Skip to content

O
OpenXG-RAN
Commit 34b26126 authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

Merge remote-tracking branch 'origin/rfsimulator-simulate-channel' into... 

Merge remote-tracking branch 'origin/rfsimulator-simulate-channel' into integration_develop-nr_2019w24
parents a40962cb 8467f2eb
Hide whitespace changes
Inline Side-by-side
Showing with 351 additions and 330 deletions
cmake_targets/CMakeLists.txt
View file @ 34b26126
......@@ -619,8 +619,6 @@ set(HWLIB_TCP_BRIDGE_OAI_SOURCE
add_library(tcp_bridge_oai MODULE ${HWLIB_TCP_BRIDGE_OAI_SOURCE} )
set_target_properties(tcp_bridge_oai PROPERTIES COMPILE_FLAGS "-fvisibility=hidden")
add_library(rfsimulator MODULE ${OPENAIR_TARGETS}/ARCH/rfsimulator/simulator.c)
##########################################################
include_directories ("${OPENAIR_TARGETS}/ARCH/COMMON")
......@@ -2135,6 +2133,12 @@ add_library(gnbScope MODULE
)
target_link_libraries(gnbScope forms)
add_library(rfsimulator MODULE
${OPENAIR_TARGETS}/ARCH/rfsimulator/simulator.c
)
target_link_libraries(rfsimulator SIMU ${ATLAS_LIBRARIES})
set(CMAKE_MODULE_PATH "${OPENAIR_DIR}/cmake_targets/tools/MODULES" "${CMAKE_MODULE_PATH}")
#include T directory even if the T is off because T macros are in the code
......
executables/nr-softmodem-common.h 0 → 100644
View file @ 34b26126
#ifndef NR_SOFTMODEM_COMMON_H
#define NR_SOFTMODEM_COMMON_H
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/sysinfo.h>
#include "targets/ARCH/COMMON/common_lib.h"
#undef MALLOC
#include "assertions.h"
#include "PHY/types.h"
#include <threadPool/thread-pool.h>
#if defined(ENABLE_USE_MME)
#include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#endif
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
#define CONFIG_HLP_UEFO "set UE to enable estimation and compensation of frequency offset\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_USRP_CLK_SRC "USRP clock source: 'internal' or 'external'\n"
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
#define CONFIG_HLP_SNR "Set average SNR in dB (for --siml1 option)\n"
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
/***************************************************************************************************************************************/
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint8_t exit_missed_slots;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
#if defined(ENABLE_ITTI)
extern volatile int start_eNB;
extern volatile int start_UE;
#endif
#endif
executables/nr-softmodem.c
View file @ 34b26126
......@@ -139,6 +139,7 @@ unsigned char NB_gNB_INST = 1;
int UE_scan = 1;
int UE_scan_carrier = 0;
runmode_t mode = normal_txrx;
double snr_dB=20;
FILE *input_fd=NULL;
......
executables/nr-softmodem.h
View file @ 34b26126
#ifndef NR_SOFTMODEM_H
#define NR_SOFTMODEM_H
#define _GNU_SOURCE
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/sysinfo.h>
#include "targets/ARCH/COMMON/common_lib.h"
#undef MALLOC
#include "assertions.h"
#include "msc.h"
#include "PHY/types.h"
#include <executables/nr-softmodem-common.h>
#include "flexran_agent.h"
#include "PHY/defs_gNB.h"
#if defined(ENABLE_ITTI)
#if defined(ENABLE_USE_MME)
#include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#endif
#endif
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
/***************************************************************************************************************************************/
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
......@@ -98,25 +16,6 @@
/* command line parameters defining UE running mode */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_UEMODEPARAMS_DESC { \
{"calib-ue-rx", CONFIG_HLP_CALUER, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"calib-ue-rx-med", CONFIG_HLP_CALUERM, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"calib-ue-rx-byp", CONFIG_HLP_CALUERB, 0, iptr:&rx_input_level_dBm, defintval:0, TYPE_INT, 0}, \
{"debug-ue-prach", CONFIG_HLP_DBGUEPR, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"no-L2-connect", CONFIG_HLP_NOL2CN, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"calib-prach-tx", CONFIG_HLP_CALPRACH, PARAMFLAG_BOOL, uptr:NULL, defuintval:1, TYPE_INT, 0}, \
{"loop-memory", CONFIG_HLP_UELOOP, 0, strptr:&loopfile, defstrval:"iqs.in", TYPE_STRING,0}, \
{"ue-dump-frame", CONFIG_HLP_DUMPFRAME, PARAMFLAG_BOOL, iptr:&dumpframe, defintval:0, TYPE_INT, 0}, \
}
#define CMDLINE_CALIBUERX_IDX 0
#define CMDLINE_CALIBUERXMED_IDX 1
#define CMDLINE_CALIBUERXBYP_IDX 2
#define CMDLINE_DEBUGUEPRACH_IDX 3
#define CMDLINE_NOL2CONNECT_IDX 4
#define CMDLINE_CALIBPRACHTX_IDX 5
#define CMDLINE_MEMLOOP_IDX 6
#define CMDLINE_DUMPMEMORY_IDX 7
/*------------------------------------------------------------------------------------------------------------------------------------------*/
#define DEFAULT_DLF 2680000000
......@@ -150,27 +49,10 @@
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, iptr:&emulate_rf, defintval:0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD,0, strptr:(char **)&parallel_config, defstrval:NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"s" , CONFIG_HLP_SNR, 0, dblptr:&snr_dB, defdblval:25, TYPE_DOUBLE, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT,PARAMFLAG_BOOL, iptr:&nonbiotflag, defintval:0, TYPE_INT, 0} \
}
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
typedef struct {
......@@ -183,33 +65,6 @@ extern int T_nowait;
extern int T_dont_fork;
/***************************************************************************************************************************************/
/* */
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint8_t exit_missed_slots;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
#if defined(ENABLE_ITTI)
extern volatile int start_gNB;
#endif
#include "threads_t.h"
extern threads_t threads;
......
executables/nr-uesoftmodem.c
View file @ 34b26126
......@@ -114,6 +114,7 @@ volatile int oai_exit = 0;
static clock_source_t clock_source = internal;
int single_thread_flag=1;
double snr_dB=20;
int threequarter_fs=0;
......
executables/nr-uesoftmodem.h
View file @ 34b26126
#ifndef NR_UESOFTMODEM_H
#define NR_UESOFTMODEM_H
#define _GNU_SOURCE
#include <execinfo.h>
#include <fcntl.h>
#include <getopt.h>
#include <linux/sched.h>
#include <sched.h>
#include <signal.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syscall.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/sysinfo.h>
#include <sys/types.h>
#include <unistd.h>
#include <sys/sysinfo.h>
#include "../../ARCH/COMMON/common_lib.h"
#undef MALLOC
#include "assertions.h"
#include "PHY/types.h"
#include <executables/nr-softmodem-common.h>
#include "PHY/defs_nr_UE.h"
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#include <threadPool/thread-pool.h>
#include <openair2/LAYER2/NR_MAC_gNB/mac_proto.h>
#if defined(ENABLE_ITTI)
#if defined(ENABLE_USE_MME)
#include "s1ap_eNB.h"
#ifdef PDCP_USE_NETLINK
#include "SIMULATION/ETH_TRANSPORT/proto.h"
#endif
#endif
#endif
/* help strings definition for command line options, used in CMDLINE_XXX_DESC macros and printed when -h option is used */
#define CONFIG_HLP_RFCFGF "Configuration file for front-end (e.g. LMS7002M)\n"
#define CONFIG_HLP_ULMAXE "set the eNodeB max ULSCH erros\n"
#define CONFIG_HLP_CALUER "set UE RX calibration\n"
#define CONFIG_HLP_CALUERM ""
#define CONFIG_HLP_CALUERB ""
#define CONFIG_HLP_DBGUEPR "UE run normal prach power ramping, but don't continue random-access\n"
#define CONFIG_HLP_CALPRACH "UE run normal prach with maximum power, but don't continue random-access\n"
#define CONFIG_HLP_NOL2CN "bypass L2 and upper layers\n"
#define CONFIG_HLP_UERXG "set UE RX gain\n"
#define CONFIG_HLP_UERXGOFF "external UE amplifier offset\n"
#define CONFIG_HLP_UETXG "set UE TX gain\n"
#define CONFIG_HLP_UENANTR "set UE number of rx antennas\n"
#define CONFIG_HLP_UENANTT "set UE number of tx antennas\n"
#define CONFIG_HLP_UESCAN "set UE to scan around carrier\n"
#define CONFIG_HLP_UEFO "set UE to enable estimation and compensation of frequency offset\n"
#define CONFIG_HLP_DUMPFRAME "dump UE received frame to rxsig_frame0.dat and exit\n"
#define CONFIG_HLP_DLSHIFT "dynamic shift for LLR compuation for TM3/4 (default 0)\n"
#define CONFIG_HLP_UELOOP "get softmodem (UE) to loop through memory instead of acquiring from HW\n"
#define CONFIG_HLP_PHYTST "test UE phy layer, mac disabled\n"
#define CONFIG_HLP_DMAMAP "sets flag for improved EXMIMO UE performance\n"
#define CONFIG_HLP_EXCCLK "tells hardware to use an external clock reference\n"
#define CONFIG_HLP_USIM "use XOR autentication algo in case of test usim mode\n"
#define CONFIG_HLP_NOSNGLT "Disables single-thread mode in lte-softmodem\n"
#define CONFIG_HLP_TADV "Set timing_advance\n"
#define CONFIG_HLP_DLF "Set the downlink frequency for all component carriers\n"
#define CONFIG_HLP_CHOFF "Channel id offset\n"
#define CONFIG_HLP_SOFTS "Enable soft scope and L1 and L2 stats (Xforms)\n"
#define CONFIG_HLP_EXMCAL "Calibrate the EXMIMO borad, available files: exmimo2_2arxg.lime exmimo2_2brxg.lime \n"
#define CONFIG_HLP_ITTIL "Generate ITTI analyzser logs (similar to wireshark logs but with more details)\n"
#define CONFIG_HLP_DLMCS "Set the maximum downlink MCS\n"
#define CONFIG_HLP_STMON "Enable processing timing measurement of lte softmodem on per subframe basis \n"
#define CONFIG_HLP_PRB "Set the PRB, valid values: 6, 25, 50, 100 \n"
#define CONFIG_HLP_MSLOTS "Skip the missed slots/subframes \n"
#define CONFIG_HLP_ULMCS "Set the maximum uplink MCS\n"
#define CONFIG_HLP_TDD "Set hardware to TDD mode (default: FDD). Used only with -U (otherwise set in config file).\n"
#define CONFIG_HLP_UE "Set the lte softmodem as a UE\n"
#define CONFIG_HLP_L2MONW "Enable L2 wireshark messages on localhost \n"
#define CONFIG_HLP_L2MONP "Enable L2 pcap messages on localhost \n"
#define CONFIG_HLP_VCD "Enable VCD (generated file will is named openair_dump_eNB.vcd, read it with target/RT/USER/eNB.gtkw\n"
#define CONFIG_HLP_TQFS "Apply three-quarter of sampling frequency, 23.04 Msps to reduce the data rate on USB/PCIe transfers (only valid for 20 MHz)\n"
#define CONFIG_HLP_TPORT "tracer port\n"
#define CONFIG_HLP_NOTWAIT "don't wait for tracer, start immediately\n"
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_USRP_ARGS "set the arguments to identify USRP (same syntax as in UHD)\n"
#define CONFIG_HLP_USRP_CLK_SRC "USRP clock source: 'internal' or 'external'\n"
/***************************************************************************************************************************************/
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
when calling config_get or config_getlist functions */
......@@ -174,27 +84,10 @@
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, iptr:&emulate_rf, defintval:0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD,0, strptr:(char **)&parallel_config, defstrval:NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"s" , CONFIG_HLP_SNR, 0, dblptr:&snr_dB, defdblval:25, TYPE_DOUBLE, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT, PARAMFLAG_BOOL, iptr:&nonbiotflag, defintval:0, TYPE_INT, 0} \
}
}
#define CONFIG_HLP_FLOG "Enable online log \n"
#define CONFIG_HLP_LOGL "Set the global log level, valide options: (9:trace, 8/7:debug, 6:info, 4:warn, 3:error)\n"
#define CONFIG_HLP_LOGV "Set the global log verbosity \n"
#define CONFIG_HLP_TELN "Start embedded telnet server \n"
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* command line parameters for LOG utility */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*---------------------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define CMDLINE_LOGPARAMS_DESC { \
{"R" , CONFIG_HLP_FLOG, 0, uptr:&online_log_messages, defintval:1, TYPE_INT, 0}, \
{"g" , CONFIG_HLP_LOGL, 0, uptr:&glog_level, defintval:0, TYPE_UINT, 0}, \
{"G" , CONFIG_HLP_LOGV, 0, uptr:&glog_verbosity, defintval:0, TYPE_UINT16, 0}, \
{"telnetsrv", CONFIG_HLP_TELN, PARAMFLAG_BOOL, uptr:&start_telnetsrv, defintval:0, TYPE_UINT, 0}, \
}
#define CMDLINE_ONLINELOG_IDX 0
#define CMDLINE_GLOGLEVEL_IDX 1
#define CMDLINE_GLOGVERBO_IDX 2
#define CMDLINE_STARTTELN_IDX 3
extern int T_port;
......@@ -203,35 +96,6 @@ extern int T_dont_fork;
/***************************************************************************************************************************************/
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern uint32_t downlink_frequency[MAX_NUM_CCs][4];
extern int32_t uplink_frequency_offset[MAX_NUM_CCs][4];
extern int rx_input_level_dBm;
extern uint8_t exit_missed_slots;
extern uint64_t num_missed_slots; // counter for the number of missed slots
extern int oaisim_flag;
extern volatile int oai_exit;
extern openair0_config_t openair0_cfg[MAX_CARDS];
extern pthread_cond_t sync_cond;
extern pthread_mutex_t sync_mutex;
extern int sync_var;
extern int transmission_mode;
extern double cpuf;
#if defined(ENABLE_ITTI)
extern volatile int start_eNB;
extern volatile int start_UE;
#endif
// In nr-ue.c
extern int setup_ue_buffers(PHY_VARS_NR_UE **phy_vars_ue, openair0_config_t *openair0_cfg);
extern void fill_ue_band_info(void);
......
targets/ARCH/COMMON/common_lib.h
View file @ 34b26126
......@@ -405,7 +405,7 @@ typedef int(*oai_transport_initfunc_t)(openair0_device *device, openair0_config_
#define OPTION_LZ4 0x00000001 // LZ4 compression (option_value is set to compressed size)
#define sample_t uint32_t // 2*16 bits complex number
#define sample_t struct complex16 // 2*16 bits complex number
typedef struct {
uint64_t magic; // Magic value (see defines above)
......
targets/ARCH/rfsimulator/README.md
View file @ 34b26126
......@@ -30,7 +30,7 @@ Then, you can use it freely
# Usage
Setting the env variable RFSIMULATOR enables the RF board simulator
It should the set to "enb" in the eNB
It should the set to "server" in the eNB or gNB
## 4G case
For the UE, it should be set to the IP address of the eNB
......@@ -62,6 +62,19 @@ sudo RFSIMULATOR=127.0.0.1 ./nr-uesoftmodem --numerology 1 -r 106 -C 3510000000
Of course, set the gNB machine IP address if the UE and the gNB are not on the same machine
In UE, you can add "-d" to get the softscope
### Channel simulation
The RF channel simulator is called.
In current version all channel paramters are hard coded in the call to:
new_channel_desc_scm(bridge->tx_num_channels,bridge->rx_num_channels,
AWGN,
bridge->sample_rate,
bridge->tx_bw,
0.0, // forgetting_factor
0, // maybe used for TA
0); // path_loss in dB
Only the input noise can be changed on command line with -s parameter.
With path loss = 0 set "-s 5" to see a little noise
#Caveacts
Still issues in power control: txgain, rxgain are not used
......
targets/ARCH/rfsimulator/simulator.c
View file @ 34b26126
......@@ -3,7 +3,7 @@
copyleft: OpenAirInterface Software Alliance and it's licence
*/
/*
/*
* Open issues and limitations
* The read and write should be called in the same thread, that is not new USRP UHD design
* When the opposite side switch from passive reading to active R+Write, the synchro is not fully deterministic
......@@ -27,14 +27,23 @@
#include "common_lib.h"
#include <openair1/PHY/defs_eNB.h>
#include "openair1/PHY/defs_UE.h"
#include <openair1/SIMULATION/TOOLS/sim.h>
#define PORT 4043 //TCP port for this simulator
#define CirSize 3072000 // 100ms is enough
#define sample_t uint32_t // 2*16 bits complex number
#define sampleToByte(a,b) ((a)*(b)*sizeof(sample_t))
#define byteToSample(a,b) ((a)/(sizeof(sample_t)*(b)))
#define sample_t uint32_t //2*16 bits complex number
#define MAX_SIMULATION_CONNECTED_NODES 5
#define GENERATE_CHANNEL 10 //each frame in DL
// Fixme: datamodel, external variables in .h files, ...
#include <common/ran_context.h>
extern double snr_dB;
extern RAN_CONTEXT_t RC;
//
pthread_mutex_t Sockmutex;
typedef struct buffer_s {
int conn_sock;
......@@ -46,6 +55,7 @@ typedef struct buffer_s {
uint64_t remainToTransfer;
char *circularBufEnd;
sample_t *circularBuf;
channel_desc_t *channel_model;
} buffer_t;
typedef struct {
......@@ -55,8 +65,92 @@ typedef struct {
char *ip;
int saveIQfile;
buffer_t buf[FD_SETSIZE];
int rx_num_channels;
int tx_num_channels;
double sample_rate;
double tx_bw;
} rfsimulator_state_t;
/*
Legacy study:
The parameters are:
gain&loss (decay, signal power, ...)
either a fixed gain in dB, a target power in dBm or ACG (automatic control gain) to a target average
=> don't redo the AGC, as it was used in UE case, that must have a AGC inside the UE
will be better to handle the "set_gain()" called by UE to apply it's gain (enable test of UE power loop)
lin_amp = pow(10.0,.05*txpwr_dBm)/sqrt(nb_tx_antennas);
a lot of operations in legacy, grouped in one simulation signal decay: txgain*decay*rxgain
multi_path (auto convolution, ISI, ...)
either we regenerate the channel (call again random_channel(desc,0)), or we keep it over subframes
legacy: we regenerate each sub frame in UL, and each frame only in DL
*/
void rxAddInput( struct complex16 *input_sig, struct complex16 *after_channel_sig,
int rxAnt,
channel_desc_t *channelDesc,
int nbSamples,
uint64_t TS
) {
// channelDesc->path_loss_dB should contain the total path gain
// so, in actual RF: tx gain + path loss + rx gain (+antenna gain, ...)
// UE and NB gain control to be added
// Fixme: not sure when it is "volts" so dB is 20*log10(...) or "power", so dB is 10*log10(...)
const double pathLossLinear = pow(10,channelDesc->path_loss_dB/20.0);
// Energy in one sample to calibrate input noise
//Fixme: modified the N0W computation, not understand the origin value
const double KT=1.38e-23*290; //Boltzman*temperature
// sampling rate is linked to acquisition band (the input pass band filter)
const double noise_figure_watt = KT*channelDesc->sampling_rate;
// Fixme: how to convert a noise in Watt into a 12 bits value out of the RF ADC ?
// the parameter "-s" is declared as SNR, but the input power is not well defined
// −132.24 dBm is a LTE subcarrier noise, that was used in origin code (15KHz BW thermal noise)
const double rxGain= 132.24 - snr_dB;
const double noise_per_sample = sqrt(0.5*noise_figure_watt) * pow(10,rxGain/20);
// Fixme: we don't fill the offset length samples at begining ?
// anyway, in today code, channel_offset=0
const int dd = abs(channelDesc->channel_offset);
const int nbTx=channelDesc->nb_tx;
for (int i=0; i<((int)nbSamples-dd); i++) {
struct complex16 *out_ptr=after_channel_sig+dd+i;
struct complex rx_tmp= {0};
for (int txAnt=0; txAnt < nbTx; txAnt++) {
const struct complex *channelModel= channelDesc->ch[rxAnt+(txAnt*channelDesc->nb_rx)];
//const struct complex *channelModelEnd=channelModel+channelDesc->channel_length;
for (int l = 0; l<(int)channelDesc->channel_length; l++) {
// let's assume TS+i >= l
// fixme: the rfsimulator current structure is interleaved antennas
// this has been designed to not have to wait a full block transmission
// but it is not very usefull
// it would be better to split out each antenna in a separate flow
// that will allow to mix ru antennas freely
struct complex16 tx16=input_sig[((TS+i-l)*nbTx+txAnt)%CirSize];
rx_tmp.x += tx16.r * channelModel[l].x - tx16.i * channelModel[l].y;
rx_tmp.y += tx16.i * channelModel[l].x + tx16.r * channelModel[l].y;
} //l
}
out_ptr->r += round(rx_tmp.x*pathLossLinear + noise_per_sample*gaussdouble(0.0,1.0));
/*
printf("in: %d, out %d= %f*%f + %f*%f\n",
input_sig[((TS+i)*nbTx)%CirSize].r, out_ptr->r , rx_tmp.x,
pathLossLinear, noise_per_sample,gaussdouble(0.0,1.0));
*/
out_ptr->i += round(rx_tmp.y*pathLossLinear + noise_per_sample*gaussdouble(0.0,1.0));
out_ptr++;
}
if ( (TS*nbTx)%CirSize+nbSamples <= CirSize )
// Cast to a wrong type for compatibility !
LOG_D(HW,"Input power %f, output power: %f, channel path loss %f, noise coeff: %f \n",
10*log10((double)signal_energy((int32_t *)&input_sig[(TS*nbTx)%CirSize], nbSamples)),
10*log10((double)signal_energy((int32_t *)after_channel_sig, nbSamples)),
channelDesc->path_loss_dB,
10*log10(noise_per_sample));
}
void allocCirBuf(rfsimulator_state_t *bridge, int sock) {
buffer_t *ptr=&bridge->buf[sock];
AssertFatal ( (ptr->circularBuf=(sample_t *) malloc(sampleToByte(CirSize,1))) != NULL, "");
......@@ -73,12 +167,35 @@ void allocCirBuf(rfsimulator_state_t *bridge, int sock) {
ev.events = EPOLLIN | EPOLLRDHUP;
ev.data.fd = sock;
AssertFatal(epoll_ctl(bridge->epollfd, EPOLL_CTL_ADD, sock, &ev) != -1, "");
// create channel simulation model for this mode reception
// snr_dB is pure global, coming from configuration paramter "-s"
// Fixme: referenceSignalPower should come from the right place
// but the datamodel is inconsistant
// legacy: RC.ru[ru_id]->frame_parms.pdsch_config_common.referenceSignalPower
// (must not come from ru[]->frame_parms as it doesn't belong to ru !!!)
// Legacy sets it as:
// ptr->channel_model->path_loss_dB = -132.24 + snr_dB - RC.ru[0]->frame_parms->pdsch_config_common.referenceSignalPower;
// we use directly the paramter passed on the command line ("-s")
// the value channel_model->path_loss_dB seems only a storage place (new_channel_desc_scm() only copy the passed value)
// Legacy changes directlty the variable channel_model->path_loss_dB place to place
// while calling new_channel_desc_scm() with path losses = 0
ptr->channel_model=new_channel_desc_scm(bridge->tx_num_channels,bridge->rx_num_channels,
AWGN,
bridge->sample_rate,
bridge->tx_bw,
0.0, // forgetting_factor
0, // maybe used for TA
0); // path_loss in dB
random_channel(ptr->channel_model,false);
}
void removeCirBuf(rfsimulator_state_t *bridge, int sock) {
AssertFatal( epoll_ctl(bridge->epollfd, EPOLL_CTL_DEL, sock, NULL) != -1, "");
close(sock);
free(bridge->buf[sock].circularBuf);
// Fixme: no free_channel_desc_scm(bridge->buf[sock].channel_model) implemented
// a lot of mem leaks
free(bridge->buf[sock].channel_model);
memset(&bridge->buf[sock], 0, sizeof(buffer_t));
bridge->buf[sock].conn_sock=-1;
}
......@@ -126,8 +243,7 @@ void fullwrite(int fd, void *_buf, ssize_t count, rfsimulator_state_t *t) {
}
AssertFatal(fd>=0 && _buf && count >0 && t,
"Bug: %d/%p/%zd/%p", fd, _buf, count, t);
"Bug: %d/%p/%zd/%p", fd, _buf, count, t);
char *buf = _buf;
ssize_t l;
setblocking(fd, notBlocking);
......@@ -140,8 +256,8 @@ void fullwrite(int fd, void *_buf, ssize_t count, rfsimulator_state_t *t) {
continue;
if(errno==EAGAIN) {
// The opposite side is saturated
// we read incoming sockets meawhile waiting
// The opposite side is saturated
// we read incoming sockets meawhile waiting
flushInput(t, 5);
continue;
} else
......@@ -234,12 +350,15 @@ int rfsimulator_write(openair0_device *device, openair0_timestamp timestamp, voi
fullwrite(ptr->conn_sock, (void *)tmpSamples, sampleToByte(nsamps,nbAnt), t);
}
}
lastW=timestamp;
LOG_D(HW,"sent %d samples at time: %ld->%ld, energy in first antenna: %d\n",
nsamps, timestamp, timestamp+nsamps, signal_energy(samplesVoid[0], nsamps) );
// Let's verify we don't have incoming data
// This is mandatory when the opposite side don't transmit
// This is mandatory when the opposite side don't transmit
flushInput(t, 0);
pthread_mutex_unlock(&Sockmutex);
return nsamps;
}
......@@ -250,9 +369,9 @@ static bool flushInput(rfsimulator_state_t *t, int timeout) {
int nfds = epoll_wait(t->epollfd, events, FD_SETSIZE, timeout);
if ( nfds==-1 ) {
if ( errno==EINTR || errno==EAGAIN )
if ( errno==EINTR || errno==EAGAIN ) {
return false;
else
} else
AssertFatal(false,"error in epoll_wait\n");
}
......@@ -314,27 +433,31 @@ static bool flushInput(rfsimulator_state_t *t, int timeout) {
if ( b->lastReceivedTS != b->th.timestamp) {
int nbAnt= b->th.nbAnt;
for (uint64_t index=b->lastReceivedTS; index < b->th.timestamp; index++ )
for (int a=0; a < nbAnt; a++)
b->circularBuf[(index*nbAnt+a)%CirSize]=0;
for (uint64_t index=b->lastReceivedTS; index < b->th.timestamp; index++ ) {
for (int a=0; a < nbAnt; a++) {
b->circularBuf[(index*nbAnt+a)%CirSize].r=0;
b->circularBuf[(index*nbAnt+a)%CirSize].i=0;
}
}
LOG_W(HW,"gap of: %ld in reception\n", b->th.timestamp-b->lastReceivedTS );
}
b->lastReceivedTS=b->th.timestamp;
AssertFatal(lastW == -1 || ( abs((double)lastW-b->lastReceivedTS) < (double)CirSize),
"Tx/Rx shift too large Tx:%lu, Rx:%lu\n", lastW, b->lastReceivedTS);
AssertFatal(lastW == -1 || ( abs((double)lastW-b->lastReceivedTS) < (double)CirSize),
"Tx/Rx shift too large Tx:%lu, Rx:%lu\n", lastW, b->lastReceivedTS);
b->transferPtr=(char *)&b->circularBuf[b->lastReceivedTS%CirSize];
b->remainToTransfer=sampleToByte(b->th.size, b->th.nbAnt);
}
if ( b->headerMode==false ) {
LOG_D(HW,"Set b->lastReceivedTS %ld\n", b->lastReceivedTS);
LOG_D(HW,"Set b->lastReceivedTS %ld\n", b->lastReceivedTS);
b->lastReceivedTS=b->th.timestamp+b->th.size-byteToSample(b->remainToTransfer,b->th.nbAnt);
// First block in UE, resync with the eNB current TS
if ( t->nextTimestamp == 0 )
t->nextTimestamp=b->lastReceivedTS-b->th.size;
// First block in UE, resync with the eNB current TS
if ( t->nextTimestamp == 0 )
t->nextTimestamp=b->lastReceivedTS-b->th.size;
if ( b->remainToTransfer==0) {
LOG_D(HW,"Completed block reception: %ld\n", b->lastReceivedTS);
b->headerMode=true;
......@@ -351,10 +474,10 @@ static bool flushInput(rfsimulator_state_t *t, int timeout) {
int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, void **samplesVoid, int nsamps, int nbAnt) {
if (nbAnt != 1) {
LOG_E(HW, "rfsimulator: only 1 antenna tested\n");
exit(1);
LOG_W(HW, "rfsimulator: only 1 antenna tested\n");
}
pthread_mutex_lock(&Sockmutex);
rfsimulator_state_t *t = device->priv;
LOG_D(HW, "Enter rfsimulator_read, expect %d samples, will release at TS: %ld\n", nsamps, t->nextTimestamp+nsamps);
// deliver data from received data
......@@ -374,6 +497,7 @@ int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, vo
t->nextTimestamp+=nsamps;
LOG_W(HW,"Generated void samples for Rx: %ld\n", t->nextTimestamp);
*ptimestamp = t->nextTimestamp-nsamps;
pthread_mutex_unlock(&Sockmutex);
return nsamps;
}
} else {
......@@ -384,11 +508,11 @@ int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, vo
for ( int sock=0; sock<FD_SETSIZE; sock++) {
if ( t->buf[sock].circularBuf && t->buf[sock].alreadyRead )
if ( t->buf[sock].lastReceivedTS == 0 ||
(t->nextTimestamp+nsamps) > t->buf[sock].lastReceivedTS ) {
have_to_wait=true;
break;
}
if ( t->buf[sock].lastReceivedTS == 0 ||
(t->nextTimestamp+nsamps) > t->buf[sock].lastReceivedTS ) {
have_to_wait=true;
break;
}
}
if (have_to_wait)
......@@ -404,17 +528,25 @@ int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, vo
for (int a=0; a<nbAnt; a++)
memset(samplesVoid[a],0,sampleToByte(nsamps,1));
// Add all input signal in the output buffer
// Add all input nodes signal in the output buffer
for (int sock=0; sock<FD_SETSIZE; sock++) {
buffer_t *ptr=&t->buf[sock];
if ( ptr->circularBuf && ptr->alreadyRead ) {
for (int a=0; a<nbAnt; a++) {
sample_t *out=(sample_t *)samplesVoid[a];
for ( int i=0; i < nsamps; i++ )
out[i]+=ptr->circularBuf[((t->nextTimestamp+i)*nbAnt+a)%CirSize]<<1;
}
bool reGenerateChannel=false;
//fixme: when do we regenerate
// it seems legacy behavior is: never in UL, each frame in DL
if (reGenerateChannel)
random_channel(ptr->channel_model,0);
for (int a=0; a<nbAnt; a++)
rxAddInput( ptr->circularBuf, (struct complex16 *) samplesVoid[a],
a,
ptr->channel_model,
nsamps,
t->nextTimestamp
);
}
}
......@@ -424,10 +556,9 @@ int rfsimulator_read(openair0_device *device, openair0_timestamp *ptimestamp, vo
nsamps,
*ptimestamp, t->nextTimestamp,
signal_energy(samplesVoid[0], nsamps));
pthread_mutex_unlock(&Sockmutex);
return nsamps;
}
int rfsimulator_request(openair0_device *device, void *msg, ssize_t msg_len) {
abort();
return 0;
......@@ -452,12 +583,11 @@ int rfsimulator_set_freq(openair0_device *device, openair0_config_t *openair0_cf
int rfsimulator_set_gains(openair0_device *device, openair0_config_t *openair0_cfg) {
return 0;
}
__attribute__((__visibility__("default")))
int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
//set_log(HW,OAILOG_DEBUG);
//set_log(PHY,OAILOG_DEBUG);
// to change the log level, use this on command line
// --log_config.hw_log_level debug
// (for phy layer, replace "hw" by "phy"
rfsimulator_state_t *rfsimulator = (rfsimulator_state_t *)calloc(sizeof(rfsimulator_state_t),1);
if ((rfsimulator->ip=getenv("RFSIMULATOR")) == NULL ) {
......@@ -465,12 +595,14 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
exit(1);
}
pthread_mutex_init(&Sockmutex, NULL);
if ( strncasecmp(rfsimulator->ip,"enb",3) == 0 ||
strncasecmp(rfsimulator->ip,"server",3) == 0 )
rfsimulator->typeStamp = ENB_MAGICDL_FDD;
else
rfsimulator->typeStamp = UE_MAGICDL_FDD;
LOG_I(HW,"rfsimulator: running as %s\n", rfsimulator-> typeStamp == ENB_MAGICDL_FDD ? "(eg)NB" : "UE");
char *saveF;
......@@ -504,5 +636,12 @@ int device_init(openair0_device *device, openair0_config_t *openair0_cfg) {
rfsimulator->buf[i].conn_sock=-1;
AssertFatal((rfsimulator->epollfd = epoll_create1(0)) != -1,"");
// initialize channel simulation
rfsimulator->tx_num_channels=openair0_cfg->tx_num_channels;
rfsimulator->rx_num_channels=openair0_cfg->rx_num_channels;
rfsimulator->sample_rate=openair0_cfg->sample_rate;
rfsimulator->tx_bw=openair0_cfg->tx_bw;
randominit(0);
set_taus_seed(0);
return 0;
}
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment