Skip to content

O
OpenXG-RAN
Commit 2c230f83 authored by rdoost's avatar rdoost
Browse files
Options

working tdd/fdd at 5 and 10 Mhz

parent 36d3e624
Expand all Show whitespace changes
Inline Side-by-side
Showing with 2116 additions and 1882 deletions
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ 2c230f83
...@@ -2017,7 +2017,7 @@ void prach_procedures(PHY_VARS_eNB *eNB) { ...@@ -2017,7 +2017,7 @@ void prach_procedures(PHY_VARS_eNB *eNB) {
eNB->UE_stats[(uint32_t)UE_id].UE_timing_offset = preamble_delay_list[preamble_max]&0x1FFF; //limit to 13 (=11+2) bits eNB->UE_stats[(uint32_t)UE_id].UE_timing_offset = preamble_delay_list[preamble_max]&0x1FFF; //limit to 13 (=11+2) bits
eNB->UE_stats[(uint32_t)UE_id].sector = 0; eNB->UE_stats[(uint32_t)UE_id].sector = 0;
LOG_I(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n", LOG_D(PHY,"[eNB %d/%d][RAPROC] Frame %d, subframe %d Initiating RA procedure (UE_id %d) with preamble %d, energy %d.%d dB, delay %d\n",
eNB->Mod_id, eNB->Mod_id,
eNB->CC_id, eNB->CC_id,
frame, frame,
...@@ -3042,7 +3042,7 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const ...@@ -3042,7 +3042,7 @@ void phy_procedures_eNB_uespec_RX(PHY_VARS_eNB *eNB,eNB_rxtx_proc_t *proc,const
#endif #endif
stop_meas(&eNB->ulsch_decoding_stats); stop_meas(&eNB->ulsch_decoding_stats);
LOG_G(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d RNTI %x RX power (%d,%d) RSSI (%d,%d) N0 (%d,%d) dB ACK (%d,%d), decoding iter %d\n", LOG_D(PHY,"[eNB %d][PUSCH %d] frame %d subframe %d RNTI %x RX power (%d,%d) RSSI (%d,%d) N0 (%d,%d) dB ACK (%d,%d), decoding iter %d\n",
eNB->Mod_id,harq_pid, eNB->Mod_id,harq_pid,
frame,subframe, frame,subframe,
eNB->ulsch[i]->rnti, eNB->ulsch[i]->rnti,
......
openair2/NETWORK_DRIVER/UE_IP/common.c
View file @ 2c230f83
...@@ -125,7 +125,7 @@ skb_p->mark = rb_idP; ...@@ -125,7 +125,7 @@ skb_p->mark = rb_idP;
skb_p->ip_summed = CHECKSUM_UNNECESSARY; skb_p->ip_summed = CHECKSUM_UNNECESSARY;
ipv_p = (struct ipversion*)((void*)&(skb_p->data[hard_header_len])); ipv_p = (ipversion_t *)((void*)&(skb_p->data[hard_header_len]));
switch (ipv_p->version) { switch (ipv_p->version) {
......
openair2/NETWORK_DRIVER/UE_IP/device.c
View file @ 2c230f83
...@@ -243,7 +243,12 @@ int ue_ip_hard_start_xmit(struct sk_buff *skb_pP, struct net_device *dev_pP) ...@@ -243,7 +243,12 @@ int ue_ip_hard_start_xmit(struct sk_buff *skb_pP, struct net_device *dev_pP)
// End debug information // End debug information
netif_stop_queue(dev_pP); netif_stop_queue(dev_pP);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0)
netif_trans_update(dev_pP);
#else
dev_pP->trans_start = jiffies; dev_pP->trans_start = jiffies;
#endif
#ifdef OAI_DRV_DEBUG_DEVICE #ifdef OAI_DRV_DEBUG_DEVICE
printk("[UE_IP_DRV][%s] step 1\n", __FUNCTION__); printk("[UE_IP_DRV][%s] step 1\n", __FUNCTION__);
#endif #endif
...@@ -315,7 +320,11 @@ void ue_ip_tx_timeout(struct net_device *dev_pP) ...@@ -315,7 +320,11 @@ void ue_ip_tx_timeout(struct net_device *dev_pP)
printk("[UE_IP_DRV][%s] begin\n", __FUNCTION__); printk("[UE_IP_DRV][%s] begin\n", __FUNCTION__);
// (ue_ip_priv_t *)(dev_pP->priv_p)->stats.tx_errors++; // (ue_ip_priv_t *)(dev_pP->priv_p)->stats.tx_errors++;
(priv_p->stats).tx_errors++; (priv_p->stats).tx_errors++;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(4,7,0)
netif_trans_update(dev_pP);
#else
dev_pP->trans_start = jiffies; dev_pP->trans_start = jiffies;
#endif
netif_wake_queue(dev_pP); netif_wake_queue(dev_pP);
printk("[UE_IP_DRV][%s] transmit timed out %s\n", __FUNCTION__,dev_pP->name); printk("[UE_IP_DRV][%s] transmit timed out %s\n", __FUNCTION__,dev_pP->name);
} }
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.iris030.tdd.conf
View file @ 2c230f83
...@@ -33,14 +33,14 @@ eNBs = ...@@ -33,14 +33,14 @@ eNBs =
eutra_band = 38; eutra_band = 38;
downlink_frequency = 2580000000L; downlink_frequency = 2580000000L;
uplink_frequency_offset = 0; uplink_frequency_offset = 0;
Nid_cell = 57; Nid_cell = 10;
N_RB_DL = 25; N_RB_DL = 100;
Nid_cell_mbsfn = 0; Nid_cell_mbsfn = 0;
nb_antenna_ports = 1; nb_antenna_ports = 1;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 52; tx_gain = 52; # [ ~50 for DEV-FE, ~30 for CBRS-FE ]
rx_gain = 110; rx_gain = 115; # [ ~115 for DEV-FE, ~90 fir CBRS-FE ]
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -50,7 +50,7 @@ eNBs = ...@@ -50,7 +50,7 @@ eNBs =
pucch_nRB_CQI = 1; pucch_nRB_CQI = 1;
pucch_nCS_AN = 0; pucch_nCS_AN = 0;
pucch_n1_AN = 32; pucch_n1_AN = 32;
pdsch_referenceSignalPower = -60; pdsch_referenceSignalPower = -30;
pdsch_p_b = 0; pdsch_p_b = 0;
pusch_n_SB = 1; pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE"; pusch_enable64QAM = "DISABLE";
...@@ -68,7 +68,7 @@ eNBs = ...@@ -68,7 +68,7 @@ eNBs =
srs_ackNackST =; srs_ackNackST =;
srs_MaxUpPts =;*/ srs_MaxUpPts =;*/
pusch_p0_Nominal = -90; pusch_p0_Nominal = -70;
pusch_alpha = "AL1"; pusch_alpha = "AL1";
pucch_p0_Nominal = -96; pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6; msg3_delta_Preamble = 6;
...@@ -137,7 +137,7 @@ eNBs = ...@@ -137,7 +137,7 @@ eNBs =
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.224.20.11"; mme_ip_address = ( { ipv4 = "127.0.0.20";
ipv6 = "fe80::6a6:9555:ded:fafa/64"; ipv6 = "fe80::6a6:9555:ded:fafa/64";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
...@@ -145,16 +145,16 @@ eNBs = ...@@ -145,16 +145,16 @@ eNBs =
); );
rrh_gw_config = ({ rrh_gw_config = ({
local_if_name = "eth0"; local_if_name = "eno1";
remote_address = "iris,0205"; remote_address = "iris,100.0.0.101";
local_address = "10.224.20.40"; local_address = "10.0.0.108";
local_port = 50000; #for raw option local port must be the same to remote local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000; remote_port = 50000;
rrh_gw_active = "yes"; rrh_gw_active = "yes";
tr_preference = "raw"; tr_preference = "raw";
rf_preference = "iris030"; rf_preference = "iris030";
iq_txshift = 4; iq_txshift = 4;
tx_sample_advance = -40; tx_sample_advance = 60;
tx_scheduling_advance = 9; tx_scheduling_advance = 9;
if_compression = "alaw"; if_compression = "alaw";
} }
...@@ -162,16 +162,10 @@ rrh_gw_config = ({ ...@@ -162,16 +162,10 @@ rrh_gw_config = ({
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
#ENB_INTERFACE_NAME_FOR_S1_MME = "eth1"; ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
#ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.146/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.10/8";
#ENB_INTERFACE_NAME_FOR_S1U = "eth1"; ENB_INTERFACE_NAME_FOR_S1U = "lo";
#ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.146/24"; ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.10/8";
#ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_INTERFACE_NAME_FOR_S1_MME = "enp1s0f0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.224.20.35/26";
ENB_INTERFACE_NAME_FOR_S1U = "enp1s0f0";
ENB_IPV4_ADDRESS_FOR_S1U = "10.224.20.35/26";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
...@@ -180,9 +174,9 @@ rrh_gw_config = ({ ...@@ -180,9 +174,9 @@ rrh_gw_config = ({
global_log_level ="info"; global_log_level ="info";
global_log_verbosity ="medium"; global_log_verbosity ="medium";
hw_log_level ="info"; hw_log_level ="info";
hw_log_verbosity ="medium"; hw_log_verbosity ="high";
phy_log_level ="info"; phy_log_level ="info";
phy_log_verbosity ="medium"; phy_log_verbosity ="high";
mac_log_level ="info"; mac_log_level ="info";
mac_log_verbosity ="high"; mac_log_verbosity ="high";
rlc_log_level ="info"; rlc_log_level ="info";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.usrpb210.conf
View file @ 2c230f83
...@@ -17,7 +17,7 @@ eNBs = ...@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208"; mobile_country_code = "208";
mobile_network_code = "94"; mobile_network_code = "92";
////////// Physical parameters: ////////// Physical parameters:
...@@ -39,7 +39,7 @@ eNBs = ...@@ -39,7 +39,7 @@ eNBs =
nb_antenna_ports = 1; nb_antenna_ports = 1;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 110;
rx_gain = 125; rx_gain = 125;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
...@@ -137,20 +137,36 @@ eNBs = ...@@ -137,20 +137,36 @@ eNBs =
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.70"; mme_ip_address = ( { ipv4 = "127.0.0.20";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
} }
); );
rrh_gw_config = ({
local_if_name = "eno1";
remote_address = "iris,RF3C000052";
local_address = "10.0.0.108";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "iris030";
iq_txshift = 4;
tx_sample_advance = -40;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1"; ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.146/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.10/8";
ENB_INTERFACE_NAME_FOR_S1U = "eth1"; ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.146/24"; ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.10/8";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
...@@ -159,9 +175,9 @@ eNBs = ...@@ -159,9 +175,9 @@ eNBs =
global_log_level ="info"; global_log_level ="info";
global_log_verbosity ="medium"; global_log_verbosity ="medium";
hw_log_level ="info"; hw_log_level ="info";
hw_log_verbosity ="medium"; hw_log_verbosity ="high";
phy_log_level ="info"; phy_log_level ="info";
phy_log_verbosity ="medium"; phy_log_verbosity ="high";
mac_log_level ="info"; mac_log_level ="info";
mac_log_verbosity ="high"; mac_log_verbosity ="high";
rlc_log_level ="info"; rlc_log_level ="info";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band5.tm1.usrpb210.conf
View file @ 2c230f83
...@@ -23,6 +23,11 @@ eNBs = ...@@ -23,6 +23,11 @@ eNBs =
component_carriers = ( component_carriers = (
{ {
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD"; frame_type = "FDD";
tdd_config = 3; tdd_config = 3;
tdd_config_s = 0; tdd_config_s = 0;
...@@ -33,9 +38,10 @@ eNBs = ...@@ -33,9 +38,10 @@ eNBs =
Nid_cell = 0; Nid_cell = 0;
N_RB_DL = 25; N_RB_DL = 25;
Nid_cell_mbsfn = 0; Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 110;
rx_gain = 115; rx_gain = 115;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
...@@ -97,6 +103,7 @@ eNBs = ...@@ -97,6 +103,7 @@ eNBs =
ue_TimersAndConstants_t311 = 10000; ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20; ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1; ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
} }
); );
...@@ -132,20 +139,41 @@ eNBs = ...@@ -132,20 +139,41 @@ eNBs =
}; };
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.13.11"; mme_ip_address = ( { ipv4 = "127.0.0.20";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
} }
); );
rrh_gw_config = ({
local_if_name = "eno1";
remote_address = "iris,RF3C000052";
local_address = "10.0.0.108";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "iris030";
iq_txshift = 4;
tx_sample_advance = -40;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.13.10/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.10/8";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.13.10/24"; ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.10/8";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.iris030.conf
View file @ 2c230f83
...@@ -39,8 +39,8 @@ eNBs = ...@@ -39,8 +39,8 @@ eNBs =
nb_antenna_ports = 1; nb_antenna_ports = 1;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 52; tx_gain = 52; # [~50 for DEV-FE, ~30 for CBRS-FE]
rx_gain = 110; rx_gain = 115; # [115 for DEV-FE, 90 for CBRS-FE]
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
prach_high_speed = "DISABLE"; prach_high_speed = "DISABLE";
...@@ -137,7 +137,7 @@ eNBs = ...@@ -137,7 +137,7 @@ eNBs =
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "10.224.20.11"; mme_ip_address = ( { ipv4 = "127.0.0.20";
ipv6 = "fe80::6a6:9555:ded:fafa"; ipv6 = "fe80::6a6:9555:ded:fafa";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
...@@ -145,9 +145,9 @@ eNBs = ...@@ -145,9 +145,9 @@ eNBs =
); );
rrh_gw_config = ({ rrh_gw_config = ({
local_if_name = "eth0"; local_if_name = "eno1";
remote_address = "iris,0205"; remote_address = "iris,RF3C000052";
local_address = "10.224.20.47" local_address = "100.0.0.108"
local_port = 50000; #for raw option local port must be the same to remote local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000; remote_port = 50000;
rrh_gw_active = "yes"; rrh_gw_active = "yes";
...@@ -161,10 +161,10 @@ rrh_gw_config = ({ ...@@ -161,10 +161,10 @@ rrh_gw_config = ({
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "enp1s0f0"; ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "10.224.20.35/26"; ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.10/8";
ENB_INTERFACE_NAME_FOR_S1U = "enp1s0f0"; ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "10.224.20.35/26"; ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.10/8";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
#ENB_INTERFACE_NAME_FOR_S1_MME = "enp1s0f0"; #ENB_INTERFACE_NAME_FOR_S1_MME = "enp1s0f0";
...@@ -183,7 +183,7 @@ rrh_gw_config = ({ ...@@ -183,7 +183,7 @@ rrh_gw_config = ({
phy_log_level ="info"; phy_log_level ="info";
phy_log_verbosity ="medium"; phy_log_verbosity ="medium";
mac_log_level ="info"; mac_log_level ="info";
mac_log_verbosity ="high"; mac_log_verbosity ="medium";
rlc_log_level ="info"; rlc_log_level ="info";
rlc_log_verbosity ="medium"; rlc_log_verbosity ="medium";
pdcp_log_level ="info"; pdcp_log_level ="info";
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
View file @ 2c230f83
...@@ -17,7 +17,7 @@ eNBs = ...@@ -17,7 +17,7 @@ eNBs =
mobile_country_code = "208"; mobile_country_code = "208";
mobile_network_code = "94"; mobile_network_code = "92";
////////// Physical parameters: ////////// Physical parameters:
...@@ -33,13 +33,13 @@ eNBs = ...@@ -33,13 +33,13 @@ eNBs =
eutra_band = 7; eutra_band = 7;
downlink_frequency = 2660000000L; downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000; uplink_frequency_offset = -120000000;
Nid_cell = 0; Nid_cell = 66;
N_RB_DL = 25; N_RB_DL = 25;
Nid_cell_mbsfn = 0; Nid_cell_mbsfn = 0;
nb_antenna_ports = 1; nb_antenna_ports = 1;
nb_antennas_tx = 1; nb_antennas_tx = 1;
nb_antennas_rx = 1; nb_antennas_rx = 1;
tx_gain = 90; tx_gain = 110;
rx_gain = 125; rx_gain = 125;
prach_root = 0; prach_root = 0;
prach_config_index = 0; prach_config_index = 0;
...@@ -137,20 +137,40 @@ eNBs = ...@@ -137,20 +137,40 @@ eNBs =
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.70"; mme_ip_address = ( { ipv4 = "127.0.0.20";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
} }
); );
rrh_gw_config = ({
local_if_name = "eno1";
remote_address = "iris,RF3C000052";
local_address = "10.0.0.108";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
rrh_gw_active = "yes";
tr_preference = "raw";
rf_preference = "iris030";
iq_txshift = 4;
tx_sample_advance = -40;
tx_scheduling_advance = 9;
if_compression = "alaw";
}
);
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth1"; ENB_INTERFACE_NAME_FOR_S1_MME = "lo";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.146/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "127.0.0.10/8";
ENB_INTERFACE_NAME_FOR_S1U = "eth1"; ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.146/24"; ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.10/8";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
}; };
......
targets/RT/USER/lte-enb.c
View file @ 2c230f83
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment