Skip to content

O
OpenXG-RAN
Commit 23134fba authored by hardy's avatar hardy
Browse files
Options

adding test update + conf file for RA FR2

parent 3b2d5037
Show whitespace changes
Inline Side-by-side
Showing with 377 additions and 0 deletions
ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf 0 → 100644
View file @ 23134fba
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 311; mnc = 480; mnc_length = 3;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is pointA + 23 PRBs@120kHz SCS (same as initial BWP)
absoluteFrequencySSB = 2071241;
dl_frequencyBand = 261;
# this is 27.900 GHz
dl_absoluteFrequencyPointA = 2070833;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 3;
dl_carrierBandwidth = 32;
#initialDownlinkBWP
#genericParameters
# this is RBstart=0,L=32 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 8525;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 3;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=2,L=3
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=2,L=12
initialDLBWPstartSymbolAndLength_1 = 53;
initialDLBWPk0_2 = 0;
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
initialDLBWPk0_3 = 0;
initialDLBWPmappingType_3 = 0;
#this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
initialDLBWPstartSymbolAndLength_3 = 57; //43; //57;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 261;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 3;
ul_carrierBandwidth = 32;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 8525;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 3;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 52;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 7;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 7;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 3,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6;
initialULBWPmappingType_0 = 1
# this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 6;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 14;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 3;
ssb_PositionsInBurst_Bitmap = 0x0001000100010001L;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 3;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 3;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 3;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = 10;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.18.99";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
///X2
enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "192.168.18.199";
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.18.198/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.18.198/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "192.168.18.198/24";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1;
nb_rx = 1;
att_tx = 0;
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 75;
eNB_instances = [0];
sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
if_freq = 5124520000L;
clock_src = "external";
time_src = "external";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/runTestOnVM.sh
View file @ 23134fba
......@@ -2189,6 +2189,83 @@ function run_test_on_vm {
if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
then
#RA FR2 test, attention : has a different config file from the rest of the test
CN_CONFIG="noS1"
CONF_FILE=gnb.band261.tm1.32PRB.usrpn300.conf
S1_NOS1_CFG=0
PRB=32
FREQUENCY=28000 #28GHz
if [ ! -d $ARCHIVES_LOC ]
then
mkdir --parents $ARCHIVES_LOC
fi
local try_cnt=0
NR_STATUS=0
######### start of RA TEST loop
while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
do
SYNC_STATUS=0
RA_FR2_STATUS=0
rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*ra_fr2_test.log
echo "############################################################"
echo "${CN_CONFIG} : Starting the gNB"
echo "############################################################"
CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
#last argument = 1 is to enable --do-ra for RA test
start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1
echo "############################################################"
echo "${CN_CONFIG} : Starting the NR-UE"
echo "############################################################"
CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_ra_fr2_test.log
#last argument = 1 is to enable --do-ra for RA test
start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
if [ $NR_UE_SYNC -eq 0 ]
then
echo "Problem w/ gNB and NR-UE not syncing"
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
SYNC_STATUS=-1
try_cnt=$((try_cnt+1))
continue
fi
echo "############################################################"
echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
echo "############################################################"
sleep 20
terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
#check RA markers in gNB and NR UE log files
echo "############################################################"
echo "${CN_CONFIG} : Checking RA on gNB / NR-UE"
echo "############################################################"
# Proper check to be done when RA test is working!
check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
if [ $RA_FR2_STATUS -ne 0 ]
then
echo "RA FR2 test NOT OK"
echo "try_cnt = " $try_cnt
try_cnt=$((try_cnt+1))
else
try_cnt=$((try_cnt+10))
fi
done
########### end RA FR2 test
######### redefine config for the rest of the test
CN_CONFIG="noS1"
CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
S1_NOS1_CFG=0
......@@ -2377,6 +2454,7 @@ function run_test_on_vm {
echo "Checking run status"
echo "############################################################"
if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment