Active_gNBs = ( "gNB-Eurecom-5GNRBox"); # Asn1_verbosity, choice in: none, info, annoying Asn1_verbosity = "none"; gNBs = ( { ////////// Identification parameters: gNB_ID = 0xe00; cell_type = "CELL_MACRO_GNB"; gNB_name = "gNB-Eurecom-5GNRBox"; // Tracking area code, 0x0000 and 0xfffe are reserved values tracking_area_code = 1; plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;}); tr_s_preference = "local_mac" ////////// Physical parameters: ssb_SubcarrierOffset = 31; //0; pdsch_AntennaPorts = 1; pusch_AntennaPorts = 1; servingCellConfigCommon = ( { #spCellConfigCommon physCellId = 0; # downlinkConfigCommon #frequencyInfoDL # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP) absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell dl_frequencyBand = 78; # this is 3600 MHz dl_absoluteFrequencyPointA = 640000; #scs-SpecificCarrierList dl_offstToCarrier = 0; # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 dl_subcarrierSpacing = 1; dl_carrierBandwidth = 106; #initialDownlinkBWP #genericParameters # this is RBstart=84,L=13 (275*(L-1))+RBstart initialDLBWPlocationAndBandwidth = 6368; # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 initialDLBWPsubcarrierSpacing = 1; #pdcch-ConfigCommon initialDLBWPcontrolResourceSetZero = 0; initialDLBWPsearchSpaceZero = 0; #pdsch-ConfigCommon #pdschTimeDomainAllocationList (up to 16 entries) initialDLBWPk0_0 = 0; #for DL slot initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13 initialDLBWPk0_1 = 0; #for mixed slot initialDLBWPmappingType_1 = 0; initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5 #uplinkConfigCommon #frequencyInfoUL ul_frequencyBand = 78; #scs-SpecificCarrierList ul_offstToCarrier = 0; # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 ul_subcarrierSpacing = 1; ul_carrierBandwidth = 106; pMax = 20; #initialUplinkBWP #genericParameters initialULBWPlocationAndBandwidth = 6368; # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 initialULBWPsubcarrierSpacing = 1; #rach-ConfigCommon #rach-ConfigGeneric prach_ConfigurationIndex = 98; #prach_msg1_FDM #0 = one, 1=two, 2=four, 3=eight prach_msg1_FDM = 0; prach_msg1_FrequencyStart = 0; zeroCorrelationZoneConfig = 13; preambleReceivedTargetPower = -100; #preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200) preambleTransMax = 6; #powerRampingStep # 0=dB0,1=dB2,2=dB4,3=dB6 powerRampingStep = 1; #ra_ReponseWindow #1,2,4,8,10,20,40,80 ra_ResponseWindow = 5; #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4; #oneHalf (0..15) 4,8,12,16,...60,64 ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; //15; #ra_ContentionResolutionTimer #(0..7) 8,16,24,32,40,48,56,64 ra_ContentionResolutionTimer = 7; rsrp_ThresholdSSB = 19; #prach-RootSequenceIndex_PR #1 = 839, 2 = 139 prach_RootSequenceIndex_PR = 2; prach_RootSequenceIndex = 1; # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex # msg1_SubcarrierSpacing = 1, # restrictedSetConfig # 0=unrestricted, 1=restricted type A, 2=restricted type B restrictedSetConfig = 0, # pusch-ConfigCommon (up to 16 elements) initialULBWPk2_0 = 2; # used for UL slot initialULBWPmappingType_0 = 1 initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13 initialULBWPk2_1 = 2; # used for mixed slot initialULBWPmappingType_1 = 1; initialULBWPstartSymbolAndLength_1 = 24; # this is SS=10 L=2 initialULBWPk2_2 = 7; # used for Msg.3 during RA initialULBWPmappingType_2 = 1; initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4 msg3_DeltaPreamble = 1; p0_NominalWithGrant =-90; # pucch-ConfigCommon setup : # pucchGroupHopping # 0 = neither, 1= group hopping, 2=sequence hopping pucchGroupHopping = 0; hoppingId = 40; p0_nominal = -90; # ssb_PositionsInBurs_BitmapPR # 1=short, 2=medium, 3=long ssb_PositionsInBurst_PR = 2; ssb_PositionsInBurst_Bitmap = 1; #0x80; # ssb_periodicityServingCell # 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 ssb_periodicityServingCell = 2; # dmrs_TypeA_position # 0 = pos2, 1 = pos3 dmrs_TypeA_Position = 0; # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 subcarrierSpacing = 1; #tdd-UL-DL-ConfigurationCommon # subcarrierSpacing # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 referenceSubcarrierSpacing = 1; # pattern1 # dl_UL_TransmissionPeriodicity # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10 dl_UL_TransmissionPeriodicity = 6; nrofDownlinkSlots = 7; //8; //7; nrofDownlinkSymbols = 6; //0; //6; nrofUplinkSlots = 2; nrofUplinkSymbols = 4; //0; //4; ssPBCH_BlockPower = -25; } ); # ------- SCTP definitions SCTP : { # Number of streams to use in input/output SCTP_INSTREAMS = 2; SCTP_OUTSTREAMS = 2; }; ////////// MME parameters: amf_ip_address = ( { ipv4 = "192.168.69.131"; ipv6 = "192:168:30::17"; active = "yes"; preference = "ipv4"; } ); ///X2 enable_x2 = "yes"; t_reloc_prep = 1000; /* unit: millisecond */ tx2_reloc_overall = 2000; /* unit: millisecond */ t_dc_prep = 1000; /* unit: millisecond */ t_dc_overall = 2000; /* unit: millisecond */ target_enb_x2_ip_address = ( { ipv4 = "192.168.18.199"; ipv6 = "192:168:30::17"; preference = "ipv4"; } ); NETWORK_INTERFACES : { GNB_INTERFACE_NAME_FOR_NG_AMF = "eth0"; GNB_IPV4_ADDRESS_FOR_NG_AMF = "192.168.18.198/24"; GNB_INTERFACE_NAME_FOR_NGU = "eth0"; GNB_IPV4_ADDRESS_FOR_NGU = "192.168.18.198/24"; GNB_PORT_FOR_S1U = 2152; # Spec 2152 GNB_IPV4_ADDRESS_FOR_X2C = "192.168.18.198/24"; GNB_PORT_FOR_X2C = 36422; # Spec 36422 }; } ); MACRLCs = ( { num_cc = 1; tr_s_preference = "local_L1"; tr_n_preference = "local_RRC"; pusch_TargetSNRx10 = 200; pucch_TargetSNRx10 = 200; } ); L1s = ( { num_cc = 1; tr_n_preference = "local_mac"; pusch_proc_threads = 8; ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0 } ); RUs = ( { local_rf = "yes" nb_tx = 1 nb_rx = 1 att_tx = 0 att_rx = 0; bands = [7]; max_pdschReferenceSignalPower = -27; max_rxgain = 114; eNB_instances = [0]; clock_src = "internal"; } ); THREAD_STRUCT = ( { #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT" parallel_config = "PARALLEL_RU_L1_TRX_SPLIT"; //parallel_config = "PARALLEL_SINGLE_THREAD"; #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE" worker_config = "WORKER_ENABLE"; } ); security = { # preferred ciphering algorithms # the first one of the list that an UE supports in chosen # valid values: nea0, nea1, nea2, nea3 ciphering_algorithms = ( "nea0" ); # preferred integrity algorithms # the first one of the list that an UE supports in chosen # valid values: nia0, nia1, nia2, nia3 integrity_algorithms = ( "nia2", "nia0" ); # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter # what 'ciphering_algorithms' configures; same thing for 'drb_integrity' drb_ciphering = "yes"; drb_integrity = "no"; }; log_config : { global_log_level ="info"; global_log_verbosity ="medium"; hw_log_level ="info"; hw_log_verbosity ="medium"; phy_log_level ="info"; phy_log_verbosity ="medium"; mac_log_level ="info"; mac_log_verbosity ="high"; rlc_log_level ="info"; rlc_log_verbosity ="medium"; pdcp_log_level ="info"; pdcp_log_verbosity ="medium"; rrc_log_level ="info"; rrc_log_verbosity ="medium"; };