Skip to content

O
OpenXG-RAN
Commit fe5fd249 authored by Cedric Roux's avatar Cedric Roux
Browse files
Options

Merge remote-tracking branch 'origin/tdd_w10' into develop_integration_w10

parents 8e022654 8e8fec1e
Hide whitespace changes
Inline Side-by-side
Showing with 1049 additions and 111 deletions
cmake_targets/autotests/README.txt
View file @ fe5fd249
......@@ -213,7 +213,7 @@ Obj.# Case# Test# Description
01 63 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 63 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 65 00 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX
01 65 lte-softmodem tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for 1TX/1RX
01 65 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 65 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 65 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -222,7 +222,7 @@ Obj.# Case# Test# Description
01 65 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 70 00 lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 70 lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 70 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 70 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 70 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -231,7 +231,7 @@ Obj.# Case# Test# Description
01 70 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 75 00 lte-softmodem + RRU (NGFI IF4P5, RAW) tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 75 lte-softmodem + RRU (NGFI IF4P5, RAW) tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 75 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 75 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 75 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -239,7 +239,7 @@ Obj.# Case# Test# Description
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 80 00 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 lte-softmodem + RRU (NGFI) tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 80 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -247,7 +247,7 @@ Obj.# Case# Test# Description
01 80 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 80 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 85 00 lte-softmodem + RRU (NGFI) tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 85 lte-softmodem + RRU (NGFI) tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 85 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 85 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 85 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
......@@ -255,6 +255,32 @@ Obj.# Case# Test# Description
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 86 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Huawei e3276 COTS UE for 1TX/1RX (TM1), 2TX/2RX (TM2)
01 86 00 Band 38 TDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 86 01 Band 38 TDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 86 02 Band 38 TDD 20MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
01 86 03 Band 38 TDD 5MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 86 04 Band 38 TDD 10MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 86 05 Band 38 TDD 20MHz DL Throughput (UDP) for 300 sec for 1TX/1RX
01 86 06 Band 38 TDD 5MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 86 07 Band 38 TDD 10MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 86 08 Band 38 TDD 20MHz UL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 86 09 Band 38 TDD 5MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 86 10 Band 38 TDD 10MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 86 11 Band 38 TDD 20MHz DL Throughput (UDP) for 300 sec for 2TX/2RX (TM2)
01 86 12 Band 38 TDD 5MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 86 13 Band 38 TDD 10MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 86 14 Band 38 TDD 20MHz UL Throughput (TCP) for 300 sec for 1TX/1RX
01 86 15 Band 38 TDD 5MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 86 16 Band 38 TDD 10MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 86 17 Band 38 TDD 20MHz DL Throughput (TCP) for 300 sec for 1TX/1RX
01 86 18 Band 38 TDD 5MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 86 19 Band 38 TDD 10MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 86 20 Band 38 TDD 20MHz UL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 86 21 Band 38 TDD 5MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 86 22 Band 38 TDD 10MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
01 86 23 Band 38 TDD 20MHz DL Throughput (TCP) for 300 sec for 2TX/2RX (TM2)
02 55 lte-softmodem tests with USRP B210 RF as eNB and ALU EPC w/ Sony Experia M4 COTS UE for 1TX/1RX and 2TX/2RX (TM2)
02 55 00 Band 7 FDD 5MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
02 55 01 Band 7 FDD 10MHz UL Throughput (UDP) for 300 sec for 1TX/1RX
......
cmake_targets/autotests/test_case_list.xml
View file @ fe5fd249
......@@ -8664,6 +8664,30 @@ c
<nruns>10</nruns>
</testCase>
<testCase id="018600"></testCase>
<testCase id="018601"></testCase>
<testCase id="018602"></testCase>
<testCase id="018603"></testCase>
<testCase id="018604"></testCase>
<testCase id="018605"></testCase>
<testCase id="018606"></testCase>
<testCase id="018607"></testCase>
<testCase id="018608"></testCase>
<testCase id="018609"></testCase>
<testCase id="018610"></testCase>
<testCase id="018611"></testCase>
<testCase id="018612"></testCase>
<testCase id="018613"></testCase>
<testCase id="018614"></testCase>
<testCase id="018615"></testCase>
<testCase id="018616"></testCase>
<testCase id="018617"></testCase>
<testCase id="018618"></testCase>
<testCase id="018619"></testCase>
<testCase id="018620"></testCase>
<testCase id="018621"></testCase>
<testCase id="018622"></testCase>
<testCase id="018623"></testCase>
<testCase id="025500" >
<class>lte-softmodem</class>
......
cmake_targets/autotests/v2/actions/start_3276.bash 0 → 100644
View file @ fe5fd249
#enable control+C reception (to be refined if it does not work)
stty isig intr ^C
cd /tmp/oai_test_setup/oai
source oaienv
cd cmake_targets/autotests/v2/actions
sudo python start_3276.py
sudo wvdial -C wvdial.3276.conf || true
sudo python stop_3276.py
cmake_targets/autotests/v2/actions/start_3276.py 0 → 100644
View file @ fe5fd249
import time
from modem import quit, Modem
try:
modem = Modem("/dev/ttyUSB0")
#test that modem is there
print "INFO: check modem's presence"
modem.send('AT')
if modem.wait().ret != True:
print "ERROR: no modem?"
quit(1)
#first deactivate
print "INFO: deactivate the modem"
modem.send('AT+CFUN=0')
if modem.wait().ret != True:
print "ERROR: failed deactivating the modem"
quit(1)
#activate the modem
print "INFO: activate the modem"
modem.send('AT+CFUN=1')
if modem.wait().ret != True:
print "ERROR: failed asking modem for activation"
quit(1)
#wait for modem to be connected
#timeout after one minute
print "INFO: wait for modem to be connected (timeout: one minute)"
start_time = time.time()
while True:
modem.send('AT+CGATT?')
r = modem.wait()
if r.ret != True:
print "ERROR: failed checking attachment status of modem"
quit(1)
if "+CGATT: 1" in r.data:
break
if not "CGATT: 0" in r.data:
print "ERROR: bad data when checking attachment status of modem"
quit(1)
time.sleep(0.1)
if time.time() > start_time + 60:
print "ERROR: modem not connected after one minute, close modem"
modem.send('AT+CFUN=0')
r = modem.wait()
if r.ret != True:
print "ERROR: closing modem failed"
quit(1)
print "INFO: modem is connected"
except BaseException, e:
print "ERROR: " + str(e)
quit(1)
quit(0)
cmake_targets/autotests/v2/actions/stop_3276.py 0 → 100644
View file @ fe5fd249
import time
from modem import quit, Modem
try:
modem = Modem("/dev/ttyUSB0")
#test that modem is there
print "INFO: check modem's presence"
modem.send('AT')
r = modem.wait()
if r.ret != True and "NO CARRIER" not in r.data:
print "ERROR: no modem?"
quit(1)
if "NO CARRIER" in r.data:
print "WARNING: 'NO CARRIER' detected, not sure if handled correctly"
#deactivate the modem
print "INFO: deactivate the modem"
modem.send('AT+CFUN=0')
if modem.wait().ret != True:
print "ERROR: failed asking modem for deactivation"
quit(1)
except BaseException, e:
print "ERROR: " + str(e)
quit(1)
quit(0)
cmake_targets/autotests/v2/actions/wvdial.3276.conf 0 → 100644
View file @ fe5fd249
[Dialer Defaults]
Modem = /dev/ttyUSB0
ISDN = off
Modem Type = Analog Modem
Baud = 9600
Init1 = ATZ
Init2 = AT&F &D2 &C1
Init3 = AT+CGDCONT=1,"IP","oai.ipv4"
Phone = *99#
Phone1 =
Phone2 =
Phone3 =
Phone4 =
Ask Password = off
Password = ''
Username = ImaginLab
Auto Reconnect = off
Abort on Busy = off
Carrier Check = on
Check Def Route = on
Abort on No Dialtone = on
Stupid Mode = on
Idle Seconds = 0
Auto DNS = on
;Minimize = off
;Dock = off
;Do NOT edit this file by hand!
cmake_targets/autotests/v2/alu_test.py
View file @ fe5fd249
......@@ -102,7 +102,7 @@ class alu_test:
# compile_enb
##########################################################################
def compile_enb(self, build_arguments):
log("INFO: ALU test: compile softmodem")
log("INFO: ALU test: compile softmodem on " + self.enb_machine)
envcomp = list(self.env)
envcomp.append('BUILD_ARGUMENTS="' + build_arguments + '"')
#we don't care about BUILD_OUTPUT but required (TODO: change that)
......@@ -163,24 +163,24 @@ class alu_test:
#os._exit(1)
##########################################################################
# start_bandrich_ue
# start_ue
##########################################################################
def start_bandrich_ue(self):
log("INFO: ALU test: start bandrich UE")
self.task_ue = Task("actions/start_bandrich.bash",
"start_bandrich",
def start_ue(self, ue):
log("INFO: ALU test: start " + ue + " UE")
self.task_ue = Task("actions/start_" + ue + ".bash",
"start_" + ue,
self.ue_machine,
self.oai_user,
self.oai_password,
self.env,
self.logdir + "/start_bandrich." + self.ue_machine,
self.logdir + "/start_" + ue + "." + self.ue_machine,
event=self.event)
self.task_ue.waitlog("local IP address", event=self.event)
self.event.wait()
#at this point one task has died or we have the line in the log
if self.task_ue.waitlog_state != WAITLOG_SUCCESS:
log("ERROR: ALU test: bandrich UE did not connect")
log("ERROR: ALU test: " + ue + " UE did not connect")
raise TestFailed()
self.event.clear()
......@@ -191,21 +191,21 @@ class alu_test:
log("ERROR: ALU test: eNB, HSS or UE task died")
raise TestFailed()
#get bandrich UE IP
#get UE IP
l = open(self.task_ue.logfile, "r").read()
self.bandrich_ue_ip = re.search("local IP address (.*)\n", l) \
.groups()[0]
log("INFO: ALU test: bandrich UE IP address: " + self.bandrich_ue_ip)
self.ue_ip = re.search("local IP address (.*)\n", l) \
.groups()[0]
log("INFO: ALU test: " + ue + " UE IP address: " + self.ue_ip)
##########################################################################
# stop_bandrich_ue
# stop_ue
##########################################################################
def stop_bandrich_ue(self):
log("INFO: ALU test: stop bandrich UE")
def stop_ue(self, ue):
log("INFO: ALU test: stop " + ue + " UE")
self.task_ue.sendnow("%c" % 3)
ret = self.task_ue.wait()
if ret != 0:
log("ERROR: ALU test: task bandrich UE failed")
log("ERROR: ALU test: task " + ue + " UE failed")
#not sure if we have to quit here or not
#os._exit(1)
......@@ -286,47 +286,47 @@ class alu_test:
##########################################################################
# dl_tcp
##########################################################################
def dl_tcp(self):
self._do_traffic("bandrich downlink TCP",
"server_tcp", self.ue_machine, self.bandrich_ue_ip,
def dl_tcp(self, ue):
self._do_traffic(ue + " downlink TCP",
"server_tcp", self.ue_machine, self.ue_ip,
"client_tcp", self.epc_machine,
"Server listening on TCP port 5001",
"bandrich_downlink_tcp_server",
"bandrich_downlink_tcp_client")
ue + "_downlink_tcp_server",
ue + "_downlink_tcp_client")
##########################################################################
# ul_tcp
##########################################################################
def ul_tcp(self):
self._do_traffic("bandrich uplink TCP",
def ul_tcp(self, ue):
self._do_traffic(ue + " uplink TCP",
"server_tcp", self.epc_machine, "192.172.0.1",
"client_tcp", self.ue_machine,
"Server listening on TCP port 5001",
"bandrich_uplink_tcp_server",
"bandrich_uplink_tcp_client")
ue + "_uplink_tcp_server",
ue + "_uplink_tcp_client")
##########################################################################
# dl_udp
##########################################################################
def dl_udp(self, bandwidth):
self._do_traffic("bandrich downlink UDP",
"server_udp", self.ue_machine, self.bandrich_ue_ip,
def dl_udp(self, ue, bandwidth):
self._do_traffic(ue + " downlink UDP",
"server_udp", self.ue_machine, self.ue_ip,
"client_udp", self.epc_machine,
"Server listening on UDP port 5001",
"bandrich_downlink_udp_server",
"bandrich_downlink_udp_client",
ue + "_downlink_udp_server",
ue + "_downlink_udp_client",
udp_bandwidth=bandwidth)
##########################################################################
# ul_udp
##########################################################################
def ul_udp(self, bandwidth):
self._do_traffic("bandrich uplink UDP",
def ul_udp(self, ue, bandwidth):
self._do_traffic(ue + " uplink UDP",
"server_udp", self.epc_machine, "192.172.0.1",
"client_udp", self.ue_machine,
"Server listening on UDP port 5001",
"bandrich_uplink_udp_server",
"bandrich_uplink_udp_client",
ue + "_uplink_udp_server",
ue + "_uplink_udp_client",
udp_bandwidth=bandwidth)
##############################################################################
......@@ -337,19 +337,33 @@ def run_b210_alu(tests, openair_dir, oai_user, oai_password, env):
if not do_tests(tests['b210']['alu']):
return
#compile eNB
alu = alu_test(epc='amerique', enb='hutch', ue='stevens',
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/b210_alu/compile_enb',
env=env)
try:
alu.compile_enb("--eNB -w USRP -x -c --disable-cpu-affinity")
except BaseException, e:
log("ERROR: ALU test failed: eNB compilation failed: " + str(e))
return
#compile eNB (two cases: one for FDD and one for TDD)
if do_tests(tests['b210']['alu']['fdd']):
alu = alu_test(epc='amerique', enb='hutch', ue='stevens',
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/b210_alu/compile_enb_fdd',
env=env)
try:
alu.compile_enb("--eNB -w USRP -x -c --disable-cpu-affinity")
except BaseException, e:
log("ERROR: ALU test failed: eNB compilation failed: " + str(e))
return
if do_tests(tests['b210']['alu']['tdd']):
alu = alu_test(epc='amerique', enb='calisson', ue='mozart',
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/b210_alu/compile_enb_tdd',
env=env)
try:
alu.compile_enb("--eNB -w USRP -x -c --disable-cpu-affinity")
except BaseException, e:
log("ERROR: ALU test failed: eNB compilation failed: " + str(e))
return
#run tests
......@@ -361,29 +375,38 @@ def run_b210_alu(tests, openair_dir, oai_user, oai_password, env):
"10" : "15M",
"20" : "15M" }
for bw in ('5', '10', '20'):
if do_tests(tests['b210']['alu'][bw]):
log("INFO: ALU test: run tests for bandwidth " + bw + " MHz")
ctest = tests['b210']['alu'][bw]
alu = alu_test(epc='amerique', enb='hutch', ue='stevens',
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/b210_alu/' + bw,
env=env)
try:
alu.start_epc()
alu.start_enb("enb.band7.tm1.usrpb210." + bw + "MHz.conf")
if do_tests(ctest['bandrich']):
alu.start_bandrich_ue()
if do_tests(ctest['bandrich']['tcp']['dl']): alu.dl_tcp()
if do_tests(ctest['bandrich']['tcp']['ul']): alu.ul_tcp()
if do_tests(ctest['bandrich']['udp']['dl']):
alu.dl_udp(udp_dl_bandwidth[bw])
if do_tests(ctest['bandrich']['udp']['ul']):
alu.ul_udp(udp_ul_bandwidth[bw])
alu.stop_bandrich_ue()
alu.stop_enb()
alu.stop_epc()
except BaseException, e:
log("ERROR: ALU test failed: " + str(e))
alu.finish()
ue_machine = { "fdd" : "stevens",
"tdd" : "mozart" }
enb_machine = { "fdd" : "hutch",
"tdd" : "calisson" }
band = { "fdd" : "7",
"tdd" : "38" }
for mode in ('fdd', 'tdd'):
for bw in ('5', '10', '20'):
if do_tests(tests['b210']['alu'][mode][bw]):
log("INFO: ALU test: run tests for bandwidth " + bw + " MHz")
ctest = tests['b210']['alu'][mode][bw]
alu = alu_test(epc='amerique', enb=enb_machine[mode], ue=ue_machine[mode],
openair=openair_dir,
user=oai_user, password=oai_password,
log_subdir='enb_tests/b210_alu/' + mode + "/" + bw,
env=env)
try:
alu.start_epc()
alu.start_enb("enb.band" + band[mode] + ".tm1.usrpb210." + mode + "." + bw + "MHz.conf")
for ue in ('bandrich', '3276'):
if ue in ctest and do_tests(ctest[ue]):
alu.start_ue(ue)
if do_tests(ctest[ue]['tcp']['dl']): alu.dl_tcp(ue)
if do_tests(ctest[ue]['tcp']['ul']): alu.ul_tcp(ue)
if do_tests(ctest[ue]['udp']['dl']): alu.dl_udp(ue, udp_dl_bandwidth[bw])
if do_tests(ctest[ue]['udp']['ul']): alu.ul_udp(ue, udp_ul_bandwidth[bw])
alu.stop_ue(ue)
alu.stop_enb()
alu.stop_epc()
except BaseException, e:
log("ERROR: ALU test failed: " + str(e))
alu.finish()
cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.10MHz.conf 0 → 100644
View file @ fe5fd249
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 38;
downlink_frequency = 2580000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.82/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.82/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.20MHz.conf 0 → 100644
View file @ fe5fd249
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 38;
downlink_frequency = 2580000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.82/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.82/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/config/enb.band38.tm1.usrpb210.tdd.5MHz.conf 0 → 100644
View file @ fe5fd249
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 38;
downlink_frequency = 2580000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.82/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.82/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
cmake_targets/autotests/v2/main.py
View file @ fe5fd249
......@@ -283,27 +283,41 @@ machine_list.wait_all_free()
tests = {
'b210' : {
'alu' : {
'5' : {
'bandrich' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }},
'sony' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}},
'10' : {
'bandrich' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }},
'sony' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}},
'20' : {
'bandrich' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }},
'sony' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}}},
'fdd' : {
'5' : {
'bandrich' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }},
'sony' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}},
'10' : {
'bandrich' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }},
'sony' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}},
'20' : {
'bandrich' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }},
'sony' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}}},
'tdd' : {
'5' : {
'3276' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}},
'10' : {
'3276' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}},
'20' : {
'3276' : {
'tcp' : { 'ul': False, 'dl' : False },
'udp' : { 'ul': False, 'dl' : False }}}}},
'openair-cn' : {}
},
'x310' : {
......@@ -321,24 +335,24 @@ for test in todo_tests:
todo_tests_ids.append(test.get('id'))
for test in todo_tests_ids:
if test=='015500':tests['b210']['alu'][ '5']['bandrich']['udp']['ul']=True
if test=='015501':tests['b210']['alu']['10']['bandrich']['udp']['ul']=True
if test=='015502':tests['b210']['alu']['20']['bandrich']['udp']['ul']=True
if test=='015503':tests['b210']['alu'][ '5']['bandrich']['udp']['dl']=True
if test=='015504':tests['b210']['alu']['10']['bandrich']['udp']['dl']=True
if test=='015505':tests['b210']['alu']['20']['bandrich']['udp']['dl']=True
if test=='015500':tests['b210']['alu']['fdd'][ '5']['bandrich']['udp']['ul']=True
if test=='015501':tests['b210']['alu']['fdd']['10']['bandrich']['udp']['ul']=True
if test=='015502':tests['b210']['alu']['fdd']['20']['bandrich']['udp']['ul']=True
if test=='015503':tests['b210']['alu']['fdd'][ '5']['bandrich']['udp']['dl']=True
if test=='015504':tests['b210']['alu']['fdd']['10']['bandrich']['udp']['dl']=True
if test=='015505':tests['b210']['alu']['fdd']['20']['bandrich']['udp']['dl']=True
if test=='015506':log('WARNING: skip test ' + test) #TODO
if test=='015507':log('WARNING: skip test ' + test) #TODO
if test=='015508':log('WARNING: skip test ' + test) #TODO
if test=='015509':log('WARNING: skip test ' + test) #TODO
if test=='015510':log('WARNING: skip test ' + test) #TODO
if test=='015511':log('WARNING: skip test ' + test) #TODO
if test=='015512':tests['b210']['alu'][ '5']['bandrich']['tcp']['ul']=True
if test=='015513':tests['b210']['alu']['10']['bandrich']['tcp']['ul']=True
if test=='015514':tests['b210']['alu']['20']['bandrich']['tcp']['ul']=True
if test=='015515':tests['b210']['alu'][ '5']['bandrich']['tcp']['dl']=True
if test=='015516':tests['b210']['alu']['10']['bandrich']['tcp']['dl']=True
if test=='015517':tests['b210']['alu']['20']['bandrich']['tcp']['dl']=True
if test=='015512':tests['b210']['alu']['fdd'][ '5']['bandrich']['tcp']['ul']=True
if test=='015513':tests['b210']['alu']['fdd']['10']['bandrich']['tcp']['ul']=True
if test=='015514':tests['b210']['alu']['fdd']['20']['bandrich']['tcp']['ul']=True
if test=='015515':tests['b210']['alu']['fdd'][ '5']['bandrich']['tcp']['dl']=True
if test=='015516':tests['b210']['alu']['fdd']['10']['bandrich']['tcp']['dl']=True
if test=='015517':tests['b210']['alu']['fdd']['20']['bandrich']['tcp']['dl']=True
if test=='015518':log('WARNING: skip test ' + test) #TODO
if test=='015519':log('WARNING: skip test ' + test) #TODO
if test=='015520':log('WARNING: skip test ' + test) #TODO
......@@ -441,6 +455,31 @@ for test in todo_tests_ids:
if test=='018504':log('WARNING: skip test ' + test) #TODO
if test=='018505':log('WARNING: skip test ' + test) #TODO
if test=='018600':tests['b210']['alu']['tdd'][ '5']['3276']['udp']['ul']=True
if test=='018601':tests['b210']['alu']['tdd']['10']['3276']['udp']['ul']=True
if test=='018602':tests['b210']['alu']['tdd']['20']['3276']['udp']['ul']=True
if test=='018603':tests['b210']['alu']['tdd'][ '5']['3276']['udp']['dl']=True
if test=='018604':tests['b210']['alu']['tdd']['10']['3276']['udp']['dl']=True
if test=='018605':tests['b210']['alu']['tdd']['20']['3276']['udp']['dl']=True
if test=='018606':log('WARNING: skip test ' + test) #TODO
if test=='018607':log('WARNING: skip test ' + test) #TODO
if test=='018608':log('WARNING: skip test ' + test) #TODO
if test=='018609':log('WARNING: skip test ' + test) #TODO
if test=='018610':log('WARNING: skip test ' + test) #TODO
if test=='018611':log('WARNING: skip test ' + test) #TODO
if test=='018612':tests['b210']['alu']['tdd'][ '5']['3276']['tcp']['ul']=True
if test=='018613':tests['b210']['alu']['tdd']['10']['3276']['tcp']['ul']=True
if test=='018614':tests['b210']['alu']['tdd']['20']['3276']['tcp']['ul']=True
if test=='018615':tests['b210']['alu']['tdd'][ '5']['3276']['tcp']['dl']=True
if test=='018616':tests['b210']['alu']['tdd']['10']['3276']['tcp']['dl']=True
if test=='018617':tests['b210']['alu']['tdd']['20']['3276']['tcp']['dl']=True
if test=='018618':log('WARNING: skip test ' + test) #TODO
if test=='018619':log('WARNING: skip test ' + test) #TODO
if test=='018620':log('WARNING: skip test ' + test) #TODO
if test=='018621':log('WARNING: skip test ' + test) #TODO
if test=='018622':log('WARNING: skip test ' + test) #TODO
if test=='018623':log('WARNING: skip test ' + test) #TODO
if test=='025500':log('WARNING: skip test ' + test) #TODO
if test=='025501':log('WARNING: skip test ' + test) #TODO
if test=='025502':log('WARNING: skip test ' + test) #TODO
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band38.tm1.usrpb210.conf 0 → 100644
View file @ fe5fd249
Active_eNBs = ( "eNB_Eurecom_LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB_Eurecom_LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = "1";
mobile_country_code = "208";
mobile_network_code = "92";
////////// Physical parameters:
component_carriers = (
{
node_function = "eNodeB_3GPP";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "TDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 38;
downlink_frequency = 2580000000L;
uplink_frequency_offset = 0;
Nid_cell = 0;
N_RB_DL = 25;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 1;
pucch_nCS_AN = 0;
pucch_n1_AN = 32;
pdsch_referenceSignalPower = -24;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -90;
pusch_alpha = "AL1";
pucch_p0_Nominal = -96;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -104;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth6";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.82/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth6";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.82/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
}
);
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment