Skip to content

O
OpenXG-RAN
Commit e67c9df2 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options 

git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5949 818b1a75-f10b-46b9-bf7c-635c3b92a50f
parent 2e2bdc42
Show whitespace changes
Inline Side-by-side
Showing with 111 additions and 87 deletions
targets/ARCH/COMMON/common_lib.h
View file @ e67c9df2
......@@ -106,13 +106,13 @@ struct openair0_device_t {
* the first channel. timestamp if the time (in samples) at which the first sample
* MUST be sent
* use flags = 1 to send as timestamp specfied*/
void (*trx_write_func)(openair0_device *device, openair0_timestamp timestamp, const void *buff, int nsamps, int flags);
void (*trx_write_func)(openair0_device *device, openair0_timestamp timestamp, const void **buff, int nsamps, int cc, int flags);
/* Read 'nsamps' samples from each channel to buffers. buff[0] is the array for
* the first channel. *ptimestamp is the time at which the first sample
* was received.
* Return the number of sample read */
int (*trx_read_func)(openair0_device *device, openair0_timestamp *ptimestamp, void *buff, int nsamps);
int (*trx_read_func)(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps,int cc);
/* Terminate operation of the transceiver -- free all associated resources */
void (*trx_end_func)(openair0_device *device);
......
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.c
View file @ e67c9df2
......@@ -186,12 +186,16 @@ int trx_eth_start(openair0_device *openair0) {
}
void trx_eth_write(openair0_device *device, openair0_timestamp timestamp, const void *buff, int nsamps, int flags)
void trx_eth_write(openair0_device *device, openair0_timestamp timestamp, const void *buff, int nsamps, int cc, int flags)
{
ethernet_write_data(device->Mod_id,timestamp,buff,0,nsamps);
int i;
for (i=0;i<cc;i++)
ethernet_write_data(device->Mod_id,timestamp,buff,i,nsamps);
}
int trx_eth_read(openair0_device *device, openair0_timestamp *ptimestamp, void *buff, int nsamps) {
int trx_eth_read(openair0_device *device, openair0_timestamp *ptimestamp, void *buff, int nsamps,int cc) {
int i;
for (i=0;i<cc;i++)
return(ethernet_read_data(device->Mod_id,ptimestamp,buff,0,nsamps));
}
......
targets/ARCH/ETHERNET/USERSPACE/LIB/ethernet_lib.h
View file @ e67c9df2
......@@ -10,6 +10,6 @@
int ethernet_socket_init(int Mod_id, char *dest_ip,int dest_port);
int ethernet_write_data(int Mod_id, const void *buff, int nsamps);
int ethernet_write_data(int Mod_id, const void *buff, int nsamps,int cc);
int ethernet_read_data(int Mod_id,void *buff, int nsamps);
int ethernet_read_data(int Mod_id,void *buff, int nsamps,int cc);
targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp
View file @ e67c9df2
......@@ -119,7 +119,7 @@ static void trx_usrp_end(openair0_device *device)
s->tx_stream->send("", 0, s->tx_md);
s->tx_md.end_of_burst = false;
}
static void trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, const void *buff, int nsamps, int flags)
static void trx_usrp_write(openair0_device *device, openair0_timestamp timestamp, const void **buff, int nsamps, int flags)
{
usrp_state_t *s = (usrp_state_t*)device->priv;
......@@ -132,13 +132,13 @@ static void trx_usrp_write(openair0_device *device, openair0_timestamp timestamp
s->tx_md.start_of_burst = false;
}
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void *buff, int nsamps)
static int trx_usrp_read(openair0_device *device, openair0_timestamp *ptimestamp, void **buff, int nsamps, int cc)
{
usrp_state_t *s = (usrp_state_t*)device->priv;
int samples_received;
//TODO: only one channel is supported now
int samples_received[cc],i;
samples_received = s->rx_stream->recv(buff, nsamps, s->rx_md);
//handle the error code
......@@ -204,6 +204,8 @@ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cf
// Initialize USRP device
std::string args = "type=b200";
uhd::device_addrs_t device_adds = uhd::device::find(args);
size_t i;
if(device_adds.size() == 0)
{
std::cerr<<"No USRP Device Found. " << std::endl;
......@@ -219,17 +221,31 @@ int openair0_device_init(openair0_device* device, openair0_config_t *openair0_cf
s->usrp->set_rx_rate(openair0_cfg[0].sample_rate);
s->usrp->set_tx_rate(openair0_cfg[0].sample_rate);
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[0]);
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[0]);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[0]);
s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[0]);
for(i=0;i<usrp->get_rx_num_channels();i++) {
if (i<openair0_cfg[0].rx_num_channels) {
s->usrp->set_rx_freq(openair0_cfg[0].rx_freq[i]);
s->usrp->set_rx_gain(openair0_cfg[0].rx_gain[i]);
}
}
for(i=0;i<usrp->get_tx_num_channels();i++) {
if (i<openair0_cfg[0].tx_num_channels) {
s->usrp->set_tx_freq(openair0_cfg[0].tx_freq[i]);
s->usrp->set_tx_gain(openair0_cfg[0].tx_gain[i]);
}
}
s->usrp->set_tx_bandwidth(openair0_cfg[0].tx_bw);
s->usrp->set_rx_bandwidth(openair0_cfg[0].rx_bw);
// create tx & rx streamer
uhd::stream_args_t stream_args("sc16", "sc16");
s->tx_stream = s->usrp->get_tx_stream(stream_args);
s->rx_stream = s->usrp->get_rx_stream(stream_args);
uhd::stream_args_t stream_args_rx("sc16", "sc16");
uhd::stream_args_t stream_args_tx("sc16", "sc16");
for (i = 0; i< openair0_cfg[0].rx_num_channels(); i++)
stream_args_rx.channels.push_back(i);
for (i = 0; i< openair0_cfg[0].tx_num_channels(); i++)
stream_args_tx.channels.push_back(i);
s->tx_stream = s->usrp->get_tx_stream(stream_args_tx);
s->rx_stream = s->usrp->get_rx_stream(stream_args_rx);
s->usrp->set_time_now(uhd::time_spec_t(0.0));
......
targets/RT/USER/lte-softmodem.c
View file @ e67c9df2
......@@ -129,7 +129,7 @@ unsigned short config_frames[4] = {2,9,11,13};
#define FRAME_PERIOD 100000000ULL
#define DAQ_PERIOD 66667ULL
//#define DEBUG_THREADS 1
#define DEBUG_THREADS 1
//#define USRP_DEBUG 1
......@@ -150,8 +150,8 @@ void cleanup_rx_pdsch_thread(void);
openair0_config_t openair0_cfg[MAX_CARDS];
int32_t *rxdata;
int32_t *txdata;
int32_t **rxdata;
int32_t **txdata;
int setup_ue_buffers(PHY_VARS_UE **phy_vars_ue, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs]);
int setup_eNB_buffers(PHY_VARS_eNB **phy_vars_eNB, openair0_config_t *openair0_cfg, openair0_rf_map rf_map[MAX_NUM_CCs]);
......@@ -1277,6 +1277,8 @@ static void *eNB_thread(void *arg)
unsigned int rx_cnt = 0;
unsigned int tx_cnt = tx_delay;
// int tx_offset;
void *rxp[2],*txp[2];
int i;
hw_subframe = 0;
#endif
......@@ -1400,50 +1402,42 @@ static void *eNB_thread(void *arg)
unsigned int rxs;
#ifndef USRP_DEBUG
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ,1);
/*
// Grab 1/4 of RX buffer and get timestamp
rxs = openair0.trx_read_func(&openair0,
&timestamp,
&rxdata[rx_cnt*samples_per_packets],
(samples_per_packets>>2));
if (rxs != (samples_per_packets>>2))
oai_exit=1;
*/
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_TXCNT,tx_cnt);
vcd_signal_dumper_dump_variable_by_name(VCD_SIGNAL_DUMPER_VARIABLES_RXCNT,rx_cnt*samples_per_packets);
printf("hw_subframe %d: rx_cnt %d\n",hw_subframe,rx_cnt);
for (i=0;i<PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_rx;i++)
rxp[i] = (void*)&rxdata[i][rx_cnt*samples_per_packets];
rxs = openair0.trx_read_func(&openair0,
&timestamp,
&rxdata[rx_cnt*samples_per_packets],
samples_per_packets);
rxp,
samples_per_packets,
PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_rx);
if (rxs != samples_per_packets)
oai_exit=1;
printf("hw_subframe %d: tx_cnt %d\n",hw_subframe,tx_cnt);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ,0);
// Transmit TX buffer based on timestamp from RX
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE,1);
for (i=0;i<PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_tx;i++)
txp[i] = (void*)&txdata[i][tx_cnt*samples_per_packets];
openair0.trx_write_func(&openair0,
(timestamp+samples_per_packets*tx_delay-tx_forward_nsamps),
&txdata[tx_cnt*samples_per_packets],
txp,
samples_per_packets,
PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_tx,
1);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE,0);
/*
// Grab remaining 3/4 of RX buffer
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ,1);
rxs = openair0.trx_read_func(&openair0,
&timestamp,
&rxdata[(rx_cnt*samples_per_packets)+(samples_per_packets>>2)],
3*((samples_per_packets>>2)));
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ,0);
if (rxs != (3*(samples_per_packets>>2)))
oai_exit=1;
*/
#else
rt_sleep_ns(1000000);
#endif
......@@ -1891,15 +1885,17 @@ static void *UE_thread(void *arg) {
int slot=1,frame=0,hw_slot,last_slot, next_slot,hw_subframe=0,rx_cnt=0,tx_cnt=0;
// unsigned int aa;
int dummy[samples_per_packets];
int dummy[2][samples_per_packets];
int dummy_dump = 0;
int tx_enabled=0;
int start_rx_stream=0;
int rx_off_diff = 0;
int rx_correction_timer = 0;
int i;
openair0_timestamp time0,time1;
unsigned int rxs;
void *rxp[2],*txp[2];
printf("waiting for USRP sync (UE_thread)\n");
#ifdef RTAI
......@@ -1926,10 +1922,14 @@ static void *UE_thread(void *arg) {
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_READ,1);
#ifndef USRP_DEBUG
for (i=0;i<PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_rx;i++)
rxp[i] = (dummy_dump==0) ? (void*)&rxdata[i][rx_cnt*samples_per_packets] : (void*)dummy[i];
rxs = openair0.trx_read_func(&openair0,
&timestamp,
(dummy_dump==0) ? &rxdata[rx_cnt*samples_per_packets] : dummy,
samples_per_packets - ((rx_cnt==0) ? rx_off_diff : 0));
rxp,
samples_per_packets - ((rx_cnt==0) ? rx_off_diff : 0),
PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_rx);
if (rxs != (samples_per_packets- ((rx_cnt==0) ? rx_off_diff : 0)))
oai_exit=1;
......@@ -1939,11 +1939,15 @@ static void *UE_thread(void *arg) {
// Transmit TX buffer based on timestamp from RX
if (tx_enabled) {
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE,1);
for (i=0;i<PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_tx;i++)
txp[i] = (void*)&txdata[i][tx_cnt*samples_per_packets];
openair0.trx_write_func(&openair0,
(timestamp+samples_per_packets*tx_delay-tx_forward_nsamps),
&txdata[tx_cnt*samples_per_packets],
txp,
samples_per_packets,
PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_tx,
1);
vcd_signal_dumper_dump_function_by_name(VCD_SIGNAL_DUMPER_FUNCTIONS_TRX_WRITE,0);
}
#else
......@@ -2061,7 +2065,8 @@ static void *UE_thread(void *arg) {
rxs = openair0.trx_read_func(&openair0,
&timestamp,
&rxdata[0],
PHY_vars_UE_g[0][0]->rx_offset);
PHY_vars_UE_g[0][0]->rx_offset,
PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_rx);
#else
rt_sleep_ns(10000000);
#endif
......@@ -3037,8 +3042,8 @@ int main(int argc, char **argv) {
// since the USRP only supports one CC (for the moment), we initialize all the cards with first CC.
// in the case of EXMIMO2, these values are overwirtten in the function setup_eNB/UE_buffer
#ifndef EXMIMO
openair0_cfg[card].tx_num_channels=1;
openair0_cfg[card].rx_num_channels=1;
openair0_cfg[card].tx_num_channels=min(2,((UE_flag==0) ? PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_tx : PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_tx));
openair0_cfg[card].rx_num_channels=min(2,((UE_flag==0) ? PHY_vars_eNB_g[0][0]->lte_frame_parms.nb_antennas_rx : PHY_vars_UE_g[0][0]->lte_frame_parms.nb_antennas_rx));
for (i=0;i<4;i++) {
openair0_cfg[card].tx_gain[i] = tx_gain[0][i];
openair0_cfg[card].rx_gain[i] = ((UE_flag==0) ? PHY_vars_eNB_g[0][0]->rx_total_gain_eNB_dB :
......@@ -3323,7 +3328,7 @@ int main(int argc, char **argv) {
}
// Sleep to allow all threads to setup
//sleep(1);
sleep(1);
#ifndef EXMIMO
#ifndef USRP_DEBUG
......
targets/SIMU/USER/oaisim.c
View file @ e67c9df2
......@@ -719,7 +719,6 @@ void *l2l1_task(void *args_p) {
// PHY_vars_eNB_g[eNB_id]->frame = frame;
if ((slot&1) == 0)
phy_procedures_eNB_lte (slot>>1,PHY_vars_eNB_g[eNB_inst], abstraction_flag, no_relay, NULL);
#ifdef PRINT_STATS
if(last_slot==9 && frame%10==0)
if(eNB_avg_thr)
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment