Skip to content

O
OpenXG-RAN
Commit d13bb9d7 authored by Rohit Gupta's avatar Rohit Gupta
Browse files
Options

update config files for rrh + usrp

parent 21a62e94
Show whitespace changes
Inline Side-by-side
Showing with 89 additions and 91 deletions
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.50PRB.rrh.usrpb210.conf
View file @ d13bb9d7
......@@ -28,10 +28,10 @@ eNBs =
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2660000000L;
downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 25;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
......@@ -97,11 +97,9 @@ eNBs =
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
......@@ -133,7 +131,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.170";
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -146,7 +144,7 @@ rrh_gw_config = (
#remote_address = "169.254.10.158";
#local_address = "169.254.8.15";
remote_address = "74:d4:35:cc:88:45";
local_address = "d4:be:d9:22:0a:ac";
local_address = "98:90:96:df:66:07";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
active = "yes";
......@@ -154,20 +152,20 @@ rrh_gw_config = (
rf_preference = "usrp_b200";
iq_txshift = 5;
tx_sample_advance = 113;
tx_scheduling_advance = 8;
tx_scheduling_advance = 9;
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
View file @ d13bb9d7
......@@ -133,7 +133,7 @@ eNBs =
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.170";
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
......@@ -146,7 +146,7 @@ rrh_gw_config = (
#remote_address = "169.254.10.158";
#local_address = "169.254.8.15";
remote_address = "74:d4:35:cc:88:45";
local_address = "d4:be:d9:22:0a:ac";
local_address = "98:90:96:df:66:07";
local_port = 50000; #for raw option local port must be the same to remote
remote_port = 50000;
active = "yes";
......@@ -154,20 +154,20 @@ rrh_gw_config = (
rf_preference = "usrp_b200";
iq_txshift = 5;
tx_sample_advance = 70;
tx_scheduling_advance = 8;
tx_scheduling_advance = 9;
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.118/24";
ENB_INTERFACE_NAME_FOR_S1_MME = "eth4";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_INTERFACE_NAME_FOR_S1U = "eth4";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.118/24";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment