/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.0 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
#ifndef __PHY_TOOLS_DEFS__H__
#define __PHY_TOOLS_DEFS__H__
/** @addtogroup _PHY_DSP_TOOLS_
* @{
*/
#include <stdint.h>
#include "PHY/sse_intrin.h"
//defined in rtai_math.h
#ifndef _RTAI_MATH_H
struct complex {
double x;
double y;
};
#endif
struct complexf {
float r;
float i;
};
struct complex16 {
int16_t r;
int16_t i;
};
struct complex32 {
int32_t r;
int32_t i;
};
//cmult_sv.h
/*!\fn void multadd_real_vector_complex_scalar(int16_t *x,int16_t *alpha,int16_t *y,uint32_t N)
This function performs componentwise multiplication and accumulation of a complex scalar and a real vector.
@param x Vector input (Q1.15)
@param alpha Scalar input (Q1.15) in the format |Re0 Im0|
@param y Output (Q1.15) in the format |Re0 Im0 Re1 Im1|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)|
@param N Length of x WARNING: N>=8
The function implemented is : \f$\mathbf{y} = y + \alpha\mathbf{x}\f$
*/
void multadd_real_vector_complex_scalar(int16_t *x,
int16_t *alpha,
int16_t *y,
uint32_t N
);
/*!\fn void multadd_complex_vector_real_scalar(int16_t *x,int16_t alpha,int16_t *y,uint8_t zero_flag,uint32_t N)
This function performs componentwise multiplication and accumulation of a real scalar and a complex vector.
@param x Vector input (Q1.15) in the format |Re0 Im0|Re1 Im 1| ...
@param alpha Scalar input (Q1.15) in the format |Re0|
@param y Output (Q1.15) in the format |Re0 Im0 Re1 Im1|,......,|Re(N-1) Im(N-1) Re(N-1) Im(N-1)|
@param zero_flag Set output (y) to zero prior to accumulation
@param N Length of x WARNING: N>=8
The function implemented is : \f$\mathbf{y} = y + \alpha\mathbf{x}\f$
*/
void multadd_complex_vector_real_scalar(int16_t *x,
int16_t alpha,
int16_t *y,
uint8_t zero_flag,
uint32_t N);
int rotate_cpx_vector(int16_t *x,
int16_t *alpha,
int16_t *y,
uint32_t N,
uint16_t output_shift);
/*!\fn void init_fft(uint16_t size,uint8_t logsize,uint16_t *rev)
\brief Initialize the FFT engine for a given size
@param size Size of the FFT
@param logsize log2(size)
@param rev Pointer to bit-reversal permutation array
*/
//cmult_vv.c
/*!
Multiply elementwise the complex conjugate of x1 with x2.
@param x1 - input 1 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
We assume x1 with a dinamic of 15 bit maximum
@param x2 - input 2 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
We assume x2 with a dinamic of 14 bit maximum
@param y - output in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
@param N - the size f the vectors (this function does N cpx mpy. WARNING: N>=4;
@param output_shift - shift to be applied to generate output
@param madd - if not zero result is added to output
*/
int mult_cpx_conj_vector(int16_t *x1,
int16_t *x2,
int16_t *y,
uint32_t N,
int output_shift,
int madd);
/*!
Element-wise multiplication and accumulation of two complex vectors x1 and x2.
@param x1 - input 1 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
We assume x1 with a dinamic of 15 bit maximum
@param x2 - input 2 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
We assume x2 with a dinamic of 14 bit maximum
@param y - output in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
@param zero_flag Set output (y) to zero prior to accumulation
@param N - the size f the vectors (this function does N cpx mpy. WARNING: N>=4;
@param output_shift - shift to be applied to generate output
*/
int multadd_cpx_vector(int16_t *x1,
int16_t *x2,
int16_t *y,
uint8_t zero_flag,
uint32_t N,
int output_shift);
int mult_cpx_vector(int16_t *x1,
int16_t *x2,
int16_t *y,
uint32_t N,
int output_shift);
// lte_dfts.c
void init_fft(uint16_t size,
uint8_t logsize,
uint16_t *rev);
/*!\fn void fft(int16_t *x,int16_t *y,int16_t *twiddle,uint16_t *rev,uint8_t log2size,uint8_t scale,uint8_t input_fmt)
This function performs optimized fixed-point radix-2 FFT/IFFT.
@param x Input
@param y Output in format: [Re0,Im0,Re0,Im0, Re1,Im1,Re1,Im1, ....., Re(N-1),Im(N-1),Re(N-1),Im(N-1)]
@param twiddle Twiddle factors
@param rev bit-reversed permutation
@param log2size Base-2 logarithm of FFT size
@param scale Total number of shifts (should be log2size/2 for normalized FFT)
@param input_fmt (0 - input is in complex Q1.15 format, 1 - input is in complex redundant Q1.15 format)
*/
/*void fft(int16_t *x,
int16_t *y,
int16_t *twiddle,
uint16_t *rev,
uint8_t log2size,
uint8_t scale,
uint8_t input_fmt
);
*/
void idft1536(int16_t *sigF,int16_t *sig,int scale);
void idft6144(int16_t *sigF,int16_t *sig);
void idft12288(int16_t *sigF,int16_t *sig);
void idft18432(int16_t *sigF,int16_t *sig);
void idft3072(int16_t *sigF,int16_t *sig);
void idft24576(int16_t *sigF,int16_t *sig);
void dft1536(int16_t *sigF,int16_t *sig,int scale);
void dft6144(int16_t *sigF,int16_t *sig);
void dft12288(int16_t *sigF,int16_t *sig);
void dft18432(int16_t *sigF,int16_t *sig);
void dft3072(int16_t *sigF,int16_t *sig);
void dft24576(int16_t *sigF,int16_t *sig);
/*!\fn int32_t rotate_cpx_vector(int16_t *x,int16_t *alpha,int16_t *y,uint32_t N,uint16_t output_shift)
This function performs componentwise multiplication of a vector with a complex scalar.
@param x Vector input (Q1.15) in the format |Re0 Im0|,......,|Re(N-1) Im(N-1)|
@param alpha Scalar input (Q1.15) in the format |Re0 Im0|
@param y Output (Q1.15) in the format |Re0 Im0|,......,|Re(N-1) Im(N-1)|
@param N Length of x WARNING: N>=4
@param output_shift Number of bits to shift output down to Q1.15 (should be 15 for Q1.15 inputs) WARNING: log2_amp>0 can cause overflow!!
The function implemented is : \f$\mathbf{y} = \alpha\mathbf{x}\f$
*/
int32_t rotate_cpx_vector(int16_t *x,
int16_t *alpha,
int16_t *y,
uint32_t N,
uint16_t output_shift);
//cadd_sv.c
/*!\fn int32_t add_cpx_vector(int16_t *x,int16_t *alpha,int16_t *y,uint32_t N)
This function performs componentwise addition of a vector with a complex scalar.
@param x Vector input (Q1.15) in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
@param alpha Scalar input (Q1.15) in the format |Re0 Im0|
@param y Output (Q1.15) in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
@param N Length of x WARNING: N>=4
The function implemented is : \f$\mathbf{y} = \alpha + \mathbf{x}\f$
*/
int32_t add_cpx_vector(int16_t *x,
int16_t *alpha,
int16_t *y,
uint32_t N);
int32_t sub_cpx_vector16(int16_t *x,
int16_t *y,
int16_t *z,
uint32_t N);
int32_t add_cpx_vector32(int16_t *x,
int16_t *y,
int16_t *z,
uint32_t N);
int32_t add_real_vector64(int16_t *x,
int16_t *y,
int16_t *z,
uint32_t N);
int32_t sub_real_vector64(int16_t *x,
int16_t* y,
int16_t *z,
uint32_t N);
int32_t add_real_vector64_scalar(int16_t *x,
long long int a,
int16_t *y,
uint32_t N);
/*!\fn int32_t add_vector16(int16_t *x,int16_t *y,int16_t *z,uint32_t N)
This function performs componentwise addition of two vectors with Q1.15 components.
@param x Vector input (Q1.15)
@param y Scalar input (Q1.15)
@param z Scalar output (Q1.15)
@param N Length of x WARNING: N must be a multiple of 32
The function implemented is : \f$\mathbf{z} = \mathbf{x} + \mathbf{y}\f$
*/
int32_t add_vector16(int16_t *x,
int16_t *y,
int16_t *z,
uint32_t N);
int32_t add_vector16_64(int16_t *x,
int16_t *y,
int16_t *z,
uint32_t N);
int32_t complex_conjugate(int16_t *x1,
int16_t *y,
uint32_t N);
void bit8_txmux(int32_t length,int32_t offset);
void bit8_rxdemux(int32_t length,int32_t offset);
#ifdef USER_MODE
/*!\fn int32_t write_output(const char *fname, const char *vname, void *data, int length, int dec, char format);
\brief Write output file from signal data
@param fname output file name
@param vname output vector name (for MATLAB/OCTAVE)
@param data point to data
@param length length of data vector to output
@param dec decimation level
@param format data format (0 = real 16-bit, 1 = complex 16-bit,2 real 32-bit, 3 complex 32-bit,4 = real 8-bit, 5 = complex 8-bit)
*/
int32_t write_output(const char *fname, const char *vname, void *data, int length, int dec, char format);
#endif
void Zero_Buffer(void *,uint32_t);
void Zero_Buffer_nommx(void *buf,uint32_t length);
void mmxcopy(void *dest,void *src,int size);
/*!\fn int32_t signal_energy(int *,uint32_t);
\brief Computes the signal energy per subcarrier
*/
int32_t signal_energy(int32_t *,uint32_t);
#ifdef LOCALIZATION
/*!\fn int32_t signal_energy(int *,uint32_t);
\brief Computes the signal energy per subcarrier
*/
int32_t subcarrier_energy(int32_t *,uint32_t, int32_t* subcarrier_energy, uint16_t rx_power_correction);
#endif
/*!\fn int32_t signal_energy_nodc(int32_t *,uint32_t);
\brief Computes the signal energy per subcarrier, without DC removal
*/
int32_t signal_energy_nodc(int32_t *,uint32_t);
/*!\fn double signal_energy_fp(double *s_re[2], double *s_im[2],uint32_t, uint32_t,uint32_t);
\brief Computes the signal energy per subcarrier
*/
double signal_energy_fp(double *s_re[2], double *s_im[2], uint32_t nb_antennas, uint32_t length,uint32_t offset);
/*!\fn double signal_energy_fp2(struct complex *, uint32_t);
\brief Computes the signal energy per subcarrier
*/
double signal_energy_fp2(struct complex *s, uint32_t length);
int32_t iSqrt(int32_t value);
uint8_t log2_approx(uint32_t);
uint8_t log2_approx64(unsigned long long int x);
int16_t invSqrt(int16_t x);
uint32_t angle(struct complex16 perrror);
/*!\fn int32_t phy_phase_compensation_top (uint32_t pilot_type, uint32_t initial_pilot,
uint32_t last_pilot, int32_t ignore_prefix);
Compensate the phase rotation of the RF. WARNING: This function is currently unused. It has not been tested!
@param pilot_type indicates whether it is a CHBCH (=0) or a SCH (=1) pilot
@param initial_pilot index of the first pilot (which serves as reference)
@param last_pilot index of the last pilot in the range of pilots to correct the phase
@param ignore_prefix set to 1 if cyclic prefix has not been removed (by the hardware)
*/
int8_t dB_fixed(uint32_t x);
int8_t dB_fixed2(uint32_t x,uint32_t y);
int16_t dB_fixed_times10(uint32_t x);
int32_t phy_phase_compensation_top (uint32_t pilot_type, uint32_t initial_pilot,
uint32_t last_pilot, int32_t ignore_prefix);
/*!\fn void phy_phase_compensation (int16_t *ref_sch, int16_t *tgt_sch, int16_t *out_sym, int32_t ignore_prefix, int32_t aa, struct complex16 *perror_out);
This function is used by the EMOS to compensate the phase rotation of the RF. It has been designed for symbols of type CHSCH or SCH, but cannot be used for the data channels.
@param ref_sch reference symbol
@param tgt_sch target symbol
@param out_sym output of the operation
@param ignore_prefix set to 1 if cyclic prefix has not been removed (by the hardware)
@param aa antenna index
@param perror_out phase error (output parameter)
*/
void phy_phase_compensation (int16_t *ref_sch, int16_t *tgt_sch, int16_t *out_sym, int32_t ignore_prefix, int32_t aa, struct complex16 *perror_out );
int32_t dot_product(int16_t *x,
int16_t *y,
uint32_t N, //must be a multiple of 8
uint8_t output_shift);
void dft12(int16_t *x,int16_t *y);
void dft24(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft36(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft48(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft60(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft72(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft96(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft108(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft120(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft144(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft180(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft192(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft216(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft240(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft288(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft300(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft324(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft360(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft384(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft432(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft480(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft540(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft576(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft600(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft648(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft720(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft864(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft900(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft960(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft972(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft1080(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft1152(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft1200(int16_t *x,int16_t *y,uint8_t scale_flag);
void dft64(int16_t *x,int16_t *y,int scale);
void dft128(int16_t *x,int16_t *y,int scale);
void dft256(int16_t *x,int16_t *y,int scale);
void dft512(int16_t *x,int16_t *y,int scale);
void dft1024(int16_t *x,int16_t *y,int scale);
void dft2048(int16_t *x,int16_t *y,int scale);
void dft4096(int16_t *x,int16_t *y,int scale);
void dft8192(int16_t *x,int16_t *y,int scale);
void idft64(int16_t *x,int16_t *y,int scale);
void idft128(int16_t *x,int16_t *y,int scale);
void idft256(int16_t *x,int16_t *y,int scale);
void idft512(int16_t *x,int16_t *y,int scale);
void idft1024(int16_t *x,int16_t *y,int scale);
void idft2048(int16_t *x,int16_t *y,int scale);
void idft4096(int16_t *x,int16_t *y,int scale);
void idft8192(int16_t *x,int16_t *y,int scale);
/** @} */
double interp(double x, double *xs, double *ys, int count);
#endif //__PHY_TOOLS_DEFS__H__