Merge remote-tracking branch 'origin/docker-improvements-2021-april' into integration_2021_wk17_b

docker/Dockerfile.eNB.rhel8.2

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM localhost/ran-build:latest AS enb-build 
+FROM ran-build:latest AS enb-build
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
@@ -37,10 +37,9 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --eNB --ninja -w USRP --verbose-ci
 
-# debug
-#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15
-#RUN ls -ls /oai-ran/targets/bin
-#RUN ls -ls /oai-ran/cmake_targets/ran_build/build/*.so
+RUN yum install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
 
 #start from scratch for target executable
 FROM registry.access.redhat.com/ubi8/ubi:latest as oai-enb
@@ -59,6 +58,7 @@ RUN yum update -y && \
 
 WORKDIR /opt/oai-enb/bin
 COPY --from=enb-build /oai-ran/targets/bin/lte-softmodem.Rel15 .
+COPY --from=enb-build /oai-ran/docker/scripts/enb_entrypoint.sh entrypoint.sh
 
 WORKDIR /usr/local/lib/
 COPY --from=enb-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -93,34 +93,16 @@ COPY --from=enb-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
 
 RUN ldconfig
 
-#debug
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libdfts.so
-#RUN ldd /usr/local/lib/liboai_iqplayer.so
-#RUN ldd /opt/oai-enb/bin/lte-softmodem.Rel15
-
 # Copy the relevant configuration files for eNB
 WORKDIR /opt/oai-enb/etc
-COPY --from=enb-build /oai-ran/ci-scripts/conf_files/enb.* .
-COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rcc.* .
-COPY --from=enb-build /oai-ran/ci-scripts/conf_files/cu.* .
-COPY --from=enb-build /oai-ran/ci-scripts/conf_files/du.* .
-COPY --from=enb-build /oai-ran/ci-scripts/conf_files/rru.* .
+COPY --from=enb-build /oai-ran/docker/etc .
 
 WORKDIR /opt/oai-enb
 
-#EXPOSE 2152/udp  # S1U, GTP/UDP
-#EXPOSE 22100/tcp # ?
-#EXPOSE 36412/udp # S1C, SCTP/UDP
-#EXPOSE 36422/udp # X2C, SCTP/UDP
-#EXPOSE 50000/udp # IF5 / ORI (control)
-#EXPOSE 50001/udp # IF5 / ECPRI (data)
+# 2152 --> S1U, GTP/UDP
+# 36412 --> S1C, SCTP/UDP
+# 36422 --> X2C, SCTP/UDP
+EXPOSE 2152/udp 36412/udp 36422/udp
 
-#CMD ["/opt/oai-enb/bin/lte-softmodem", "-O", "/opt/oai-enb/etc/enb.conf"]
-#ENTRYPOINT ["/opt/oai-enb/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+ENTRYPOINT ["/opt/oai-enb/bin/entrypoint.sh"]
+CMD ["/opt/oai-enb/bin/lte-softmodem.Rel15", "-O", "/opt/oai-enb/etc/enb.conf"]

docker/Dockerfile.eNB.ubuntu18

@@ -41,11 +41,6 @@ RUN apt-get install -y python3-pip && \
     pip3 install --ignore-installed pyyaml && \
     python3 ./docker/scripts/generateTemplate.py ./docker/scripts/enb_parameters.yaml
 
-# debug
-#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-softmodem.Rel15
-#RUN ls -ls /oai-ran/targets/bin
-#RUN ls -ls /oai-ran/cmake_targets/ran_build/build/*.so
-
 #start from scratch for target executable
 FROM ubuntu:bionic as oai-enb
 ENV DEBIAN_FRONTEND=noninteractive
@@ -98,17 +93,6 @@ COPY --from=enb-build /usr/local/lib/libprotobuf-c.so.1 .
 
 RUN ldconfig
 
-#debug
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libdfts.so
-#RUN ldd /usr/local/lib/liboai_iqplayer.so
-#RUN ldd /opt/oai-enb/bin/lte-softmodem.Rel15
-
 # Copy the relevant configuration files for eNB
 WORKDIR /opt/oai-enb/etc
 COPY --from=enb-build /oai-ran/docker/etc .

docker/Dockerfile.lteUE.rhel8.2

@@ -25,7 +25,7 @@
 #
 #---------------------------------------------------------------------
 
-FROM localhost/ran-build:latest AS lte-ue-build 
+FROM ran-build:latest AS lte-ue-build
 
 RUN rm -Rf /oai-ran
 WORKDIR /oai-ran
@@ -37,10 +37,10 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --UE --ninja -w USRP --verbose-ci
 
-# debug
-#RUN ldconfig -v && ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15
-#RUN ls -lst /oai-ran/targets/bin
-#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
+RUN yum install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/lte_ue_parameters.yaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/lte_ue_sim_parameters.yaml
 
 #start from scratch for target executable
 FROM registry.access.redhat.com/ubi8/ubi:latest as oai-lte-ue
@@ -59,12 +59,10 @@ RUN yum update -y && \
 
 WORKDIR /opt/oai-lte-ue/bin
 COPY --from=lte-ue-build /oai-ran/targets/bin/lte-uesoftmodem.Rel15 .
+COPY --from=lte-ue-build /oai-ran/docker/scripts/lte_ue_entrypoint.sh entrypoint.sh
 COPY --from=lte-ue-build /oai-ran/targets/bin/conf2uedata .
 COPY --from=lte-ue-build /oai-ran/targets/bin/nvram .
 COPY --from=lte-ue-build /oai-ran/targets/bin/usim .
-COPY --from=lte-ue-build /oai-ran/targets/bin/.ue_emm.nvram0 .
-COPY --from=lte-ue-build /oai-ran/targets/bin/.ue.nvram0 .
-COPY --from=lte-ue-build /oai-ran/targets/bin/.usim.nvram0 .
 
 WORKDIR /usr/local/lib/
 COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -99,26 +97,10 @@ COPY --from=lte-ue-build /usr/local/lib64/libuhd.so.4.0.0 /usr/local/lib64
 
 RUN ldconfig
 
-#debug
-#RUN ldd /opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15
-#RUN ldd /opt/oai-lte-ue/bin/conf2uedata
-#RUN ldd /opt/oai-lte-ue/bin/nvram
-#RUN ldd /opt/oai-lte-ue/bin/usim
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libSIMU.so
-#RUN ldd /usr/local/lib/libdfts.so
-
-# Copy the relevant configuration files for eNB
+# Copy the relevant configuration files for UE
 WORKDIR /opt/oai-lte-ue/etc
-COPY --from=lte-ue-build /oai-ran/ci-scripts/conf_files/ue.* .
-COPY --from=lte-ue-build /oai-ran/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf ./ue_usim.conf
+COPY --from=lte-ue-build /oai-ran/docker/etc .
 
 WORKDIR /opt/oai-lte-ue
-#CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem", "-O", "/opt/oai-lte-ue/etc/enb.conf"]
-#ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15"]
+ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]

docker/Dockerfile.lteUE.ubuntu18

@@ -37,11 +37,10 @@ RUN /bin/sh oaienv && \
     mkdir -p log && \
     ./build_oai --UE --ninja -w USRP --verbose-ci
 
-# debug
-#RUN ldconfig -v
-#RUN ldd /oai-ran/targets/bin/lte-uesoftmodem.Rel15
-#RUN ls -lst /oai-ran/targets/bin
-#RUN ls -lst /oai-ran/cmake_targets/ran_build/build/*.so
+RUN apt-get install -y python3-pip && \
+    pip3 install --ignore-installed pyyaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/lte_ue_parameters.yaml && \
+    python3 ./docker/scripts/generateTemplate.py ./docker/scripts/lte_ue_sim_parameters.yaml
 
 #start from scratch for target executable
 FROM ubuntu:bionic as oai-lte-ue
@@ -76,12 +75,10 @@ RUN apt-get update && \
 
 WORKDIR /opt/oai-lte-ue/bin
 COPY --from=lte-ue-build /oai-ran/targets/bin/lte-uesoftmodem.Rel15 .
+COPY --from=lte-ue-build /oai-ran/docker/scripts/lte_ue_entrypoint.sh entrypoint.sh
 COPY --from=lte-ue-build /oai-ran/targets/bin/conf2uedata .
 COPY --from=lte-ue-build /oai-ran/targets/bin/nvram .
 COPY --from=lte-ue-build /oai-ran/targets/bin/usim .
-COPY --from=lte-ue-build /oai-ran/targets/bin/.ue_emm.nvram0 .
-COPY --from=lte-ue-build /oai-ran/targets/bin/.ue.nvram0 .
-COPY --from=lte-ue-build /oai-ran/targets/bin/.usim.nvram0 .
 
 WORKDIR /usr/local/lib/
 COPY --from=lte-ue-build /oai-ran/targets/bin/liboai_eth_transpro.so.Rel15 .
@@ -100,26 +97,10 @@ COPY --from=lte-ue-build /usr/local/lib/libprotobuf-c.so.1 .
 
 RUN ldconfig
 
-#debug
-#RUN ldd /opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15
-#RUN ldd /opt/oai-lte-ue/bin/conf2uedata
-#RUN ldd /opt/oai-lte-ue/bin/nvram
-#RUN ldd /opt/oai-lte-ue/bin/usim
-#RUN ldd /usr/local/lib/liboai_eth_transpro.so.Rel15
-#RUN ldd /usr/local/lib/libtcp_bridge_oai.so.Rel15
-#RUN ldd /usr/local/lib/librfsimulator.so.Rel15
-#RUN ldd /usr/local/lib/liboai_usrpdevif.so.Rel15
-#RUN ldd /usr/local/lib/libcoding.so
-#RUN ldd /usr/local/lib/libparams_libconfig.so
-#RUN ldd /usr/local/lib/libSIMU.so
-#RUN ldd /usr/local/lib/libdfts.so
-
-# Copy the relevant configuration files for eNB
+# Copy the relevant configuration files for UE
 WORKDIR /opt/oai-lte-ue/etc
-COPY --from=lte-ue-build /oai-ran/ci-scripts/conf_files/ue.* ./
-COPY --from=lte-ue-build /oai-ran/openair3/NAS/TOOLS/ue_eurecom_test_sfr.conf ./ue_usim.conf
+COPY --from=lte-ue-build /oai-ran/docker/etc .
 
 WORKDIR /opt/oai-lte-ue
-#CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem", "-O", "/opt/oai-lte-ue/etc/enb.conf"]
-#ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]
-CMD ["sleep", "infinity"]
+CMD ["/opt/oai-lte-ue/bin/lte-uesoftmodem.Rel15"]
+ENTRYPOINT ["/opt/oai-lte-ue/bin/entrypoint.sh"]

docker/scripts/enb_entrypoint.sh

@@ -2,17 +2,20 @@
 
 set -euo pipefail
 
+PREFIX=/opt/oai-enb
+RRC_INACTIVITY_THRESHOLD=${RRC_INACTIVITY_THRESHOLD:-0}
+
 # Based another env var, pick one template to use
-if [[ -v USE_FDD_CU ]]; then ln -s /opt/oai-enb/etc/cu.fdd.conf /opt/oai-enb/etc/enb.conf; fi
-if [[ -v USE_FDD_DU ]]; then ln -s /opt/oai-enb/etc/du.fdd.conf /opt/oai-enb/etc/enb.conf; fi
-if [[ -v USE_FDD_MONO ]]; then ln -s /opt/oai-enb/etc/enb.fdd.conf /opt/oai-enb/etc/enb.conf; fi
-if [[ -v USE_TDD_MONO ]]; then ln -s /opt/oai-enb/etc/enb.tdd.conf /opt/oai-enb/etc/enb.conf; fi
-if [[ -v USE_FDD_RCC ]]; then ln -s /opt/oai-enb/etc/rcc.if4p5.enb.fdd.conf /opt/oai-enb/etc/enb.conf; fi
-if [[ -v USE_FDD_RRU ]]; then ln -s /opt/oai-enb/etc/rru.fdd.conf /opt/oai-enb/etc/enb.conf; fi
-if [[ -v USE_TDD_RRU ]]; then ln -s /opt/oai-enb/etc/rru.tdd.conf /opt/oai-enb/etc/enb.conf; fi
+if [[ -v USE_FDD_CU ]]; then ln -s $PREFIX/etc/cu.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_FDD_DU ]]; then ln -s $PREFIX/etc/du.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_FDD_MONO ]]; then ln -s $PREFIX/etc/enb.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_TDD_MONO ]]; then ln -s $PREFIX/etc/enb.tdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_FDD_FAPI_RCC ]]; then ln -s $PREFIX/etc/rcc.nfapi.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_FDD_RRU ]]; then ln -s $PREFIX/etc/rru.fdd.conf $PREFIX/etc/enb.conf; fi
+if [[ -v USE_TDD_RRU ]]; then ln -s $PREFIX/etc/rru.tdd.conf $PREFIX/etc/enb.conf; fi
 
 # Only this template will be manipulated
-CONFIG_FILES=`ls /opt/oai-enb/etc/enb.conf`
+CONFIG_FILES=`ls $PREFIX/etc/enb.conf || true`
 
 for c in ${CONFIG_FILES}; do
     # grep variable names (format: ${VAR}) from template to be rendered

docker/scripts/enb_parameters.yaml

@@ -159,6 +159,8 @@
       env: "@ENB_S1U_IP_ADDRESS@"
     - key: ENB_IPV4_ADDRESS_FOR_X2C
       env: "@ENB_X2_IP_ADDRESS@"
+    - key: rrc_inactivity_threshold
+      env: "@RRC_INACTIVITY_THRESHOLD@"
     - key: FLEXRAN_ENABLED
       env: "@FLEXRAN_ENABLED@"
     - key: FLEXRAN_INTERFACE_NAME
@@ -204,7 +206,7 @@
       env: "@F1_CU_IP_ADDRESS@"
       
   - filePrefix: "rcc.band7.tm1.nfapi"
-    outputfilename: "rcc.if4p5.enb.fdd.conf"
+    outputfilename: "rcc.nfapi.fdd.conf"
     config:
     - key: Active_eNBs
       env: "@ENB_NAME@"

docker/scripts/generateTemplate.py

@@ -35,11 +35,12 @@ def main():
   data = yaml.full_load(f)
   dir = os.listdir(f'{data[0]["paths"]["source_dir"]}')
 
-
   #identify configs, read and replace corresponding values
   for config in data[1]["configurations"]:
     filePrefix = config["filePrefix"]
     outputfilename = config["outputfilename"]
+    print('filePrefix = ' + filePrefix)
+    print('outputfilename = ' + outputfilename)
     for inputfile in dir:
       if inputfile.find(filePrefix) >=0:
         prefix_outputfile = {"cu": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}', 
@@ -48,7 +49,9 @@ def main():
                              "rru.tdd": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band7.tm1.25PRB.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
                              "enb.band40.tm1.25PRB.FairScheduler.usrpb210": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
-                             "rcc.band7.tm1.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}'
+                             "rcc.band7.tm1.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "ue.nfapi": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}',
+                             "ue_sim_ci": f'{data[0]["paths"]["dest_dir"]}/{outputfilename}'
                              }
         if filePrefix in prefix_outputfile:
           outputfile1 = prefix_outputfile[filePrefix]  
@@ -61,6 +64,9 @@ def main():
              open(outputfile1, mode='w') as outputfile:
           for line in inputfile:
             count = 0
+            if re.search(r'EHPLMN_LIST', line):
+              outputfile.write(line)
+              continue
             for key in config["config"]:
               if line.find(key["key"]) >= 0:
                 count += 1

docker/scripts/lte_ue_entrypoint.sh

+#!/bin/bash
+
+set -euo pipefail
+
+PREFIX=/opt/oai-lte-ue
+
+# Based another env var, pick one template to use
+if [[ -v USE_NFAPI ]]; then ln -s $PREFIX/etc/ue.nfapi.conf $PREFIX/etc/ue.conf; fi
+
+# Only this template will be manipulated and the USIM one!
+CONFIG_FILES=`ls $PREFIX/etc/ue.conf $PREFIX/etc/ue_usim.conf || true`
+
+for c in ${CONFIG_FILES}; do
+    # grep variable names (format: ${VAR}) from template to be rendered
+    VARS=$(grep -oP '@[a-zA-Z0-9_]+@' ${c} | sort | uniq | xargs)
+
+    # create sed expressions for substituting each occurrence of ${VAR}
+    # with the value of the environment variable "VAR"
+    EXPRESSIONS=""
+    for v in ${VARS}; do
+        NEW_VAR=`echo $v | sed -e "s#@##g"`
+        if [[ "${!NEW_VAR}x" == "x" ]]; then
+            echo "Error: Environment variable '${NEW_VAR}' is not set." \
+                "Config file '$(basename $c)' requires all of $VARS."
+            exit 1
+        fi
+        EXPRESSIONS="${EXPRESSIONS};s|${v}|${!NEW_VAR}|g"
+    done
+    EXPRESSIONS="${EXPRESSIONS#';'}"
+
+    # render template and inline replace config file
+    sed -i "${EXPRESSIONS}" ${c}
+done
+
+#now generate USIM files
+# At this point all operations will be run from $PREFIX!
+cd $PREFIX
+$PREFIX/bin/conf2uedata -c $PREFIX/etc/ue_usim.conf -o $PREFIX
+
+# Load the USRP binaries
+if [[ -v USE_B2XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t b2xx
+elif [[ -v USE_X3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t x3xx
+elif [[ -v USE_N3XX ]]; then
+    /usr/lib/uhd/utils/uhd_images_downloader.py -t n3xx
+fi
+
+# in case we have conf file, append
+new_args=()
+while [[ $# -gt 0 ]]; do
+  new_args+=("$1")
+  shift
+done
+if [[ -v USE_NFAPI ]]; then
+  new_args+=("-O")
+  new_args+=("$PREFIX/etc/ue.conf")
+fi
+
+echo "=================================="
+echo "== Starting LTE UE soft modem"
+if [[ -v USE_ADDITIONAL_OPTIONS ]]; then
+    echo "Additional option(s): ${USE_ADDITIONAL_OPTIONS}"
+    for word in ${USE_ADDITIONAL_OPTIONS}; do
+        new_args+=("$word")
+    done
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+else
+    echo "${new_args[@]}"
+    exec "${new_args[@]}"
+fi

docker/scripts/lte_ue_parameters.yaml

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+---
+- paths:
+    source_dir: "ci-scripts/conf_files/"
+    dest_dir: docker/etc
+    
+- configurations:
+  - filePrefix: ue.nfapi
+    outputfilename: "ue.nfapi.conf"
+    config:
+    - key: remote_n_address
+      env: "@ENB_IP_ADDRESS@"
+    - key: local_n_address
+      env: "@LTE_UE_IP_ADDRESS@"
+    - key: local_n_if_name
+      env: "@UE_NFAPI_IF_NAME@"
+

docker/scripts/lte_ue_sim_parameters.yaml

+#/*
+# * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+# * contributor license agreements.  See the NOTICE file distributed with
+# * this work for additional information regarding copyright ownership.
+# * The OpenAirInterface Software Alliance licenses this file to You under
+# * the OAI Public License, Version 1.1  (the "License"); you may not use this file
+# * except in compliance with the License.
+# * You may obtain a copy of the License at
+# *
+# *      http://www.openairinterface.org/?page_id=698
+# *
+# * Unless required by applicable law or agreed to in writing, software
+# * distributed under the License is distributed on an "AS IS" BASIS,
+# * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# * See the License for the specific language governing permissions and
+# * limitations under the License.
+# *-------------------------------------------------------------------------------
+# * For more information about the OpenAirInterface (OAI) Software Alliance:
+# *      contact@openairinterface.org
+# */
+
+---
+- paths:
+    source_dir: "openair3/NAS/TOOLS/"
+    dest_dir: docker/etc
+    
+- configurations:
+  - filePrefix: ue_sim_ci
+    outputfilename: "ue_usim.conf"
+    config:
+    - key: MNC
+      env: "@MNC@"
+    - key: MCC
+      env: "@MCC@"
+    - key: MSIN
+      env: "@SHORT_IMSI@"
+    - key: USIM_API_K
+      env: "@LTE_KEY@"
+    - key: OPC
+      env: "@OPC@"
+    - key: MSISDN
+      env: "@MSISDN@"
+    - key: HPLMN
+      env: "@HPLMN@"
+    - key: OPLMN_LIST
+      env: "@HPLMN@"
+

openair3/NAS/TOOLS/ue_sim_ci.conf

+# List of known PLMNS
+PLMN: {
+    PLMN0: {
+           FULLNAME="OpenAirInterface";
+           SHORTNAME="OAICN";
+           MNC="96";
+           MCC="208";
+    };
+};
+
+UE0:
+{
+    USER: {
+        IMEI="356113022094149";
+        MANUFACTURER="OAI";
+        MODEL="LTE SoftModem";
+        PIN="0000";
+    };
+
+    SIM: {
+        MSIN="0100001111";
+        USIM_API_K="8baf473f2f8fd09487cccbd7097c6862";
+        OPC="e734f8734007d6c5ce7a0508809e7e9c";
+        MSISDN="33611123456";
+    };
+
+    # Home PLMN Selector with Access Technology
+    HPLMN= "20896";
+
+    # User controlled PLMN Selector with Access Technology
+    UCPLMN_LIST = ();
+
+    # Operator PLMN List
+    OPLMN_LIST = ("20896");
+
+    # Operator controlled PLMN Selector with Access Technology
+    OCPLMN_LIST = ();
+
+    # Forbidden plmns
+    FPLMN_LIST = ();
+
+    # Equivalent home plmns
+    EHPLMN_LIST = ();
+
+};