Skip to content

O
OpenXG-RAN
Commit fe999623 authored by navid's avatar navid
Browse files
Options

* update bladerf api (now it respect the timing) 

* update the tx/rx bandwidth according to sampling rate 
* add openair2 stats


git-svn-id: http://svn.eurecom.fr/openair4G/trunk@7609 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 651a9252
Show whitespace changes
Inline Side-by-side
Showing with 336 additions and 231 deletions
openair2/LAYER2/MAC/defs.h
View file @ fe999623
......@@ -447,13 +447,20 @@ typedef struct {
//
uint32_t total_dlsch_pdus_tx;
// here for RX
//
uint32_t ulsch_bitrate;
//
uint32_t ulsch_bytes_rx;
//
uint64_t ulsch_pdus_rx;
// here for RX
uint32_t total_ulsch_bitrate;
//
uint32_t total_ulsch_bytes_rx;
//
uint32_t total_ulsch_pdus_rx;
} eNB_STATS;
/*! \brief eNB statistics for the connected UEs*/
typedef struct {
......@@ -490,12 +497,6 @@ typedef struct {
// total rb used for retransmission
uint32_t total_rbs_used_retx;
/// preassigned mcs after rate adaptation
uint8_t ulsch_mcs1;
/// adjusted mcs
uint8_t ulsch_mcs2;
/// TX
/// Num pkt
uint32_t num_pdu_tx[NB_RB_MAX];
......@@ -528,6 +529,12 @@ typedef struct {
// uint32_t avg_pdu_size;
/// RX
/// preassigned mcs after rate adaptation
uint8_t ulsch_mcs1;
/// adjusted mcs
uint8_t ulsch_mcs2;
/// estimated average pdu inter-departure time
uint32_t avg_pdu_idt;
/// estimated average pdu size
......@@ -536,6 +543,22 @@ typedef struct {
uint32_t aggregated_pdu_size;
uint32_t aggregated_pdu_arrival;
/// uplink transport block size
uint32_t ulsch_TBS;
/// total rb used for a new uplink transmission
uint32_t num_retransmission_rx;
/// total rb used for a new uplink transmission
uint32_t rbs_used_rx;
/// total rb used for a new uplink retransmission
uint32_t rbs_used_retx_rx;
/// total rb used for a new uplink transmission
uint32_t total_rbs_used_rx;
/// normalized rx power
int32_t normalized_rx_power;
/// target rx power
int32_t target_rx_power;
/// num rx pdu
uint32_t num_pdu_rx[NB_RB_MAX];
/// num bytes rx
......@@ -544,8 +567,19 @@ typedef struct {
// uint32_t tti_goodput[NB_RB_MAX];
/// errors
uint32_t num_errors_rx;
/// overall
uint64_t overhead_bytes_rx;
/// headers+ CE + padding bytes for a MAC PDU
uint64_t total_overhead_bytes_rx;
/// headers+ CE + padding bytes for a MAC PDU
uint64_t avg_overhead_bytes_rx;
//
uint32_t ulsch_bitrate;
//total
uint32_t total_ulsch_bitrate;
/// overall
/// MAC pdu bytes
uint64_t pdu_bytes_rx;
/// total MAC pdu bytes
uint64_t total_pdu_bytes_rx;
/// total num pdu
......
openair2/LAYER2/MAC/eNB_scheduler_ulsch.c
View file @ fe999623
......@@ -107,6 +107,9 @@ void rx_sdu(
payload_ptr = parse_ulsch_header(sduP,&num_ce,&num_sdu,rx_ces,rx_lcids,rx_lengths,sdu_lenP);
eNB->eNB_stats[CC_idP].ulsch_bytes_rx=sdu_lenP;
eNB->eNB_stats[CC_idP].total_ulsch_bytes_rx+=sdu_lenP;
eNB->eNB_stats[CC_idP].total_ulsch_pdus_rx+=1;
// control element
for (i=0; i<num_ce; i++) {
......@@ -343,7 +346,6 @@ void rx_sdu(
}
payload_ptr+=rx_lengths[i];
}
/* NN--> FK: we could either check the payload, or use a phy helper to detect a false msg3 */
......@@ -357,6 +359,7 @@ void rx_sdu(
}
}
} else {
UE_list->eNB_UE_stats[CC_idP][UE_id].pdu_bytes_rx=sdu_lenP;
UE_list->eNB_UE_stats[CC_idP][UE_id].total_pdu_bytes_rx+=sdu_lenP;
UE_list->eNB_UE_stats[CC_idP][UE_id].total_num_pdus_rx+=1;
}
......@@ -769,7 +772,9 @@ void schedule_ulsch_rnti(module_id_t module_idP,
ndi = 1-UE_template->oldNDI_UL[harq_pid];
UE_template->oldNDI_UL[harq_pid]=ndi;
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs2=UE_template->pre_assigned_mcs_ul;
UE_list->eNB_UE_stats[CC_id][UE_id].normalized_rx_power=normalized_rx_power;
UE_list->eNB_UE_stats[CC_id][UE_id].target_rx_power=target_rx_power;
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs1=UE_template->pre_assigned_mcs_ul;
mcs = cmin (UE_template->pre_assigned_mcs_ul, openair_daq_vars.target_ue_ul_mcs); // adjust, based on user-defined MCS
if (UE_template->pre_allocated_rb_table_index_ul >=0) {
......@@ -788,6 +793,8 @@ void schedule_ulsch_rnti(module_id_t module_idP,
}
TBS = mac_xface->get_TBS_UL(mcs,rb_table[rb_table_index]);
UE_list->eNB_UE_stats[CC_id][UE_id].total_rbs_used_rx+=rb_table[rb_table_index];
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_TBS=TBS;
buffer_occupancy -= TBS;
rballoc = mac_xface->computeRIV(frame_parms->N_RB_UL,
first_rb[CC_id],
......@@ -817,16 +824,21 @@ void schedule_ulsch_rnti(module_id_t module_idP,
}
LOG_D(MAC,"[eNB %d][PUSCH %d/%x] CC_id %d Frame %d subframeP %d Scheduled UE retransmission (mcs %d, first rb %d, nb_rb %d, TBS %d, harq_pid %d, round %d)\n",
LOG_D(MAC,"[eNB %d][PUSCH %d/%x] CC_id %d Frame %d subframeP %d Scheduled UE retransmission (mcs %d, first rb %d, nb_rb %d, harq_pid %d, round %d)\n",
module_idP,UE_id,rnti,CC_id,frameP,subframeP,mcs,
first_rb[CC_id],UE_template->nb_rb_ul[harq_pid],
TBS,//mac_xface->get_TBS_UL(mcs,UE_template->nb_rb_ul[harq_pid]),
harq_pid, round);
rballoc = mac_xface->computeRIV(frame_parms->N_RB_UL,
first_rb[CC_id],
UE_template->nb_rb_ul[harq_pid]);
first_rb[CC_id]+=UE_template->nb_rb_ul[harq_pid]; // increment for next UE allocation
UE_list->eNB_UE_stats[CC_id][UE_id].num_retransmission_rx+=1;
UE_list->eNB_UE_stats[CC_id][UE_id].rbs_used_retx_rx=UE_template->nb_rb_ul[harq_pid];
UE_list->eNB_UE_stats[CC_id][UE_id].total_rbs_used_rx+=UE_template->nb_rb_ul[harq_pid];
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs1=mcs;
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs2=mcs;
}
// Cyclic shift for DM RS
......
openair2/LAYER2/openair2_proc.c
View file @ fe999623
......@@ -102,23 +102,14 @@ int dump_eNB_l2_stats(char *buffer, int length)
eNB->eNB_stats[CC_id].total_bcch_buffer,
eNB->eNB_stats[CC_id].bcch_mcs);
len += sprintf(&buffer[len],"CCCH , NB_TX_MAC = %d, transmitted bytes (TTI %d, total %d) MCS (TTI %d)\n",
eNB->eNB_stats[CC_id].total_num_bcch_pdu,
eNB->eNB_stats[CC_id].bcch_buffer,
eNB->eNB_stats[CC_id].total_bcch_buffer,
eNB->eNB_stats[CC_id].bcch_mcs);
len += sprintf(&buffer[len],"DCCH , NB_TX_MAC = %d, transmitted bytes (TTI %d, total %d) MCS (TTI %d)\n",
eNB->eNB_stats[CC_id].total_num_bcch_pdu,
eNB->eNB_stats[CC_id].bcch_buffer,
eNB->eNB_stats[CC_id].total_bcch_buffer,
eNB->eNB_stats[CC_id].bcch_mcs);
eNB->eNB_stats[CC_id].dlsch_bitrate=((eNB->eNB_stats[CC_id].dlsch_bytes_tx*8)/((eNB->frame + 1)*10));
eNB->eNB_stats[CC_id].total_dlsch_pdus_tx+=eNB->eNB_stats[CC_id].dlsch_pdus_tx;
eNB->eNB_stats[CC_id].total_dlsch_bytes_tx+=eNB->eNB_stats[CC_id].dlsch_bytes_tx;
eNB->eNB_stats[CC_id].total_dlsch_bitrate=((eNB->eNB_stats[CC_id].total_dlsch_bytes_tx*8)/((eNB->frame + 1)*10));
eNB->eNB_stats[CC_id].ulsch_bitrate=((eNB->eNB_stats[CC_id].ulsch_bytes_rx*8)/((eNB->frame + 1)*10));
eNB->eNB_stats[CC_id].total_ulsch_bitrate=((eNB->eNB_stats[CC_id].total_ulsch_bytes_rx*8)/((eNB->frame + 1)*10));
len += sprintf(&buffer[len],"DLSCH bitrate (TTI %u, avg %u) kbps, Transmitted bytes (TTI %u, total %u), Transmitted PDU (TTI %u, total %u) \n",
eNB->eNB_stats[CC_id].dlsch_bitrate,
eNB->eNB_stats[CC_id].total_dlsch_bitrate,
......@@ -126,6 +117,14 @@ int dump_eNB_l2_stats(char *buffer, int length)
eNB->eNB_stats[CC_id].total_dlsch_bytes_tx,
eNB->eNB_stats[CC_id].dlsch_pdus_tx,
eNB->eNB_stats[CC_id].total_dlsch_pdus_tx);
len += sprintf(&buffer[len],"ULSCH bitrate (TTI %u, avg %u) kbps, Received bytes (TTI %u, total %u), Received PDU (TTI %u, total %lu) \n",
eNB->eNB_stats[CC_id].ulsch_bitrate,
eNB->eNB_stats[CC_id].total_ulsch_bitrate,
eNB->eNB_stats[CC_id].ulsch_bytes_rx,
eNB->eNB_stats[CC_id].total_ulsch_bytes_rx,
eNB->eNB_stats[CC_id].ulsch_pdus_rx,
eNB->eNB_stats[CC_id].total_ulsch_pdus_rx);
}
len += sprintf(&buffer[len],"\n");
......@@ -133,12 +132,16 @@ int dump_eNB_l2_stats(char *buffer, int length)
for (UE_id=UE_list->head; UE_id>=0; UE_id=UE_list->next[UE_id]) {
for (i=0; i<UE_list->numactiveCCs[UE_id]; i++) {
CC_id=UE_list->ordered_CCids[i][UE_id];
UE_list->eNB_UE_stats[CC_id][UE_id].dlsch_bitrate=((UE_list->eNB_UE_stats[CC_id][UE_id].TBS*8)/((eNB->frame + 1)*10));
UE_list->eNB_UE_stats[CC_id][UE_id].total_dlsch_bitrate= ((UE_list->eNB_UE_stats[CC_id][UE_id].total_pdu_bytes*8)/((eNB->frame + 1)*10));
UE_list->eNB_UE_stats[CC_id][UE_id].total_overhead_bytes+= UE_list->eNB_UE_stats[CC_id][UE_id].overhead_bytes;
UE_list->eNB_UE_stats[CC_id][UE_id].avg_overhead_bytes=((UE_list->eNB_UE_stats[CC_id][UE_id].total_overhead_bytes*8)/((eNB->frame + 1)*10));
len += sprintf(&buffer[len],"UE %d %s, RNTI %x : CQI %d, MCS1 %d, MCS2 %d, RB (tx %d, retx %d, total %d), ncce (tx %d, retx %d) \n",
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_bitrate=((UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_TBS*8)/((eNB->frame + 1)*10));
UE_list->eNB_UE_stats[CC_id][UE_id].total_ulsch_bitrate= ((UE_list->eNB_UE_stats[CC_id][UE_id].total_pdu_bytes_rx*8)/((eNB->frame + 1)*10));
len += sprintf(&buffer[len],"UE %d %s (DLSCH), RNTI %x : CQI %d, MCS1 %d, MCS2 %d, RB (tx %d, retx %d, total %d), ncce (tx %d, retx %d) \n",
UE_id,
map_int_to_str(rrc_status_names, UE_list->eNB_UE_stats[CC_id][UE_id].rrc_status),
UE_list->eNB_UE_stats[CC_id][UE_id].crnti,
......@@ -165,12 +168,30 @@ int dump_eNB_l2_stats(char *buffer, int length)
UE_list->eNB_UE_stats[CC_id][UE_id].total_overhead_bytes,
UE_list->eNB_UE_stats[CC_id][UE_id].avg_overhead_bytes
);
len += sprintf(&buffer[len],"UE %d %s (ULSCH), RNTI %x : rx power (normalized %d, target %d), MCS (pre %d, post %d), RB (rx %d, retx %d, total %d), Current TBS %d \n",
UE_id,
map_int_to_str(rrc_status_names, UE_list->eNB_UE_stats[CC_id][UE_id].rrc_status),
UE_list->eNB_UE_stats[CC_id][UE_id].crnti,
UE_list->eNB_UE_stats[CC_id][UE_id].normalized_rx_power,
UE_list->eNB_UE_stats[CC_id][UE_id].target_rx_power,
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs1,
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_mcs2,
UE_list->eNB_UE_stats[CC_id][UE_id].rbs_used_rx,
UE_list->eNB_UE_stats[CC_id][UE_id].rbs_used_retx_rx,
UE_list->eNB_UE_stats[CC_id][UE_id].total_rbs_used_rx,
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_TBS
);
len += sprintf(&buffer[len],
"[MAC] ULSCH received bytes (total %"PRIu64"),"
"[MAC] ULSCH bitrate (TTI %d, avg %d), received bytes (total %"PRIu64"),"
"Total received PDU %d, Total errors %d\n",
UE_list->eNB_UE_stats[CC_id][UE_id].ulsch_bitrate,
UE_list->eNB_UE_stats[CC_id][UE_id].total_ulsch_bitrate,
UE_list->eNB_UE_stats[CC_id][UE_id].total_pdu_bytes_rx,
UE_list->eNB_UE_stats[CC_id][UE_id].total_num_pdus_rx,
UE_list->eNB_UE_stats[CC_id][UE_id].num_errors_rx);
len+= sprintf(&buffer[len],"Received PHR PH = %d (db)\n", UE_list->UE_template[CC_id][UE_id].phr_info);
len+= sprintf(&buffer[len],"Received BSR LCGID[0][1][2][3] = %u %u %u %u\n",
UE_list->UE_template[CC_id][UE_id].bsr_info[LCGID0],
......
openair2/RRC/LITE/rrc_UE.c
View file @ fe999623
......@@ -710,7 +710,7 @@ rrc_ue_establish_drb(
RADIO_ACCESS_BEARER,Rlc_info_um);
*/
#ifdef PDCP_USE_NETLINK
# if !defined(OAI_NW_DRIVER_TYPE_ETHERNET) && !defined(EXMIMO) && !defined(OAI_USRP) && !defined(LINK_ENB_PDCP_TO_GTPV1U)
# if !defined(OAI_NW_DRIVER_TYPE_ETHERNET) && !defined(EXMIMO) && !defined(OAI_USRP) && !defined(OAI_BLADERF) && !defined(LINK_ENB_PDCP_TO_GTPV1U)
# ifdef OAI_EMU
ip_addr_offset3 = oai_emulation.info.nb_enb_local;
ip_addr_offset4 = NB_eNB_INST;
......
openair2/RRC/LITE/rrc_eNB.c
View file @ fe999623
......@@ -3005,7 +3005,7 @@ rrc_eNB_process_RRCConnectionReconfigurationComplete(
ctxt_pP->module_id, ctxt_pP->frame, (int)DRB_configList->list.array[i]->drb_Identity);
#if defined(PDCP_USE_NETLINK) && !defined(LINK_ENB_PDCP_TO_GTPV1U)
// can mean also IPV6 since ether -> ipv6 autoconf
# if !defined(OAI_NW_DRIVER_TYPE_ETHERNET) && !defined(EXMIMO) && !defined(OAI_USRP)
# if !defined(OAI_NW_DRIVER_TYPE_ETHERNET) && !defined(EXMIMO) && !defined(OAI_USRP) && !defined(OAI_BLADERF)
LOG_I(OIP, "[eNB %d] trying to bring up the OAI interface oai%d\n",
ctxt_pP->module_id,
ctxt_pP->module_id);
......
targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.c
View file @ fe999623
......@@ -37,142 +37,98 @@
#include <stdlib.h>
#include <inttypes.h>
#include "bladerf_lib.h"
#include "common_lib.h"
#include "log.h"
#define SAMPLE_LEN samples_per_frame*sizeof(int32_t)
int num_devices=0;
/*These items configure the underlying asynch stream used by the the sync interface.
*/
unsigned int num_buffers;
unsigned int buffer_size;
unsigned int num_transfers;
unsigned int timeout_ms;
int trx_brf_init(openair0_device *openair0) {
}
struct bladerf * open_bladerf_from_serial(const char *serial) {
openair0_timestamp trx_get_timestamp(openair0_device *device) {
int status;
struct bladerf *dev;
struct bladerf_devinfo info;
/* Initialize all fields to "don't care" wildcard values.
*
* Immediately passing this to bladerf_open_with_devinfo() would cause
* libbladeRF to open any device on any available backend. */
bladerf_init_devinfo(&info);
/* Specify the desired device's serial number, while leaving all other
* fields in the info structure wildcard values */
strncpy(info.serial, serial, BLADERF_SERIAL_LENGTH - 1);
info.serial[BLADERF_SERIAL_LENGTH - 1] = '\0';
status = bladerf_open_with_devinfo(&dev, &info);
struct bladerf_metadata meta;
brf_state_t *brf = (brf_state_t*)device->priv;
if (status == BLADERF_ERR_NODEV) {
printf("No devices available with serial=%s\n", serial);
return NULL;
} else if (status != 0) {
fprintf(stderr, "Failed to open device with serial=%s (%s)\n", serial, bladerf_strerror(status));
return NULL;
if ((status=bladerf_get_timestamp(brf->dev, BLADERF_MODULE_TX, &meta.timestamp)) != 0) {
fprintf(stderr,"Failed to get current RX timestamp: %s\n",bladerf_strerror(status));
} else {
return dev;
printf("Current TX timestampe 0x%016"PRIx64"\n", meta.timestamp);
}
return meta.timestamp;
}
int trx_brf_start(openair0_device *openair0) {
return 0;
}
int trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc) {
static void trx_brf_write(openair0_device *device,openair0_timestamp ptimestamp, void **buff, int nsamps, int cc) {
int status;
struct bladerf_metadata meta;
int16_t zeros[] = { 0, 0, 0, 0 };
struct bladerf *dev = (struct bladerf*) device->priv;
openair0_timestamp current_timestamp;
brf_state_t *brf = (brf_state_t*)device->priv;
/* BRF has only 1 rx/tx chaine : is it correct? */
void *sample = (void*)buff[0];
memset(&meta, 0, sizeof(meta));
/* Retrieve the current timestamp */
#ifdef BRF_TEST
if ((status=bladerf_get_timestamp(dev, BLADERF_MODULE_TX, &meta.timestamp)) != 0) {
fprintf(stderr,"Failed to get current RX timestamp: %s\n",bladerf_strerror(status));
} else {
current_timestamp = meta.timestamp;
printf("Current TX timestampe 0x%016"PRIx64" and current timestamp: 0x%016"PRIx64"\n", ptimestamp, meta.timestamp);
}
#endif
meta.timestamp= ptimestamp;
void *samples = (void*)buff[0];
brf->meta_tx.timestamp= ptimestamp;
//brf->meta_tx.flags |= BLADERF_META_FLAG_TX_NOW;
meta.flags |= BLADERF_META_FLAG_TX_NOW;
status = bladerf_sync_tx(brf->dev, samples, (unsigned int) nsamps, &brf->meta_tx, brf->timeout_ms);
status = bladerf_sync_tx(dev, sample, nsamps, &meta, timeout_ms);
if (status != 0) {
fprintf(stderr, "Failed to TX sample: %s\n", bladerf_strerror(status));
brf->num_tx_errors++;
brf_error(status);
}
}
int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
static int trx_brf_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc) {
int status, ret;
struct bladerf_metadata meta;
unsigned int i;
struct bladerf *dev = (struct bladerf*) device->priv;
/* BRF has only onerx/tx chain: is it correct? */
void *sample = (void*)buff[0];
memset(&meta, 0, sizeof(meta));
/* Retrieve the current timestamp */
if ((status=bladerf_get_timestamp(dev, BLADERF_MODULE_RX, &meta.timestamp)) != 0) {
fprintf(stderr,"Failed to get current RX timestamp: %s\n",bladerf_strerror(status));
} else {
*ptimestamp = meta.timestamp;
printf("Current RX timestamp: 0x%016"PRIx64"\n", meta.timestamp);
}
brf_state_t *brf = (brf_state_t*)device->priv;
meta.flags |= BLADERF_META_FLAG_RX_NOW;
//fflush(stdout);
// BRF has only one rx/tx chain
void *samples = (void*)buff[0];
status = bladerf_sync_rx(dev, sample, nsamps, &meta, timeout_ms);
brf->meta_rx.flags |= BLADERF_META_FLAG_RX_NOW;
status = bladerf_sync_rx(brf->dev, samples, (unsigned int) nsamps, &brf->meta_rx, brf->timeout_ms);
/* if (meta.actual_count < nsamps ) {
printf("[BRF][RX] received %d samples out of %d\n", meta.actual_count, nsamps);
}
*/
if (status != 0) {
fprintf(stderr, "RX failed: %s\n", bladerf_strerror(status));
} else if (meta.status & BLADERF_META_STATUS_OVERRUN) {
fprintf(stderr, "Overrun detected in RX. %u valid samples were read (nsymps %d)\n", meta.actual_count,nsamps);
} else if (meta.status & BLADERF_META_STATUS_UNDERRUN) {
fprintf(stderr, "Underrun detected in RX. %u valid samples were read (nsymps %d) \n", meta.actual_count,nsamps);
}else {
printf("Got %u samples at t=0x%016"PRIx64"\n", meta.actual_count, meta.timestamp);
}
brf->num_rx_errors++;
} else if ( brf->meta_rx.status & BLADERF_META_STATUS_OVERRUN) {
brf->num_overflows++;
fprintf(stderr, "RX overrun (%d) in read @ t=0x%"PRIu64". Got %u samples. nsymps %d\n",
brf->num_overflows,brf->meta_rx.timestamp, brf->meta_rx.actual_count, nsamps);
//brf->meta_rx.timestamp=(unsigned int)(nsamps-brf->meta_rx.actual_count);
} //else printf("[BRF] (buff %p) ts=0x%"PRIu64" %s\n",samples, brf->meta_rx.timestamp,bladerf_strerror(status));
brf->rx_actual_count+=brf->meta_rx.actual_count;
brf->rx_count+=nsamps;
*ptimestamp = brf->meta_rx.timestamp;
return meta.actual_count;
return brf->meta_rx.actual_count;
}
int trx_brf_end(openair0_device *device) {
int status;
struct bladerf *dev = (struct bladerf*) device->priv;
brf_state_t *brf = (brf_state_t*)device->priv;
// Disable RX module, shutting down our underlying RX stream
if ((status=bladerf_enable_module(device->priv, BLADERF_MODULE_RX, false)) != 0) {
if ((status=bladerf_enable_module(brf->dev, BLADERF_MODULE_RX, false)) != 0) {
fprintf(stderr, "Failed to disable RX module: %s\n", bladerf_strerror(status));
}
if ((status=bladerf_enable_module(device->priv, BLADERF_MODULE_TX, false)) != 0) {
if ((status=bladerf_enable_module(brf->dev, BLADERF_MODULE_TX, false)) != 0) {
fprintf(stderr, "Failed to disable TX module: %s\n", bladerf_strerror(status));
}
bladerf_close(dev);
bladerf_close(brf->dev);
return 0;
}
......@@ -181,108 +137,130 @@ int openair0_device_init(openair0_device *device, openair0_config_t *openair0_cf
int status;
int card=0;
//struct bladerf_version *version;
//printf("Opening the brf device (version %s)...\n", bladerf_version(version));
// opaque data struct
struct bladerf *dev;// = (struct bladerf*)malloc(sizeof(struct bladerf));
//memset(dev, 0, sizeof(struct bladerf));
// An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
brf_state_t *brf = (brf_state_t*)malloc(sizeof(brf_state_t));
memset(brf, 0, sizeof(brf_state_t));
// init required params for BRF
num_buffers = 16;
buffer_size = openair0_cfg[card]. samples_per_packet*sizeof(int32_t); // buffer size = 4096 for sample_len of 1024
num_transfers = 8; // ? device->openair0_cfg.samples_per_packets
timeout_ms = 1; // or 0/
brf->num_buffers = 128;
brf->buffer_size = (unsigned int)openair0_cfg[card].samples_per_packet*sizeof(int32_t); // buffer size = 4096 for sample_len of 1024
brf->num_transfers = 16;
brf->timeout_ms = 0;
brf->sample_rate=(unsigned int)openair0_cfg[card].sample_rate;
printf("the buffer_size is set to %d\n", buffer_size);
printf("\n[BRF] sampling_rate %d, num_buffers %d, buffer_size %d, num transfer %d, timeout_ms %d\n",
brf->sample_rate, brf->num_buffers, brf->buffer_size,brf->num_transfers, brf->timeout_ms);
if ((status=bladerf_open(&dev, "")) != 0 ) {
if ((status=bladerf_open(&brf->dev, "")) != 0 ) {
fprintf(stderr,"Failed to open brf device: %s\n",bladerf_strerror(status));
brf_error(status);
}
printf("[BRF] device speed is %d\n",bladerf_device_speed(dev) );
printf("[BRF] init dev %p\n", brf->dev);
switch(bladerf_device_speed(brf->dev)){
case BLADERF_DEVICE_SPEED_SUPER:
printf("[BRF] Device operates at max speed\n");
break;
default:
printf("[BRF] Device does not operates at max speed, change the USB port\n");
brf_error(BLADERF_ERR_UNSUPPORTED);
}
// RX
// Example of CLI output: RX Frequency: 2539999999Hz
if ((status=bladerf_set_frequency(dev, BLADERF_MODULE_RX, openair0_cfg[card].rx_freq[0])) != 0){
if ((status=bladerf_set_frequency(brf->dev, BLADERF_MODULE_RX, (unsigned int) openair0_cfg[card].rx_freq[0])) != 0){
fprintf(stderr,"Failed to set RX frequency: %s\n",bladerf_strerror(status));
brf_error(status);
}
// RX sample rate: 7680000 0/1
if ((status=bladerf_set_sample_rate(dev, BLADERF_MODULE_RX, openair0_cfg[card].sample_rate, NULL)) != 0){
} else
printf("[BRF] set RX frequency to %f\n",openair0_cfg[card].rx_freq[0]);
if ((status=bladerf_set_sample_rate(brf->dev, BLADERF_MODULE_RX, (unsigned int)openair0_cfg[card].sample_rate, NULL)) != 0){
fprintf(stderr,"Failed to set RX sample rate: %s\n", bladerf_strerror(status));
brf_error(status);
}
// RX Bandwidth: 14000000Hz
if ((status=bladerf_set_bandwidth(dev, BLADERF_MODULE_RX, openair0_cfg[card].rx_bw, NULL)) != 0){
}else
printf("[BRF] set RX sample rate to %f\n",openair0_cfg[card].sample_rate);
if ((status=bladerf_set_bandwidth(brf->dev, BLADERF_MODULE_RX, (unsigned int) openair0_cfg[card].rx_bw, NULL)) != 0){
fprintf(stderr,"Failed to set RX bandwidth: %s\n", bladerf_strerror(status));
brf_error(status);
}
// desired gain = 16
if ((status=bladerf_set_gain(dev, BLADERF_MODULE_RX, openair0_cfg[card].rx_gain[0])) != 0) {
}else
printf("[BRF] set RX bandwidth to %f\n",openair0_cfg[card].rx_bw);
if ((status=bladerf_set_gain(brf->dev, BLADERF_MODULE_RX, (int) openair0_cfg[card].rx_gain[0])) != 0) {
fprintf(stderr,"Failed to set RX gain: %s\n",bladerf_strerror(status));
brf_error(status);
}
} else
printf("[BRF] set RX gain to %f\n",openair0_cfg[card].rx_gain[0]);
/* Configure the device's RX module for use with the sync interface.
* SC16 Q11 samples *with* metadata are used. */
if ((status=bladerf_sync_config(dev, BLADERF_MODULE_RX, BLADERF_FORMAT_SC16_Q11_META,num_buffers,buffer_size,num_transfers,timeout_ms)) != 0 ) {
if ((status=bladerf_sync_config(brf->dev, BLADERF_MODULE_RX, BLADERF_FORMAT_SC16_Q11_META,brf->num_buffers,brf->buffer_size,brf->num_transfers,brf->timeout_ms)) != 0 ) {
fprintf(stderr,"Failed to configure RX sync interface: %s\n", bladerf_strerror(status));
brf_error(status);
}
}else
printf("[BRF] configured Rx for sync interface \n");
/* We must always enable the RX module after calling bladerf_sync_config(), and
* before attempting to RX samples via bladerf_sync_rx(). */
if ((status=bladerf_enable_module(dev, BLADERF_MODULE_RX, true)) != 0) {
if ((status=bladerf_enable_module(brf->dev, BLADERF_MODULE_RX, true)) != 0) {
fprintf(stderr,"Failed to enable RX module: %s\n", bladerf_strerror(status));
brf_error(status);
}
}else
printf("[BRF] RX module enabled \n");
// TX
if ((status=bladerf_set_frequency(dev, BLADERF_MODULE_TX, openair0_cfg[card].tx_freq[0])) != 0){
if ((status=bladerf_set_frequency(brf->dev, BLADERF_MODULE_TX, (unsigned int) openair0_cfg[card].tx_freq[0])) != 0){
fprintf(stderr,"Failed to set TX frequency: %s\n",bladerf_strerror(status));
brf_error(status);
}
if ((status=bladerf_set_sample_rate(dev, BLADERF_MODULE_TX, openair0_cfg[card].sample_rate, NULL)) != 0){
}else
printf("[BRF] set Tx Frequenct to %f \n", openair0_cfg[card].tx_freq[0]);
if ((status=bladerf_set_sample_rate(brf->dev, BLADERF_MODULE_TX, (unsigned int) openair0_cfg[card].sample_rate, NULL)) != 0){
fprintf(stderr,"Failed to set TX sample rate: %s\n", bladerf_strerror(status));
brf_error(status);
}
if ((status=bladerf_set_bandwidth(dev, BLADERF_MODULE_TX,openair0_cfg[card].tx_bw, NULL)) != 0){
}else
printf("[BRF] set Tx sampling rate to %f \n", openair0_cfg[card].sample_rate);
if ((status=bladerf_set_bandwidth(brf->dev, BLADERF_MODULE_TX,(unsigned int)openair0_cfg[card].tx_bw, NULL)) != 0){
fprintf(stderr, "Failed to set RX bandwidth: %s\n", bladerf_strerror(status));
brf_error(status);
}
if ((status=bladerf_set_gain(dev, BLADERF_MODULE_TX, openair0_cfg[card].tx_gain[0])) != 0) {
}else
printf("[BRF] set Tx sampling ratebandwidth to %f \n", openair0_cfg[card].tx_bw);
if ((status=bladerf_set_gain(brf->dev, BLADERF_MODULE_TX, (int)openair0_cfg[card].tx_gain[0])) != 0) {
fprintf(stderr,"Failed to set TX gain: %s\n",bladerf_strerror(status));
brf_error(status);
}
}else
printf("[BRF] set the Tx gain to %f \n", openair0_cfg[card].tx_gain[0]);
/* Configure the device's TX module for use with the sync interface.
* SC16 Q11 samples *with* metadata are used. */
if ((status=bladerf_sync_config(dev, BLADERF_MODULE_TX,BLADERF_FORMAT_SC16_Q11_META,num_buffers,buffer_size,num_transfers,timeout_ms)) != 0 ) {
if ((status=bladerf_sync_config(brf->dev, BLADERF_MODULE_TX,BLADERF_FORMAT_SC16_Q11_META,brf->num_buffers,brf->buffer_size,brf->num_transfers,brf->timeout_ms)) != 0 ) {
fprintf(stderr,"Failed to configure TX sync interface: %s\n", bladerf_strerror(status));
brf_error(status);
}
}else
printf("[BRF] configured tx for sync interface \n");
/* We must always enable the TX module after calling bladerf_sync_config(), and
* before attempting to TX samples via bladerf_sync_tx(). */
if ((status=bladerf_enable_module(dev, BLADERF_MODULE_TX, true)) != 0) {
if ((status=bladerf_enable_module(brf->dev, BLADERF_MODULE_TX, true)) != 0) {
fprintf(stderr,"Failed to enable TX module: %s\n", bladerf_strerror(status));
brf_error(status);
}
} else
printf("[BRF] RX module enabled \n");
bladerf_log_set_verbosity(get_brf_log_level(openair0_cfg[card].log_level));
printf("BLADERF: Initializing openair0_device\n");
device->priv = dev;
device->priv = brf;
device->Mod_id = num_devices++;
device->trx_start_func = trx_brf_start;
device->trx_end_func = trx_brf_end;
device->trx_read_func = trx_brf_read;
device->trx_write_func = trx_brf_write;
memcpy((void*)&device->openair0_cfg,(void*)openair0_cfg,sizeof(openair0_config_t));
return 0;
}
void brf_error(int status) {
......@@ -290,9 +268,49 @@ void brf_error(int status) {
exit(-1);
}
int openair0_stop(int card) {
return(0);
}
int openair0_set_frequencies(openair0_device* device, openair0_config_t *openair0_cfg,int dummy) {
return 0;
}
int openair0_set_rx_frequencies(openair0_device* device, openair0_config_t *openair0_cfg) {
return 0;
}
struct bladerf * open_bladerf_from_serial(const char *serial) {
int status;
struct bladerf *dev;
struct bladerf_devinfo info;
/* Initialize all fields to "don't care" wildcard values.
*
* Immediately passing this to bladerf_open_with_devinfo() would cause
* libbladeRF to open any device on any available backend. */
bladerf_init_devinfo(&info);
/* Specify the desired device's serial number, while leaving all other
* fields in the info structure wildcard values */
strncpy(info.serial, serial, BLADERF_SERIAL_LENGTH - 1);
info.serial[BLADERF_SERIAL_LENGTH - 1] = '\0';
status = bladerf_open_with_devinfo(&dev, &info);
if (status == BLADERF_ERR_NODEV) {
printf("No devices available with serial=%s\n", serial);
return NULL;
} else if (status != 0) {
fprintf(stderr, "Failed to open device with serial=%s (%s)\n", serial, bladerf_strerror(status));
return NULL;
} else {
return dev;
}
}
int get_brf_log_level(int log_level){
int level=BLADERF_LOG_LEVEL_INFO;
return BLADERF_LOG_LEVEL_DEBUG;
switch(log_level) {
case LOG_DEBUG:
level=BLADERF_LOG_LEVEL_DEBUG;
......
targets/ARCH/BLADERF/USERSPACE/LIB/bladerf_lib.h
View file @ fe999623
......@@ -33,44 +33,47 @@
*/
#include <libbladeRF.h>
/*
enum brf_err_num{
BLADERF_ERR_MIN=0,
BLADERF_ERR_UNEXPECTED=-1,
BLADERF_ERR_RANGE=-2,
BLADERF_ERR_INVAL=-3,
BLADERF_ERR_MEM=-4,
BLADERF_ERR_IO=-5,
BLADERF_ERR_TIMEOUT=-6,
BLADERF_ERR_NODEV=-7,
BLADERF_ERR_UNSUPPORTED=-8,
BLADERF_ERR_MISALIGNED=-9,
BLADERF_ERR_CHECKSUM=-10,
BLADERF_ERR_NO_FILE=-11,
BLADERF_ERR_UPDATE_FPGA=-12,
BLADERF_ERR_UPDATE_FW=-13,
BLADERF_ERR_TIME_PAST=-14,
BLADERF_ERR_MAX=-15,
}
mapping brf_err_names[] = {
{"BLADERF_OK", BLADERF_ERR_MIN},
{"BLADERF_ERR_UNEXPECTED",BLADERF_ERR_UNEXPECTED},
{"BLADERF_ERR_RANGE",BLADERF_ERR_RANGE},
{"BLADERF_ERR_INVAL",BLADERF_ERR_INVAL},
{"BLADERF_ERR_MEM",BLADERF_ERR_MEM},
{"BLADERF_ERR_IO",BLADERF_ERR_IO},
{"BLADERF_ERR_TIMEOUT",BLADERF_ERR_TIMEOUT},
{"BLADERF_ERR_NODEV",BLADERF_ERR_NODEV},
{"BLADERF_ERR_UNSUPPORTED",BLADERF_ERR_UNSUPPORTED},
{"BLADERF_ERR_MISALIGNED",BLADERF_ERR_MISALIGNED},
{"BLADERF_ERR_CHECKSUM",BLADERF_ERR_CHECKSUM},
{"BLADERF_ERR_NO_FILE",BLADERF_ERR_NO_FILE},
{"BLADERF_ERR_UPDATE_FPGA",BLADERF_ERR_UPDATE_FPGA},
{"BLADERF_ERR_UPDATE_FW",BLADERF_ERR_UPDATE_FW},
{"BLADERF_ERR_TIME_PAST",BLADERF_ERR_TIME_PAST},
{NULL, BLADERF_ERR_MAX}
};
*/
#include "common_lib.h"
#include "log.h"
typedef struct {
// opaque BRF data struct
struct bladerf *dev;
// An empty ("") or NULL device identifier will result in the first encountered device being opened (using the first discovered backend)
unsigned int num_buffers;
unsigned int buffer_size;
unsigned int num_transfers;
unsigned int timeout_ms;
struct bladerf_metadata meta_rx;
struct bladerf_metadata meta_tx;
unsigned int sample_rate;
// time offset between transmiter timestamp and receiver timestamp;
double tdiff;
// use brf_time_offset to get this value
int tx_forward_nsamps; //166 for 20Mhz
// --------------------------------
// Debug and output control
// --------------------------------
int num_underflows;
int num_overflows;
int num_seq_errors;
int num_rx_errors;
int num_tx_errors;
uint64_t tx_actual_count;
uint64_t rx_actual_count;
uint64_t tx_count;
uint64_t rx_count;
openair0_timestamp rx_timestamp;
} brf_state_t;
/*
* func prototypes
*/
......
targets/RT/USER/lte-softmodem.c
View file @ fe999623
......@@ -292,7 +292,7 @@ char ref[128] = "internal";
char channels[128] = "0";
unsigned int samples_per_frame = 307200;
unsigned int tx_forward_nsamps;
unsigned int tx_forward_nsamps=0;
int tx_delay;
#endif
......@@ -990,12 +990,16 @@ void do_OFDM_mod_rt(int subframe,PHY_VARS_eNB *phy_vars_eNB)
((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[0]=
#ifdef EXMIMO
((short*)dummy_tx_b)[2*i]<<4;
#elif OAI_BLADRF
((short*)dummy_tx_b)[2*i];
#else
((short*)dummy_tx_b)[2*i]<<5;
#endif
((short*)&phy_vars_eNB->lte_eNB_common_vars.txdata[0][aa][tx_offset])[1]=
#ifdef EXMIMO
((short*)dummy_tx_b)[2*i+1]<<4;
#elif OAI_BLADRF
((short*)dummy_tx_b)[2*i+1];
#else
((short*)dummy_tx_b)[2*i+1]<<5;
#endif
......@@ -1078,7 +1082,7 @@ static void* eNB_thread_tx( void* param )
return &eNB_thread_tx_status[proc->subframe];
}
LOG_I( HW, "[SCHED] eNB TX deadline thread %d(tid %ld) started on CPU %d\n", proc->subframe, gettid(), sched_getcpu() );
LOG_I( HW, "[SCHED] eNB TX deadline thread %d(Tid %ld) started on CPU %d\n", proc->subframe, gettid(), sched_getcpu() );
#else
LOG_I( HW, "[SCHED][eNB] TX thread %d started on CPU %d TID %d\n", proc->subframe, sched_getcpu(),gettid() );
#endif
......@@ -1256,8 +1260,8 @@ static void* eNB_thread_rx( void* param )
/* This creates a 2ms reservation every 10ms period*/
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 0.9 * 1000000; // each rx thread must finish its job in the worst case in 2ms
attr.sched_deadline = 2 * 1000000; // each rx thread will finish within 2ms
attr.sched_runtime = 1 * 1000000; // each rx thread must finish its job in the worst case in 2ms
attr.sched_deadline = 1 * 1000000; // each rx thread will finish within 2ms
attr.sched_period = 1 * 10000000; // each rx thread has a period of 10ms from the starting point
if (sched_setattr(0, &attr, flags) < 0 ) {
......@@ -1265,7 +1269,7 @@ static void* eNB_thread_rx( void* param )
return &eNB_thread_rx_status[proc->subframe];
}
LOG_I( HW, "[SCHED] eNB RX deadline thread %d(id %ld) started on CPU %d\n", proc->subframe, gettid(), sched_getcpu() );
LOG_I( HW, "[SCHED] eNB RX deadline thread %d(TID %ld) started on CPU %d\n", proc->subframe, gettid(), sched_getcpu() );
#else
LOG_I( HW, "[SCHED][eNB] RX thread %d started on CPU %d TID %d\n", proc->subframe, sched_getcpu(),gettid() );
#endif
......@@ -1573,8 +1577,8 @@ static void* eNB_thread( void* arg )
/* This creates a .5 ms reservation */
attr.sched_policy = SCHED_DEADLINE;
attr.sched_runtime = 0.1 * 1000000;
attr.sched_deadline = 0.5 * 1000000;
attr.sched_runtime = 0.2 * 1000000;
attr.sched_deadline = 0.9 * 1000000;
attr.sched_period = 1.0 * 1000000;
......@@ -1769,9 +1773,10 @@ static void* eNB_thread( void* arg )
stop_meas( &softmodem_stats_hw );
clock_gettime( CLOCK_MONOTONIC, &trx_time1 );
if (frame > 10){
if (rxs != spp)
exit_fun( "problem receiving samples" );
}
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME( VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ, 0 );
// Transmit TX buffer based on timestamp from RX
......@@ -2798,7 +2803,6 @@ int main( int argc, char **argv )
}
dump_frame_parms(frame_parms[0]);
if(frame_parms[0]->N_RB_DL == 100) {
......@@ -2807,6 +2811,8 @@ int main( int argc, char **argv )
#ifndef EXMIMO
openair0_cfg[0].samples_per_packet = 2048;
samples_per_frame = 307200;
openair0_cfg[card].tx_bw = 10e6;
openair0_cfg[card].rx_bw = 10e6;
// from usrp_time_offset
tx_forward_nsamps = 175;
tx_delay = 8;
......@@ -2817,6 +2823,8 @@ int main( int argc, char **argv )
#ifndef EXMIMO
openair0_cfg[0].samples_per_packet = 2048;
samples_per_frame = 153600;
openair0_cfg[card].tx_bw = 5e6;
openair0_cfg[card].rx_bw = 5e6;
tx_forward_nsamps = 95;
tx_delay = 5;
#endif
......@@ -2824,10 +2832,17 @@ int main( int argc, char **argv )
sample_rate = 7.68e6;
bw = 2.5e6;
#ifndef EXMIMO
openair0_cfg[0].samples_per_packet = 1024;
samples_per_frame = 76800;
openair0_cfg[card].tx_bw = 2.5e6;
openair0_cfg[card].rx_bw = 2.5e6;
openair0_cfg[0].samples_per_packet = 1024;
#ifdef OAI_USRP
tx_forward_nsamps = 70;
tx_delay = 6;
#elif OAI_BLADERF
tx_forward_nsamps = 70;
tx_delay = 6;
#endif
#endif
} else if (frame_parms[0]->N_RB_DL == 6) {
sample_rate = 1.92e6;
......@@ -2835,6 +2850,8 @@ int main( int argc, char **argv )
#ifndef EXMIMO
openair0_cfg[0].samples_per_packet = 256;
samples_per_frame = 19200;
openair0_cfg[card].tx_bw = 1.5e6;
openair0_cfg[card].rx_bw = 1.5e6;
tx_forward_nsamps = 40;
tx_delay = 8;
#endif
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment