Commit 086d0451 authored by Robert Schmidt's avatar Robert Schmidt

Add docker-compose and config for MBMS test

parent 7a6c2125
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "3GPP_eNODEB";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
mbms_dedicated_serving_cell = "DISABLE"
//Parameters for SIB18
rxPool_sc_CP_Len = "normal";
rxPool_sc_Period = "sf40";
rxPool_data_CP_Len = "normal";
rxPool_ResourceConfig_prb_Num = 20;
rxPool_ResourceConfig_prb_Start = 5;
rxPool_ResourceConfig_prb_End = 44;
rxPool_ResourceConfig_offsetIndicator_present = "prSmall";
rxPool_ResourceConfig_offsetIndicator_choice = 0;
rxPool_ResourceConfig_subframeBitmap_present = "prBs40";
rxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "00000000000000000000";
rxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
/* rxPool_dataHoppingConfig_hoppingParameter = 0;
rxPool_dataHoppingConfig_numSubbands = "ns1";
rxPool_dataHoppingConfig_rbOffset = 0;
rxPool_commTxResourceUC-ReqAllowed = "TRUE";
*/
// Parameters for SIB19
discRxPool_cp_Len = "normal"
discRxPool_discPeriod = "rf32"
discRxPool_numRetx = 1;
discRxPool_numRepetition = 2;
discRxPool_ResourceConfig_prb_Num = 5;
discRxPool_ResourceConfig_prb_Start = 3;
discRxPool_ResourceConfig_prb_End = 21;
discRxPool_ResourceConfig_offsetIndicator_present = "prSmall";
discRxPool_ResourceConfig_offsetIndicator_choice = 0;
discRxPool_ResourceConfig_subframeBitmap_present = "prBs40";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
enable_measurement_reports = "no";
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
////////// MCE parameters:
target_mce_m2_ip_address = ( { ipv4 = "127.0.0.7";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
///M2
enable_enb_m2 = "yes";
mbms_configuration_data_list = (
{
mbsfn_sync_area = 0x0001;
mbms_service_area_list=(
{
mbms_service_area=0x0001;
}
);
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
ENB_IPV4_ADDRESS_FOR_M2C = "127.0.0.2/24";
ENB_PORT_FOR_M2C = 36443; # Spec 36443
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
phy_test_mode = 0;
puSch10xSnr = 200;
puCch10xSnr = 200;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
MCEs = (
{
MCE_ID = 0xe00;
MCE_name = "MCE-Vicomtech-LTEBox";
//M2
enable_mce_m2 = "yes";
//M3
enable_mce_m3 = "yes";
target_mme_m3_ip_address = ( { ipv4 = "127.0.0.18";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
MCE_INTERFACE_NAME_FOR_M2_ENB = "lo";
MCE_IPV4_ADDRESS_FOR_M2C = "127.0.0.7/24";
MCE_PORT_FOR_M2C = 36443; # Spec 36443
MCE_INTERFACE_NAME_FOR_M3_MME = "lo";
MCE_IPV4_ADDRESS_FOR_M3C = "127.0.0.3/24";
MCE_PORT_FOR_M3C = 36444; # Spec 36444
};
plnm:
{
mcc = 208;
mnc = 93;
mnc_length = 2;
};
mbms_sched_info :
{
mcch_update_time = 10;
mbms_area_config_list = (
{
common_sf_allocation_period = 1; #rf4(0) rf8(1) rf16(2) rf32(3) rf64(4) rf128(5) rf256(6)
mbms_area_id = 0;
pmch_config_list = (
{
allocated_sf_end=32;
data_mcs=15;
mch_scheduling_period = 0; #rf8(0) rf16(1) rf32(2) rf64(3) rf128(4) rf256(5) rf512(6) rf1024(7)
mbms_session_list = (
{
#plnm + service_id ->tmgi
plnm:
{
mcc = 208;
mnc = 93;
mnc_length = 2;
}
service_id=0; #keep this allways as 0 (workaround for TUN if)
lcid=5; #this must be properly defined lcid:6+service:0 -> rab_id:5 //with new RLC set lcid either 4 or 5
}
);
}
);
mbms_sf_config_list = (
{
radioframe_allocation_period=0; #n1(0) n2(1) n4(2) n8(3) n16(4) n32(5)
radioframe_alloocation_offset=0;
num_frame="oneFrame";
subframe_allocation=57; #xx111001
//num_frame="fourFrame";
//subframe_allocation=14548987; #
}
);
}
);
};
mcch_config_per_mbsfn_area = (
{
mbsfn_area = 0;
pdcch_length = 1; #s1(0), s2(1)
repetition_period = 0; #rf32(0), rf64(1), rf128(2), rf256(3)
offset = 0;
modification_period = 0; #rf512(0; rf1024(1)
subframe_allocation_info = 32; #BITSTRING (6bits -> one frame) xx100000
mcs = 0; #n2(0), n7(1), n13(2), n19(3)
}
);
#); #end mbms_scheduling_info
}
);
MMEs = (
{
MME_ID = 0xe00;
MME_name = "MME-MBMS-Vicomtech-LTEBox";
//M3
enable_mme_m3 = "yes";
NETWORK_INTERFACES :
{
MME_INTERFACE_NAME_FOR_M3_MCE = "lo";
MME_IPV4_ADDRESS_FOR_M3C = "127.0.0.18/24";
MME_PORT_FOR_M3C = 36444; # Spec 36444
};
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "ens3";
FLEXRAN_IPV4_ADDRESS = "CI_FLEXRAN_CTL_IP_ADDR";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
log_config : {
global_log_level = "info";
hw_log_level = "info";
phy_log_level = "info";
mac_log_level = "info";
rlc_log_level = "info";
pdcp_log_level = "debug";
rrc_log_level = "info";
m3ap_log_level = "debug";
m2ap_log_level = "debug";
mce_app_log_level = "debug";
mme_app_log_level = "debug";
};
version: '3.8'
services:
oai_enb0:
image: oai-enb:develop
privileged: true
container_name: rfsim4g-oai-enb
networks:
public_net:
ipv4_address: 192.168.61.20
environment:
TZ: Europe/Paris
USE_VOLUMED_CONF: 'yes'
RFSIMULATOR: enb
USE_ADDITIONAL_OPTIONS: --rfsim --noS1 --log_config.global_log_options level,nocolor,time
volumes:
- ../../conf_files/enb.band7.tm1.25PRB.rfsim.mbms.conf:/opt/oai-enb/etc/mounted.conf
healthcheck:
test: /bin/bash -c "pgrep lte-softmodem"
interval: 10s
timeout: 5s
retries: 5
oai_ue0:
image: oai-lte-ue:develop
privileged: true
container_name: rfsim4g-oai-lte-ue0
networks:
public_net:
ipv4_address: 192.168.61.30
expose:
- "10000"
- "8888"
- "9999"
environment:
TZ: Europe/Paris
HOSTNAME: oai_ue0
RFSIMULATOR: 192.168.61.20
MCC: '208'
MNC: '93'
SHORT_IMSI: '100001111'
LTE_KEY: '8baf473f2f8fd09487cccbd7097c6862'
OPC: 'e734f8734007d6c5ce7a0508809e7e9c'
MSISDN: '33611123456'
HPLMN: 20893
USE_ADDITIONAL_OPTIONS: -C 2680000000 -r 25 --ue-rxgain 140 --ue-txgain 120 --nokrnmod 1 --rfsim --noS1 --log_config.global_log_options level,nocolor,time --noS1
healthcheck:
test: /bin/bash -c "pgrep lte-uesoftmodem"
interval: 10s
timeout: 5s
retries: 5
networks:
public_net:
name: rfsim4g-oai-public-net
ipam:
config:
- subnet: 192.168.61.0/26
driver_opts:
com.docker.network.bridge.name: "rfsim4g-public"
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment