Skip to content

O
OpenXG-RAN
Commit b28ac6d9 authored by hardy's avatar hardy
Browse files
Options

Merge remote-tracking branch 'origin/ci_benetel_test' into develop

parents fe330f7b e419ae05
Show whitespace changes
Inline Side-by-side
Showing with 1169 additions and 17 deletions
ci-scripts/Jenkinsfile-tmp-multi-enb-benetel 0 → 100644
View file @ b28ac6d9
#!/bin/groovy
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
// Template Jenkins Declarative Pipeline script to run Test w/ RF HW
// Location of the python executor node shall be in the same subnet as the others servers
def pythonExecutor = params.pythonExecutor
// Location of the test XML file to be run
def testXMLFile = params.pythonTestXmlFile
def mainPythonAllXmlFiles = ""
def buildStageStatus = true
// Name of the test stage
def testStageName = params.pipelineTestStageName
// Name of the phone resource
def ciSmartPhonesResource1 = params.SmartPhonesResource1
def ciSmartPhonesResource2 = params.SmartPhonesResource2
// Global Parameters. Normally they should be populated when the master job
// triggers the slave job with parameters
def eNB_Repository
def eNB_Branch
def eNB_CommitID
def eNB_AllowMergeRequestProcess
def eNB_TargetBranch
pipeline {
agent {
label pythonExecutor
}
options {
disableConcurrentBuilds()
ansiColor('xterm')
lock(extra: [[resource: ciSmartPhonesResource2]], resource: ciSmartPhonesResource1)
}
stages {
stage("Build Init") {
steps {
// update the build name and description
buildName "${params.eNB_MR}"
buildDescription "Branch : ${params.eNB_Branch}"
}
}
stage ("Verify Parameters") {
steps {
script {
echo '\u2705 \u001B[32mVerify Parameters\u001B[0m'
def allParametersPresent = true
// It is already to late to check it
if (params.pythonExecutor != null) {
echo "eNB CI executor node : ${pythonExecutor}"
}
// If not present picking a default Stage Name
if (params.pipelineTestStageName == null) {
// picking default
testStageName = 'Template Test Stage'
}
if (params.SmartPhonesResource1 == null) {
allParametersPresent = false
}
if (params.SmartPhonesResource2 == null) {
allParametersPresent = false
}
// 1st eNB parameters
if (params.eNB_IPAddress == null) {
allParametersPresent = false
}
if (params.eNB_SourceCodePath == null) {
allParametersPresent = false
}
if (params.eNB_Credentials == null) {
allParametersPresent = false
}
// 2nd eNB parameters
if (params.eNB1_IPAddress == null) {
allParametersPresent = false
}
if (params.eNB1_SourceCodePath == null) {
allParametersPresent = false
}
if (params.eNB1_Credentials == null) {
allParametersPresent = false
}
// 3rd eNB parameters
if (params.eNB2_IPAddress == null) {
allParametersPresent = false
}
if (params.eNB2_SourceCodePath == null) {
allParametersPresent = false
}
if (params.eNB2_Credentials == null) {
allParametersPresent = false
}
// the following 4 parameters should be pushed by the master trigger
// if not present, take the job GIT variables (used for developing)
if (params.eNB_Repository == null) {
eNB_Repository = env.GIT_URL
} else {
eNB_Repository = params.eNB_Repository
}
echo "eNB_Repository : ${eNB_Repository}"
if (params.eNB_Branch == null) {
eNB_Branch = env.GIT_BRANCH
} else {
eNB_Branch = params.eNB_Branch
}
echo "eNB_Branch : ${eNB_Branch}"
if (params.eNB_CommitID == null) {
eNB_CommitID = env.GIT_COMMIT
} else {
eNB_CommitID = params.eNB_CommitID
}
echo "eNB_CommitID : ${eNB_CommitID}"
if (params.eNB_AllowMergeRequestProcess!= null) {
eNB_AllowMergeRequestProcess = params.eNB_AllowMergeRequestProcess
if (eNB_AllowMergeRequestProcess) {
if (params.eNB_TargetBranch != null) {
eNB_TargetBranch = params.eNB_TargetBranch
} else {
eNB_TargetBranch = 'develop'
}
echo "eNB_TargetBranch : ${eNB_TargetBranch}"
}
}
if (params.EPC_IPAddress == null) {
allParametersPresent = false
}
if (params.EPC_Type == null) {
allParametersPresent = false
}
if (params.EPC_SourceCodePath == null) {
allParametersPresent = false
}
if (params.EPC_Credentials == null) {
allParametersPresent = false
}
if (params.ADB_IPAddress == null) {
allParametersPresent = false
}
if (params.ADB_Credentials == null) {
allParametersPresent = false
}
if (allParametersPresent) {
echo "All parameters are present"
if (eNB_AllowMergeRequestProcess) {
sh "git fetch"
sh "./ci-scripts/doGitLabMerge.sh --src-branch ${eNB_Branch} --src-commit ${eNB_CommitID} --target-branch ${eNB_TargetBranch} --target-commit latest"
} else {
sh "git fetch"
sh "git checkout -f ${eNB_CommitID}"
}
} else {
echo "Some parameters are missing"
sh "./ci-scripts/fail.sh"
}
}
}
}
stage ("Build and Test") {
steps {
script {
dir ('ci-scripts') {
echo "\u2705 \u001B[32m${testStageName}\u001B[0m"
// If not present picking a default XML file
if (params.pythonTestXmlFile == null) {
// picking default
testXMLFile = 'xml_files/enb_usrpB210_band7_50PRB.xml'
echo "Test XML file(default): ${testXMLFile}"
mainPythonAllXmlFiles += "--XMLTestFile=" + testXMLFile + " "
} else {
String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
for (xmlFile in myXmlTestSuite) {
if (fileExists(xmlFile)) {
mainPythonAllXmlFiles += "--XMLTestFile=" + xmlFile + " "
echo "Test XML file : ${xmlFile}"
}
}
}
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB1_Credentials}", usernameVariable: 'eNB1_Username', passwordVariable: 'eNB1_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB2_Credentials}", usernameVariable: 'eNB2_Username', passwordVariable: 'eNB2_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.EPC_Credentials}", usernameVariable: 'EPC_Username', passwordVariable: 'EPC_Password'],
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.ADB_Credentials}", usernameVariable: 'ADB_Username', passwordVariable: 'ADB_Password']
]) {
sh "python3 main.py --mode=InitiateHtml --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} ${mainPythonAllXmlFiles}"
String[] myXmlTestSuite = testXMLFile.split("\\r?\\n")
for (xmlFile in myXmlTestSuite) {
if (fileExists(xmlFile)) {
try {
sh "python3 main.py --mode=TesteNB --ranRepository=${eNB_Repository} --ranBranch=${eNB_Branch} --ranCommitID=${eNB_CommitID} --ranAllowMerge=${eNB_AllowMergeRequestProcess} --ranTargetBranch=${eNB_TargetBranch} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath} --eNB1IPAddress=${params.eNB1_IPAddress} --eNB1UserName=${eNB1_Username} --eNB1Password=${eNB1_Password} --eNB1SourceCodePath=${params.eNB1_SourceCodePath} --eNB2IPAddress=${params.eNB2_IPAddress} --eNB2UserName=${eNB2_Username} --eNB2Password=${eNB2_Password} --eNB2SourceCodePath=${params.eNB2_SourceCodePath} --EPCIPAddress=${params.EPC_IPAddress} --EPCType=${params.EPC_Type} --EPCUserName=${EPC_Username} --EPCPassword=${EPC_Password} --EPCSourceCodePath=${params.EPC_SourceCodePath} --ADBIPAddress=${params.ADB_IPAddress} --ADBUserName=${ADB_Username} --ADBPassword=${ADB_Password} --XMLTestFile=${xmlFile}"
} catch (Exception e) {
currentBuild.result = 'FAILURE'
buildStageStatus = false
}
}
}
sh "python3 main.py --mode=FinalizeHtml --finalStatus=${buildStageStatus} --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password}"
}
}
}
}
}
stage('Log Collection') {
parallel {
stage('Log Collection (eNB - Build)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (eNB - Build)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollectBuild --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
echo '\u2705 \u001B[32mLog Transfer (eNB - Build)\u001B[0m'
sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/build.log.zip ./build.log.${env.BUILD_ID}.zip || true"
}
script {
if(fileExists("build.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "build.log.${env.BUILD_ID}.zip"
}
}
}
}
stage('Log Collection (eNB - Run)') {
steps {
withCredentials([
[$class: 'UsernamePasswordMultiBinding', credentialsId: "${params.eNB_Credentials}", usernameVariable: 'eNB_Username', passwordVariable: 'eNB_Password']
]) {
echo '\u2705 \u001B[32mLog Collection (eNB - Run)\u001B[0m'
sh "python3 ci-scripts/main.py --mode=LogCollecteNB --eNBIPAddress=${params.eNB_IPAddress} --eNBUserName=${eNB_Username} --eNBPassword=${eNB_Password} --eNBSourceCodePath=${params.eNB_SourceCodePath}"
echo '\u2705 \u001B[32mLog Transfer (eNB - Run)\u001B[0m'
sh "sshpass -p \'${eNB_Password}\' scp -o 'StrictHostKeyChecking no' -o 'ConnectTimeout 10' ${eNB_Username}@${params.eNB_IPAddress}:${eNB_SourceCodePath}/cmake_targets/enb.log.zip ./enb.log.${env.BUILD_ID}.zip || true"
}
script {
if(fileExists("enb.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "enb.log.${env.BUILD_ID}.zip"
}
if(fileExists("ci-scripts/test_results.html")) {
sh "mv ci-scripts/test_results.html test_results-${JOB_NAME}.html"
sh "sed -i -e 's#TEMPLATE_JOB_NAME#${JOB_NAME}#' -e 's@build #TEMPLATE_BUILD_ID@build #${BUILD_ID}@' -e 's#Build-ID: TEMPLATE_BUILD_ID#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' -e 's#TEMPLATE_STAGE_NAME#${testStageName}#' test_results-${JOB_NAME}.html"
archiveArtifacts "test_results-${JOB_NAME}.html"
}
}
}
}
}
}
}
post {
always {
script {
if (params.pipelineZipsConsoleLog != null) {
if (params.pipelineZipsConsoleLog) {
echo "Archiving Jenkins console log"
sh "wget --no-check-certificate --no-proxy ${env.JENKINS_URL}/job/${env.JOB_NAME}/${env.BUILD_ID}/consoleText -O consoleText.log || true"
sh "zip -m consoleText.log.${env.BUILD_ID}.zip consoleText.log || true"
if(fileExists("consoleText.log.${env.BUILD_ID}.zip")) {
archiveArtifacts "consoleText.log.${env.BUILD_ID}.zip"
}
}
}
}
}
}
}
ci-scripts/Jenkinsfile-tmp-multi-enb-nsa
View file @ b28ac6d9
......@@ -34,8 +34,9 @@ def buildStageStatus = true
def testStageName = params.pipelineTestStageName
// Name of the phone resource
def ciSmartPhoneResource1 = params.smartphonesResource1
def ciSmartPhoneResource2 = params.smartphonesResource2
def ciSmartPhonesResource1 = params.SmartPhonesResource1
def ciSmartPhonesResource2 = params.SmartPhonesResource2
def ciSmartPhonesResource3 = params.SmartPhonesResource3
// Global Parameters. Normally they should be populated when the master job
// triggers the slave job with parameters
......@@ -52,7 +53,7 @@ pipeline {
options {
disableConcurrentBuilds()
ansiColor('xterm')
lock(extra: [[resource: ciSmartPhoneResource2]], resource: ciSmartPhoneResource1)
lock(extra: [[resource: ciSmartPhonesResource2],[resource: ciSmartPhonesResource3]], resource: ciSmartPhonesResource1)
}
stages {
stage("Build Init") {
......@@ -78,10 +79,13 @@ pipeline {
testStageName = 'Template Test Stage'
}
if (params.smartphonesResource1 == null) {
if (params.SmartPhonesResource1 == null) {
allParametersPresent = false
}
if (params.smartphonesResource2 == null) {
if (params.SmartPhonesResource2 == null) {
allParametersPresent = false
}
if (params.SmartPhonesResource3== null) {
allParametersPresent = false
}
// 1st eNB parameters
......
ci-scripts/Jenkinsfile-trig-nsa
View file @ b28ac6d9
......@@ -33,19 +33,21 @@ pipeline {
label pythonExecutor
}
stages {
stage ("NSA Test Loop") {
stage ("Launcher") {
steps {
script {
//retrieve MR that are opened nd with tag READY_TO_BE_MERGED
MR_LIST= sh returnStdout: true, script: 'curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests?state=opened&per_page=100&labels=READY_TO_BE_MERGED" | jq ".[].iid" || true '
echo "List of selected MR:\n${MR_LIST}"
def MR_ARRAY = MR_LIST.split('\n')
//for every selected MR, retrieve the branch name and the latest commit
for (MR in MR_ARRAY) {
SRC_BRANCH=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".source_branch" || true """
SRC_BRANCH=SRC_BRANCH.trim()
COMMIT_ID=sh returnStdout: true, script: """curl --silent "https://gitlab.eurecom.fr/api/v4/projects/oai%2Fopenairinterface5g/merge_requests/${MR}" | jq ".sha" || true """
COMMIT_ID=COMMIT_ID.trim()
echo "Testing NSA on : ${MR} ${SRC_BRANCH} ${COMMIT_ID}"
//calling sub job
//calling NSA sub job
build job: "RAN-CI-NSA-B210", wait : false, propagate : false, parameters: [
string(name: 'eNB_MR', value: String.valueOf(MR)),
string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
......@@ -53,6 +55,14 @@ pipeline {
string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
]
//calling Benetel sub job
build job: "RAN-CI-BENETEL", wait : false, propagate : false, parameters: [
string(name: 'eNB_MR', value: String.valueOf(MR)),
string(name: 'eNB_Branch', value: String.valueOf(SRC_BRANCH)),
string(name: 'eNB_CommitID', value: String.valueOf(COMMIT_ID)),
string(name: 'eNB_TargetBranch', value: String.valueOf(TARGET_BRANCH)),
booleanParam(name: 'eNB_AllowMergeRequestProcess', value: Boolean.valueOf(ALLOW_MERGE))
]
}
}
}
......
ci-scripts/conf_files/benetel-4g.conf 0 → 100644
View file @ b28ac6d9
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
# real_time choice in {hard, rt-preempt, no}
real_time = "no";
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ( { mcc = 222; mnc = 01; mnc_length = 2; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "NGFI_RCC_IF4p5";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2655000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 100;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 90;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -10;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
//Parameters for SIB18
rxPool_sc_CP_Len = "normal";
rxPool_sc_Period = "sf40";
rxPool_data_CP_Len = "normal";
rxPool_ResourceConfig_prb_Num = 20;
rxPool_ResourceConfig_prb_Start = 5;
rxPool_ResourceConfig_prb_End = 44;
rxPool_ResourceConfig_offsetIndicator_present = "prSmall";
rxPool_ResourceConfig_offsetIndicator_choice = 0;
rxPool_ResourceConfig_subframeBitmap_present = "prBs40";
rxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "00000000000000000000";
rxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
/* rxPool_dataHoppingConfig_hoppingParameter = 0;
rxPool_dataHoppingConfig_numSubbands = "ns1";
rxPool_dataHoppingConfig_rbOffset = 0;
rxPool_commTxResourceUC-ReqAllowed = "TRUE";
*/
// Parameters for SIB19
discRxPool_cp_Len = "normal"
discRxPool_discPeriod = "rf32"
discRxPool_numRetx = 1;
discRxPool_numRepetition = 2;
discRxPool_ResourceConfig_prb_Num = 5;
discRxPool_ResourceConfig_prb_Start = 3;
discRxPool_ResourceConfig_prb_End = 21;
discRxPool_ResourceConfig_offsetIndicator_present = "prSmall";
discRxPool_ResourceConfig_offsetIndicator_choice = 0;
discRxPool_ResourceConfig_subframeBitmap_present = "prBs40";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
//SSB central frequency of NR secondary cell group (for ENDC NSA)
nr_scg_ssb_freq = 640000;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
enable_measurement_reports = "yes";
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "127.0.0.1";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
phy_test_mode = 0;
puSch10xSnr = 160;
puCch10xSnr = 160;
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
prach_dtx_threshold = 150;
}
);
RUs = (
{
//local_if_name = "enp129s0f0";
local_if_name = "dpdk";
sdr_addrs = "softmodem -m 2048 -l 35 -n 2 -b 0000:81:00.3 --proc-type auto --file-prefix ggg -- -p 0x1";
#sdr_addrs = "softmodem -l 8 -n 2 -- -p 0x2";
#remote_address = "127.0.0.2";
#local_address = "127.0.0.1";
#local_portc = 50000;
#remote_portc = 50000;
#local_portd = 50001;
#remote_portd = 50001;
local_rf = "no"
tr_preference = "raw_if4p5"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
eNB_instances = [0];
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
#parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
FLEXRAN_INTERFACE_NAME = "lo";
FLEXRAN_IPV4_ADDRESS = "127.0.0.1";
FLEXRAN_PORT = 2210;
FLEXRAN_CACHE = "/mnt/oai_agent_cache";
FLEXRAN_AWAIT_RECONF = "no";
};
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/conf_files/benetel-5g.conf 0 → 100644
View file @ b28ac6d9
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 222; mnc = 01; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
#pusch_TargetSNRx10 = 200;
#pucch_TargetSNRx10 = 200;
pusch_TargetSNRx10 = 200;
pucch_TargetSNRx10 = 200;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is is the central frequency of SSB
absoluteFrequencySSB = 640000; //641272
dl_frequencyBand = 78;
# the carrier frequency is assumed to be in the middle of the carrier, i.e. dl_absoluteFrequencyPointA_kHz + dl_carrierBandwidth*12*SCS_kHz/2
dl_absoluteFrequencyPointA = 638728; //640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6366; //28875; //6366; #6407; #3384;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=2,L=12
initialDLBWPstartSymbolAndLength_1 = 53;
initialDLBWPk0_2 = 0;
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
initialDLBWPk0_3 = 0;
initialDLBWPmappingType_3 = 0;
#this is SS=1,L=4 //5 (4 is for 43, 5 is for 57)
initialDLBWPstartSymbolAndLength_3 = 57; //43; //57;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6366; //28875; //6366; #6407; #3384;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 4;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 74;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preambleReceivedTargetPower = -104;
#preambleReceivedTargetPower = -108;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 2;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; //15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 1;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
#msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPmappingType_0 = 1
# this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 2;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1;
# this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1;
#p0_NominalWithGrant =-90;
p0_NominalWithGrant =-118;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
#p0_nominal = -90;
p0_nominal = -118;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1; #0x80;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7; //8; //7;
nrofDownlinkSymbols = 6; //0; //6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4; //0; //4;
#ssPBCH_BlockPower = 10;
ssPBCH_BlockPower = -35;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "127.0.0.1";
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "CI_GNB_IP_ADDR";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "CI_GNB_IP_ADDR";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "127.0.0.2/24";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
pusch_proc_threads = 8;
}
);
RUs = (
{
local_rf = "no"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
//clock_src = "internal";
clock_src = "external";
local_if_name = "dpdk";
sdr_addrs = "softmodem -m 2048 -l 34 -n 3 -b 0000:81:00.2 --proc-type auto --file-prefix hhh -- -p 0x1";
remote_address = "127.0.0.2";
local_address = "127.0.0.1";
local_portc = 50000;
remote_portc = 50000;
local_portd = 50001;
remote_portd = 50001;
tr_preference = "raw_if4p5"
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
//parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
parallel_config = "PARALLEL_SINGLE_THREAD";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_DISABLE";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/ran.py
View file @ b28ac6d9
......@@ -239,6 +239,7 @@ class RANManagement():
while (count > 0) and buildOAIprocess:
mySSH.command('ps aux | grep --color=never build_ | grep -v grep', '\$', 6)
result = re.search('build_oai', mySSH.getBefore())
print(result)
if result is None:
buildOAIprocess = False
else:
......@@ -464,7 +465,7 @@ class RANManagement():
self.prematureExit = True
return
else:
mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting"', '\$', 4)
mySSH.command('stdbuf -o0 cat enb_' + self.testCase_id + '.log | egrep --text --color=never -i "wait|sync|Starting|Started"', '\$', 4)
if rruCheck:
result = re.search('wait RUs', mySSH.getBefore())
else:
......
ci-scripts/xml_files/benetel_multi_node_build.xml 0 → 100644
View file @ b28ac6d9
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>build-tab</htmlTabRef>
<htmlTabName>Build</htmlTabName>
<htmlTabIcon>wrench</htmlTabIcon>
<TestCaseRequestedList>
000001 000002
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="000001">
<class>Build_eNB</class>
<desc>Build eNB</desc>
<Build_eNB_args>--eNB -t benetel4g -w None</Build_eNB_args>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
</testCase>
<testCase id="000002">
<class>Build_eNB</class>
<desc>Build gNB</desc>
<Build_eNB_args>--gNB -t benetel5g -w None</Build_eNB_args>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
</testCase>
</testCaseList>
ci-scripts/xml_files/benetel_nsa_base.xml 0 → 100644
View file @ b28ac6d9
<!--
Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The OpenAirInterface Software Alliance licenses this file to You under
the OAI Public License, Version 1.1 (the "License"); you may not use this file
except in compliance with the License.
You may obtain a copy of the License at
http://www.openairinterface.org/?page_id=698
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
For more information about the OpenAirInterface (OAI) Software Alliance:
contact@openairinterface.org
-->
<testCaseList>
<htmlTabRef>TEST-FR1-TM1</htmlTabRef>
<htmlTabName>FR1</htmlTabName>
<htmlTabIcon>tasks</htmlTabIcon>
<TestCaseRequestedList>
010000
030000
040000
010001
000001
050000
050001
000001
060000
060001
000001
070000
070001
010002
000001
080001
080000
010003
</TestCaseRequestedList>
<TestCaseExclusionList></TestCaseExclusionList>
<testCase id="010000">
<class>Initialize_UE</class>
<desc>Initialize UE</desc>
</testCase>
<testCase id="010003">
<class>Terminate_UE</class>
<desc>Terminate UE</desc>
</testCase>
<testCase id="010001">
<class>Attach_UE</class>
<desc>Attach UE</desc>
</testCase>
<testCase id="010002">
<class>Detach_UE</class>
<desc>Detach UE</desc>
</testCase>
<testCase id="030000">
<class>Initialize_eNB</class>
<desc>Initialize eNB</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-4g.conf</Initialize_eNB_args>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<air_interface>lte</air_interface>
</testCase>
<testCase id="040000">
<class>Initialize_eNB</class>
<desc>Initialize gNB</desc>
<Initialize_eNB_args>-O ci-scripts/conf_files/benetel-5g.conf</Initialize_eNB_args>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<air_interface>nr</air_interface>
</testCase>
<testCase id="000001">
<class>IdleSleep</class>
<desc>Sleep</desc>
<idle_sleep_time_in_sec>20</idle_sleep_time_in_sec>
</testCase>
<testCase id="050000">
<class>Ping</class>
<desc>Ping: 20pings in 20sec</desc>
<ping_args>-c 20</ping_args>
<ping_packetloss_threshold>50</ping_packetloss_threshold>
</testCase>
<testCase id="050001">
<class>Ping</class>
<desc>Ping: 100pings in 20sec</desc>
<ping_args>-c 100 -i 0.2</ping_args>
<ping_packetloss_threshold>50</ping_packetloss_threshold>
</testCase>
<testCase id="060000">
<class>Iperf</class>
<desc>iperf (DL/2.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
<iperf_args>-u -b 2.5M -t 60 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="060001">
<class>Iperf</class>
<desc>iperf (UL/1.5Mbps/UDP)(60 sec)(single-ue profile)</desc>
<iperf_args>-u -b 1.5M -t 60 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="070000">
<class>Iperf</class>
<desc>iperf (DL/20Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 20M -t 20 -i 1</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="070001">
<class>Iperf</class>
<desc>iperf (UL/3Mbps/UDP)(20 sec)(single-ue profile)</desc>
<iperf_args>-u -b 3M -t 20 -i 1 -R</iperf_args>
<iperf_packetloss_threshold>50</iperf_packetloss_threshold>
<iperf_profile>single-ue</iperf_profile>
</testCase>
<testCase id="080000">
<class>Terminate_eNB</class>
<desc>Terminate eNB</desc>
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<air_interface>lte</air_interface>
</testCase>
<testCase id="080001">
<class>Terminate_eNB</class>
<desc>Terminate gNB</desc>
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<air_interface>nr</air_interface>
</testCase>
</testCaseList>
ci-scripts/xml_files/fr1_multi_node_build.xml
View file @ b28ac6d9
......@@ -37,6 +37,7 @@
<eNB_instance>0</eNB_instance>
<eNB_serverId>0</eNB_serverId>
<backgroundBuild>True</backgroundBuild>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
</testCase>
<testCase id="000004">
......@@ -53,6 +54,7 @@
<eNB_instance>1</eNB_instance>
<eNB_serverId>1</eNB_serverId>
<backgroundBuild>True</backgroundBuild>
<forced_workspace_cleanup>True</forced_workspace_cleanup>
</testCase>
<testCase id="000003">
......
cmake_targets/CMakeLists.txt
View file @ b28ac6d9
......@@ -926,6 +926,9 @@ set_target_properties(tcp_bridge_oai PROPERTIES COMPILE_FLAGS "-fvisibility=hidd
# Benetel 4G library
######################################################################
include_directories ("/usr/include/dpdk")
set(HWLIB_BENETEL_4G_SOURCE
${OPENAIR_TARGETS}/ARCH/ETHERNET/benetel/4g/benetel.c
${OPENAIR_TARGETS}/ARCH/ETHERNET/benetel/4g/shared_buffers.c
......
cmake_targets/build_oai
View file @ b28ac6d9
......@@ -48,7 +48,7 @@ DEADLINE_SCHEDULER_FLAG_USER=""
CPU_AFFINITY_FLAG_USER="False" #Only valid when low-latency flag is set to False
REL="Rel15"
HW="None"
TP="None"
TP="Ethernet"
EPC=0
VERBOSE_CI=0
VERBOSE_COMPILE=0
......@@ -290,6 +290,9 @@ function main() {
esac
echo_info "Setting hardware to: $HW"
shift 2;;
-t | --transport)
TP=$2
shift 2;;
-P | --phy_simulators)
SIMUS_PHY=1
echo_info "Will compile dlsim, ulsim, ..."
......@@ -941,6 +944,7 @@ function main() {
echo_info "Building transport protocol libraries"
rm -f liboai_transpro.so
rm -f $dbin/liboai_transpro.so
if [ "$TP" == "Ethernet" ]; then
compilations \
$build_dir oai_eth_transpro \
liboai_eth_transpro.so $dbin/liboai_eth_transpro.so.$REL
......@@ -948,6 +952,23 @@ function main() {
ln -sf $dbin/liboai_eth_transpro.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to ETHERNET transport"
fi
if [ "$TP" == "benetel4g" ]; then
compilations \
$build_dir benetel_4g \
libbenetel_4g.so $dbin/libbenetel_4g.$REL
ln -sf libbenetel_4g.so liboai_transpro.so
ln -sf $dbin/libbenetel_4g.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to BENETEL4G transport"
fi
if [ "$TP" == "benetel5g" ]; then
compilations \
$build_dir benetel_5g \
libbenetel_5g.so $dbin/libbenetel_5g.$REL
ln -sf libbenetel_5g.so liboai_transpro.so
ln -sf $dbin/libbenetel_5g.so.$REL $dbin/liboai_transpro.so
echo_info "liboai_transpro.so is linked to BENETEL4G transport"
fi
fi
fi
###################
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment