Merge branch 'NR_SL_FAPI' into 'develop'

Sidelink MAC-PHY interface definition

See merge request oai/openairinterface5g!2234

nfapi/open-nFAPI/nfapi/public_inc/sidelink_nr_ue_interface.h

+#ifndef _SIDELINK_NR_UE_INTERFACE_H_
+#define _SIDELINK_NR_UE_INTERFACE_H_
+
+#include "fapi_nr_ue_interface.h"
+
+#define SL_NR_RX_CONFIG_LIST_NUM 1
+#define SL_NR_TX_CONFIG_LIST_NUM 1
+#define SL_NR_RX_IND_MAX_PDU 1
+#define SL_NR_MAX_PSCCH_SCI_LENGTH_IN_BYTES 8
+#define SL_NR_MAX_PSSCH_SCI_LENGTH_IN_BYTES 8
+#define SL_NR_MAX_SCI_LENGTH_IN_BYTES 8
+
+typedef enum sl_sci_format_type_enum {
+  SL_SCI_INVALID_FORMAT,
+  SL_SCI_FORMAT_1A_ON_PSCCH,
+  SL_SCI_FORMAT_2_ON_PSSCH,
+} sl_sci_format_type_enum_t;
+
+//Type of Contents of SL-RX indication from PHY to MAC
+typedef enum sl_rx_pdu_type_enum {
+  SL_NR_RX_PDU_TYPE_NONE,
+  SL_NR_RX_PDU_TYPE_SSB,
+  SL_NR_RX_PDU_TYPE_SLSCH
+} sl_rx_pdu_type_enum_t;
+
+//Type of SL-RX CONFIG requests from MAC to PHY
+typedef enum sl_nr_rx_config_type_enum {
+  SL_NR_CONFIG_TYPE_RX_PSBCH = 1,
+  SL_NR_CONFIG_TYPE_RX_PSCCH,
+  SL_NR_CONFIG_TYPE_RX_PSSCH_SCI,
+  SL_NR_CONFIG_TYPE_RX_PSSCH_SLSCH,
+  SL_NR_CONFIG_TYPE_RX_MAXIMUM
+} sl_nr_rx_config_type_enum_t;
+
+//Type of SL-TX CONFIG requests from MAC to PHY
+typedef enum sl_nr_tx_config_type_enum {
+  SL_NR_CONFIG_TYPE_TX_PSBCH = SL_NR_CONFIG_TYPE_RX_MAXIMUM + 1,
+  SL_NR_CONFIG_TYPE_TX_PSCCH_PSSCH,
+  SL_NR_CONFIG_TYPE_TX_PSFCH,
+  SL_NR_CONFIG_TYPE_TX_MAXIMUM
+} sl_nr_tx_config_type_enum_t;
+
+//PHY Indicates MAC about the SCI-indication
+//During blind decoding, SCI-1A can be decoded in every subchannel.
+typedef struct {
+  sl_sci_format_type_enum_t sci_format_type; // SCI FORMAT 1A or SCI FORMAT 2
+  // lowest subchannel index in the resource pool where the SCI-1A was detected
+  // Not used for SCI-2
+  uint16_t subch_index;
+  //RSRP sent in case of sense pscch
+  int16_t  pscch_rsrp;
+  //Length of SCI decoded
+  uint16_t sci_payloadlen;
+  //Derived from PSCCH CRC Refer 38.211 section 8.3.1.1
+  //Will be passed on if PSSCH decoding needs to be done.
+  //Filled only if PSCCH decoded
+  uint16_t Nid;
+  // Payload of the received SCIs
+  uint8_t sci_payloadBits[SL_NR_MAX_SCI_LENGTH_IN_BYTES];
+} sl_nr_sci_indication_pdu_t;
+
+// PHY indicates MAC about the received SCIs using this API
+typedef struct {
+  uint16_t sfn;
+  uint8_t slot;
+  uint16_t number_of_SCIs;
+  //If response to sensing - then this will be set to TRUE
+  uint8_t sensing_result;
+  //in case pssch sensing is requested.
+  int16_t pssch_rsrp;
+  sl_nr_sci_indication_pdu_t sci_pdu;
+} sl_nr_sci_indication_t;
+
+// IF UE Rx PSBCH, PHY indicates MAC with received MIB and PSBCH RSRP
+typedef struct sl_nr_ssb_pdu {
+  uint8_t psbch_payload[4];
+  int16_t rsrp_dbm;
+  uint16_t rx_slss_id;
+  bool decode_status;
+} sl_nr_ssb_pdu_t;
+
+//Use the same structure of pdsch pdu for slsch pdu
+typedef fapi_nr_pdsch_pdu_t sl_nr_slsch_pdu_t;
+
+typedef struct {
+  sl_rx_pdu_type_enum_t pdu_type;
+  union {
+    sl_nr_ssb_pdu_t ssb_pdu;
+    sl_nr_slsch_pdu_t rx_slsch_pdu;
+  };
+} sl_nr_rx_indication_body_t;
+
+typedef struct {
+  uint16_t sfn;
+  uint16_t slot;
+  uint16_t number_pdus;
+  sl_nr_rx_indication_body_t rx_indication_body[SL_NR_RX_IND_MAX_PDU];
+} sl_nr_rx_indication_t;
+
+typedef struct sl_nr_rx_config_pscch_pdu {
+  // Starting RE of the lowest subchannel in a resource where PSCCH
+  // freq domain allocation starts
+  uint16_t pscch_startrb;
+  // Number of symbols used for PSCCH
+  uint16_t pscch_numsym;
+  // Number of  RBS used for PSCCH
+  uint16_t pscch_numrbs;
+  // Scrambling Id used for Generation of PSCCH DMRS Symbols
+  uint32_t pscch_dmrs_scrambling_id;
+  // num subchannels in a resource pool
+  uint16_t num_subch;
+  // Size of subchannels in RBs
+  uint16_t subchannel_size;
+  // PSCCH PSSCH RX: this is set to 1 - Blind decoding for SCI1A done on every subchannel
+  // PSCCH SENSING: this is equal to number of subchannels forming a resource.
+  uint16_t l_subch;
+  //number of symbols for Sidelink transmission on PSSCH/PSCCH
+  //(Total Sidelink symbols available - number of psfch symbols configured - 2)
+  //Guard symbol + AGC symbol are also excluded
+  //Indicates the number of symbols for PSCCH+PSSCH txn
+  uint8_t pssch_numsym;
+  //sci 1A length used to decode on PSCCH.
+  uint8_t sci_1a_length;
+  //This paramter is set if PSCCH RX is triggered on TX resource pool
+  // as part of TX pool sensing procedure.
+  uint8_t sense_pscch;
+} sl_nr_rx_config_pscch_pdu_t;
+
+typedef struct sl_nr_rx_config_pssch_sci_pdu {
+  // Expected Length of SCI2 in bits
+  uint8_t sci2_len;
+  // Used to determine number of SCI2 modulated symbols
+  uint8_t sci2_beta_offset;
+  // Used to determine number of SCI2 modulated symbols
+ //Values will be sl-scaling*100 (sl-scaling values 0.5, 0.65, 0.8, 1)
+  uint8_t sci2_alpha_times_100;
+
+  uint16_t targetCodeRate;
+  uint8_t mod_order;
+  uint8_t num_layers;
+
+  //DMRS SYMBOL MASK. If bit set to 1 indicates it is a DMRS symbol. LSB is symbol 0
+  // Table from SPEC 38.211, Table 8.4.1.1.2-1
+  uint16_t dmrs_symbol_position;
+
+  // Derived from PSCCH CRC Refer 38.211 section 8.3.1.1
+  // to be used for PSSCH DMRS and PSSCH 38.211 Scrambling
+  uint16_t Nid;
+
+  // Starting RE of the lowest subchannel.
+  //In Sym with PSCCH - Start of PSCCH
+  //In Sym without PSCCH - Start of PSSCH
+  // freq domain allocation starts
+  uint16_t startrb;
+  // Number of symbols used for PSCCH
+  uint16_t pscch_numsym;
+  // Number of  RBS used for PSCCH
+  uint16_t pscch_numrbs;
+  // num subchannels in a resource pool
+  uint16_t num_subch;
+  // Size of subchannels in RBs
+  uint16_t subchannel_size;
+  // In case of PSCCH PSSCH RX: this is always 1. Blind decoding done for every channel
+  // In case of RESOURCE SENSING: this is equal to number of subchannels forming a resource.
+  uint16_t l_subch;
+  //number of symbols for Sidelink transmission on PSSCH/PSCCH
+  //(Total Sidelink symbols available - number of psfch symbols configured - 2)
+  //Guard symbol + AGC symbol are also excluded
+  //Indicates the number of symbols for PSCCH+PSSCH txn
+  uint8_t pssch_numsym;
+
+  //This paramter is set if PSSCH sensing (PSSCH DMRS RSRP measurement)
+  // is triggred as part of TX pool sensing procedure.
+  uint8_t sense_pssch;
+
+} sl_nr_rx_config_pssch_sci_pdu_t;
+
+typedef struct sl_nr_rx_config_pssch_pdu {
+  uint32_t tbslbrm;
+  // Transport block size determined by MAC
+  uint32_t tb_size;
+  uint16_t target_coderate;
+  uint8_t  harq_pid;
+  uint8_t  mod_order;
+  uint8_t  mcs;
+  uint8_t  mcs_table;
+  uint8_t  num_layers;
+ //REdundancy version to be used for transmission
+  uint8_t rv_index;
+  uint8_t ndi;
+} sl_nr_rx_config_pssch_pdu_t;
+
+typedef struct {
+  sl_nr_rx_config_type_enum_t pdu_type; // indicates the type of RX config request
+  union {
+    sl_nr_rx_config_pscch_pdu_t rx_pscch_config_pdu;
+    sl_nr_rx_config_pssch_sci_pdu_t rx_sci2_config_pdu;
+    sl_nr_rx_config_pssch_pdu_t rx_pssch_config_pdu;
+  };
+} sl_nr_rx_config_request_pdu_t;
+
+// MAC commands PHY to perform an action on RX RESOURCE POOL or RX PSBCH using this RX CONFIG
+// at this TTI as indicated in sfn, slot
+typedef struct {
+  uint16_t sfn;
+  uint16_t slot;
+  uint8_t number_pdus;
+  sl_nr_rx_config_request_pdu_t sl_rx_config_list[SL_NR_RX_CONFIG_LIST_NUM];
+} sl_nr_rx_config_request_t;
+
+//MAC commands PHY to transmit Data on PSCCH, PSSCH.
+typedef struct sl_nr_tx_config_pscch_pssch_pdu {
+
+  //SCI 1A Payload Prepared by MAC, to be sent on PSCCH
+  uint8_t pscch_sci_payload[SL_NR_MAX_PSCCH_SCI_LENGTH_IN_BYTES];
+  //SCI 1A Payload Length in bits
+  uint8_t pscch_sci_payload_len;
+  //SCI 2 Payload Prepared by MAC and to be sent on PSSCH
+  uint8_t sci2_payload[SL_NR_MAX_PSSCH_SCI_LENGTH_IN_BYTES];
+  //SCI 2 Payload Length in bits
+  uint8_t sci2_payload_len;
+
+  // Starting RE of the lowest subchannel.
+  //In Sym with PSCCH - Start of PSCCH
+  //In Sym without PSCCH - Start of PSSCH
+  // freq domain allocation starts
+  uint16_t startrb;
+  // Number of symbols used for PSCCH
+  uint16_t pscch_numsym;
+  // Number of  RBS used for PSCCH
+  uint16_t pscch_numrbs;
+  // Scrambling Id used for Generation of PSCCH DMRS Symbols
+  uint32_t pscch_dmrs_scrambling_id;
+  // num subchannels in a resource pool
+  uint16_t num_subch;
+  // Size of subchannels in RBs
+  uint16_t subchannel_size;
+  //PSCCH PSSCH TX: Size of subchannels in a PSSCH resource (l_subch)
+  uint16_t l_subch;
+  //number of symbols for Sidelink transmission on PSSCH/PSCCH
+  //(Total Sidelink symbols available - number of psfch symbols configured - 2)
+  //Guard symbol + AGC symbol are also excluded
+  //Indicates the number of symbols for PSCCH+PSSCH txn
+  uint8_t pssch_numsym;
+
+  //.... Other Parameters for SCI-2 and PSSCH
+
+  // Used to determine number of SCI2 modulated symbols
+  uint8_t sci2_beta_offset;
+  //Values will be sl-scaling*100 (sl-scaling values 0.5, 0.65, 0.8, 1)
+  uint8_t sci2_alpha_times_100;
+
+  uint32_t tbslbrm;
+  uint32_t tb_size;
+  uint16_t target_coderate;
+  uint8_t  harq_pid;
+  uint8_t  mod_order;
+  uint8_t  mcs;
+  uint8_t  mcs_table;
+  uint8_t  num_layers;
+  uint8_t rv_index;
+  uint8_t ndi;
+
+  //DMRS SYMBOL MASK. If bit set to 1 indicates it is a DMRS symbol. LSB is symbol 0
+  // Table from SPEC 38.211, Table 8.4.1.1.2-1
+  uint16_t dmrs_symbol_position;
+
+
+  //....TBD.. any additional parameters
+
+  //TX Power for PSSCH in symbol without PSCCH.
+  // Power for PSCCH and power for PSSCH in symbol with PSCCH is calculated
+  // from this value according to 38.213 section 16
+  int16_t pssch_tx_power;
+
+} sl_nr_tx_config_pscch_pssch_pdu_t;
+
+// MAC indicates PHY to send PSBCH.
+typedef struct sl_nr_tx_config_psbch_pdu {
+
+  uint8_t psbch_payload[4]; // payload containing sl-MIB
+  uint16_t tx_slss_id; // slss_id selected by RRC and to be used for MIB transmission on PSBCH
+  int16_t psbch_tx_power; // TX Power used for sending PSBCH
+
+} sl_nr_tx_config_psbch_pdu_t;
+
+// MAC commands PHY to perform an action on TX RESOURCE POOL or TX PSBCH using this TX CONFIG
+typedef struct {
+  sl_nr_tx_config_type_enum_t pdu_type; // indicates the type of TX config request
+  union {
+    sl_nr_tx_config_psbch_pdu_t tx_psbch_config_pdu;
+    sl_nr_tx_config_pscch_pssch_pdu_t tx_pscch_pssch_config_pdu;
+  };
+} sl_nr_tx_config_request_pdu_t;
+
+// MAC commands PHY to perform an action on TX RESOURCE POOL or TX PSBCH using this TX CONFIG
+// at this TTI as indicated in sfn, slot
+typedef struct {
+  uint16_t sfn;
+  uint16_t slot;
+  uint8_t number_pdus;
+  sl_nr_tx_config_request_pdu_t tx_config_list[SL_NR_TX_CONFIG_LIST_NUM];
+} sl_nr_tx_config_request_t;
+
+typedef enum sl_sync_source_enum {
+
+ SL_SYNC_SOURCE_NONE = 0,
+ SL_SYNC_SOURCE_GNBENB, // NR-CELL as sync source
+ SL_SYNC_SOURCE_GNSS, // GPS as sync source
+ SL_SYNC_SOURCE_SYNC_REF_UE, // another SYNC REF UE as sync source
+ SL_SYNC_SOURCE_LOCAL_TIMING, // if LOCAL UE timing is sync source , if above options are not available
+ SL_SYNC_SOURCE_MAX
+
+} sl_sync_source_enum_t ;
+
+
+typedef struct sl_nr_ue_bwp_config {
+
+  uint16_t sl_bwp_start; // BWP start RB
+  uint16_t sl_bwp_size;  // BWP Size in number of RBs
+  uint16_t sl_ssb_offset_point_a; // offset in REs from PointA to indicate SSB location
+  uint16_t sl_dc_location; // DC location in SL-BWP
+  uint8_t sl_num_symbols; // number of sidelink symbols in a non PSBCH sidelink slot
+  uint8_t sl_start_symbol;// start sidelink symbol in a non PSBCH sidelink slot
+  uint8_t  sl_scs; // sub carrier spacing of SL-BWP and SL-SSB
+  uint8_t  sl_cyclic_prefix; // cyclic prefix of SL-BWP and SL-SSB 0- normal, 1-extended which is not supported
+
+} sl_nr_bwp_config_t;
+
+typedef struct sl_nr_ue_sync_source_config {
+
+  // Sync source selected by the UE
+  sl_sync_source_enum_t sync_source;
+
+  // if GNSS is sync source - used in DFN calculation from GNSS timing
+  //field sl-OffsetDFN, Section 5.8.12 in 38.331
+  // value from 0 to 1000,
+  uint16_t gnss_dfn_offset;
+
+  //Only sent if sync_source is set to SYNC_SOURCE_SYNC_REF_UE
+  //Valid values can be 0-671
+  uint16_t rx_slss_id;
+
+} sl_nr_sync_source_config_t;
+
+typedef struct 
+{
+  // REference Rel16 38.101, 38.331
+  //For NR-Sidelink operation on PC5 interface
+  //Sidelink bandwidth configured - 10, 20, 30, and 40Mhz
+  uint16_t sl_bandwidth;
+  //Absolute frequency of SL point A in KHz
+  //n38 (2570-2620 Mhz), n47 (5855-5925 Mhz) are defined.
+  uint32_t sl_frequency;
+
+  //Only 1 SCS-SpecificCarrier allowed for NR-SL communication
+  uint16_t sl_grid_size;// bandwidth for each numerology
+  uint16_t sl_num_tx_ant;//Number of Tx antennae - value 1
+  uint16_t sl_num_rx_ant;//Number of Rx antennae - value 1
+
+  //Indicates presence of 7.5KHz frequency shift wrt LTE anchor cell.
+  //Value: 0 = false 1 = true
+  uint8_t  sl_frequency_shift_7p5khz;
+  //Indicates presence of +/-5Khz shift wrt FREF for V2X reference frequencies.
+  //Possible values: {-1,0,1}
+  uint8_t  sl_value_N;
+
+} sl_nr_carrier_config_t;
+
+
+typedef struct {
+  // Mask indicating which of the below configs are changed
+  // Bit0 - carrier_config, Bit1 - syncsource cfg
+  // Bit2 - tdd config, Bit3 - bwp config
+  uint32_t config_mask;
+
+  sl_nr_carrier_config_t sl_carrier_config;
+  sl_nr_sync_source_config_t sl_sync_source;
+  //TDD config either from SL-PRECONFIG or read from SL-MIB
+  //In case of TDD-config available from gNB, tdd_table from NR PHY config will be used
+  fapi_nr_tdd_table_t tdd_table;
+  //only 1 SL-BWP can be configured in REL16, REL17
+  sl_nr_bwp_config_t sl_bwp_config;
+
+} sl_nr_phy_config_request_t;
+
+
+#endif

openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.h

@@ -40,6 +40,7 @@
 #include "nfapi_nr_interface_scf.h"
 #include "openair2/NR_PHY_INTERFACE/NR_IF_Module.h"
 #include "NR_Packet_Drop.h"
+#include "nfapi/open-nFAPI/nfapi/public_inc/sidelink_nr_ue_interface.h"
 
 extern slot_rnti_mcs_s slot_rnti_mcs[NUM_NFAPI_SLOT];
 
@@ -110,6 +111,35 @@ typedef struct {
 
 } nr_uplink_indication_t;
 
+typedef struct {
+    /// module id
+    module_id_t module_id;
+    /// gNB index
+    uint32_t gNB_index;
+    /// component carrier id
+    int cc_id;
+    /// frame
+    frame_t frame_rx;
+    /// slot rx
+    uint32_t slot_rx;
+    /// frame tx
+    frame_t frame_tx;
+    /// slot tx
+    uint32_t slot_tx;
+
+    /// NR UE FAPI-like P7 message, direction: L1 to L2
+    /// data reception indication structure
+    sl_nr_rx_indication_t *rx_ind;
+
+    //SCI received by PHY sent to MAC here
+    sl_nr_sci_indication_t *sci_ind;
+
+    /// PHY specific data structure that can be passed on to L2 via nr_sidelink_indication_t and
+    /// back to L1 via the nr_scheduled_response_t
+    void *phy_data;
+} nr_sidelink_indication_t;
+
+
 // Downlink subframe P7
 
 
@@ -130,6 +160,12 @@ typedef struct {
     /// uplink transmission configuration request structure
     fapi_nr_ul_config_request_t *ul_config;
 
+    // Sidelink RX configuration request
+    sl_nr_rx_config_request_t *sl_rx_config;
+
+    // Sidelink TX configuration request
+    sl_nr_tx_config_request_t *sl_tx_config;
+
     /// data transmission request structure
     fapi_nr_tx_request_t *tx_request;
 
@@ -150,6 +186,18 @@ typedef struct {
 
 } nr_phy_config_t;
 
+typedef struct {
+    /// module id
+    uint8_t Mod_id;
+    /// component carrier id
+    uint8_t CC_id;
+
+    /// NR UE FAPI-like P5 message
+    /// physical layer configuration request structure
+    sl_nr_phy_config_request_t sl_config_req;
+
+} nr_sl_phy_config_t;
+
 typedef struct {
     /// module id
     uint8_t Mod_id;
@@ -170,6 +218,15 @@ typedef struct {
  */
 typedef int8_t (nr_ue_scheduled_response_f)(nr_scheduled_response_t *scheduled_response);
 
+/*
+ * Generic type of an application-defined callback to return various
+ * types of data to the application.
+ * EXPECTED RETURN VALUES:
+ *  -1: Failed to consume bytes. Abort the mission.
+ * Non-negative return values indicate success, and ignored.
+ */
+typedef int8_t (nr_sl_ue_scheduled_response_f)(nr_scheduled_response_t *sl_scheduled_response);
+
 
 /*
  * Generic type of an application-defined callback to return various
@@ -180,6 +237,15 @@ typedef int8_t (nr_ue_scheduled_response_f)(nr_scheduled_response_t *scheduled_r
  */
 typedef int8_t (nr_ue_phy_config_request_f)(nr_phy_config_t *phy_config);
 
+/*
+ * Generic type of an application-defined callback to return various
+ * types of data to the application.
+ * EXPECTED RETURN VALUES:
+ *  -1: Failed to consume bytes. Abort the mission.
+ * Non-negative return values indicate success, and ignored.
+ */
+typedef int8_t (nr_sl_ue_phy_config_request_f)(nr_sl_phy_config_t *sl_phy_config);
+
 /*
  * Generic type of an application-defined callback to return various
  * types of data to the application.
@@ -205,6 +271,16 @@ typedef int (nr_ue_dl_indication_f)(nr_downlink_indication_t *dl_info);
  */
 typedef int (nr_ue_ul_indication_f)(nr_uplink_indication_t *ul_info);
 
+
+/*
+ * Generic type of an application-defined callback to return various
+ * types of data to the application.
+ * EXPECTED RETURN VALUES:
+ *  -1: Failed to consume bytes. Abort the mission.
+ * Non-negative return values indicate success, and ignored.
+ */
+typedef int (nr_ue_sl_indication_f)(nr_sidelink_indication_t *sl_info);
+
 //  TODO check this stuff can be reuse of need modification
 typedef struct nr_ue_if_module_s {
   nr_ue_scheduled_response_f *scheduled_response;
@@ -212,6 +288,7 @@ typedef struct nr_ue_if_module_s {
   nr_ue_synch_request_f      *synch_request;
   nr_ue_dl_indication_f      *dl_indication;
   nr_ue_ul_indication_f      *ul_indication;
+  nr_ue_sl_indication_f      *sl_indication;
   uint32_t cc_mask;
   uint32_t current_frame;
   uint32_t current_slot;