Commit 7e560fbd authored by Raymond Knopp's avatar Raymond Knopp

modifications for nr-uesoftmodem with RRC configuration

parent 303bdc80
......@@ -1319,6 +1319,7 @@ set(PHY_SRC_UE
set(PHY_NR_SRC_COMMON
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_prach_common.c
${OPENAIR1_DIR}/PHY/NR_TRANSPORT/nr_dci_tools_common.c
)
set(PHY_NR_SRC
......@@ -2467,6 +2468,7 @@ add_executable(nr-uesoftmodem
${OPENAIR1_DIR}/SIMULATION/TOOLS/taus.c
${OPENAIR_TARGETS}/ARCH/COMMON/common_lib.c
${OPENAIR2_DIR}/RRC/NAS/nas_config.c
${OPENAIR2_DIR}/LAYER2/NR_MAC_gNB/nr_mac_common.c
${OPENAIR1_DIR}/SIMULATION/ETH_TRANSPORT/netlink_init.c
${OPENAIR3_DIR}/NAS/UE/nas_ue_task.c
${OPENAIR_DIR}/common/utils/utils.c
......
......@@ -392,7 +392,7 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
scheduled_response.ul_config->sfn_slot = NR_UPLINK_SLOT;
scheduled_response.ul_config->number_pdus = 1;
scheduled_response.ul_config->ul_config_list[0].pdu_type = FAPI_NR_UL_CONFIG_TYPE_ULSCH;
scheduled_response.ul_config->ul_config_list[0].pdu_type = FAPI_NR_UL_CONFIG_TYPE_PUSCH;
scheduled_response.ul_config->ul_config_list[0].ulsch_config_pdu.rnti = n_rnti;
scheduled_response.ul_config->ul_config_list[0].ulsch_config_pdu.ulsch_pdu_rel15.number_rbs = nb_rb;
scheduled_response.ul_config->ul_config_list[0].ulsch_config_pdu.ulsch_pdu_rel15.start_rb = start_rb;
......@@ -409,7 +409,7 @@ void processSlotRX( PHY_VARS_NR_UE *UE, UE_nr_rxtx_proc_t *proc) {
phy_procedures_slot_parallelization_nrUE_RX( UE, proc, 0, 0, 1, UE->mode, no_relay, NULL );
#else
uint64_t a=rdtsc();
phy_procedures_nrUE_RX( UE, proc, 0, 1, UE->mode, scheduled_response.dl_config);
phy_procedures_nrUE_RX( UE, proc, 0, 1, UE->mode);
LOG_D(PHY,"phy_procedures_nrUE_RX: slot:%d, time %lu\n", proc->nr_tti_rx, (rdtsc()-a)/3500);
//printf(">>> nr_ue_pdcch_procedures ended\n");
#endif
......@@ -821,17 +821,6 @@ void init_NR_UE(int nb_inst) {
nr_l2_init_ue();
mac_inst = get_mac_inst(inst);
mac_inst->if_module = UE->if_inst;
// Initial bandwidth part configuration -- full carrier bandwidth
mac_inst->initial_bwp_dl.bwp_id = 0;
mac_inst->initial_bwp_dl.location = 0;
mac_inst->initial_bwp_dl.scs = UE->frame_parms.subcarrier_spacing;
mac_inst->initial_bwp_dl.N_RB = UE->frame_parms.N_RB_DL;
mac_inst->initial_bwp_dl.cyclic_prefix = UE->frame_parms.Ncp;
mac_inst->initial_bwp_ul.bwp_id = 0;
mac_inst->initial_bwp_ul.location = 0;
mac_inst->initial_bwp_ul.scs = UE->frame_parms.subcarrier_spacing;
mac_inst->initial_bwp_ul.N_RB = UE->frame_parms.N_RB_UL;
mac_inst->initial_bwp_ul.cyclic_prefix = UE->frame_parms.Ncp;
LOG_I(PHY,"Intializing UE Threads for instance %d (%p,%p)...\n",inst,PHY_vars_UE_g[inst],PHY_vars_UE_g[inst][0]);
threadCreate(&threads[inst], UE_thread, (void *)UE, "UEthread", -1, OAI_PRIORITY_RT_MAX);
......
......@@ -719,10 +719,6 @@ int main( int argc, char **argv ) {
PHY_vars_UE_g[0][CC_id] = init_nr_ue_vars(frame_parms[CC_id], 0,abstraction_flag);
UE[CC_id] = PHY_vars_UE_g[0][CC_id];
if (phy_test==1)
UE[CC_id]->mac_enabled = 0;
else
UE[CC_id]->mac_enabled = 1;
UE[CC_id]->UE_scan = UE_scan;
......@@ -732,13 +728,6 @@ int main( int argc, char **argv ) {
UE[CC_id]->no_timing_correction = UE_no_timing_correction;
printf("UE[%d]->mode = %d\n",CC_id,mode);
for (uint8_t i=0; i<RX_NB_TH_MAX; i++) {
if (UE[CC_id]->mac_enabled == 1)
UE[CC_id]->pdcch_vars[i][0]->crnti = 0x1234;
else
UE[CC_id]->pdcch_vars[i][0]->crnti = 0x1235;
}
UE[CC_id]->rx_total_gain_dB = (int)rx_gain[CC_id][0] + rx_gain_off;
UE[CC_id]->tx_power_max_dBm = tx_max_power[CC_id];
......
......@@ -118,29 +118,6 @@ void nr_fill_cce_list(PHY_VARS_gNB *gNB, uint16_t n_shift, uint8_t m) {
*/
void get_coreset_rballoc(uint8_t *FreqDomainResource,int *n_rb,int *rb_offset) {
uint8_t count=0, start=0, start_set=0;
uint64_t bitmap = (((uint64_t)FreqDomainResource[0])<<37)|
(((uint64_t)FreqDomainResource[1])<<29)|
(((uint64_t)FreqDomainResource[2])<<21)|
(((uint64_t)FreqDomainResource[3])<<13)|
(((uint64_t)FreqDomainResource[4])<<5)|
(((uint64_t)FreqDomainResource[5])>>3);
for (int i=0; i<45; i++)
if ((bitmap>>(44-i))&1) {
count++;
if (!start_set) {
start = i;
start_set = 1;
}
}
*rb_offset = 6*start;
*n_rb = 6*count;
}
void nr_fill_cce_list(PHY_VARS_gNB *gNB, uint8_t m) {
nr_cce_t* cce;
......
......@@ -409,7 +409,7 @@ int8_t nr_rrc_ue_decode_NR_BCCH_BCH_Message(
// (void *)&bcch_message->message.choice.mib,
// sizeof(NR_MIB_t) );
nr_rrc_mac_config_req_ue( 0, 0, 0, mib, NULL,NULL, NULL, NULL);
nr_rrc_mac_config_req_ue( 0, 0, 0, mib, NULL, NULL);
}
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment