Cleanup RF HW configuration at UE side

- removed redundant initialisation of variables
- introduced two "RF helpers" function that are replacing shared code in the sync routines
- added a new .c file and updated the cmakelists and .h files

cmake_targets/CMakeLists.txt

@@ -1628,6 +1628,7 @@ set(PHY_SRC_UE
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/sss_nr.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/cic_filter_nr.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_initial_sync.c
+  ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_ue_rf_helpers.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_pbch.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_dlsch_demodulation.c
   ${OPENAIR1_DIR}/PHY/NR_UE_TRANSPORT/nr_ulsch_coding.c

executables/nr-ue.c

@@ -246,37 +246,25 @@ static void UE_synch(void *arg) {
     case pbch:
       LOG_I(PHY, "[UE thread Synch] Running Initial Synch (mode %d)\n",UE->mode);
 
+      uint64_t dl_carrier, ul_carrier;
+      double rx_gain_off = 0;
+      nr_get_carrier_frequencies(&UE->frame_parms, &dl_carrier, &ul_carrier);
+
       if (nr_initial_sync( &syncD->proc, UE, UE->mode,2) == 0) {
         freq_offset = UE->common_vars.freq_offset; // frequency offset computed with pss in initial sync
         hw_slot_offset = ((UE->rx_offset<<1) / UE->frame_parms.samples_per_subframe * UE->frame_parms.slots_per_subframe) +
                          round((float)((UE->rx_offset<<1) % UE->frame_parms.samples_per_subframe)/UE->frame_parms.samples_per_slot0);
 
         // rerun with new cell parameters and frequency-offset
-        for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
-          openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
+        // todo: the freq_offset computed on DL shall be scaled before being applied to UL
+        nr_rf_card_config(&openair0_cfg[UE->rf_map.card], rx_gain_off, ul_carrier, dl_carrier, freq_offset);
 
-          if (freq_offset >= 0)
-            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] += abs(freq_offset);
-          else
-            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] -= abs(freq_offset);
-
-          if (uplink_frequency_offset[0][0])
-          openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
-            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] + uplink_frequency_offset[0][0];
-          else
-          openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] =
-            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i]+(UE->frame_parms.ul_CarrierFreq-UE->frame_parms.dl_CarrierFreq);
-
-          //UE->frame_parms.dl_CarrierFreq = openair0_cfg[CC_id].rx_freq[i];
-        }
-
-        LOG_I(PHY,"Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %d (DL %f Hz, UL %f Hz), UE_scan_carrier %d\n",
+        LOG_I(PHY,"Got synch: hw_slot_offset %d, carrier off %d Hz, rxgain %f (DL %f Hz, UL %f Hz)\n",
               hw_slot_offset,
               freq_offset,
-              UE->rx_total_gain_dB,
+              openair0_cfg[UE->rf_map.card].rx_gain[0],
               openair0_cfg[UE->rf_map.card].rx_freq[0],
-              openair0_cfg[UE->rf_map.card].tx_freq[0],
-              UE->UE_scan_carrier);
+              openair0_cfg[UE->rf_map.card].tx_freq[0]);
 
         // reconfigure for potentially different bandwidth
         switch(UE->frame_parms.N_RB_DL) {
@@ -332,45 +320,21 @@ static void UE_synch(void *arg) {
           UE->is_synchronized = 1;
         }
       } else {
-        // initial sync failed
-        // calculate new offset and try again
-        if (UE->UE_scan_carrier == 1) {
 
-          uint64_t dl_carrier, ul_carrier;
+        if (UE->UE_scan_carrier == 1) {
 
           if (freq_offset >= 0)
             freq_offset += 100;
 
           freq_offset *= -1;
 
-          if (downlink_frequency[0][0])
-            dl_carrier = downlink_frequency[0][0];
-          else
-            dl_carrier = UE->frame_parms.dl_CarrierFreq;
+          nr_rf_card_config(&openair0_cfg[UE->rf_map.card], rx_gain_off, ul_carrier, dl_carrier, freq_offset);
 
-          if (uplink_frequency_offset[0][0])
-            ul_carrier = dl_carrier + uplink_frequency_offset[0][0];
-          else
-            ul_carrier = dl_carrier + UE->frame_parms.ul_CarrierFreq - UE->frame_parms.dl_CarrierFreq;
-
-          for (i=0; i<openair0_cfg[UE->rf_map.card].rx_num_channels; i++) {
-            openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i] = dl_carrier + freq_offset;
-            openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i] = ul_carrier + freq_offset;
-            openair0_cfg[UE->rf_map.card].rx_gain[UE->rf_map.chain+i] = UE->rx_total_gain_dB;//-USRP_GAIN_OFFSET;
-
-          LOG_I(PHY, "[initial_sync] trying carrier off %d Hz, rxgain %d (DL %f, UL %f)\n",
-                freq_offset,
-                UE->rx_total_gain_dB,
-                openair0_cfg[UE->rf_map.card].rx_freq[UE->rf_map.chain+i],
-                openair0_cfg[UE->rf_map.card].tx_freq[UE->rf_map.chain+i]);
-
-            if (UE->UE_scan_carrier==1)
-              openair0_cfg[UE->rf_map.card].autocal[UE->rf_map.chain+i] = 1;
-          }
+          LOG_I(PHY, "Initial sync failed: trying carrier off %d Hz\n", freq_offset);
 
           if (UE->mode != loop_through_memory)
             UE->rfdevice.trx_set_freq_func(&UE->rfdevice,&openair0_cfg[0],0);
-        }// initial_sync=0
+        }
 
         break;
 

executables/nr-uesoftmodem.c

@@ -40,7 +40,7 @@
 //#undef FRAME_LENGTH_COMPLEX_SAMPLES //there are two conflicting definitions, so we better make sure we don't use it at all
 #include "openair1/PHY/MODULATION/nr_modulation.h"
 #include "PHY/phy_vars_nr_ue.h"
-#include "PHY/LTE_TRANSPORT/transport_vars.h"
+#include "PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h"
 #include "SCHED/sched_common_vars.h"
 #include "PHY/MODULATION/modulation_vars.h"
 //#include "../../SIMU/USER/init_lte.h"
@@ -304,6 +304,7 @@ void set_options(int CC_id, PHY_VARS_NR_UE *UE){
   UE->no_timing_correction = UE_no_timing_correction;
   UE->mode                 = mode;
   UE->rx_total_gain_dB     = (int)rx_gain[CC_id][0] + rx_gain_off;
+  UE->tx_total_gain_dB     = (int)tx_gain[CC_id][0];
   UE->tx_power_max_dBm     = tx_max_power[CC_id];
 
   LOG_I(PHY,"Set UE mode %d, UE_fo_compensation %d, UE_scan %d, UE_scan_carrier %d, UE_no_timing_correction %d \n", mode, UE_fo_compensation, UE_scan, UE_scan_carrier, UE_no_timing_correction);
@@ -328,10 +329,11 @@ void set_options(int CC_id, PHY_VARS_NR_UE *UE){
 
 void init_openair0(void) {
   int card;
-  int i;
+  int freq_off = 0;
   NR_DL_FRAME_PARMS *frame_parms = &PHY_vars_UE_g[0][0]->frame_parms;
 
   for (card=0; card<MAX_CARDS; card++) {
+    uint64_t dl_carrier, ul_carrier;
     openair0_cfg[card].configFilename = NULL;
     openair0_cfg[card].threequarter_fs = frame_parms->threequarter_fs;
     numerology = frame_parms->numerology_index;
@@ -424,11 +426,6 @@ void init_openair0(void) {
     else
       openair0_cfg[card].duplex_mode = duplex_mode_FDD;
 
-    LOG_I(PHY, "HW: Configuring card %d, nb_antennas_tx/rx %hhu/%hhu\n",
-      card,
-      frame_parms->nb_antennas_tx,
-      frame_parms->nb_antennas_rx);
-
     openair0_cfg[card].Mod_id = 0;
     openair0_cfg[card].num_rb_dl = frame_parms->N_RB_DL;
     openair0_cfg[card].clock_source = get_softmodem_params()->clock_source;
@@ -436,36 +433,17 @@ void init_openair0(void) {
     openair0_cfg[card].tx_num_channels = min(2, frame_parms->nb_antennas_tx);
     openair0_cfg[card].rx_num_channels = min(2, frame_parms->nb_antennas_rx);
 
-    for (i=0; i<4; i++) {
+    LOG_I(PHY, "HW: Configuring card %d, tx/rx num_channels %d/%d, duplex_mode %s\n",
+      card,
+      openair0_cfg[card].tx_num_channels,
+      openair0_cfg[card].rx_num_channels,
+      duplex_mode[openair0_cfg[card].duplex_mode]);
 
-      if (i<openair0_cfg[card].rx_num_channels){
-        if (downlink_frequency[0][0])
-          openair0_cfg[card].rx_freq[i] = downlink_frequency[0][0];
-        else
-          openair0_cfg[card].rx_freq[i] = frame_parms->dl_CarrierFreq;
-      }
-      else
-        openair0_cfg[card].rx_freq[i]=0.0;
+    nr_get_carrier_frequencies(frame_parms, &dl_carrier, &ul_carrier);
 
-      if (i<openair0_cfg[card].tx_num_channels){
-        if (uplink_frequency_offset[0][0])
-          openair0_cfg[card].tx_freq[i] = openair0_cfg[card].rx_freq[i] + uplink_frequency_offset[0][0];
-        else
-          openair0_cfg[card].tx_freq[i] = frame_parms->ul_CarrierFreq;
-      }
-      else
-        openair0_cfg[card].tx_freq[i]=0.0;
+    nr_rf_card_config(&openair0_cfg[card], rx_gain_off, ul_carrier, dl_carrier, freq_off);
 
-      openair0_cfg[card].autocal[i] = 1;
-      openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
-      openair0_cfg[card].rx_gain[i] = PHY_vars_UE_g[0][0]->rx_total_gain_dB - rx_gain_off;
     openair0_cfg[card].configFilename = get_softmodem_params()->rf_config_file;
-      printf("Card %d, channel %d, Setting tx_gain %f, rx_gain %f, tx_freq %f, rx_freq %f\n",
-             card,i, openair0_cfg[card].tx_gain[i],
-             openair0_cfg[card].rx_gain[i],
-             openair0_cfg[card].tx_freq[i],
-             openair0_cfg[card].rx_freq[i]);
-    }
 
     if (usrp_args) openair0_cfg[card].sdr_addrs = usrp_args;
 

openair1/PHY/NR_UE_TRANSPORT/nr_transport_proto_ue.h

@@ -1452,6 +1452,31 @@ int nr_initial_sync(UE_nr_rxtx_proc_t *proc,
                     runmode_t mode,
                     int n_frames);
 
+/*!
+  \brief This function gets the carrier frequencies either from FP or command-line-set global variables, depending on the availability of the latter
+  @param fp         Pointer to frame params
+  @param dl_Carrier Pointer to DL carrier to be set
+  @param ul_Carrier Pointer to UL carrier to be set
+*/
+void nr_get_carrier_frequencies(NR_DL_FRAME_PARMS *fp,
+                                uint64_t *dl_Carrier,
+                                uint64_t *ul_Carrier);
+
+/*!
+  \brief This function sets the OAI RF card rx/tx params
+  @param openair0_cfg   Pointer OAI config for a specific card
+  @param tx_gain_off    Tx gain offset
+  @param rx_gain_off    Rx gain offset
+  @param ul_Carrier     UL carrier to be set
+  @param dl_Carrier     DL carrier to be set
+  @param freq_offset    Freq offset to be set
+*/
+void nr_rf_card_config(openair0_config_t *openair0_cfg,
+                       double rx_gain_off,
+                       uint64_t ul_Carrier,
+                       uint64_t dl_Carrier,
+                       int freq_offset);
+
 
 /*!
   \brief Encoding of PUSCH/ACK/RI/ACK from 36-212.

openair1/PHY/NR_UE_TRANSPORT/nr_ue_rf_helpers.c

+/*
+ * Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
+ * contributor license agreements.  See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The OpenAirInterface Software Alliance licenses this file to You under
+ * the OAI Public License, Version 1.0  (the "License"); you may not use this file
+ * except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.openairinterface.org/?page_id=698
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *-------------------------------------------------------------------------------
+ * For more information about the OpenAirInterface (OAI) Software Alliance:
+ *      contact@openairinterface.org
+ */
+
+/*! \file PHY/NR_UE_TRANSPORT/nr_ue_rf_config.c
+* \brief      Functional helpers to configure the RF boards at UE side
+* \author     Guido Casati
+* \date       2020
+* \version    0.1
+* \company    Fraunhofer IIS
+* \email:     guido.casati@iis.fraunhofer.de
+*/
+
+#include "PHY/defs_nr_UE.h"
+#include "PHY/phy_extern_nr_ue.h"
+#include "nr_transport_proto_ue.h"
+
+void nr_get_carrier_frequencies(NR_DL_FRAME_PARMS *fp, uint64_t *dl_carrier, uint64_t *ul_carrier){
+
+  if (downlink_frequency[0][0])
+    *dl_carrier = downlink_frequency[0][0];
+  else
+    *dl_carrier = fp->dl_CarrierFreq;
+
+  if (uplink_frequency_offset[0][0])
+    *ul_carrier = *dl_carrier + uplink_frequency_offset[0][0];
+  else
+    *ul_carrier = *dl_carrier + fp->ul_CarrierFreq - fp->dl_CarrierFreq;
+
+}
+
+void nr_rf_card_config(openair0_config_t *openair0_cfg,
+                       double rx_gain_offset,
+                       uint64_t ul_carrier,
+                       uint64_t dl_carrier,
+                       int freq_offset){
+
+  uint8_t mod_id     = 0;
+  uint8_t cc_id      = 0;
+  PHY_VARS_NR_UE *ue = PHY_vars_UE_g[mod_id][cc_id];
+  int rf_chain       = ue->rf_map.chain;
+  double rx_gain     = ue->rx_total_gain_dB;
+  double tx_gain     = ue->tx_total_gain_dB;
+
+  for (int i = rf_chain; i < rf_chain + 4; i++) {
+
+    if (i < openair0_cfg->rx_num_channels)
+      openair0_cfg->rx_freq[i + rf_chain] = dl_carrier + freq_offset;
+    else
+      openair0_cfg->rx_freq[i] = 0.0;
+
+    if (i<openair0_cfg->tx_num_channels)
+      openair0_cfg->tx_freq[i] = ul_carrier + freq_offset;
+    else
+      openair0_cfg->tx_freq[i] = 0.0;
+
+    if (tx_gain)
+      openair0_cfg->tx_gain[i] = tx_gain;
+    if (rx_gain)
+      openair0_cfg->rx_gain[i] = rx_gain - rx_gain_offset;
+
+    openair0_cfg->autocal[i] = 1;
+
+    LOG_I(PHY, "HW: Configuring channel %d (rf_chain %d): setting tx_gain %f, rx_gain %f, tx_freq %f Hz, rx_freq %f Hz\n",
+      i,
+      rf_chain,
+      openair0_cfg->tx_gain[i],
+      openair0_cfg->rx_gain[i],
+      openair0_cfg->tx_freq[i],
+      openair0_cfg->rx_freq[i]);
+
+  }
+}
\ No newline at end of file