Skip to content

O
OpenXG-RAN
Commit 62009b9a authored by gauthier's avatar gauthier
Browse files
Options

Sync for home

parent 5d4de8bd
Hide whitespace changes
Inline Side-by-side
Showing with 4766 additions and 59 deletions
openair3/TEST/EPC_TEST/TEST_1MME_1ENB_1UE_ATTACH_GUTI/attach_complete.pdml 0 → 100644
View file @ 62009b9a
This source diff could not be displayed because it is too large. You can view the blob instead.
openair3/TEST/EPC_TEST/TEST_1MME_1ENB_1UE_ATTACH_GUTI/enb.band7.tm1.usrpb210.epc.local.conf 0 → 100644
View file @ 62009b9a
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "95";
////////// Physical parameters:
component_carriers = (
{
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 120;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -26;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -108;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.188.2.2";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "tun2";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.188.2.2/24";
ENB_INTERFACE_NAME_FOR_S1U = "lo";
ENB_IPV4_ADDRESS_FOR_S1U = "127.0.0.1/24";
ENB_PORT_FOR_S1U = 2153; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
gtpu_log_level ="info";
gtpu_log_verbosity ="medium";
udp_log_level ="info";
udp_log_verbosity ="medium";
};
}
);
openair3/TEST/EPC_TEST/generate_scenario.c
View file @ 62009b9a
......@@ -43,6 +43,9 @@
#include <unistd.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <libxml/xmlmemory.h>
#include <libxml/debugXML.h>
#include <libxml/HTMLtree.h>
......@@ -95,11 +98,64 @@
#define ENB_CONFIG_MAX_XSLT_PARAMS 64
Enb_properties_array_t g_enb_properties[2];
char *g_test_dir = "."; // default value
char *g_pdml_in_basename = "trace.pdml"; // default value
char *g_openair_dir = NULL;
char *g_test_dir = NULL;
char *g_pdml_in_origin = NULL;
char *g_generic_scenario = NULL;
extern int xmlLoadExtDtdDefaultValue;
#define GENERATE_PDML_FILE 1
#define GENERATE_GENERIC_SCENARIO 2
#define GENERATE_DEDICATED_SCENARIO 4
#define GS_IS_FILE 1
#define GS_IS_DIR 2
//------------------------------------------------------------------------------
// test if file exist in current directory
int is_file_exists( const char const * file_nameP, const char const *file_roleP)
{
struct stat s;
int err = stat(file_nameP, &s);
if(-1 == err) {
if(ENOENT == errno) {
fprintf(stderr, "Please provide a valid %s, %s does not exist\n", file_roleP, file_nameP);
} else {
perror("stat");
exit(1);
}
} else {
if(S_ISREG(s.st_mode)) {
return GS_IS_FILE;
} else if(S_ISDIR(s.st_mode)) {
return GS_IS_DIR;
} else {
fprintf(stderr, "Please provide a valid test %s, %s exists but is not found valid\n", file_roleP, file_nameP);
}
}
return 0;
}
//------------------------------------------------------------------------------
void generate_scenario(const char const * pdml_in_basenameP)
// return number of splitted items
int split_path( char * pathP, char *** resP)
{
char * saveptr1;
char * p = strtok_r (pathP, "/", &saveptr1);
int n_spaces = 0;
/// split string and append tokens to 'res'
while (p) {
*resP = realloc (*resP, sizeof (char*) * ++n_spaces);
AssertFatal (*resP, "realloc failed");
(*resP)[n_spaces-1] = p;
p = strtok_r (NULL, "/", &saveptr1);
}
return n_spaces;
}
//------------------------------------------------------------------------------
void generate_generic_scenario(const char const * test_nameP, const char const * pdml_in_basenameP)
//------------------------------------------------------------------------------
{
//int fd_pdml_in;
......@@ -107,33 +163,58 @@ void generate_scenario(const char const * pdml_in_basenameP)
xmlDocPtr doc, res;
const char *params[ENB_CONFIG_MAX_XSLT_PARAMS];
int nb_params = 0;
int i,j;
char astring[1024];
struct in_addr addr;
if (chdir(g_test_dir) == 0) {
printf( "working in %s directory\n", g_test_dir);
/*fd_pdml_in = open(pdml_in_basenameP, O_RDONLY);
AssertFatal (fd_pdml_in > 0,
"Error while opening %s file in directory %s\n",
pdml_in_basenameP,
g_test_dir);*/
params[nb_params] = NULL;
xmlSubstituteEntitiesDefault(1);
xmlLoadExtDtdDefaultValue = 1;
cur = xsltParseStylesheetFile("enb_config.xsl");
doc = xmlParseFile(pdml_in_basenameP);
res = xsltApplyStylesheet(cur, doc, params);
xsltSaveResultToFile(stdout, res, cur);
xsltFreeStylesheet(cur);
xmlFreeDoc(res);
xmlFreeDoc(doc);
xsltCleanupGlobals();
xmlCleanupParser();
memset(astring, 0, sizeof(astring));
if (getcwd(astring, sizeof(astring)) != NULL) {
fprintf(stdout, "working in %s directory\n", astring);
} else {
printf("Error: chdir %s returned %s\n", g_test_dir, strerror(errno));
exit(-1);
perror("getcwd() error");
exit(1);
}
memset(astring, 0, sizeof(astring));
strcat(astring, g_openair_dir);
strcat(astring, "/openair3/TEST/EPC_TEST/generic_scenario.xsl");
xmlSubstituteEntitiesDefault(1);
xmlLoadExtDtdDefaultValue = 1;
cur = xsltParseStylesheetFile(astring);
doc = xmlParseFile(pdml_in_basenameP);
params[nb_params++] = "test_name";
sprintf(astring, "\"%s\"", test_nameP);
params[nb_params++] = strdup(astring);
for (i = 0; i < g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD].number; i++) {
// eNB S1-C IPv4 address
sprintf(astring, "enb_s1c%d", i);
params[nb_params++] = strdup(astring);
addr.s_addr = g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD].properties[i]->enb_ipv4_address_for_S1_MME;
sprintf(astring, "\"%s\"", inet_ntoa(addr));
params[nb_params++] = strdup(astring);
// MME S1-C IPv4 address
for (j = 0; j < g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD].properties[i]->nb_mme; j++) {
sprintf(astring, "mme_s1c%d_%d", i, j);
params[nb_params++] = strdup(astring);
AssertFatal (g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD].properties[i]->mme_ip_address[j].ipv4_address,
"Only support MME IPv4 address\n");
sprintf(astring, "\"%s\"", g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD].properties[i]->mme_ip_address[j].ipv4_address);
params[nb_params++] = strdup(astring);
}
}
params[nb_params] = NULL;
res = xsltApplyStylesheet(cur, doc, params);
xsltSaveResultToFile(stdout, res, cur);
xsltFreeStylesheet(cur);
xmlFreeDoc(res);
xmlFreeDoc(doc);
xsltCleanupGlobals();
xmlCleanupParser();
}
//------------------------------------------------------------------------------
......@@ -403,14 +484,77 @@ static void usage (
{
fprintf (stdout, "Please report any bug to: openair4g-devel@lists.eurecom.fr\n\n");
fprintf (stdout, "Usage: %s [options]\n\n", argv[0]);
fprintf (stdout, "Mandatory options:\n");
fprintf (stdout, "\t-t | --test-dir <dir> Directory where a set of files related to a particular test are located\n");
fprintf (stdout, "\n");
fprintf (stdout, "Available options:\n");
fprintf (stdout, "\t--help, -h Print this help and return\n");
fprintf (stdout, "\t--new-enb-conf-file <file>\n");
fprintf (stdout, " Provide an updated eNB config file for generating a copy of the original test\n");
fprintf (stdout, " This option is set as many times as there are some eNB config files in the original test\n");
fprintf (stdout, "\t--old-enb-conf-file <file>\n");
fprintf (stdout, " Provide the old eNB config file for generating a copy of the original test\n");
fprintf (stdout, " This option is set as many times as there are some eNB config files in the original test\n");
fprintf (stdout, "\t-h | --help Print this help and return\n");
fprintf (stdout, "\t-n | --new-enb-conf-file <file> Provide an updated eNB config file for generating a copy of the original test\n");
fprintf (stdout, " This option is set as many times as there are some eNB config files in the original test\n");
fprintf (stdout, "\t-o | --old-enb-conf-file <file> Provide the old eNB config file for generating a copy of the original test\n");
fprintf (stdout, " This option is set as many times as there are some eNB config files in the original test\n");
fprintf (stdout, "\t-p | --pdml <file> File name (with no path) of an original scenario that has to be reworked (IP addresses) with new testbed\n");
fprintf (stdout, "\t-s | --scenario-generic <file> File name (with no path) of a scenario that has to be customized (IP addresses) with new testbed\n");
fprintf (stdout, "\n");
fprintf (stdout, "\n");
fprintf (stdout, "Example of generate_scenario use cases: \n");
fprintf (stdout, "\n");
fprintf (stdout, " Case 1: generate a generix xml scenario from a captured pcap file: \n");
fprintf (stdout, " +---------------------+ \n");
fprintf (stdout, " |captured pcap-ng file| \n");
fprintf (stdout, " +----------+----------+ \n");
fprintf (stdout, " |\n");
fprintf (stdout, " mme_test_s1_pcap2pdml \n");
fprintf (stdout, " |\n");
fprintf (stdout, " +--------V----------+ +------------------------+\n");
fprintf (stdout, " |'pdml-in-orig' file| |'old-enb-conf-file' file|\n");
fprintf (stdout, " +--------+----------+ +------------+-----------+\n");
fprintf (stdout, " | |\n");
fprintf (stdout, " +----------------------------+\n");
fprintf (stdout, " |\n");
fprintf (stdout, " generate_scenario -t <dir> -p <file> -o <file> \n");
fprintf (stdout, " |\n");
fprintf (stdout, " +------------V--------------+\n");
fprintf (stdout, " +'xml-scenario-generic' file|\n");
fprintf (stdout, " +---------------------------+\n");
fprintf (stdout, "\n");
fprintf (stdout, "\n");
fprintf (stdout, " Case 2: generate a dedicated xml scenario from generic xml scenario:\n");
fprintf (stdout, "\n");
fprintf (stdout, " +---------------------------+ +------------------------+\n");
fprintf (stdout, " |'xml-scenario-generic' file| |'new-enb-conf-file' file|\n");
fprintf (stdout, " +--------+------------------+ +------------+-----------+\n");
fprintf (stdout, " | |\n");
fprintf (stdout, " +--------------------+---------------+\n");
fprintf (stdout, " |\n");
fprintf (stdout, " generate_scenario -t <dir> -s <file> -n <file> \n");
fprintf (stdout, " |\n");
fprintf (stdout, " +--------------V--------------+\n");
fprintf (stdout, " +'xml-scenario-dedicated' file|\n");
fprintf (stdout, " +-----------------------------+\n");
fprintf (stdout, "\n");
fprintf (stdout, "\n");
fprintf (stdout, " Case 3 = case 1 + case 2: generate a dedicated xml scenario from a captured pcap file:\n");
fprintf (stdout, "\n");
fprintf (stdout, " +---------------------+\n");
fprintf (stdout, " |captured pcap-ng file|\n");
fprintf (stdout, " +----------+----------+\n");
fprintf (stdout, " |\n");
fprintf (stdout, " mme_test_s1_pcap2pdml \n");
fprintf (stdout, " |\n");
fprintf (stdout, " +------------------------+ +--------V----------+ +------------------------+\n");
fprintf (stdout, " |'old-enb-conf-file' file| |'pdml-in-orig' file| |'new-enb-conf-file' file|\n");
fprintf (stdout, " +------------+-----------+ +--------+----------+ +------------+-----------+\n");
fprintf (stdout, " | | |\n");
fprintf (stdout, " +----------------------+-------------------------+\n");
fprintf (stdout, " |\n");
fprintf (stdout, " V\n");
fprintf (stdout, " generate_scenario -t <dir> -p <file> -o <file> -n <file> \n");
fprintf (stdout, " | ^ |\n");
fprintf (stdout, " | | |\n");
fprintf (stdout, " +--------------V------------+ +------------V----------------+\n");
fprintf (stdout, " |'xml-scenario-generic' file| |'xml-scenario-dedicated' file|\n");
fprintf (stdout, " +---------------------------+ +-----------------------------+\n");
}
......@@ -422,20 +566,29 @@ config_parse_opt_line (
//------------------------------------------------------------------------------
{
int option;
char *enb_config_file_name = NULL;
int rv = 0;
char *new_enb_config_file_name = NULL;
char *old_enb_config_file_name = NULL;
char *pdml_in_file_name = NULL;
char *generic_scenario_file_name = NULL;
char *test_dir_name = NULL;
enum long_option_e {
LONG_OPTION_START = 0x100, /* Start after regular single char options */
LONG_OPTION_NEW_ENB_CONF_FILE,
LONG_OPTION_OLD_ENB_CONF_FILE,
LONG_OPTION_PDML_IN_BASENAME,
LONG_OPTION_PDML,
LONG_OPTION_TEST_DIR,
LONG_OPTION_SCENARIO_GENERIC,
LONG_OPTION_HELP,
};
static struct option long_options[] = {
{"old-enb-conf-file", required_argument, 0, LONG_OPTION_OLD_ENB_CONF_FILE},
{"new-enb-conf-file", required_argument, 0, LONG_OPTION_NEW_ENB_CONF_FILE},
{"pdml_in_basename", required_argument, 0, LONG_OPTION_PDML_IN_BASENAME},
{"pdml ", required_argument, 0, LONG_OPTION_PDML},
{"test-dir", required_argument, 0, LONG_OPTION_TEST_DIR},
{"scenario-generic", required_argument, 0, LONG_OPTION_SCENARIO_GENERIC},
{"help", required_argument, 0, LONG_OPTION_HELP},
{NULL, 0, NULL, 0}
};
......@@ -443,32 +596,53 @@ config_parse_opt_line (
/*
* Parsing command line
*/
while ((option = getopt_long (argc, argv, "hp:n:o", long_options, NULL)) != -1) {
while ((option = getopt_long (argc, argv, "hp:n:o:s:t", long_options, NULL)) != -1) {
switch (option) {
case LONG_OPTION_OLD_ENB_CONF_FILE:
case 'o':
if (optarg) {
enb_config_file_name = optarg;
printf("Old eNB config file name is %s\n", enb_config_file_name);
enb_config_init(enb_config_file_name, ENB_CONFIG_PROPERTIES_INDEX_OLD);
g_test_dir = strdup(dirname(enb_config_file_name));
old_enb_config_file_name = optarg;
printf("Old eNB config file name is %s\n", old_enb_config_file_name);
rv |= GENERATE_GENERIC_SCENARIO;
}
break;
case LONG_OPTION_NEW_ENB_CONF_FILE:
case 'n':
if (optarg) {
enb_config_file_name = optarg;
printf("New eNB config file name is %s\n", enb_config_file_name);
enb_config_init(enb_config_file_name, ENB_CONFIG_PROPERTIES_INDEX_NEW);
new_enb_config_file_name = optarg;
printf("New eNB config file name is %s\n", new_enb_config_file_name);
rv |= GENERATE_DEDICATED_SCENARIO;
}
break;
case LONG_OPTION_PDML_IN_BASENAME:
case LONG_OPTION_PDML:
case 'p':
if (optarg) {
g_pdml_in_basename = strdup(optarg);
printf("PDML input file name is %s\n", g_pdml_in_basename);
pdml_in_file_name = strdup(optarg);
printf("PDML input file name is %s\n", pdml_in_file_name);
rv |= GENERATE_GENERIC_SCENARIO;
}
break;
case LONG_OPTION_TEST_DIR:
case 't':
if (optarg) {
test_dir_name = strdup(optarg);
if (is_file_exists(test_dir_name, "test dirname") != GS_IS_DIR) {
fprintf(stderr, "Please provide a valid test dirname, %s is not a valid directory name\n", test_dir_name);
exit(1);
}
printf("Test dir name is %s\n", test_dir_name);
}
break;
case LONG_OPTION_SCENARIO_GENERIC:
case 's':
if (optarg) {
generic_scenario_file_name = strdup(optarg);
printf("Generic XML scenario input file name is %s\n", generic_scenario_file_name);
rv |= GENERATE_DEDICATED_SCENARIO;
}
break;
......@@ -479,18 +653,77 @@ config_parse_opt_line (
exit (0);
}
}
return 0;
if (NULL == test_dir_name) {
fprintf(stderr, "Please provide a valid test dirname\n");
exit(1);
}
g_test_dir = test_dir_name; test_dir_name = NULL;
if (chdir(g_test_dir) != 0) {
fprintf(stderr, "Error: chdir %s returned %s\n", g_test_dir, strerror(errno));
exit(1);
}
if (rv & GENERATE_GENERIC_SCENARIO) {
if (NULL == old_enb_config_file_name) {
fprintf(stderr, "Error: please provide the original eNB config file name that should be in %s\n", g_test_dir);
}
if (is_file_exists(old_enb_config_file_name, "Old eNB config file") != GS_IS_FILE) {
fprintf(stderr, "Error: original eNB config file name %s is not found in dir %s\n", old_enb_config_file_name, g_test_dir);
}
enb_config_display(ENB_CONFIG_PROPERTIES_INDEX_OLD);
enb_config_init(old_enb_config_file_name, ENB_CONFIG_PROPERTIES_INDEX_OLD);
if (NULL == pdml_in_file_name) {
fprintf(stderr, "Error: please provide the PDML file name that should be in %s\n", g_test_dir);
}
if (is_file_exists(pdml_in_file_name, "PDML file") != GS_IS_FILE) {
fprintf(stderr, "Error: PDML file name %s is not found in dir %s\n", pdml_in_file_name, g_test_dir);
}
g_pdml_in_origin = pdml_in_file_name; pdml_in_file_name = NULL;
}
if (rv & GENERATE_DEDICATED_SCENARIO) {
if (NULL == new_enb_config_file_name) {
fprintf(stderr, "Error: please provide the new eNB config file name that should be in %s\n", g_test_dir);
}
if (is_file_exists(new_enb_config_file_name, "New eNB config file") != GS_IS_FILE) {
fprintf(stderr, "Error: New eNB config file name %s is not found in dir %s\n", new_enb_config_file_name, g_test_dir);
}
enb_config_display(ENB_CONFIG_PROPERTIES_INDEX_NEW);
enb_config_init(new_enb_config_file_name, ENB_CONFIG_PROPERTIES_INDEX_NEW);
if (NULL == generic_scenario_file_name) {
fprintf(stderr, "Error: please provide the Generic scenario file name that should be in %s\n", g_test_dir);
}
if (is_file_exists(generic_scenario_file_name, "Generic scenario file") != GS_IS_FILE) {
fprintf(stderr, "Error: Generic scenario file name %s is not found in dir %s\n", generic_scenario_file_name, g_test_dir);
}
g_generic_scenario = generic_scenario_file_name; generic_scenario_file_name = NULL;
}
return rv;
}
//------------------------------------------------------------------------------
int main( int argc, char **argv )
//------------------------------------------------------------------------------
{
int actions = 0;
g_openair_dir = getenv("OPENAIR_DIR");
if (NULL == g_openair_dir) {
fprintf(stderr, "Error: Could not get OPENAIR_DIR environment variable\n");
exit(1);
}
memset((char*) &g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD], 0 , sizeof(g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_OLD]));
memset((char*) &g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_NEW], 0 , sizeof(g_enb_properties[ENB_CONFIG_PROPERTIES_INDEX_NEW]));
config_parse_opt_line (argc, argv); //Command-line options
enb_config_display(ENB_CONFIG_PROPERTIES_INDEX_OLD);
enb_config_display(ENB_CONFIG_PROPERTIES_INDEX_NEW);
generate_scenario(g_pdml_in_basename);
actions = config_parse_opt_line (argc, argv); //Command-line options
if (actions & GENERATE_GENERIC_SCENARIO) {
generate_generic_scenario(g_test_dir, g_pdml_in_origin);
}
/*if (actions & GENERATE_DEDICATED_SCENARIO) {
generate_dedicated_scenario(g_test_dir, g_pdml_in_origin);
}*/
return 0;
}
openair3/TEST/EPC_TEST/generic_scenario.xsl 0 → 100644
View file @ 62009b9a
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns="http://www.w3.org/TR/xhtml1/strict">
<xsl:output
method="xml"
indent="yes"
encoding="iso-8859-1"
/>
<xsl:strip-space elements="proto field"/>
<scenario name="{$test_name}">
<xsl:template match="proto[@name='frame']">
<DEBUG_FRAME>
<xsl:variable name="time_relative" select="field[@name='frame.time_relative']/@show"/>
<xsl:variable name="ip" select="proto[@name='ip']"/>
<xsl:variable name="ip.src" select="$ip/field[@name='ip.src']/@show"/>
<xsl:variable name="ip.dst" select="$ip/field[@name='ip.dst']/@show"/>
<xsl:for-each select="$ip/proto[@name='sctp']">
<xsl:variable name="sctp.data_sid" select="./field[@name='sctp.data_sid']/@show"/>
<xsl:variable name="sctp.srcport" select="./field[@name='sctp.srcport']/@show"/>
<xsl:variable name="sctp.dstport" select="./field[@name='sctp.dstport']/@show"/>
<xsl:variable name="sctp.data_ssn" select="./field[@name='sctp.data_ssn']/@show"/>
<xsl:variable name="sctp.data_payload_proto_id" select="./field[@name='sctp.data_payload_proto_id']/@show"/>
<xsl:for-each select="./proto[@name='s1ap']">
<payload name="{ip_dst}">
<frame.time_relative value="{$time_relative}"/>
<ip.dst value="{$ip.dst}"/>
<ip.src value="{$ip.src}"/>
<sctp.data_sid value="{$sctp.data_sid}"/>
<sctp.srcport value="{$sctp.srcport}"/>
<sctp.dstport value="{$sctp.dstport}"/>
<sctp.data_ssn value="{$sctp.data_ssn}"/>
<sctp.data_payload_proto_id value="{$sctp.data_payload_proto_id}"/>
<xsl:copy-of select="node()"/>
</payload>
</xsl:for-each>
</xsl:for-each>
</DEBUG_FRAME>
</xsl:template>
</scenario>
</xsl:stylesheet>
openair3/TEST/EPC_TEST/mme_test_s1_pcap2pdml
View file @ 62009b9a
......@@ -35,14 +35,25 @@ packets = orig_dom.getElementsByTagName("packet")
for packet in packets:
found_sctp = False
found_s1ap = False
sctp_node = None
frame_node = None
ip_node = None
protos = packet.getElementsByTagName("proto")
for proto in protos:
attrs = proto.attributes
urlnode = attrs['name']
if urlnode.nodeValue == 'sctp':
if urlnode.nodeValue == 'frame':
frame_node = proto
elif urlnode.nodeValue == 'ip':
frame_node.appendChild(proto)
ip_node = proto
elif urlnode.nodeValue == 'sctp':
found_sctp = True
ip_node.appendChild(proto)
sctp_node = proto
elif urlnode.nodeValue == 's1ap':
found_s1ap = True
sctp_node.appendChild(proto)
elif urlnode.nodeValue == 'geninfo':
packet.removeChild(proto)
elif urlnode.nodeValue == 'eth':
......@@ -54,20 +65,21 @@ for packet in packets:
#####################
# dom to xml string
#####################
filtered_pdml_string = orig_dom.toxml()
filtered_pdml_string = orig_dom.toprettyxml(indent=" ")
cleaned_pdml_string = ""
#####################
# remove blank lines in xml string
#####################
lines = filtered_pdml_string.splitlines()
for line in lines:
if line[:-1]:
cleaned_pdml_string += line + '\r\n'
if len(line.strip()):
if line[:-1]:
cleaned_pdml_string += line + '\r\n'
#print "'%s'" % cleaned_pdml_string
#####################
# write pdml string to pdml file
#####################
out_pdml_file_name = os.path.dirname(orig_pcap_file_name) + os.path.splitext(os.path.basename(orig_pcap_file_name))[0] + '.pdml'
out_pdml_file_name = os.path.dirname(orig_pcap_file_name) + '/' + os.path.splitext(os.path.basename(orig_pcap_file_name))[0] + '.pdml'
out_file = open(out_pdml_file_name, "w")
out_file.write(cleaned_pdml_string)
out_file.close()
......@@ -86,7 +98,7 @@ filtered_html_string = etree.tostring(trans_root)
#####################
# write html string to html file
#####################
out_html_file_name = os.path.dirname(orig_pcap_file_name) + os.path.splitext(os.path.basename(orig_pcap_file_name))[0] + '.html'
out_html_file_name = os.path.dirname(orig_pcap_file_name) + '/' +os.path.splitext(os.path.basename(orig_pcap_file_name))[0] + '.html'
out_file = open(out_html_file_name, "w")
out_file.write(filtered_html_string)
out_file.close()
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment