Merge remote-tracking branch 'origin/rh_ci_ra_fr2' into ci_test_ra_fr2

ci-scripts/conf_files/gnb.band261.tm1.32PRB.usrpn300.conf

+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 311; mnc = 480; mnc_length = 3;});	 
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 0;
+    pdsch_AntennaPorts                                        = 1;
+    pusch_TargetSNRx10                                        = 200;
+    pucch_TargetSNRx10                                        = 200;
+	
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is pointA + 23 PRBs@120kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 2071241;
+      dl_frequencyBand                                                 = 261;
+      # this is 27.900 GHz
+      dl_absoluteFrequencyPointA                                       = 2070833;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 3;
+        dl_carrierBandwidth                                            = 32;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=0,L=32 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 8525;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 3;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+             initialDLBWPk0_0                    = 0;
+             #initialULBWPmappingType
+	     #0=typeA,1=typeB
+             initialDLBWPmappingType_0           = 0;
+             #this is SS=2,L=3
+             initialDLBWPstartSymbolAndLength_0  = 40;
+
+             initialDLBWPk0_1                    = 0;
+             initialDLBWPmappingType_1           = 0;
+             #this is SS=2,L=12 
+             initialDLBWPstartSymbolAndLength_1  = 53;
+
+             initialDLBWPk0_2                    = 0;
+             initialDLBWPmappingType_2           = 0;
+             #this is SS=1,L=12 
+             initialDLBWPstartSymbolAndLength_2  = 54;
+
+             initialDLBWPk0_3                    = 0;
+             initialDLBWPmappingType_3           = 0;
+             #this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
+             initialDLBWPstartSymbolAndLength_3  = 57; //43; //57;
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 261;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 3;
+      ul_carrierBandwidth                                            = 32;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 8525;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 3;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 52;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 7;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 4;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 7;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#1 = 839, 2 = 139
+        prach_RootSequenceIndex_PR                                  = 2;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 3,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 6;
+        initialULBWPmappingType_0             = 1
+        # this is SS=0 L=11
+        initialULBWPstartSymbolAndLength_0    = 55;
+
+        initialULBWPk2_1                      = 6;
+        initialULBWPmappingType_1             = 1;
+        # this is SS=0 L=12
+        initialULBWPstartSymbolAndLength_1    = 69;
+
+        initialULBWPk2_2                      = 14;
+        initialULBWPmappingType_2             = 1;
+        # this is SS=10 L=4
+        initialULBWPstartSymbolAndLength_2    = 52;
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 3;
+      ssb_PositionsInBurst_Bitmap                                   = 0x0001000100010001L;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2;
+
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 3;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 3;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 3;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+  ssPBCH_BlockPower                                             = 10;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.18.99";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+
+    ///X2
+    enable_x2 = "no";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    t_dc_prep         = 1000;      /* unit: millisecond */
+    t_dc_overall      = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "192.168.18.199";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.18.198/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.18.198/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "192.168.18.198/24";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1;
+         nb_rx          = 1;
+         att_tx         = 0;
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 75;
+         eNB_instances  = [0];
+	 sdr_addrs = "addr=192.168.10.2,second_addr=192.168.20.2";
+         if_freq = 5124520000L;
+	 clock_src = "external";
+	 time_src = "external";
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+

ci-scripts/runTestOnVM.sh

@@ -2189,6 +2189,83 @@ function run_test_on_vm {
 
     if [[ "$RUN_OPTIONS" == "complex" ]] && [[ $VM_NAME =~ .*-rf-sim.* ]]
     then
+        #RA FR2 test, attention : has a different config file from the rest of the test
+        CN_CONFIG="noS1"
+        CONF_FILE=gnb.band261.tm1.32PRB.usrpn300.conf
+        S1_NOS1_CFG=0
+        PRB=32
+        FREQUENCY=28000 #28GHz
+
+        if [ ! -d $ARCHIVES_LOC ]
+        then
+            mkdir --parents $ARCHIVES_LOC
+        fi
+
+        local try_cnt=0
+        NR_STATUS=0
+
+        ######### start of RA TEST loop
+        while [ $try_cnt -lt 5 ] #5 because it hardly succeed within CI
+        do
+
+            SYNC_STATUS=0
+            RA_FR2_STATUS=0
+            rm -f $ARCHIVES_LOC/tdd_${PRB}prb_${CN_CONFIG}*ra_fr2_test.log
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the gNB"
+            echo "############################################################"
+            CURRENT_GNB_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_gnb_ra_fr2_test.log
+            #last argument = 1 is to enable --do-ra for RA test
+            start_rf_sim_gnb $GNB_VM_CMDS "$GNB_VM_IP_ADDR" $CURRENT_GNB_LOG_FILE $PRB $CONF_FILE $S1_NOS1_CFG 1
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Starting the NR-UE"
+            echo "############################################################"
+            CURRENT_NR_UE_LOG_FILE=tdd_${PRB}prb_${CN_CONFIG}_ue_ra_fr2_test.log
+            #last argument = 1 is to enable --do-ra for RA test
+            start_rf_sim_nr_ue $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR $GNB_VM_IP_ADDR $CURRENT_NR_UE_LOG_FILE $PRB $FREQUENCY $S1_NOS1_CFG 1
+            if [ $NR_UE_SYNC -eq 0 ]
+            then
+                echo "Problem w/ gNB and NR-UE not syncing"
+                terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
+                terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
+                scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
+                scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
+                SYNC_STATUS=-1
+                try_cnt=$((try_cnt+1))
+                continue
+            fi
+
+            echo "############################################################"
+            echo "${CN_CONFIG} : Terminate gNB/NR-UE simulators"
+            echo "############################################################"
+            sleep 20
+            terminate_enb_ue_basic_sim $NR_UE_VM_CMDS $NR_UE_VM_IP_ADDR 2
+            terminate_enb_ue_basic_sim $GNB_VM_CMDS $GNB_VM_IP_ADDR 1
+            scp -o StrictHostKeyChecking=no ubuntu@$GNB_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC
+            scp -o StrictHostKeyChecking=no ubuntu@$NR_UE_VM_IP_ADDR:/home/ubuntu/tmp/cmake_targets/log/$CURRENT_NR_UE_LOG_FILE $ARCHIVES_LOC
+
+            #check RA markers in gNB and NR UE log files
+            echo "############################################################"
+            echo "${CN_CONFIG} : Checking RA on gNB / NR-UE"
+            echo "############################################################"
+
+            # Proper check to be done when RA test is working!
+            check_ra_result $ARCHIVES_LOC/$CURRENT_GNB_LOG_FILE $ARCHIVES_LOC/$CURRENT_NR_UE_LOG_FILE
+            if [ $RA_FR2_STATUS -ne 0 ]
+            then
+                echo "RA FR2 test NOT OK"
+                echo "try_cnt = " $try_cnt
+                try_cnt=$((try_cnt+1))
+            else
+                try_cnt=$((try_cnt+10))
+            fi
+        done
+        ########### end RA FR2 test
+
+        ######### redefine config for the rest of the test
+
         CN_CONFIG="noS1"
         CONF_FILE=gnb.band78.tm1.106PRB.usrpn300.conf
         S1_NOS1_CFG=0
@@ -2377,6 +2454,7 @@ function run_test_on_vm {
         echo "Checking run status"
         echo "############################################################"
 
+        if [ $RA_FR2_STATUS -ne 0 ]; then NR_STATUS=-1; fi        
         if [ $RA_STATUS -ne 0 ]; then NR_STATUS=-1; fi
         if [ $SYNC_STATUS -ne 0 ]; then NR_STATUS=-1; fi
         if [ $PING_STATUS -ne 0 ]; then NR_STATUS=-1; fi