET] %s txqueuelen size has changed to %d\n",DEFAULT_IF,ifr.ifr_qlen);
/******************* device level options *************************/
} else if (option==COALESCE_PAR) {
if (snprintf(system_cmd,sizeof(system_cmd),"ethtool -C %s rx-usecs 3",DEFAULT_IF) > 0) {
system(system_cmd);
printf("[ETHERNET] Coalesce parameters %s\n",system_cmd);
} else {
perror("[ETHERNET] Can't set coalesce parameters\n");
}
} else if (option==PAUSE_PAR ) {
if (snprintf(system_cmd,sizeof(system_cmd),"ethtool -A %s autoneg off rx off tx off",DEFAULT_IF) > 0) {
system(system_cmd);
printf("[ETHERNET] Pause parameters %s\n",system_cmd);
} else {
perror("[ETHERNET] Can't set pause parameters\n");
}
} else if (option==RING_PAR ) {
if (snprintf(system_cmd,sizeof(system_cmd),"ethtool -G %s rx 4096 tx 4096",DEFAULT_IF) > 0) {
system(system_cmd);
printf("[ETHERNET] Ring parameters %s\n",system_cmd);
} else {
perror("[ETHERNET] Can't set ring parameters\n");
}
}
return 0;
}
int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg){
int openair0_dev_init_eth(openair0_device *device, openair0_config_t *openair0_cfg) {
eth_state_t *eth = (eth_state_t*)malloc(sizeof(eth_state_t));
int card = 0;
......
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.h
View file @ 082dff13
......@@ -48,7 +48,7 @@
#include <netinet/ether.h>
#define MAX_INST 4
#define DEFAULT_IF "eth0"
#define DEFAULT_IF "lo"
#define BUF_SIZ 8960 /*Jumbo frame size*/
typedef struct {
......@@ -103,21 +103,51 @@ struct eth_meta_data{
};
/*!\brief packet header */
typedef struct {
/* packet's timestamp */
/*!\brief packet's timestamp */
openair0_timestamp timestamp;
/* variable declared for alignment purposes (sample size=32 bit) */
/*!\brief variable declared for alignment purposes (sample size=32 bit) */
int16_t not_used;
/* antenna port used to resynchronize*/
/*!\brief antenna port used to resynchronize */
int16_t antenna_id;
} header_t;
int ethernet_socket_init(openair0_device *device);
int ethernet_write_data(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int antenna_id);
int ethernet_read_data(openair0_device *device,openair0_timestamp *timestamp,void **buff, int nsamps,int antenna_id);
void ethernet_socket_opt (openair0_device *device);
/*!\brief different options for ethernet tuning in socket and driver level */
typedef enum {
MIN_OPT = 0,
/*!\brief socket send buffer size in bytes */
SND_BUF_SIZE,
/*!\brief socket receive buffer size in bytes */
RCV_BUF_SIZE,
/*!\brief receiving timeout */
RCV_TIMEOUT,
/*!\brief sending timeout */
SND_TIMEOUT,
/*!\brief maximun transmission unit size in bytes */
MTU_SIZE,
/*!\brief TX queue length */
TX_Q_LEN,
/*!\brief RX/TX ring parameters of ethernet device */
RING_PAR,
/*!\brief interruptions coalesence mechanism of ethernet device */
COALESCE_PAR,
/*!\brief pause parameters of ethernet device */
PAUSE_PAR,
MAX_OPT
} eth_opt_t;
/*! \fn int ethernet_tune (openair0_device *device, eth_opt_t option)
* \brief this function allows you to configure certain ethernet parameters in socket or device level
* \param[in] openair0 device which bears the socket
* \param[in] name of parameter to configure
* \return 0 on success, otherwise -1
* \note
* @ingroup _oai
*/
int ethernet_tune (openair0_device *device, eth_opt_t option);
int ethernet_write_data(openair0_device *device, openair0_timestamp timestamp, void **buff, int nsamps,int cc) ;
int ethernet_read_data(openair0_device *device,openair0_timestamp *timestamp,void **buff, int nsamps,int cc);
targets/ARCH/EXMIMO/USERSPACE/LIB/openair0_lib.c
View file @ 082dff13
......@@ -247,7 +247,7 @@ int openair0_stop_without_reset(int card)
#define MY_RF_MODE (RXEN + TXEN + TXLPFNORM + TXLPFEN + TXLPF25 + RXLPFNORM + RXLPFEN + RXLPF25 + LNA1ON +LNAMax + RFBBNORM + DMAMODE_RX + DMAMODE_TX)
#define RF_MODE_BASE (LNA1ON + RFBBNORM)
int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
int openair0_dev_init_exmimo(openair0_device *device, openair0_config_t *openair0_cfg) {
// Initialize card
// exmimo_config_t *p_exmimo_config;
......
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ 082dff13
......@@ -154,7 +154,6 @@ static int trx_usrp_write(openair0_device *device, openair0_timestamp timestamp,
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
{
usrp_state_t *s = (usrp_state_t*)device->priv;
int samples_received=0,i,j;
int nsamps2; // aligned to upper 32 or 16 byte boundary
......@@ -182,31 +181,26 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
// receive a single channel (e.g. from connector RF A)
samples_received = s->rx_stream->recv(buff_tmp[0], nsamps, s->rx_md);
}
// bring RX data into 12 LSBs for softmodem RX
for (int i=0;i<cc;i++) {
for (int j=0; j<nsamps2; j++) {
for (int j=0; j<nsamps2; j++) {
#if defined(__x86_64__) || defined(__i386__)
#ifdef __AVX2__
((__m256i *)buff[i])[j] = _mm256_srai_epi16(buff_tmp[i][j],4);
#else
((__m128i *)buff[i])[j] = _mm_srai_epi16(buff_tmp[i][j],4);
#endif
#elif defined(__arm__)
((int16x8_t*)buff[i])[j] = vshrq_n_s16(buff_tmp[i][j],4);
#endif
}
}
}
if (samples_received < nsamps) {
printf("[recv] received %d samples out of %d\n",samples_received,nsamps);
}
//handle the error code
switch(s->rx_md.error_code){
case uhd::rx_metadata_t::ERROR_CODE_NONE:
......@@ -225,6 +219,7 @@ static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp
s->rx_count += nsamps;
s->rx_timestamp = s->rx_md.time_spec.to_ticks(s->sample_rate);
*ptimestamp = s->rx_timestamp;
return samples_received;
}
......@@ -334,7 +329,7 @@ int trx_usrp_reset_stats(openair0_device* device) {
}
int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cfg)
int openair0_dev_init_usrp(openair0_device* device, openair0_config_t *openair0_cfg)
{
uhd::set_thread_priority_safe(1.0);
usrp_state_t *s = (usrp_state_t*)malloc(sizeof(usrp_state_t));
......@@ -499,6 +494,5 @@ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cf
s->tx_forward_nsamps = 90;
if(is_equal(s->sample_rate, (double)7.68e6))
s->tx_forward_nsamps = 50;
return 0;
}
targets/RT/USER/UE_transport_IQ.c
View file @ 082dff13
......@@ -89,15 +89,8 @@ void *rrh_UE_thread_status;
void *rx_ue[2]; // FIXME hard coded array size; indexed by lte_frame_parms.nb_antennas_rx
void *tx_ue[2]; // FIXME hard coded array size; indexed by lte_frame_parms.nb_antennas_tx
/*! \fn void create_UE_trx_threads( openair0_device *dev_ue, uint8_t RT_flag,uint8_t NRT_flag)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void create_UE_trx_threads( rrh_module_t *dev_ue, uint8_t RT_flag,uint8_t NRT_flag) {
void config_UE_mod( rrh_module_t *dev_ue, uint8_t RT_flag,uint8_t NRT_flag) {
int i;
int error_code_UE, error_code_proc_UE;
......
targets/RT/USER/eNB_transport_IQ.c
View file @ 082dff13
......@@ -28,7 +28,7 @@
*******************************************************************************/
/*! \file eNB_transport_IQ.c
* \brief eNB transport IQ sampels
* \brief eNB transport IQ samples
* \author Katerina Trilyraki, Navid Nikaein, Raymond Knopp
* \date 2015
* \version 0.1
......@@ -53,158 +53,202 @@
#define PRINTF_PERIOD 3750
#define HEADER_SIZE ((sizeof(int32_t) + sizeof(openair0_timestamp))>>2)
//#undef LOWLATENCY
/******************************************************************************
** FUNCTION PROTOTYPES **
******************************************************************************/
void *rrh_eNB_rx_thread(void *);
void *rrh_eNB_tx_thread(void *);
void *rrh_proc_eNB_thread(void *);
void *rrh_eNB_thread(void *);
void set_rt_period( openair0_config_t openair0_cfg);
void check_dev_config( rrh_module_t *mod_enb);
pthread_t main_rrh_eNB_thread;
pthread_attr_t attr, attr_proc;
struct sched_param sched_param_rrh;
pthread_cond_t sync_eNB_cond[4];
pthread_mutex_t sync_eNB_mutex[4];
pthread_mutex_t sync_trx_mutex=PTHREAD_MUTEX_INITIALIZER;
pthread_cond_t sync_trx_cond=PTHREAD_COND_INITIALIZER;
openair0_timestamp nrt_eNB_counter[4]= {0,0,0,0};
int32_t overflow_rx_buffer_eNB[4]= {0,0,0,0};
int32_t nsamps_eNB[4]= {0,0,0,0};
int32_t eNB_tx_started=0,eNB_rx_started=0;
int32_t counter_eNB_rx[4]= {0,0,0,0};
int32_t counter_eNB_tx[4]= {0,0,0,0};
uint8_t RT_flag_eNB,NRT_flag_eNB;
int32_t **tx_buffer_eNB, **rx_buffer_eNB;
void *rrh_eNB_thread_status;
int sync_eNB_rx[4]= {-1,-1,-1,-1};
unsigned int sync_trx=0;
int32_t **tx_buffer_eNB;
int32_t **rx_buffer_eNB;
void **rx_eNB; //was fixed to 2 ant
void **tx_eNB; //was fixed to 2 ant
int sync_eNB_rx[4]= {-1,-1,-1,-1};
openair0_timestamp timestamp_eNB_tx[4]= {0,0,0,0},timestamp_eNB_rx[4]= {0,0,0,0};
openair0_timestamp timestamp_eNB_tx[4]= {0,0,0,0};// all antennas must have the same ts
openair0_timestamp timestamp_eNB_rx[4]= {0,0,0,0};
openair0_timestamp timestamp_rx=0,timestamp_tx=0;
unsigned int rx_pos=0, next_rx_pos=0;
unsigned int tx_pos=0, prev_tx_pos=0;
unsigned int rx_pos=0, next_rx_pos=0;
unsigned int tx_pos=0, tx_pos_rf=0, prev_tx_pos=0;
unsigned int rt_period=0;
struct itimerspec timerspec;
pthread_mutex_t timer_mutex;
/*! \fn void create_eNB_trx_threads( rrh_module_t *dev_enb, uint8_t RT_flag,uint8_t NRT_flag)
/*! \fn void *rrh_eNB_rx_thread(void *arg)
* \brief this function
* \param[in]
* \param[out]
* \return
* \return none
* \note
* @ingroup _oai
*/
void *rrh_eNB_rx_thread(void *);
/*! \fn void *rrh_eNB_tx_thread(void *arg)
* \brief this function
* \param[in]
* \return none
* \note
* @ingroup _oai
*/
void *rrh_eNB_tx_thread(void *);
/*! \fn void *rrh_eNB_thread(void *arg)
* \brief this function
* \param[in]
* \return none
* \note
* @ingroup _oai
*/
void *rrh_eNB_thread(void *);
/*! \fn void check_dev_config( rrh_module_t *mod_enb)
* \brief this function
* \param[in] *mod_enb
* \return none
* \note
* @ingroup _oai
*/
static void check_dev_config( rrh_module_t *mod_enb);
/*! \fn void calc_rt_period_ns( openair0_config_t openair0_cfg)
* \brief this function
* \param[in] openair0_cfg
* \return none
* \note
* @ingroup _oai
*/
void create_eNB_trx_threads( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag){
static void calc_rt_period_ns( openair0_config_t openair0_cfg);
void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag) {
//int i;
int error_code_eNB;
int error_code_eNB;
pthread_t main_rrh_eNB_thread;
pthread_attr_t attr;
struct sched_param sched_param_rrh;
RT_flag_eNB=RT_flag;
NRT_flag_eNB=NRT_flag;
pthread_attr_init(&attr);
sched_param_rrh.sched_priority = sched_get_priority_max(SCHED_FIFO);
pthread_attr_setschedparam(&attr,&sched_param_rrh);
pthread_attr_setschedpolicy(&attr,SCHED_FIFO);
/*for (i=0; i<4; i++) {
pthread_mutex_init(&sync_eNB_mutex[i],NULL);
pthread_cond_init(&sync_eNB_cond[i],NULL);
}*/
/* handshake with client to exchange parameters */
mod_enb->eth_dev.trx_start_func(&mod_enb->eth_dev);//change port make it plus_id
memcpy((void*)&mod_enb->devs->openair0_cfg,(void *)&mod_enb->eth_dev.openair0_cfg,sizeof(openair0_config_t));
/* update certain parameters */
if ( mod_enb->devs->type == EXMIMO_IF ) {
if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 50 ){
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 95;
mod_enb->devs->openair0_cfg.tx_delay = 5;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 25 ){
mod_enb->devs->openair0_cfg.samples_per_packet = 1024;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 70;
mod_enb->devs->openair0_cfg.tx_delay = 6;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 6 ){
mod_enb->devs->openair0_cfg.samples_per_packet = 256;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 40;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
}
else if (mod_enb->devs->type == USRP_IF) {
if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 50 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 95;
mod_enb->devs->openair0_cfg.tx_delay = 5;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 25 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 1024;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 70;
mod_enb->devs->openair0_cfg.tx_delay = 6;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 6 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 256;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 40;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
}
else if (mod_enb->devs->type == BLADERF_IF) {
if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 50 ){
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 95;
mod_enb->devs->openair0_cfg.tx_delay = 5;
/* if a RF iterface is added to RRH module get the configuration parameters sent from eNB */
if (mod_enb->devs->type != NONE_IF ) {
memcpy((void*)&mod_enb->devs->openair0_cfg,(void *)&mod_enb->eth_dev.openair0_cfg,sizeof(openair0_config_t));
/* certain parameters have to be updated (calibration related)*/
if ( mod_enb->devs->type == EXMIMO_IF ) {
if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 50 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 95;
mod_enb->devs->openair0_cfg.tx_delay = 5;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 25 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 1024;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 70;
mod_enb->devs->openair0_cfg.tx_delay = 6;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 6 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 256;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 40;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 25 ){
mod_enb->devs->openair0_cfg.samples_per_packet = 1024;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 70;
mod_enb->devs->openair0_cfg.tx_delay = 6;
else if (mod_enb->devs->type == USRP_IF) {
if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 50 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 95;
mod_enb->devs->openair0_cfg.tx_delay = 5;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 25 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 1024;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 70;
mod_enb->devs->openair0_cfg.tx_delay = 6;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 6 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 256;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 40;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
}
else if( mod_enb->devs->openair0_cfg.num_rb_dl == 6 ){
mod_enb->devs->openair0_cfg.samples_per_packet = 256;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 40;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
}
/* check sanity of received configuration parameters and print */
check_dev_config(mod_enb);
#ifndef ETHERNET
/* initialize and apply configuration to associated RF device */
else if(mod_enb->devs->type == BLADERF_IF) {
if ( mod_enb->devs->openair0_cfg.num_rb_dl == 100 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 175;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 50 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 2048;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 95;
mod_enb->devs->openair0_cfg.tx_delay = 5;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 25 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 1024;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 70;
mod_enb->devs->openair0_cfg.tx_delay = 6;
}
else if ( mod_enb->devs->openair0_cfg.num_rb_dl == 6 ) {
mod_enb->devs->openair0_cfg.samples_per_packet = 256;
mod_enb->devs->openair0_cfg.tx_forward_nsamps = 40;
mod_enb->devs->openair0_cfg.tx_delay = 8;
}
}
/* check sanity of configuration parameters and print */
check_dev_config(mod_enb);
/* initialize and configure the RF device */
if (openair0_device_init(mod_enb->devs, &mod_enb->devs->openair0_cfg)<0){
LOG_E(RRH,"Exiting, cannot initialize RF device.\n");
exit(-1);
LOG_E(RRH,"Exiting, cannot initialize RF device.\n");
exit(-1);
}
else {
LOG_I(RRH,"RF device has been successfully initialized.\n");
}
/* start RF device */
if (mod_enb->devs->type == EXMIMO_IF ) {
} else {
if (mod_enb->devs->trx_start_func(mod_enb->devs)!=0)
LOG_E(RRH,"Unable to initiate RF device.\n");
}
#endif
LOG_I(RRH,"RF device has been initiated.\n");
}
/* create main eNB module thread
main_rrh_eNB_thread allocates memory
for TX/RX buffers and creates TX/RX
threads for every eNB module */
pthread_attr_init(&attr);
sched_param_rrh.sched_priority = sched_get_priority_max(SCHED_FIFO);
pthread_attr_setschedparam(&attr,&sched_param_rrh);
pthread_attr_setschedpolicy(&attr,SCHED_FIFO);
error_code_eNB = pthread_create(&main_rrh_eNB_thread, &attr, rrh_eNB_thread, (void *)mod_enb);
if (error_code_eNB) {
LOG_E(RRH,"Error while creating eNB thread\n");
exit(-1);
......@@ -212,16 +256,9 @@ void create_eNB_trx_threads( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT
}
/*! \fn void *rrh_eNB_thread(void *arg)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void *rrh_eNB_thread(void *arg)
{
void *rrh_eNB_thread(void *arg) {
rrh_module_t *dev=(rrh_module_t *)arg;
pthread_t eNB_rx_thread, eNB_tx_thread;
int error_code_eNB_rx, error_code_eNB_tx;
......@@ -229,42 +266,35 @@ void *rrh_eNB_thread(void *arg)
void *tmp;
unsigned int samples_per_frame=0;
samples_per_frame = dev->eth_dev.openair0_cfg.samples_per_frame;
while (rrh_exit==0) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TRX, 1 );
if (dev->devs->type != NONE_IF) {
set_rt_period(dev->eth_dev.openair0_cfg);
}
samples_per_frame = dev->eth_dev.openair0_cfg.samples_per_frame;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TRX, 1 );
/* calculate packet period */
calc_rt_period_ns(dev->eth_dev.openair0_cfg);
/* allocate memory for TX/RX buffers
each antenna port has a TX and a RX buffer
each TX and RX buffer is of (samples_per_frame + HEADER_SIZE) samples (size of samples is 4 bytes) */
rx_buffer_eNB = (int32_t**)malloc16(dev->eth_dev.openair0_cfg.rx_num_channels*sizeof(int32_t*));
tx_buffer_eNB = (int32_t**)malloc16(dev->eth_dev.openair0_cfg.tx_num_channels*sizeof(int32_t*));
LOG_I(RRH,"rx ch %d %p and tx ch %d %p\n",
dev->eth_dev.openair0_cfg.rx_num_channels,
rx_buffer_eNB,
dev->eth_dev.openair0_cfg.tx_num_channels,
tx_buffer_eNB);
tx_buffer_eNB = (int32_t**)malloc16(dev->eth_dev.openair0_cfg.tx_num_channels*sizeof(int32_t*));
LOG_D(RRH,"rx_buffer_eNB address =%p tx_buffer_eNB address =%p \n",rx_buffer_eNB,tx_buffer_eNB);
/* rx_buffer_eNB points to the beginning of data */
for (i=0; i<dev->eth_dev.openair0_cfg.rx_num_channels; i++) {
tmp=(void *)malloc(sizeof(int32_t)*(samples_per_frame + HEADER_SIZE));
memset(tmp,0,sizeof(int32_t)*(samples_per_frame + HEADER_SIZE));
rx_buffer_eNB[i]=( tmp + (HEADER_SIZE*sizeof(int32_t)) );
LOG_I(RRH," rx ch %d %p |%p\n",i,rx_buffer_eNB[i],tmp);
tmp=(void *)malloc16(sizeof(int32_t)*(samples_per_frame + 32));
memset(tmp,0,sizeof(int32_t)*(samples_per_frame + 32));
rx_buffer_eNB[i]=( tmp + (32*sizeof(int32_t)) );
LOG_D(RRH,"i=%d rx_buffer_eNB[i]=%p tmp= %p\n",i,rx_buffer_eNB[i],tmp);
}
/* tx_buffer_eNB points to the beginning of data */
for (i=0; i<dev->eth_dev.openair0_cfg.tx_num_channels; i++) {
tmp=(void *)malloc(sizeof(int32_t)*(samples_per_frame + HEADER_SIZE));
memset(tmp,0,sizeof(int32_t)*(samples_per_frame + HEADER_SIZE));
tx_buffer_eNB[i]=( tmp + (HEADER_SIZE*sizeof(int32_t)) );
LOG_I(RRH," tx ch %d %p| %p \n", i,tx_buffer_eNB[i],tmp);
tmp=(void *)malloc16(sizeof(int32_t)*(samples_per_frame + 32));
memset(tmp,0,sizeof(int32_t)*(samples_per_frame + 32));
tx_buffer_eNB[i]=( tmp + (32*sizeof(int32_t)) );
LOG_D(RRH,"i= %d tx_buffer_eNB[i]=%p tmp= %p \n",i,tx_buffer_eNB[i],tmp);
}
/* dummy initialization for TX/RX buffers */
for (i=0; i<dev->eth_dev.openair0_cfg.rx_num_channels; i++) {
......@@ -277,20 +307,28 @@ void *rrh_eNB_thread(void *arg)
for (j=0; j<samples_per_frame; j++) {
tx_buffer_eNB[i][j]=12+i;
}
}
/* allocate TX/RX buffers pointers used in write/read operations */
}
/* allocate TX/RX buffers pointers used in write/read operations */
rx_eNB = (void**)malloc16(dev->eth_dev.openair0_cfg.rx_num_channels*sizeof(int32_t*));
tx_eNB = (void**)malloc16(dev->eth_dev.openair0_cfg.tx_num_channels*sizeof(int32_t*));
/* init mutexes */
for (i=0; i<dev->eth_dev.openair0_cfg.tx_num_channels; i++) {
pthread_mutex_init(&sync_eNB_mutex[i],NULL);
pthread_cond_init(&sync_eNB_cond[i],NULL);
}
/* init mutexes */
pthread_mutex_init(&sync_trx_mutex,NULL);
/* create eNB module's TX/RX threads */
#ifdef LOWLATENCY
error_code_eNB_rx = pthread_create(&eNB_rx_thread, NULL, rrh_eNB_rx_thread, (void *)dev);
error_code_eNB_tx = pthread_create(&eNB_tx_thread, NULL, rrh_eNB_tx_thread, (void *)dev);
error_code_eNB_tx = pthread_create(&eNB_tx_thread, NULL, rrh_eNB_tx_thread, (void *)dev);
LOG_I(RRH,"[eNB][SCHED] deadline scheduling applied to eNB TX/RX threads\n");
#else
pthread_attr_t attr_eNB_rx, attr_eNB_tx;
struct sched_param sched_param_eNB_rx, sched_param_eNB_tx;
pthread_attr_init(&attr_eNB_rx);
pthread_attr_init(&attr_eNB_tx);
sched_param_eNB_rx.sched_priority = sched_get_priority_max(SCHED_FIFO);
......@@ -313,29 +351,62 @@ void *rrh_eNB_thread(void *arg)
LOG_E(RRH,"[eNB] Error while creating eNB TX thread\n");
exit(-1);
}
/* create timer thread; when no RF device is present a software clock is generated */
if (dev->devs->type == NONE_IF) {
int error_code_timer;
pthread_t main_timer_proc_thread;
LOG_I(RRH,"Creating timer thread with rt period %d ns.\n",rt_period);
/* setup the timer to generate an interrupt:
-for the first time in (sample_per_packet/sample_rate) ns
-and then every (sample_per_packet/sample_rate) ns */
timerspec.it_value.tv_sec = rt_period/1000000000;
timerspec.it_value.tv_nsec = rt_period%1000000000;
timerspec.it_interval.tv_sec = rt_period/1000000000;
timerspec.it_interval.tv_nsec = rt_period%1000000000;
#ifdef LOWLATENCY
error_code_timer = pthread_create(&main_timer_proc_thread, NULL, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[eNB][SCHED] deadline scheduling applied to timer thread \n");
#else
pthread_attr_t attr_timer;
struct sched_param sched_param_timer;
pthread_attr_init(&attr_timer);
sched_param_timer.sched_priority = sched_get_priority_max(SCHED_FIFO-1);
pthread_attr_setschedparam(&attr_timer,&sched_param_timer);
pthread_attr_setschedpolicy(&attr_timer,SCHED_FIFO-1);
pthread_mutex_init(&timer_mutex,NULL);
error_code_timer = pthread_create(&main_timer_proc_thread, &attr_timer, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[eNB][SCHED] FIFO scheduling applied to timer thread \n");
#endif
if (error_code_timer) {
LOG_E(RRH,"Error while creating timer proc thread\n");
exit(-1);
}
}
while (rrh_exit==0)
sleep(1);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TRX,0 );
} //while (eNB_exit==0)
}
rrh_eNB_thread_status = 0;
pthread_exit(&rrh_eNB_thread_status);
return(0);
}
/*! \fn void *rrh_eNB_rx_thread(void *arg)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void *rrh_eNB_rx_thread(void *arg){
void *rrh_eNB_rx_thread(void *arg) {
/* measuremnt related vars */
struct timespec time0,time1,time2;
......@@ -345,19 +416,23 @@ void *rrh_eNB_rx_thread(void *arg){
struct timespec time_req_1us, time_rem_1us;
rrh_module_t *dev = (rrh_module_t *)arg;
ssize_t bytes_sent;
int i, spp ,pck_rx=0;
openair0_vtimestamp last_hw_counter=0; //volatile int64_t
unsigned int samples_per_frame=0;
int i=0 ,pck_rx=0, s_cnt=0;
openair0_timestamp last_hw_counter=0; //volatile int64_t
unsigned int samples_per_frame=0,samples_per_subframe=0, spp_rf=0, spp_eth=0;
uint8_t loopback=0,measurements=0;
unsigned int subframe=0;
unsigned int frame=0;
//RTIME sleep_ns=1000;
time_req_1us.tv_sec = 0;
time_req_1us.tv_nsec =1000; //time_req_1us.tv_nsec = (int)rt_period/2;--->granularity issue
spp = dev->eth_dev.openair0_cfg.samples_per_packet;
spp_eth = dev->eth_dev.openair0_cfg.samples_per_packet;
spp_rf = dev->devs->openair0_cfg.samples_per_packet;
samples_per_frame = dev->eth_dev.openair0_cfg.samples_per_frame;
samples_per_subframe = (unsigned int)samples_per_frame/10;
loopback = dev->loopback;
measurements = dev->measurements;
next_rx_pos = spp;
next_rx_pos = spp_eth;
#ifdef LOWLATENCY
struct sched_attr attr;
......@@ -369,248 +444,298 @@ void *rrh_eNB_rx_thread(void *arg){
attr.sched_priority = 0;
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = (0.1 * 100) * 10000; //
attr.sched_deadline = rt_period;// 0.1 * 1000000; //
attr.sched_period = rt_period; //0.1 * 1000000; // each TX/RX thread has
attr.sched_runtime = (0.8 * 100) * 10000;//4 * 10000;
attr.sched_deadline = (0.9 * 100) * 10000;//rt_period-2000;
attr.sched_period = 1 * 1000000;//rt_period;
if (sched_setattr(0, &attr, flags) < 0 ) {
perror("[SCHED] eNB RX thread: sched_setattr failed (run with sudo)\n");
exit(-1);
}
#endif
while (rrh_exit == 0) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX, 1 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_HWCNT, hw_counter );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_LHWCNT, last_hw_counter );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_PCK, pck_rx );
for (i=0; i<dev->eth_dev.openair0_cfg.rx_num_channels; i++){
if (!eNB_rx_started) {
eNB_rx_started=1; // set this flag to 1 to indicate that eNB started
if (RT_flag_eNB==1) {
last_hw_counter=hw_counter;
}
} else {
if (RT_flag_eNB==1) {
if (hw_counter > last_hw_counter+1) {
printf("LR");
} else {
while (hw_counter < last_hw_counter+1){
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX_SLEEP, 1 );
nanosleep(&time_req_1us,&time_rem_1us);
//rt_sleep_ns(sleep_ns);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX_SLEEP, 0 );
}
while (rrh_exit == 0) {
while (rx_pos <(1 + subframe)*samples_per_subframe) {
LOG_D(RRH,"starting a new send:%d %d\n",sync_trx,frame);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX, 1 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_HW_FRAME_RX, frame);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_HW_SUBFRAME_RX, subframe );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_PCK, pck_rx );
LOG_D(RRH,"pack=%d rx_pos=%d subframe=%d frame=%d\n ",pck_rx, rx_pos, subframe,frame);
if (dev->devs->type == NONE_IF) {
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_HWCNT, hw_counter );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_LHWCNT, last_hw_counter );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_CNT, s_cnt );
if (!eNB_rx_started) {
eNB_rx_started=1; // set this flag to 1 to indicate that eNB started
if (RT_flag_eNB==1) {
last_hw_counter=hw_counter;//get current counter
}
} else {
if (RT_flag_eNB==1) {
if (hw_counter > last_hw_counter+1) {
printf("LR");
} else {
while ((hw_counter < last_hw_counter+1)) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX_SLEEP, 1 );
nanosleep(&time_req_1us,&time_rem_1us); //rt_sleep_ns(sleep_ns);
s_cnt++;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX_SLEEP, 0 );
}
}
}
}
}
if (measurements == 1 )
clock_gettime(CLOCK_MONOTONIC,&time1);
/* LOG_I(RRH,"send for%d at %d with %d |%d|%d| \n",i,rx_pos,timestamp_eNB_rx[i],((timestamp_eNB_rx[i]+spp)%samples_per_frame),next_rx_pos );
if ((timestamp_UE_tx[i]%samples_per_frame < next_rx_pos) && (UE_tx_started==1)) {
printf("eNB underflow\n");
if (NRT_flag_eNB==1) {
while ((timestamp_UE_tx[i]%samples_per_frame) < spp)
nanosleep(&time_req_1us,&time_rem_1us);
}
}
if (((rx_pos)< timestamp_UE_tx[i]%samples_per_frame) && (next_rx_pos > (timestamp_UE_tx[i]%samples_per_frame)) && (UE_tx_started==1)) {
printf("eNB underflow\n");
if (NRT_flag_eNB==1) {
while (next_rx_pos > (timestamp_UE_tx[i]%samples_per_frame))
nanosleep(&time_req_1us,&time_rem_1us);
}
}*/
if (measurements == 1 ) clock_gettime(CLOCK_MONOTONIC,&time1);
if (loopback == 1 ) {
if (sync_eNB_rx[i]==0) {
rx_eNB[i] = (void*)&tx_buffer_eNB[i][tx_pos];
LOG_I(RRH,"tx_buffer_eNB[i][tx_pos]=%d ,tx_pos=%d\n",tx_buffer_eNB[i][tx_pos],tx_pos);
}
else{
} else {
rx_eNB[i] = (void*)&rx_buffer_eNB[i][rx_pos];
LOG_I(RRH,"rx_buffer_eNB[i][rx_pos]=%d ,rx_pos=%d\n",rx_buffer_eNB[i][rx_pos],rx_pos);
}
}
rx_eNB[i] = (void*)&rx_buffer_eNB[i][rx_pos];
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RXCNT, rx_pos );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_TS, timestamp_eNB_rx[i]&0xffffffff );
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
//LOG_D(RRH," rx_eNB[i]=%p rx_buffer_eNB[i][rx_pos]=%p ,rx_pos=%d, i=%d ts=%d\n",rx_eNB[i],&rx_buffer_eNB[i][rx_pos],rx_pos,i,timestamp_eNB_rx[i]);
if ((bytes_sent = dev->eth_dev.trx_write_func (&dev->eth_dev,
timestamp_eNB_rx[i],
rx_eNB,
spp,
i,
0))<0){
perror("RRH eNB : sendto for RX");
}
}
for (i=0; i<dev->eth_dev.openair0_cfg.rx_num_channels; i++) {
rx_eNB[i] = (void*)&rx_buffer_eNB[i][rx_pos];
LOG_D(RRH," rx_eNB[i]=%p rx_buffer_eNB[i][rx_pos]=%p ,rx_pos=%d, i=%d ts=%d\n",rx_eNB[i],&rx_buffer_eNB[i][rx_pos],rx_pos,i,timestamp_rx);
}
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RXCNT, rx_pos );
if (dev->devs->type != NONE_IF) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ_RF, 1 );
/* Read operation to RF device (RX)*/
if ( dev->devs->trx_read_func (dev->devs,
&timestamp_rx,
rx_eNB,
spp_rf,
dev->devs->openair0_cfg.rx_num_channels
)<0) {
perror("RRH eNB : USRP read");
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ_RF, 0 );
}
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_RX_TS, timestamp_rx&0xffffffff );
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 1 );
if ((bytes_sent = dev->eth_dev.trx_write_func (&dev->eth_dev,
timestamp_rx,
rx_eNB,
spp_eth,
dev->eth_dev.openair0_cfg.rx_num_channels,
0))<0) {
perror("RRH eNB : ETHERNET write");
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
/* when there is no RF timestamp is updated by number of samples */
if (dev->devs->type == NONE_IF) {
timestamp_rx+=spp_eth;
last_hw_counter=hw_counter;
}
if (measurements == 1 ) {
clock_gettime(CLOCK_MONOTONIC,&time2);
if (trace_cnt++ > 10) {
total_rx_time = (unsigned int)(time2.tv_nsec - time0.tv_nsec);
if (total_rx_time < 0)
total_rx_time=1000000000-total_rx_time;
if ((total_rx_time > 0) && (total_rx_time < 1000000000)) {
trial++;
if (total_rx_time < min_rx_time)
min_rx_time = total_rx_time;
if (total_rx_time > max_rx_time){
max_rx_time = total_rx_time;
LOG_I(RRH,"Max value %d update at rx_position %d \n",total_rx_time,timestamp_rx);
}
average_rx_time = (long long unsigned int)((average_rx_time*trial)+total_rx_time)/(trial+1);
}
if (s_period++ == PRINTF_PERIOD) {
s_period=0;
LOG_I(RRH,"Average eNB RX time : %lu\tMax RX time : %lu\tMin RX time : %lu\n",average_rx_time,max_rx_time,min_rx_time);
}
}
memcpy(&time0,&time2,sizeof(struct timespec));
}
if (loopback == 1 ) {
pthread_mutex_lock(&sync_eNB_mutex[i]);
sync_eNB_rx[i]--;
pthread_mutex_unlock(&sync_eNB_mutex[i]);
}
rx_pos += spp_eth;
pck_rx++;
next_rx_pos=(rx_pos+spp_eth);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX, 0 );
/**/
if (frame>50) {
pthread_mutex_lock(&sync_trx_mutex);
while (sync_trx) {
pthread_cond_wait(&sync_trx_cond,&sync_trx_mutex);
}
sync_trx=1;
LOG_D(RRH,"out of while send:%d %d\n",sync_trx,frame);
pthread_cond_signal(&sync_trx_cond);
pthread_mutex_unlock(&sync_trx_mutex);
}
} // while
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE, 0 );
timestamp_eNB_rx[i]+=spp;
last_hw_counter=hw_counter;
if (measurements == 1 ) {
clock_gettime(CLOCK_MONOTONIC,&time2);
if (trace_cnt++ > 10) {
total_rx_time = (unsigned int)(time2.tv_nsec - time0.tv_nsec);
if (total_rx_time < 0)
total_rx_time=1000000000-total_rx_time;
if ((total_rx_time > 0) && (total_rx_time < 1000000000)) {
trial++;
if (total_rx_time < min_rx_time)
min_rx_time = total_rx_time;
if (total_rx_time > max_rx_time){
max_rx_time = total_rx_time;
LOG_I(RRH,"Max value %d update at rx_position %d \n",total_rx_time,timestamp_eNB_rx[i]);
}
average_rx_time = (long long unsigned int)((average_rx_time*trial)+total_rx_time)/(trial+1);
}
if (s_period++ == PRINTF_PERIOD) {
s_period=0;
LOG_I(RRH,"Average eNB RX time : %lu\tMax RX time : %lu\tMin RX time : %lu\n",average_rx_time,max_rx_time,min_rx_time);
}
}
memcpy(&time0,&time2,sizeof(struct timespec));
}
if (loopback == 1 ){
pthread_mutex_lock(&sync_eNB_mutex[i]);
sync_eNB_rx[i]--;
pthread_mutex_unlock(&sync_eNB_mutex[i]);
}
}//for each antenna
subframe++;
s_cnt=0;
rx_pos += spp;
pck_rx++;
next_rx_pos=(rx_pos+spp);
/* wrap around rx buffer index */
if (next_rx_pos >= samples_per_frame)
next_rx_pos -= samples_per_frame;
if (rx_pos >= samples_per_frame)
rx_pos -= samples_per_frame;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_RX, 0 );
/* wrap around subframe number */
if (subframe == 10 ) {
subframe = 0;
frame++;
}
} //while (eNB_exit==0)
return(0);
return 0;
}
/*! \fn void *rrh_eNB_tx_thread(void *arg)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void *rrh_eNB_tx_thread(void *arg){
void *rrh_eNB_tx_thread(void *arg) {
struct timespec time0a,time0,time1,time2;
rrh_module_t *dev = (rrh_module_t *)arg;
struct timespec time_req_1us, time_rem_1us;
ssize_t bytes_received;
int spp,i;
int i;
openair0_timestamp last_hw_counter=0;
unsigned int samples_per_frame=0;
unsigned int samples_per_frame=0,samples_per_subframe=0;
unsigned int spp_rf=0, spp_eth=0;
uint8_t loopback=0,measurements=0;
unsigned int subframe=0,frame=0;
unsigned int pck_tx=0;
#ifdef LOWLATENCY
struct sched_attr attr;
unsigned int flags = 0;
attr.size = sizeof(attr);
attr.sched_flags = 0;
attr.sched_nice = 0;
attr.sched_priority = 0;
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = (0.1 * 100) * 10000; //
attr.sched_deadline = rt_period;//0.1 * 1000000; //
attr.sched_period = rt_period;//0.1 * 1000000; // each TX/RX thread has
attr.sched_runtime = (0.8 * 100) * 10000;
attr.sched_deadline = (0.9 * 100) * 10000;
attr.sched_period = 1 * 1000000;
if (sched_setattr(0, &attr, flags) < 0 ) {
perror("[SCHED] eNB TX thread: sched_setattr failed\n");
exit(-1);
}
#endif
tx_pos=0;
time_req_1us.tv_sec = 0;
time_req_1us.tv_nsec = 1000;
spp = dev->eth_dev.openair0_cfg.samples_per_packet;
time_req_1us.tv_sec = 1;
time_req_1us.tv_nsec = 0;
spp_eth = dev->eth_dev.openair0_cfg.samples_per_packet;
spp_rf = dev->devs->openair0_cfg.samples_per_packet;
samples_per_frame = dev->eth_dev.openair0_cfg.samples_per_frame;
samples_per_subframe = (unsigned int)samples_per_frame/10;
tx_pos=0;
//tx_pos_rf=spp_rf*dev->devs->openair0_cfg.tx_delay;
loopback = dev->loopback;
measurements = dev->measurements;
while (rrh_exit == 0) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX, 1 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_HWCNT, hw_counter );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_LHWCNT, last_hw_counter );
if (measurements == 1 )
clock_gettime(CLOCK_MONOTONIC,&time0a);
for (i=0; i<dev->eth_dev.openair0_cfg.tx_num_channels; i++){
if (!eNB_tx_started) {
eNB_tx_started=1; // set this flag to 1 to indicate that eNB started
if (RT_flag_eNB==1) {
last_hw_counter=hw_counter;
}
} else {
if (RT_flag_eNB==1) {
if (hw_counter > last_hw_counter+1) {
printf("LT");
} else {
while (hw_counter < last_hw_counter+1){
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX_SLEEP, 1 );
nanosleep(&time_req_1us,&time_rem_1us);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX_SLEEP, 0 );
}
}
}
while (rrh_exit == 0) {
while (tx_pos < (1 + subframe)*samples_per_subframe) {
LOG_D(RRH,"bef lock read:%d %d\n",sync_trx,frame);
pthread_mutex_lock(&sync_trx_mutex);
while (!sync_trx) {
LOG_D(RRH,"in sync read:%d %d\n",sync_trx,frame);
pthread_cond_wait(&sync_trx_cond,&sync_trx_mutex);
}
if (measurements == 1 )
clock_gettime(CLOCK_MONOTONIC,&time1);
tx_eNB[i] = (void*)&tx_buffer_eNB[i][tx_pos];
LOG_D(RRH,"out of while read:%d %d\n",sync_trx,frame);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX, 1 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_HW_FRAME, frame);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_HW_SUBFRAME, subframe );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_PCK, pck_tx );
/*
if (dev->devs->type == NONE_IF) {
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_HWCNT, hw_counter );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_LHWCNT, last_hw_counter );
if (!eNB_tx_started) {
eNB_tx_started=1; // set this flag to 1 to indicate that eNB started
if (RT_flag_eNB==1) {
last_hw_counter=hw_counter;
}
} else {
if (RT_flag_eNB==1) {
if (hw_counter > last_hw_counter+1) {
printf("LT");
} else {
while ((hw_counter < last_hw_counter+1)) {
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX_SLEEP, 1 );
nanosleep(&time_req_1us,&time_rem_1us);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX_SLEEP, 0 );
}
}
}
}
} */
if (measurements == 1 ) clock_gettime(CLOCK_MONOTONIC,&time1);
for (i=0; i<dev->eth_dev.openair0_cfg.tx_num_channels; i++) tx_eNB[i] = (void*)&tx_buffer_eNB[i][tx_pos]; //RF!!!!!
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TXCNT, tx_pos );
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 1 );
bytes_received = dev->eth_dev.trx_read_func(&dev->eth_dev,
&timestamp_eNB_tx[i],
tx_eNB,
spp,
i);
/* Read operation to ETHERNET device */
if (( bytes_received = dev->eth_dev.trx_read_func(&dev->eth_dev,
&timestamp_tx,
tx_eNB,
spp_eth,
dev->eth_dev.openair0_cfg.tx_num_channels))<0) {
perror("RRH eNB : ETHERNET read");
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 0 );
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_TS, timestamp_eNB_tx[i]&0xffffffff );
if (NRT_flag_eNB==1) {
nrt_eNB_counter[i]++;
if (dev->devs->type != NONE_IF) {
LOG_D(RRH," tx_buffer_eNB[i][tx_pos]=%x t_buffer_eNB[i][tx_pos+1]=%x t_buffer_eNB[i][tx_pos+2]=%x \n",tx_buffer_eNB[0][tx_pos],tx_buffer_eNB[0][tx_pos+1],tx_buffer_eNB[0][tx_pos+2]);
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE_RF, 1 );
/* Write operation to RF device (TX)*/
if ( dev->devs->trx_write_func (dev->devs,
timestamp_tx,
tx_eNB,
spp_rf,
dev->devs->openair0_cfg.tx_num_channels,
0)<0){
perror("RRH eNB : USRP write");
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE_RF, 0 );
}
prev_tx_pos=tx_pos;
tx_pos += spp;
if (tx_pos >= samples_per_frame)
tx_pos -= samples_per_frame;
last_hw_counter=hw_counter;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TX_TS, timestamp_tx&0xffffffff );
if (dev->devs->type == NONE_IF) last_hw_counter=hw_counter;
if (loopback ==1 ) {
while (sync_eNB_rx[i]==0)
nanosleep(&time_req_1us,&time_rem_1us);
......@@ -618,30 +743,47 @@ void *rrh_eNB_tx_thread(void *arg){
pthread_mutex_lock(&sync_eNB_mutex[i]);
sync_eNB_rx[i]++;
pthread_mutex_unlock(&sync_eNB_mutex[i]);
}
}
}
if (measurements == 1 ) {
clock_gettime(CLOCK_MONOTONIC,&time2);
memcpy(&time0,&time2,sizeof(struct timespec));
if (measurements == 1 ) {
clock_gettime(CLOCK_MONOTONIC,&time2);
memcpy(&time0,&time2,sizeof(struct timespec));
}
prev_tx_pos=tx_pos;
tx_pos += spp_eth;
pck_tx++;
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX, 0 );
sync_trx=0;
pthread_cond_signal(&sync_trx_cond);
pthread_mutex_unlock(&sync_trx_mutex);
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_eNB_TX, 0 );
}
return(0);
/* wrap around tx buffer index */
if (tx_pos >= samples_per_frame)
tx_pos -= samples_per_frame;
/* wrap around subframe number */
subframe++;
if (subframe == 10 ) {
subframe = 0; // the radio frame is complete, start over
frame++;
}
} //while (eNB_exit==0)
return 0;
}
//needs to be fixed
void set_rt_period( openair0_config_t openair0_cfg){
static void calc_rt_period_ns( openair0_config_t openair0_cfg) {
rt_period= (double)(openair0_cfg.samples_per_packet/(openair0_cfg.samples_per_frame/10.0)*1000000);
AssertFatal(rt_period > 0, "Invalid rt period !%u\n", rt_period);
//only in case of NRT with emulated UE
//create_timer_thread();
LOG_I(RRH,"[eNB] Real time period is set to %u ns\n", rt_period);
}
void check_dev_config( rrh_module_t *mod_enb) {
static void check_dev_config( rrh_module_t *mod_enb) {
AssertFatal( (mod_enb->devs->openair0_cfg.num_rb_dl==100 || mod_enb->devs->openair0_cfg.num_rb_dl==50 || mod_enb->devs->openair0_cfg.num_rb_dl==25 || mod_enb->devs->openair0_cfg.num_rb_dl==6) , "Invalid number of resource blocks! %d\n", mod_enb->devs->openair0_cfg.num_rb_dl);
......@@ -656,7 +798,7 @@ void check_dev_config( rrh_module_t *mod_enb) {
AssertFatal( mod_enb->devs->openair0_cfg.tx_gain[0] > 0.0 ,"Invalid TX gain! %f\n", mod_enb->devs->openair0_cfg.tx_gain[0]);
AssertFatal( mod_enb->devs->openair0_cfg.rx_bw > 0.0 ,"Invalid RX bw! %f\n", mod_enb->devs->openair0_cfg.rx_bw);
AssertFatal( mod_enb->devs->openair0_cfg.tx_bw > 0.0 ,"Invalid RX bw! %f\n", mod_enb->devs->openair0_cfg.tx_bw);
// AssertFatal( mod_enb->devs->openair0_cfg.autocal[0] > 0 , "Invalid auto calibration choice! %d\n", mod_enb->devs->openair0_cfg.autocal[0]);
AssertFatal( mod_enb->devs->openair0_cfg.autocal[0] > 0 , "Invalid auto calibration choice! %d\n", mod_enb->devs->openair0_cfg.autocal[0]);
printf("\n---------------------RF device configuration parameters---------------------\n");
......
targets/RT/USER/lte-softmodem.c
View file @ 082dff13
......@@ -2991,23 +2991,7 @@ openair0_cfg[card].num_rb_dl=frame_parms[0]->N_RB_DL;
openair0.func_type = BBU_FUNC;
openair0_cfg[0].log_level = glog_level;
#ifdef ETHERNET
openair0.type=ETH_IF; // not used for the moment
openair0.func_type = BBU_FUNC;
openair0_dev_init_eth(&openair0, &openair0_cfg[0]);
#else
#ifdef EXMIMO
openair0.type=EXMIMO_IF;
printf("Setting the HW to EXMIMO and initializing openair0 ...\n");
#elif OAI_USRP
openair0.type=USRP_IF;
printf("Setting the HW to USRP and initializing openair0 ...\n");
#elif OAI_BLADERF
openair0.type=BLADERF_IF;
printf("Setting the HW to BLADERF and initializing openair0 ...\n");
#endif
if ((mode!=loop_through_memory) &&
(openair0_device_init(&openair0, &openair0_cfg[0]) <0)) {
printf("Exiting, cannot initialize device\n");
......@@ -3015,8 +2999,7 @@ openair0_cfg[card].num_rb_dl=frame_parms[0]->N_RB_DL;
}
else if (mode==loop_through_memory) {
}
#endif
printf("Done\n");
mac_xface = malloc(sizeof(MAC_xface));
......
targets/RT/USER/rrh.c
View file @ 082dff13
......@@ -58,8 +58,8 @@
#define RRH_UE_PORT 51000
#define RRH_UE_DEST_IP "127.0.0.1"
#define FRAME_MAX_SIZE 307200
#define DEFAULT_PERIOD_NS 133333
#define FRAME_MAX_SIZE 307200//76800
#define DEFAULT_PERIOD_NS 133333//200000
#define START_CMD 1
#define PRINTF_PERIOD 3750
......
targets/RT/USER/rrh.gtkw
View file @ 082dff13
[*]
[*] GTKWave Analyzer v3.3.58 (w)1999-2014 BSI
[*] Thu Jul 9 09:53:25 2015
[*] Thu Sep 17 14:23:43 2015
[*]
[dumpfile] "/tmp/openair_dump_rrh.vcd"
[dumpfile_mtime] "Thu Jul 9 09:52:29 2015"
[dumpfile_size] 170586112
[savefile] "/home/sud/openair4G/targets/RT/USER/eNB2.gtkw"
[timestart] 16177999000
[size] 1535 876
[dumpfile_mtime] "Thu Sep 17 14:21:43 2015"
[dumpfile_size] 636509125
[savefile] "/home/guepe/openair4G/targets/RT/USER/rrh.gtkw"
[timestart] 17746655400
[size] 1855 1056
[pos] -1 -1
*-17.749426 16178576148 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
*-15.826077 17746846200 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[sst_width] 224
[signals_width] 230
[sst_expanded] 1
[sst_vpaned_height] 230
[sst_vpaned_height] 287
@24
[color] 1
variables.hw_frame_rx[63:0]
[color] 1
variables.hw_subframe_rx[63:0]
@28
[color] 1
functions.eNB_rx
functions.eNB_rx_sleep
[color] 7
functions.trx_write
functions.trx_write_rf
@c00024
variables.rxcnt[63:0]
@28
......@@ -89,23 +93,27 @@ variables.rxcnt[63:0]
(63)variables.rxcnt[63:0]
@1401200
-group_end
@24
variables.pck_rx[63:0]
variables.hw_frame[63:0]
variables.hw_subframe[63:0]
@28
[color] 1
functions.eNB_tx
functions.eNB_tx_sleep
functions.trx_read_rf
[color] 7
functions.trx_write
[color] 7
functions.trx_read
@24
variables.txcnt[63:0]
variables.rx_ts[63:0]
variables.tx_ts[63:0]
variables.pck_rx[63:0]
variables.hw_cnt_rx[63:0]
variables.lhw_cnt_rx[63:0]
variables.hw_frame[63:0]
@28
functions.eNB_tm
@29
functions.eNB_trx
@25
[color] 3
variables.cnt[63:0]
[pattern_trace] 1
[pattern_trace] 0
targets/RT/USER/rrh_gw.c
View file @ 082dff13
......@@ -60,17 +60,17 @@
#include "log_extern.h"
#include "vcd_signal_dumper.h"
//#undef LOWLATENCY
/*****************************************************************************************
* ---------- *
* ------- RRH_BBU_IF ------- RRH_RF_IF -------USRP - COTS_UE- *
* - BBU - --------------- - RRH - ------------- -------BLADERF ---------- *
* ------- ------- -------EXMIMO *
* --------- *
* -------ETH_IF - EMU_UE- *
* --------- *
*****************************************************************************************/
/******************************************************************************
** FUNCTION PROTOTYPES **
******************************************************************************/
static void debug_init(void);
static void get_options(int argc, char *argv[]);
static void print_help(void);
static void get_RFinterfaces(void);
static rrh_module_t new_module(unsigned int id);
int get_ip_address(char* if_name);
char rrh_ip[20] = "192.168.12.242"; // there is code to detect the my ip address
int rrh_port = 50000; // has to be an option
......@@ -98,25 +98,51 @@ uint8_t measurements_flag=0;
/* Default operation as RRH:
- there are neither eNB nor UE modules
- no RF device is asscociated with RRH */
- no RF hardware is specified (NONE_IF)
- default ethernet interface is local */
uint8_t num_eNB_mod=0;
uint8_t num_UE_mod=0;
uint8_t num_EXMIMO_mod=0;
uint8_t num_USRP_mod=0;
uint8_t hardware_target=NONE_IF;
char* if_name="lo";
rrh_module_t *enb_array;
rrh_module_t *ue_array;
pthread_mutex_t timer_mutex;
openair0_vtimestamp hw_counter=0;
unsigned int rt_period=0;
struct itimerspec timerspec;
char* if_name="lo";
int main(int argc, char **argv) {
static void debug_init(void);
static void get_options(int argc, char *argv[]);
static void print_help(void);
/*!\fn static rrh_module_t new_module(unsigned int id);
* \brief creation of a eNB/UE module
* \param[in] module id
* \return module
* \note
* @ingroup _oai
*/
static rrh_module_t new_module(unsigned int id);
/*!\fn static int get_ip_address(char* if_name)
* \brief retrieves IP address from the specified network interface
* \param[in] name of network interface
* \return 0
* \note
* @ingroup _oai
*/
static int get_ip_address(char* if_name);
int main(int argc, char **argv) {
unsigned int i;
/* parse input arguments */
......@@ -125,58 +151,16 @@ int main(int argc, char **argv) {
debug_init();
/* */
set_latency_target();
/*make a graceful exit when ctrl-c is pressed */
/* make a graceful exit when ctrl-c is pressed */
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
/*probe RF front end devices interfaced to RRH */
// get_RFinterfaces();
#ifdef ETHERNET
int error_code_timer;
pthread_t main_timer_proc_thread;
LOG_I(RRH,"Creating timer thread with rt period %d ns.\n",rt_period);
/* setup the timer to generate an interrupt:
-for the first time in (sample_per_packet/sample_rate) ns
-and then every (sample_per_packet/sample_rate) ns */
timerspec.it_value.tv_sec = rt_period/1000000000;
timerspec.it_value.tv_nsec = rt_period%1000000000;
timerspec.it_interval.tv_sec = rt_period/1000000000;
timerspec.it_interval.tv_nsec = rt_period%1000000000;
//#ifndef LOWLATENCY
pthread_attr_t attr_timer;
struct sched_param sched_param_timer;
pthread_attr_init(&attr_timer);
sched_param_timer.sched_priority = sched_get_priority_max(SCHED_FIFO);
pthread_attr_setschedparam(&attr_timer,&sched_param_timer);
pthread_attr_setschedpolicy(&attr_timer,SCHED_FIFO);
pthread_mutex_init(&timer_mutex,NULL);
error_code_timer = pthread_create(&main_timer_proc_thread, &attr_timer, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[SCHED] FIFO scheduling applied to timer thread \n");
/*#else
error_code_timer = pthread_create(&main_timer_proc_thread, NULL, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[SCHED] deadline scheduling applied to timer thread \n");
#endif*/
if (error_code_timer) {
LOG_E(RRH,"Error while creating timer proc thread\n");
exit(-1);
}
#endif
/* create modules based on input arguments */
if (eNB_flag==1){
enb_array=(rrh_module_t*)malloc(num_eNB_mod*sizeof(rrh_module_t));
for(i=0;i<num_eNB_mod;i++){
enb_array[i]=new_module(i);//enb_array[i]=new_module(i, get_RF_interfaces(&hardware_target));
create_eNB_trx_threads(&enb_array[i],RT_flag,NRT_flag);
config_BBU_mod(&enb_array[i],RT_flag,NRT_flag);
LOG_I(RRH,"[eNB %d] module(s) created (out of %u) \n",i,num_eNB_mod);
}
}
......@@ -184,7 +168,7 @@ int main(int argc, char **argv) {
ue_array=(rrh_module_t*)malloc(num_UE_mod*sizeof(rrh_module_t));
for(i=0;i<num_UE_mod;i++){
ue_array[i]=new_module(i);
create_UE_trx_threads(&ue_array[i],RT_flag,NRT_flag);
config_UE_mod(&ue_array[i],RT_flag,NRT_flag);
LOG_I(RRH,"[UE %d] module(s) created (out of %u)\n",i, num_UE_mod);
}
}
......@@ -194,22 +178,10 @@ int main(int argc, char **argv) {
while (rrh_exit==0)
sleep(1);
//close sockets
return EXIT_SUCCESS;
}
/*!\fn openair0_device new_module (unsigned int id, dev_type_t type)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
static rrh_module_t new_module (unsigned int id) {
rrh_module_t rrh_mod;
......@@ -221,7 +193,9 @@ static rrh_module_t new_module (unsigned int id) {
/* each module is associated with an ethernet device */
rrh_mod.eth_dev.type=ETH_IF;
/* ethernet device is functioning within RRH */
rrh_mod.eth_dev.func_type=RRH_FUNC;
/* specify IP address */
get_ip_address(if_name);
openair0_cfg.my_ip=&rrh_ip[0];
openair0_cfg.my_port=rrh_port;
......@@ -231,8 +205,8 @@ static rrh_module_t new_module (unsigned int id) {
LOG_E(RRH,"Exiting, cannot initialize ethernet interface.\n");
exit(-1);
}
/* specify associated RF device */
/* allocate space and specify associated RF device */
openair0_device *oai_dv = (openair0_device *)malloc(sizeof(openair0_device));
memset(oai_dv,0, sizeof(openair0_device));
......@@ -257,121 +231,8 @@ static rrh_module_t new_module (unsigned int id) {
return rrh_mod;
}
/*! \fn void *timer_proc(void *arg)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void *timer_proc(void *arg) {
timer_t timerid;
struct itimerspec *timer= (struct itimerspec *)arg ; // the timer data structure
struct itimerspec *old_value;
/*
#ifdef LOWLATENCY
struct sched_attr attr;
unsigned int flags = 0;
attr.size = sizeof(attr);
attr.sched_flags = 0;
attr.sched_nice = 0;
attr.sched_priority = 0;
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = (0.1 * 100) * 10000; //
attr.sched_deadline = rt_period-30000;//(0.1 * 100) * 10000; //
attr.sched_period = rt_period;//(0.1 * 100) * 10000; // each TX/RX thread has, as a function of RT PERIOD ??
if (sched_setattr(0, &attr, flags) < 0 ) {
perror("[SCHED] timer thread: sched_setattr failed\n");
exit(-1);
}
#endif
*/
if (timer_create (CLOCK_REALTIME, NULL, &timerid) == -1) {
fprintf (stderr, "couldn't create a timer\n");
perror (NULL);
exit (EXIT_FAILURE);
}
signal(SIGALRM, timer_signal_handler);
LOG_I(RRH,"Timer has started!\n");
timer_settime (timerid, 0, timer, old_value);
while (!rrh_exit) {
sleep(1);
}
timer_delete(timerid);
return (0);
}
/*! \fn void timer_signal_handler(int sig)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void timer_signal_handler(int sig) {
if (sig == SIGALRM) {
pthread_mutex_lock(&timer_mutex);
hw_counter ++;
pthread_mutex_unlock(&timer_mutex);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_HW_FRAME, hw_counter);
}
}
/*! \fn void signal_handler(int sig)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void signal_handler(int sig) {
void *array[10];
size_t size;
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
} else {
printf("trying to exit gracefully...\n");
rrh_exit = 1;
}
}
/*! \fn void debug_init(void)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
static void debug_init(void) {
// log initialization
logInit();
set_glog(glog_level, glog_verbosity);
......@@ -384,17 +245,10 @@ static void debug_init(void) {
if (ouput_vcd) {
vcd_signal_dumper_init("/tmp/openair_dump_rrh.vcd");
}
}
}
/*!\fn void get_options(int argc, char *argv[])
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
static void get_options(int argc, char *argv[]) {
int opt;
......@@ -457,45 +311,35 @@ static void get_options(int argc, char *argv[]) {
}
/*!\fn void print_help(void)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
int get_ip_address(char* if_name) {
static int get_ip_address(char* if_name) {
int fd;
struct ifreq ifr;
fd = socket(AF_INET, SOCK_DGRAM, 0);
/* I want to get an IPv4 IP address */
ifr.ifr_addr.sa_family = AF_INET;
/* I want IP address attached to "eth0" */
/* I want IP address attached to "if_name" */
strncpy(ifr.ifr_name, if_name, IFNAMSIZ-1);
if ( ioctl(fd, SIOCGIFADDR, &ifr)<0 ) {
perror("IOCTL:");
exit(-1);
}
close(fd);
/* display result */
snprintf(&rrh_ip[0],20,"%s", inet_ntoa(((struct sockaddr_in *)&ifr.ifr_addr)->sin_addr));
LOG_I(RRH,"Got IP address %s from interface %s\n", rrh_ip,if_name);
ioctl(fd, SIOCGIFADDR, &ifr);
close(fd);
/* display result */
snprintf(&rrh_ip[0],20,"%s", inet_ntoa(((struct sockaddr_in *)&ifr.ifr_addr)->sin_addr));
printf("Got IP address %s from interface %s\n", rrh_ip,if_name);
return 0;
return 0;
}
/*!\fn void print_help(void)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
static void print_help(void) {
puts("Usage: \n");
......@@ -504,7 +348,7 @@ static void print_help(void) {
puts("\t -n create eNB module\n");
puts("\t -u create UE module\n");
puts("\t -g define global log level\n");
puts("\t -i set the RRH interface (default eth0)\n");
puts("\t -i set the RRH interface (default lo)\n");
puts("\t -r define rrh log level\n");
puts("\t -e define eNB log level\n");
puts("\t -x enable real time bahaviour\n");
......@@ -516,84 +360,90 @@ static void print_help(void) {
}
/*! \fn void exit_fun(const char* s)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void exit_fun(const char* s)
{
if (s != NULL) {
printf("%s %s() Exiting RRH: %s\n",__FILE__, __FUNCTION__, s);
}
rrh_exit = 1;
exit (-1);
}
void *timer_proc(void *arg) {
/*! \fn static void get_RFinterfaces(void)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
static void get_RFinterfaces(void) {
timer_t timerid;
struct itimerspec *timer= (struct itimerspec *)arg ; // the timer data structure
struct itimerspec *old_value;
EXMIMO_flag=1;
USRP_flag=1;
num_EXMIMO_mod=1;
num_USRP_mod=1;
#ifdef LOWLATENCY
struct sched_attr attr;
unsigned int flags = 0;
attr.size = sizeof(attr);
attr.sched_flags = 0;
attr.sched_nice = 0;
attr.sched_priority = 0;
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = (0.1 * 100) * 10000; //
attr.sched_deadline = rt_period-30000;//(0.1 * 100) * 10000;
attr.sched_period = rt_period;//(0.1 * 100) * 10000; // each TX/RX thread has, as a function of RT PERIOD ??
if (sched_setattr(0, &attr, flags) < 0 ) {
perror("[SCHED] timer thread: sched_setattr failed\n");
exit(-1);
}
#endif
if (timer_create (CLOCK_REALTIME, NULL, &timerid) == -1) {
fprintf (stderr, "couldn't create a timer\n");
perror (NULL);
exit (EXIT_FAILURE);
}
signal(SIGALRM, timer_signal_handler);
LOG_I(RRH,"Timer has started!\n");
timer_settime (timerid, 0, timer, old_value);
while (!rrh_exit) {
sleep(1);
}
timer_delete(timerid);
return (0);
}
/*!\fn void create_timer_thread(void)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void create_timer_thread() {
void timer_signal_handler(int sig) {
int error_code_timer;
pthread_t main_timer_proc_thread;
if (sig == SIGALRM) {
pthread_mutex_lock(&timer_mutex);
hw_counter ++;
pthread_mutex_unlock(&timer_mutex);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_CNT, hw_counter);//USED ELSEWHERE
}
}
LOG_I(RRH,"Creating timer thread with rt period %d ns.\n",rt_period);
/* setup the timer to generate an interrupt:
-for the first time in (sample_per_packet/sample_rate) ns
-and then every (sample_per_packet/sample_rate) ns */
timerspec.it_value.tv_sec = rt_period/1000000000;
timerspec.it_value.tv_nsec = rt_period%1000000000;
timerspec.it_interval.tv_sec = rt_period/1000000000;
timerspec.it_interval.tv_nsec = rt_period%1000000000;
pthread_mutex_init(&timer_mutex,NULL);
#ifndef LOWLATENCY
pthread_attr_t attr_timer;
struct sched_param sched_param_timer;
void signal_handler(int sig) {
pthread_attr_init(&attr_timer);
sched_param_timer.sched_priority = sched_get_priority_max(SCHED_FIFO-1);
pthread_attr_setschedparam(&attr_timer,&sched_param_timer);
pthread_attr_setschedpolicy(&attr_timer,SCHED_FIFO-1);
error_code_timer = pthread_create(&main_timer_proc_thread, &attr_timer, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[SCHED] FIFO scheduling applied to timer thread \n");
#else
error_code_timer = pthread_create(&main_timer_proc_thread, NULL, timer_proc, (void *)&timerspec);
LOG_I(RRH,"[SCHED] deadline scheduling applied to timer thread \n");
#endif
void *array[10];
size_t size;
if (error_code_timer) {
LOG_E(RRH,"Error while creating timer proc thread\n");
if (sig==SIGSEGV) {
// get void*'s for all entries on the stack
size = backtrace(array, 10);
// print out all the frames to stderr
fprintf(stderr, "Error: signal %d:\n", sig);
backtrace_symbols_fd(array, size, 2);
exit(-1);
} else {
printf("trying to exit gracefully...\n");
rrh_exit = 1;
}
}
void exit_fun(const char* s) {
if (s != NULL) {
printf("%s %s() Exiting RRH: %s\n",__FILE__, __FUNCTION__, s);
}
rrh_exit = 1;
exit (-1);
}
targets/RT/USER/rrh_gw.h
View file @ 082dff13
......@@ -45,41 +45,68 @@
#include "vcd_signal_dumper.h"
#include "assertions.h"
#define DEFAULT_PERIOD_NS 200000
#define DEFAULT_PERIOD_NS 200000 /* default value is calculated for 25 PRB */
#define RRH_UE_PORT 51000
#define RRH_UE_DEST_IP "127.0.0.1"
/*! \brief RRH supports two types of modules: eNB and UE
each module is associated a device of type ETH_IF
and optionally with an RF device (USRP/BLADERF/EXMIMO) */
each module is associated with an ethernet device (device of ETH_IF)
and optionally with a RF device (device type can be USRP_IF/BLADERF_IF/EXMIMO_IF/NONE_IF)
UE modules will always have RF device type NONE_IF */
typedef struct {
//! module id
/*! \brief module id */
uint8_t id;
//! loopback flag
uint8_t loopback;
//! measurement flag
uint8_t measurements;
//! module's ethernet device
openair0_device eth_dev;
//! pointer to RF module's device (pointer->since its optional)
openair0_device *devs;
/*! \brief! loopback flag */
uint8_t loopback;
/*! \brief measurement flag */
uint8_t measurements;
/*! \brief module's ethernet device */
openair0_device eth_dev;
/*! \brief pointer to RF module's device (pointer->since it's optional) */
openair0_device *devs;
}rrh_module_t;
/******************************************************************************
** FUNCTION PROTOTYPES **
******************************************************************************/
void signal_handler(int sig);
/*! \fn void timer_signal_handler(int sig)
* \brief this function
* \param[in] signal type
* \return none
* \note
* @ingroup _oai
*/
void timer_signal_handler(int);
/*! \fn void *timer_proc(void *arg)
* \brief this function
* \param[in]
* \param[out]
* \return
* \note
* @ingroup _oai
*/
void *timer_proc(void *);
void create_timer_thread(void);
/*! \fn void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag,uint8_t NRT_flag)
* \brief receive and apply configuration to modules' optional device
* \param[in] *mod_enb pointer to module
* \param[in] RT_flag real time flag
* \return none
* \note
* @ingroup _oai
*/
void config_BBU_mod( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag);
/*! \fn void config_UE_mod( rrh_module_t *dev_ue, uint8_t RT_flag,uint8_t NRT_flag)
* \brief this function
* \param[in] *mod_ue pointer to module
* \param[in]
* \return none
* \note
* @ingroup _oai
*/
void config_UE_mod( rrh_module_t *dev_ue, uint8_t RT_flag, uint8_t NRT_flag);
/******************************************************************************
** FUNCTION PROTOTYPES **
******************************************************************************/
void create_UE_trx_threads( rrh_module_t *dev_ue, uint8_t RT_flag, uint8_t NRT_flag);
void create_eNB_trx_threads( rrh_module_t *mod_enb, uint8_t RT_flag, uint8_t NRT_flag);
void signal_handler(int sig);
#endif
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment