Add Quectel/F1+E1 test

ci-scripts/conf_files/gnb-cucp.sa.f1.quectel.conf

+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+Num_Threads_PUSCH = 8;
+sa = 1;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_CU_ID = 0xe00;
+
+#     cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+
+    nr_cellid = 12345678L;
+    force_256qam_off = 1;
+
+    tr_s_preference = "f1";
+
+    local_s_if_name = "eth0";
+    local_s_address = "192.168.68.194";
+    remote_s_address = "192.168.68.195";
+    local_s_portc   = 501;
+    local_s_portd   = 2153;
+    remote_s_portc  = 500;
+    remote_s_portd  = 2153;
+    ssb_SubcarrierOffset                                      = 0;
+    min_rxtxtime                                              = 6;
+
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                             = 641280;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640008;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 106;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=27,L=48 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                               = 28875; # 6366 12925 12956 28875 12952
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialDLBWPsubcarrierSpacing                                   = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                              = 11;
+        initialDLBWPsearchSpaceZero                                     = 0;
+
+  #uplinkConfigCommon
+     #frequencyInfoUL
+      ul_frequencyBand                                              = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                             = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      ul_subcarrierSpacing                                          = 1;
+      ul_carrierBandwidth                                           = 106;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                            = 28875;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+        initialULBWPsubcarrierSpacing                               = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -96;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 14;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #
+        msg1_SubcarrierSpacing                                      = 1,
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 1;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
+      referenceSubcarrierSpacing                                    = 1;
+      # pattern1
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 6;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+      ssPBCH_BlockPower                                             = -25;
+  }
+
+  );
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// AMF parameters:
+    amf_ip_address      = ( { ipv4       = "172.21.16.137";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    E1_INTERFACE =
+    (
+      {
+        type = "cp";
+        ipv4_cucp = "192.168.68.194";
+        port_cucp = 38462;
+        ipv4_cuup = "192.168.68.196";
+        port_cuup = 38462;
+      }
+    )
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.68.194";
+    };
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config : {
+  global_log_level = "info";
+};

ci-scripts/conf_files/gnb-cuup.sa.f1.quectel.conf

+Active_gNBs = ( "gNB-OAI");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+sa = 1;
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_CU_ID = 0xe00;
+
+#     cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-OAI";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+    plmn_list = ({ mcc = 222; mnc = 01; mnc_length = 2; snssaiList = ({ sst = 1, sd = 0xffffff }) });
+
+
+    tr_s_preference = "f1";
+
+    local_s_if_name = "lo";
+    local_s_address = "192.168.68.196";
+    remote_s_address = "192.168.68.195";
+    local_s_portc   = 501;
+    local_s_portd   = 2153;
+    remote_s_portc  = 500;
+    remote_s_portd  = 2153;
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+    E1_INTERFACE =
+    (
+      {
+        type = "up";
+        ipv4_cucp = "192.168.68.194";
+        ipv4_cuup = "192.168.68.196";
+      }
+    )
+
+    NETWORK_INTERFACES :
+    {
+        GNB_INTERFACE_NAME_FOR_NG_AMF            = "demo-oai";
+        GNB_IPV4_ADDRESS_FOR_NG_AMF              = "192.168.68.196";
+        GNB_INTERFACE_NAME_FOR_NGU               = "demo-oai";
+        GNB_IPV4_ADDRESS_FOR_NGU                 = "192.168.68.196";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+    };
+  }
+);
+
+security = {
+  # preferred ciphering algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nea0, nea1, nea2, nea3
+  ciphering_algorithms = ( "nea0" );
+
+  # preferred integrity algorithms
+  # the first one of the list that an UE supports in chosen
+  # valid values: nia0, nia1, nia2, nia3
+  integrity_algorithms = ( "nia2", "nia0" );
+
+  # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
+  # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
+  drb_ciphering = "yes";
+  drb_integrity = "no";
+};
+
+log_config: {
+  global_log_level = "info";
+};

ci-scripts/yaml_files/sa_e1_b200_gnb/docker-compose.yml

+version: '3.8'
+
+services:
+    gnb_cucp:
+        image: oai-gnb:latest
+        privileged: true
+        container_name: sa-cucp-gnb
+        environment:
+            USE_ADDITIONAL_OPTIONS: --sa --log_config.global_log_options level,nocolor,time,line_num,function
+        volumes:
+            - ../../conf_files/gnb-cucp.sa.f1.quectel.conf:/opt/oai-gnb/etc/gnb.conf
+        networks:
+            public_net:
+                ipv4_address: 192.168.68.194
+        healthcheck:
+            # pgrep does NOT work
+            test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+
+    gnb_cuup:
+        image: oai-nr-cuup:latest
+        privileged: true
+        container_name: sa-cuup-gnb
+        environment:
+            USE_ADDITIONAL_OPTIONS: --sa --log_config.global_log_options level,nocolor,time,line_num,function
+        volumes:
+            - ../../conf_files/gnb-cuup.sa.f1.quectel.conf:/opt/oai-gnb/etc/gnb.conf
+        networks:
+            public_net:
+                ipv4_address: 192.168.68.196
+        healthcheck:
+            # pgrep does NOT work
+            test: /bin/bash -c "ps aux | grep -v grep | grep -c nr-cuup"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+
+    gnb_du_tdd:
+        image: oai-gnb:latest
+        privileged: true
+        container_name: sa-du-b200-gnb
+        environment:
+            USE_B2XX: 'yes'
+            USE_ADDITIONAL_OPTIONS: --sa --RUs.[0].sdr_addrs serial=30C51D4 --continuous-tx -E --log_config.global_log_options level,nocolor,time,line_num,function --gNBs.[0].min_rxtxtime 2 --gNBs.[0].do_CSIRS 1 --gNBs.[0].do_SRS 1 --RUs.[0].att_rx 14 --RUs.[0].att_tx 14
+        volumes:
+            - ../../conf_files/gnb-du.sa.band78.106prb.usrpb200.conf:/opt/oai-gnb/etc/gnb.conf
+            - /dev:/dev
+        networks:
+            public_net:
+                ipv4_address: 192.168.68.195
+        #entrypoint: /bin/bash -c "sleep infinity"
+        healthcheck:
+            # pgrep does NOT work
+            test: /bin/bash -c "ps aux | grep -v grep | grep -c softmodem"
+            interval: 10s
+            timeout: 5s
+            retries: 5
+
+networks:
+    public_net:
+        name: sa-b200-gnb-net
+        ipam:
+            config:
+                - subnet: 192.168.68.192/26
+        driver_opts:
+            com.docker.network.bridge.name: "sa-gnb-net"