Skip to content

O
OpenXG-RAN
Commit d326da0d authored by Raphael Defosseux's avatar Raphael Defosseux
Browse files
Options

CI: importing from develop build and test on basic simulator 

Signed-off-by: default avatarRaphael Defosseux <raphael.defosseux@eurecom.fr>
parent 2a3f45f8
Expand all Show whitespace changes
Inline Side-by-side
Showing with 988 additions and 242 deletions
ci-scripts/Jenkinsfile-gitlab
View file @ d326da0d
...@@ -41,7 +41,7 @@ pipeline { ...@@ -41,7 +41,7 @@ pipeline {
disableConcurrentBuilds() disableConcurrentBuilds()
timestamps() timestamps()
gitLabConnection('OAI GitLab') gitLabConnection('OAI GitLab')
gitlabBuilds(builds: ["Build eNb-USRP", "Build gNb-usrp", "Build nr-UE-usrp", "Build phy-sim", "Analysis with cppcheck"]) gitlabBuilds(builds: ["Build eNb-USRP", "Build basic-sim", "Build gNb-usrp", "Build nr-UE-usrp", "Build phy-sim", "Analysis with cppcheck", "Test phy-sim", "Test basic-sim"])
ansiColor('xterm') ansiColor('xterm')
} }
...@@ -125,6 +125,12 @@ pipeline { ...@@ -125,6 +125,12 @@ pipeline {
} }
} }
stage ("Start VM -- basic-sim") {
steps {
sh "./ci-scripts/createVM.sh --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
}
}
stage ("Start VM -- phy-sim") { stage ("Start VM -- phy-sim") {
steps { steps {
sh "./ci-scripts/createVM.sh --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}" sh "./ci-scripts/createVM.sh --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
...@@ -148,28 +154,35 @@ pipeline { ...@@ -148,28 +154,35 @@ pipeline {
stage ("Analysis with cppcheck") { stage ("Analysis with cppcheck") {
steps { steps {
gitlabCommitStatus(name: "Analysis with cppcheck") { gitlabCommitStatus(name: "Analysis with cppcheck") {
sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive" sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant cppcheck --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
} }
} }
} }
stage ("Build eNb-USRP") { stage ("Build eNb-USRP") {
steps { steps {
gitlabCommitStatus(name: "Build eNb-USRP") { gitlabCommitStatus(name: "Build eNb-USRP") {
sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive" sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant enb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
}
}
}
stage ("Build basic simulator") {
steps {
gitlabCommitStatus(name: "Build basic-sim") {
sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
} }
} }
} }
stage ("Build 5G gNB-USRP") { stage ("Build 5G gNB-USRP") {
steps { steps {
gitlabCommitStatus(name: "Build gNb-usrp") { gitlabCommitStatus(name: "Build gNb-usrp") {
sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant gnb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive" sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant gnb-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
} }
} }
} }
stage ("Build 5G NR-UE-USRP") { stage ("Build 5G NR-UE-USRP") {
steps { steps {
gitlabCommitStatus(name: "Build nr-UE-usrp") { gitlabCommitStatus(name: "Build nr-UE-usrp") {
sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant nu-ue-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive" sh "./ci-scripts/buildOnVM.sh --workspace $WORKSPACE --variant nu-ue-usrp --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
} }
} }
} }
...@@ -205,7 +218,7 @@ pipeline { ...@@ -205,7 +218,7 @@ pipeline {
always { always {
script { script {
dir ('archives') { dir ('archives') {
sh "zip -r -qq vm_build_logs.zip enb_usrp phy_sim cppcheck gnb_usrp nrue_usrp red_hat" sh "zip -r -qq vm_build_logs.zip basic_sim enb_usrp phy_sim cppcheck gnb_usrp nrue_usrp red_hat"
} }
if(fileExists('archives/vm_build_logs.zip')) { if(fileExists('archives/vm_build_logs.zip')) {
archiveArtifacts artifacts: 'archives/vm_build_logs.zip' archiveArtifacts artifacts: 'archives/vm_build_logs.zip'
...@@ -225,6 +238,7 @@ pipeline { ...@@ -225,6 +238,7 @@ pipeline {
sh "./ci-scripts/reportBuildLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}" sh "./ci-scripts/reportBuildLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
} }
if(fileExists('build_results.html')) { if(fileExists('build_results.html')) {
sh "sed -i -e 's#Build-ID: ${BUILD_ID}#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' build_results.html"
archiveArtifacts artifacts: 'build_results.html' archiveArtifacts artifacts: 'build_results.html'
} }
} }
...@@ -237,13 +251,15 @@ pipeline { ...@@ -237,13 +251,15 @@ pipeline {
stage ("Test physical simulators") { stage ("Test physical simulators") {
steps { steps {
gitlabCommitStatus(name: "Test phy-sim") { gitlabCommitStatus(name: "Test phy-sim") {
sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive" sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant phy-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
} }
} }
} }
stage ("Test basic simulator") { stage ("Test basic simulator") {
steps { steps {
echo '\u2705 \u001B[32mBasic Simulator testing not done in this pipeline\u001B[0m' gitlabCommitStatus(name: "Test basic-sim") {
sh "./ci-scripts/runTestOnVM.sh --workspace $WORKSPACE --variant basic-sim --job-name ${JOB_NAME} --build-id ${BUILD_ID} --keep-vm-alive"
}
} }
} }
stage ("Test FDD - Band 7 - B210") { stage ("Test FDD - Band 7 - B210") {
...@@ -266,6 +282,7 @@ pipeline { ...@@ -266,6 +282,7 @@ pipeline {
sh "./ci-scripts/reportTestLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}" sh "./ci-scripts/reportTestLocally.sh --git-url ${GIT_URL} --job-name ${JOB_NAME} --build-id ${BUILD_ID} --trigger push --branch ${GIT_BRANCH} --commit ${GIT_COMMIT}"
} }
if(fileExists('test_simulator_results.html')) { if(fileExists('test_simulator_results.html')) {
sh "sed -i -e 's#Build-ID: ${BUILD_ID}#Build-ID: <a href=\"${BUILD_URL}\">${BUILD_ID}</a>#' test_simulator_results.html"
archiveArtifacts artifacts: 'test_simulator_results.html' archiveArtifacts artifacts: 'test_simulator_results.html'
} }
} }
...@@ -273,7 +290,6 @@ pipeline { ...@@ -273,7 +290,6 @@ pipeline {
} }
} }
} }
stage ("Destroy all Virtual Machines") { stage ("Destroy all Virtual Machines") {
steps { steps {
sh "./ci-scripts/destroyAllRunningVM.sh --job-name ${JOB_NAME} --build-id ${BUILD_ID}" sh "./ci-scripts/destroyAllRunningVM.sh --job-name ${JOB_NAME} --build-id ${BUILD_ID}"
......
ci-scripts/buildLocally.sh deleted 100755 → 0
View file @ 2a3f45f8
#!/bin/bash
function usage {
echo "OAI Local Build Check script"
echo " Original Author: Raphael Defosseux"
echo ""
echo "Usage:"
echo "------"
echo " buildLocally.sh [OPTIONS]"
echo ""
echo "Options:"
echo "--------"
echo " --workspace #### OR -ws ####"
echo " Specify the workspace"
echo ""
echo " --help OR -h"
echo " Print this help message."
echo ""
}
if [ $# -ne 2 ] && [ $# -ne 1 ]
then
echo "Syntax Error: not the correct number of arguments"
echo ""
usage
exit 1
fi
while [[ $# -gt 0 ]]
do
key="$1"
case $key in
-h|--help)
shift
usage
exit 0
;;
-ws|--workspace)
JENKINS_WKSP="$2"
shift
shift
;;
*)
echo "Syntax Error: unknown option: $key"
echo ""
usage
exit 1
esac
done
cd $JENKINS_WKSP
STATUS=0
############################################################
# Creating a tmp folder to store results and artifacts
############################################################
if [ ! -d $JENKINS_WKSP/archives ]
then
mkdir $JENKINS_WKSP/archives
fi
source oaienv
cd $JENKINS_WKSP/cmake_targets
############################################################
# Building eNb with USRP option
############################################################
ARCHIVES_LOC=$JENKINS_WKSP/archives/enb_usrp
if [ ! -d $ARCHIVES_LOC ]
then
mkdir $ARCHIVES_LOC
fi
./build_oai --eNB -w USRP -c
# Generated log files:
if [ -f $JENKINS_WKSP/cmake_targets/log/lte-softmodem.Rel14.txt ]
then
LOCAL_STAT=`egrep -c "Built target lte-softmodem" $JENKINS_WKSP/cmake_targets/log/lte-softmodem.Rel14.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/lte-softmodem.Rel14.txt $ARCHIVES_LOC
else
STATUS=-1
fi
if [ -f $JENKINS_WKSP/cmake_targets/log/params_libconfig.Rel14.txt ]
then
LOCAL_STAT=`egrep -c "Built target params_libconfig" $JENKINS_WKSP/cmake_targets/log/params_libconfig.Rel14.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/params_libconfig.Rel14.txt $ARCHIVES_LOC
else
STATUS=-1
fi
if [ -f $JENKINS_WKSP/cmake_targets/log/coding.Rel14.txt ]
then
LOCAL_STAT=`egrep -c "Built target coding" $JENKINS_WKSP/cmake_targets/log/coding.Rel14.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/coding.Rel14.txt $ARCHIVES_LOC
else
STATUS=-1
fi
if [ -f $JENKINS_WKSP/cmake_targets/log/oai_usrpdevif.Rel14.txt ]
then
LOCAL_STAT=`egrep -c "Built target oai_usrpdevif" $JENKINS_WKSP/cmake_targets/log/oai_usrpdevif.Rel14.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/oai_usrpdevif.Rel14.txt $ARCHIVES_LOC
else
STATUS=-1
fi
############################################################
# Building basic simulator
############################################################
ARCHIVES_LOC=$JENKINS_WKSP/archives/basic_sim
if [ ! -d $ARCHIVES_LOC ]
then
mkdir $ARCHIVES_LOC
fi
cd $JENKINS_WKSP/cmake_targets
./build_oai --basic-simulator -c
# Generated log files:
if [ -f $JENKINS_WKSP/cmake_targets/log/basic_simulator_enb.txt ]
then
LOCAL_STAT=`egrep -c "Built target lte-softmodem" $JENKINS_WKSP/cmake_targets/log/basic_simulator_enb.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/basic_simulator_enb.txt $ARCHIVES_LOC
else
STATUS=-1
fi
if [ -f $JENKINS_WKSP/cmake_targets/log/basic_simulator_ue.txt ]
then
LOCAL_STAT=`egrep -c "Built target lte-uesoftmodem" $JENKINS_WKSP/cmake_targets/log/basic_simulator_ue.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/basic_simulator_ue.txt $ARCHIVES_LOC
else
STATUS=-1
fi
if [ -f $JENKINS_WKSP/cmake_targets/log/conf2uedata.Rel14.txt ]
then
LOCAL_STAT=`egrep -c "Built target conf2uedata" $JENKINS_WKSP/cmake_targets/log/conf2uedata.Rel14.txt`
if [ $LOCAL_STAT -eq 0 ]; then STATUS=-1; fi
cp $JENKINS_WKSP/cmake_targets/log/conf2uedata.Rel14.txt $ARCHIVES_LOC
else
STATUS=-1
fi
############################################################
# Creating a zip for Jenkins archiving
############################################################
cd $JENKINS_WKSP/archives/
zip -r local_build_logs.zip basic_sim enb_usrp
exit $STATUS
ci-scripts/buildOnVM.sh
View file @ d326da0d
...@@ -90,6 +90,7 @@ JOB_NAME=XX ...@@ -90,6 +90,7 @@ JOB_NAME=XX
BUILD_ID=XX BUILD_ID=XX
VM_NAME=ci-enb-usrp VM_NAME=ci-enb-usrp
VM_MEMORY=2048 VM_MEMORY=2048
VM_CPU=4
ARCHIVES_LOC=enb_usrp ARCHIVES_LOC=enb_usrp
LOG_PATTERN=.Rel15.txt LOG_PATTERN=.Rel15.txt
NB_PATTERN_FILES=4 NB_PATTERN_FILES=4
...@@ -139,6 +140,8 @@ case $key in ...@@ -139,6 +140,8 @@ case $key in
LOG_PATTERN=basic_simulator LOG_PATTERN=basic_simulator
NB_PATTERN_FILES=2 NB_PATTERN_FILES=2
BUILD_OPTIONS="--basic-simulator" BUILD_OPTIONS="--basic-simulator"
VM_MEMORY=8192
VM_CPU=4
shift shift
;; ;;
-v3) -v3)
...@@ -206,6 +209,8 @@ case $key in ...@@ -206,6 +209,8 @@ case $key in
LOG_PATTERN=basic_simulator LOG_PATTERN=basic_simulator
NB_PATTERN_FILES=2 NB_PATTERN_FILES=2
BUILD_OPTIONS="--basic-simulator" BUILD_OPTIONS="--basic-simulator"
VM_MEMORY=8192
VM_CPU=4
;; ;;
phy-sim) phy-sim)
VM_NAME=ci-phy-sim VM_NAME=ci-phy-sim
...@@ -304,7 +309,7 @@ then ...@@ -304,7 +309,7 @@ then
echo "############################################################" echo "############################################################"
echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base" echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################" echo "############################################################"
uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu 4 --unsafe-caching --template ci-scripts/template-host.xml uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
fi fi
echo "Waiting for VM to be started" echo "Waiting for VM to be started"
...@@ -323,6 +328,7 @@ echo "############################################################" ...@@ -323,6 +328,7 @@ echo "############################################################"
echo "Running install and build script on VM ($VM_NAME)" echo "Running install and build script on VM ($VM_NAME)"
echo "############################################################" echo "############################################################"
echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS echo "sudo cp 01proxy /etc/apt/apt.conf.d/" > $VM_CMDS
echo "touch /home/ubuntu/.hushlogin" >> $VM_CMDS
if [[ "$VM_NAME" == *"-cppcheck"* ]] if [[ "$VM_NAME" == *"-cppcheck"* ]]
then then
echo "echo \"sudo apt-get --yes --quiet install zip cppcheck \"" >> $VM_CMDS echo "echo \"sudo apt-get --yes --quiet install zip cppcheck \"" >> $VM_CMDS
......
ci-scripts/conf_files/enb.band7.tm1.100PRB.usrpb210.conf
View file @ d326da0d
...@@ -33,7 +33,7 @@ eNBs = ...@@ -33,7 +33,7 @@ eNBs =
tdd_config_s = 0; tdd_config_s = 0;
prefix_type = "NORMAL"; prefix_type = "NORMAL";
eutra_band = 7; eutra_band = 7;
downlink_frequency = 2685000000L; downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000; uplink_frequency_offset = -120000000;
Nid_cell = 0; Nid_cell = 0;
N_RB_DL = 100; N_RB_DL = 100;
...@@ -183,12 +183,14 @@ eNBs = ...@@ -183,12 +183,14 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
}; };
} }
); );
......
ci-scripts/conf_files/enb.band7.tm1.25PRB.usrpb210.conf
View file @ d326da0d
...@@ -33,7 +33,7 @@ eNBs = ...@@ -33,7 +33,7 @@ eNBs =
tdd_config_s = 0; tdd_config_s = 0;
prefix_type = "NORMAL"; prefix_type = "NORMAL";
eutra_band = 7; eutra_band = 7;
downlink_frequency = 2685000000L; downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000; uplink_frequency_offset = -120000000;
Nid_cell = 0; Nid_cell = 0;
N_RB_DL = 25; N_RB_DL = 25;
...@@ -183,12 +183,14 @@ eNBs = ...@@ -183,12 +183,14 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
}; };
} }
); );
......
ci-scripts/conf_files/enb.band7.tm1.50PRB.usrpb210.conf
View file @ d326da0d
...@@ -33,7 +33,7 @@ eNBs = ...@@ -33,7 +33,7 @@ eNBs =
tdd_config_s = 0; tdd_config_s = 0;
prefix_type = "NORMAL"; prefix_type = "NORMAL";
eutra_band = 7; eutra_band = 7;
downlink_frequency = 2685000000L; downlink_frequency = 2680000000L;
uplink_frequency_offset = -120000000; uplink_frequency_offset = -120000000;
Nid_cell = 0; Nid_cell = 0;
N_RB_DL = 50; N_RB_DL = 50;
...@@ -183,12 +183,14 @@ eNBs = ...@@ -183,12 +183,14 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "eth0"; ENB_INTERFACE_NAME_FOR_S1_MME = "eth0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24"; ENB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
ENB_INTERFACE_NAME_FOR_S1U = "eth0"; ENB_INTERFACE_NAME_FOR_S1U = "eth0";
ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24"; ENB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "192.168.12.111/24";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
}; };
} }
); );
......
ci-scripts/conf_files/lte-basic-sim.conf 0 → 100644
View file @ d326da0d
This diff is collapsed.
ci-scripts/createVM.sh
View file @ d326da0d
...@@ -84,6 +84,7 @@ JOB_NAME=XX ...@@ -84,6 +84,7 @@ JOB_NAME=XX
BUILD_ID=XX BUILD_ID=XX
VM_NAME=ci-enb-usrp VM_NAME=ci-enb-usrp
VM_MEMORY=2048 VM_MEMORY=2048
VM_CPU=4
while [[ $# -gt 0 ]] while [[ $# -gt 0 ]]
do do
...@@ -111,6 +112,7 @@ case $key in ...@@ -111,6 +112,7 @@ case $key in
;; ;;
-v2) -v2)
VM_NAME=ci-basic-sim VM_NAME=ci-basic-sim
VM_MEMORY=8192
shift shift
;; ;;
-v3) -v3)
...@@ -146,6 +148,7 @@ case $key in ...@@ -146,6 +148,7 @@ case $key in
;; ;;
basic-sim) basic-sim)
VM_NAME=ci-basic-sim VM_NAME=ci-basic-sim
VM_MEMORY=8192
;; ;;
phy-sim) phy-sim)
VM_NAME=ci-phy-sim VM_NAME=ci-phy-sim
...@@ -196,11 +199,12 @@ VM_CMDS=${VM_NAME}_cmds.txt ...@@ -196,11 +199,12 @@ VM_CMDS=${VM_NAME}_cmds.txt
echo "VM_NAME = $VM_NAME" echo "VM_NAME = $VM_NAME"
echo "VM_MEMORY = $VM_MEMORY MBytes" echo "VM_MEMORY = $VM_MEMORY MBytes"
echo "VM_CPU = $VM_CPU"
echo "############################################################" echo "############################################################"
echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base" echo "Creating VM ($VM_NAME) on Ubuntu Cloud Image base"
echo "############################################################" echo "############################################################"
uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu 4 --unsafe-caching --template ci-scripts/template-host.xml uvt-kvm create $VM_NAME release=xenial --memory $VM_MEMORY --cpu $VM_CPU --unsafe-caching --template ci-scripts/template-host.xml
echo "Waiting for VM to be started" echo "Waiting for VM to be started"
uvt-kvm wait $VM_NAME --insecure uvt-kvm wait $VM_NAME --insecure
......
ci-scripts/reportTestLocally.sh
View file @ d326da0d
...@@ -317,9 +317,74 @@ then ...@@ -317,9 +317,74 @@ then
echo " <th>Statistics</th>" >> ./test_simulator_results.html echo " <th>Statistics</th>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html echo " </tr>" >> ./test_simulator_results.html
PING_TESTS=`ls $ARCHIVES_LOC/ping*txt` BW_CASES=(05 10 20)
for PING_CASE in $PING_TESTS for BW in ${BW_CASES[@]}
do do
ENB_LOG=$ARCHIVES_LOC/enb_${BW}MHz.log
UE_LOG=`echo $ENB_LOG | sed -e "s#enb#ue#"`
if [ -f $ENB_LOG ] && [ -f $UE_LOG ]
then
NAME_ENB=`echo $ENB_LOG | sed -e "s#$ARCHIVES_LOC/##"`
NAME_UE=`echo $UE_LOG | sed -e "s#$ARCHIVES_LOC/##"`
echo " <tr>" >> ./test_simulator_results.html
echo " <td>$NAME_ENB --- $NAME_UE</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html
NB_ENB_GOT_SYNC=`egrep -c "got sync" $ENB_LOG`
NB_UE_GOT_SYNC=`egrep -c "got sync" $UE_LOG`
NB_ENB_SYNCED_WITH_UE=`egrep -c "got UE capabilities for UE" $ENB_LOG`
if [ $NB_ENB_GOT_SYNC -eq 1 ] && [ $NB_UE_GOT_SYNC -eq 2 ] && [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
then
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
else
echo " <td bgcolor = \"red\" >OK</td>" >> ./test_simulator_results.html
fi
echo " <td><pre>" >> ./test_simulator_results.html
if [ $NB_ENB_GOT_SYNC -eq 1 ]
then
echo "<font color = \"blue\">- eNB --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- eNB NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_UE_GOT_SYNC -eq 2 ]
then
echo "<font color = \"blue\">- UE --> got sync</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- UE NEVER got sync</b></font>" >> ./test_simulator_results.html
fi
if [ $NB_ENB_SYNCED_WITH_UE -eq 1 ]
then
echo "<font color = \"blue\">- UE attached to eNB</font>" >> ./test_simulator_results.html
else
echo "<font color = \"red\"><b>- UE NEVER attached to eNB</b></font>" >> ./test_simulator_results.html
fi
NB_SEGFAULT_ENB=`egrep -i -c "Segmentation Fault" $ENB_LOG`
if [ $NB_SEGFAULT_ENB -ne 0 ]
then
echo "<font color = \"red\"><b>- eNB --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
fi
NB_SEGFAULT_UE=`egrep -i -c "Segmentation Fault" $UE_LOG`
if [ $NB_SEGFAULT_UE -ne 0 ]
then
echo "<font color = \"red\"><b>- UE --> Segmentation Fault</b></font>" >> ./test_simulator_results.html
fi
NB_ASSERTION_ENB=`egrep -i -c "Assertion" $ENB_LOG`
if [ $NB_ASSERTION_ENB -ne 0 ]
then
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $ENB_LOG >> ./test_simulator_results.html
fi
NB_ASSERTION_UE=`egrep -i -c "Assertion" $UE_LOG`
if [ $NB_ASSERTION_UE -ne 0 ]
then
echo "<font color = \"red\"><b>- eNB --> Assertion</b></font>" >> ./test_simulator_results.html
awk 'BEGIN{assertion=10}{if(assertion < 3){print " " $0; assertion++};if ($0 ~/Assertion/){print " " $0;assertion=1}}END{}' $UE_LOG >> ./test_simulator_results.html
fi
echo " </pre></td>" >> ./test_simulator_results.html
echo " </tr>" >> ./test_simulator_results.html
fi
PING_CASE=$ARCHIVES_LOC/${BW}MHz_ping_ue.txt
if [ -f $PING_CASE ]
then
echo " <tr>" >> ./test_simulator_results.html echo " <tr>" >> ./test_simulator_results.html
NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"` NAME=`echo $PING_CASE | sed -e "s#$ARCHIVES_LOC/##"`
echo " <td>$NAME</td>" >> ./test_simulator_results.html echo " <td>$NAME</td>" >> ./test_simulator_results.html
...@@ -353,9 +418,15 @@ then ...@@ -353,9 +418,15 @@ then
echo " </td>" >> ./test_simulator_results.html echo " </td>" >> ./test_simulator_results.html
fi fi
echo " </tr>" >> ./test_simulator_results.html echo " </tr>" >> ./test_simulator_results.html
done fi
IPERF_TESTS=`ls $ARCHIVES_LOC/iperf*client*txt` if [ -f $ARCHIVES_LOC/${BW}*iperf*dl*client*txt ]
then
IPERF_TESTS=`ls $ARCHIVES_LOC/${BW}*iperf*client*txt`
else
echo "There are no iperf files"
IPERF_TESTS=""
fi
for IPERF_CASE in $IPERF_TESTS for IPERF_CASE in $IPERF_TESTS
do do
echo " <tr>" >> ./test_simulator_results.html echo " <tr>" >> ./test_simulator_results.html
...@@ -363,12 +434,6 @@ then ...@@ -363,12 +434,6 @@ then
echo " <td>$NAME</td>" >> ./test_simulator_results.html echo " <td>$NAME</td>" >> ./test_simulator_results.html
CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"` CMD=`egrep "COMMAND IS" $IPERF_CASE | sed -e "s#COMMAND IS: ##"`
echo " <td>$CMD</td>" >> ./test_simulator_results.html echo " <td>$CMD</td>" >> ./test_simulator_results.html
FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
if [ $FILE_COMPLETE -eq 0 ]
then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
echo " <td>N/A</td>" >> ./test_simulator_results.html
else
REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"` REQ_BITRATE=`echo $CMD | sed -e "s#^.*-b ##" -e "s#-i 1.*##"`
if [[ $REQ_BITRATE =~ .*K.* ]] if [[ $REQ_BITRATE =~ .*K.* ]]
then then
...@@ -385,6 +450,18 @@ then ...@@ -385,6 +450,18 @@ then
REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"` REQ_BITRATE=`echo $REQ_BITRATE | sed -e "s#G##"`
FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l` FLOAT_REQ_BITRATE=`echo "$REQ_BITRATE * 1000000000.0" | bc -l`
fi fi
FILE_COMPLETE=`egrep -c "Server Report" $IPERF_CASE`
if [ $FILE_COMPLETE -eq 0 ]
then
echo " <td bgcolor = \"red\" >KO</td>" >> ./test_simulator_results.html
SERVER_FILE=`echo $IPERF_CASE | sed -e "s#client#server#"`
FLOAT_EFF_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; printf "%.0f", br}'`
EFFECTIVE_BITRATE=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*Bytes *##" -e "s#sec *.*#sec#" | awk 'BEGIN{s=0;n=0}{n++;if ($2 ~/Mbits/){a = $1 * 1000000};if ($2 ~/Kbits/){a = $1 * 1000};s=s+a}END{br=s/n; if(br>1000000){printf "%.2f MBits/sec", br/1000000}}'`
PERF=`echo "100 * $FLOAT_EFF_BITRATE / $FLOAT_REQ_BITRATE" | bc -l | awk '{printf "%.2f", $0}'`
JITTER=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*/sec *##" -e "s# *ms.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{jitter=s/n; printf "%.3f ms", jitter}'`
PACKETLOSS_NOSIGN=`grep --color=never sec $SERVER_FILE | sed -e "s#^.*(##" -e "s#%.*##" | awk 'BEGIN{s=0;n=0}{n++;s+=$1}END{per=s/n; printf "%.1f", per}'`
PACKETLOSS=`echo "${PACKETLOSS_NOSIGN}%"`
else
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"` EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]] if [[ $EFFECTIVE_BITRATE =~ .*Kbits/sec.* ]]
then then
...@@ -409,20 +486,21 @@ then ...@@ -409,20 +486,21 @@ then
else else
echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html echo " <td bgcolor = \"green\" >OK</td>" >> ./test_simulator_results.html
fi fi
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"`
PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"`
fi
echo " <td>" >> ./test_simulator_results.html echo " <td>" >> ./test_simulator_results.html
echo " <pre>" >> ./test_simulator_results.html echo " <pre>" >> ./test_simulator_results.html
EFFECTIVE_BITRATE=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*MBytes *##" -e "s#sec.*#sec#"`
echo "Bitrate : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html echo "Bitrate : $EFFECTIVE_BITRATE" >> ./test_simulator_results.html
echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html echo "Bitrate Perf : $PERF %" >> ./test_simulator_results.html
JITTER=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*Mbits/sec *##" -e "s#ms.*#ms#"`
echo "Jitter : $JITTER" >> ./test_simulator_results.html echo "Jitter : $JITTER" >> ./test_simulator_results.html
PACKETLOSS=`tail -n3 $IPERF_CASE | egrep "Mbits/sec" | sed -e "s#^.*(##" -e "s#).*##"`
echo "Packet Loss : $PACKETLOSS" >> ./test_simulator_results.html echo "Packet Loss : $PACKETLOSS" >> ./test_simulator_results.html
echo " </pre>" >> ./test_simulator_results.html echo " </pre>" >> ./test_simulator_results.html
echo " </td>" >> ./test_simulator_results.html echo " </td>" >> ./test_simulator_results.html
fi
echo " </tr>" >> ./test_simulator_results.html echo " </tr>" >> ./test_simulator_results.html
done done
done
echo " </table>" >> ./test_simulator_results.html echo " </table>" >> ./test_simulator_results.html
fi fi
......
ci-scripts/runTestOnVM.sh
View file @ d326da0d
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment