Skip to content

O
OpenXG-RAN
Commit 7a538b09 authored by Eurecom's avatar Eurecom
Browse files
Options

testing legacy RRU

parent f7811624
Show whitespace changes
Inline Side-by-side
Showing with 80 additions and 75 deletions
targets/RT/USER/lte-ru.c
View file @ 7a538b09
......@@ -413,7 +413,7 @@ void fh_if5_north_asynch_in(RU_t *ru,
int tti_tx,frame_tx;
openair0_timestamp timestamp_tx;
recv_IF5(ru, &timestamp_tx, *subframe, IF5_RRH_GW_DL);
// printf("Received subframe %d (TS %llu) from RCC\n",tti_tx,timestamp_tx);
// LOG_I(PHY,"Received subframe %d (TS %llu) from RCC\n",tti_tx,timestamp_tx);
tti_tx = (timestamp_tx/fp->samples_per_tti)%10;
frame_tx = (timestamp_tx/(fp->samples_per_tti*10))&1023;
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_RU, proc->frame_tx );
......@@ -718,7 +718,7 @@ void rx_rf(RU_t *ru,
*subframe = proc->tti_rx;
}
//printf("timestamp_rx %lu, frame %d(%d), subframe %d(%d)\n",ru->timestamp_rx,proc->frame_rx,frame,proc->tti_rx,subframe);
//LOG_I(PHY,"timestamp_rx %lu, frame %d(%d), subframe %d(%d)\n",ru->timestamp_rx,proc->frame_rx,frame,proc->tti_rx,subframe);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME( VCD_SIGNAL_DUMPER_VARIABLES_TRX_TS, proc->timestamp_rx&0xffffffff );
if (rxs != fp->samples_per_tti) {
......@@ -1140,12 +1140,12 @@ void wakeup_L1s(RU_t *ru) {
LOG_D(PHY, "wakeup_L1s (num %d) for RU %d (%d.%d) ru->eNB_top:%p\n", ru->num_eNB, ru->idx, ru->proc.frame_rx, ru->proc.tti_rx, ru->eNB_top);
// call eNB function directly
char string[20];
sprintf(string, "Incoming RU %d", ru->idx);
LOG_I(PHY,string, "Incoming RU %d", ru->idx);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_WAKEUP_L1S_RU+ru->idx, ru->proc.frame_rx);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_WAKEUP_L1S_RU+ru->idx, ru->proc.tti_rx);
AssertFatal(0==pthread_mutex_lock(&proc->mutex_RU),"");
VCD_SIGNAL_DUMPER_DUMP_FUNCTION_BY_NAME(VCD_SIGNAL_DUMPER_FUNCTIONS_LOCK_MUTEX_RU+ru->idx, 1);
//printf("wakeup_L1s: Frame %d, Subframe %d: RU %d done (wait_cnt %d),RU_mask[%d] %x\n",
//LOG_I(PHY,"wakeup_L1s: Frame %d, Subframe %d: RU %d done (wait_cnt %d),RU_mask[%d] %x\n",
// ru->proc.frame_rx,ru->proc.tti_rx,ru->idx,ru->wait_cnt,ru->proc.tti_rx,proc->RU_mask[ru->proc.tti_rx]);
//VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_WAKEUP_L1S_RU+ru->idx, ru->proc.frame_rx);
//VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_WAKEUP_L1S_RU+ru->idx, ru->proc.tti_rx);
......@@ -1171,7 +1171,7 @@ void wakeup_L1s(RU_t *ru) {
proc->RU_mask[ru->proc.tti_rx] |= (1<<i);
}
//printf("RU %d, RU_mask[%d] %d, i %d, frame %d, slave %d, ru->cnt %d, i->cnt %d\n",ru->idx,ru->proc.tti_rx,proc->RU_mask[ru->proc.tti_rx],i,ru->proc.frame_rx,ru->is_slave,ru->wait_cnt,eNB->RU_list[i]->wait_cnt);
//LOG_I(PHY,"RU %d, RU_mask[%d] %d, i %d, frame %d, slave %d, ru->cnt %d, i->cnt %d\n",ru->idx,ru->proc.tti_rx,proc->RU_mask[ru->proc.tti_rx],i,ru->proc.frame_rx,ru->is_slave,ru->wait_cnt,eNB->RU_list[i]->wait_cnt);
VCD_SIGNAL_DUMPER_DUMP_VARIABLE_BY_NAME(VCD_SIGNAL_DUMPER_VARIABLES_MASK_RU, proc->RU_mask[ru->proc.tti_rx]);
if (ru->is_slave == 0 && ( (proc->RU_mask[ru->proc.tti_rx]&(1<<i)) == 1 ) && eNB->RU_list[i]->state == RU_RUN) { //This is master & the RRU has already been received
......@@ -1303,7 +1303,7 @@ void fill_rf_config(RU_t *ru,
char *rf_config_file) {
LTE_DL_FRAME_PARMS *fp = ru->frame_parms;
openair0_config_t *cfg = &ru->openair0_cfg;
//printf("////////////////numerology in config = %d\n",numerology);
//LOG_I(PHY,"////////////////numerology in config = %d\n",numerology);
int numerology = get_softmodem_params()->numerology;
if(fp->N_RB_DL == 100) {
......@@ -1330,7 +1330,7 @@ void fill_rf_config(RU_t *ru,
cfg->tx_bw = 40e6;
cfg->rx_bw = 40e6;
} else {
printf("Wrong input for numerology %d\n setting to 20MHz normal CP configuration",numerology);
LOG_I(PHY,"Wrong input for numerology %d\n setting to 20MHz normal CP configuration",numerology);
cfg->sample_rate=30.72e6;
cfg->samples_per_frame = 307200;
cfg->tx_bw = 10e6;
......@@ -1369,7 +1369,7 @@ void fill_rf_config(RU_t *ru,
cfg->tx_gain[i] = (double)ru->att_tx;
cfg->rx_gain[i] = ru->max_rxgain-(double)ru->att_rx;
cfg->configFilename = rf_config_file;
printf("channel %d, Setting tx_gain offset %f, rx_gain offset %f, tx_freq %f, rx_freq %f\n",
LOG_I(PHY,"channel %d, Setting tx_gain offset %f, rx_gain offset %f, tx_freq %f, rx_freq %f\n",
i, cfg->tx_gain[i],
cfg->rx_gain[i],
cfg->tx_freq[i],
......@@ -1390,9 +1390,9 @@ int setup_RU_buffers(RU_t *ru) {
if (ru) {
frame_parms = ru->frame_parms;
printf("setup_RU_buffers: frame_parms = %p\n",frame_parms);
LOG_I(PHY,"setup_RU_buffers: frame_parms = %p\n",frame_parms);
} else {
printf("RU not initialized (NULL pointer)\n");
LOG_I(PHY,"RU not initialized (NULL pointer)\n");
return(-1);
}
......@@ -1415,7 +1415,7 @@ int setup_RU_buffers(RU_t *ru) {
ru->sf_extension /= 4;
ru->end_of_burst_delay /= 4;
} else {
printf("not handled, todo\n");
LOG_I(PHY,"not handled, todo\n");
exit(1);
}
} else {
......@@ -1429,13 +1429,13 @@ int setup_RU_buffers(RU_t *ru) {
for (i=0; i<ru->nb_rx; i++) {
card = i/4;
ant = i%4;
printf("Mapping RU id %d, rx_ant %d, on card %d, chain %d\n",ru->idx,i,ru->rf_map.card+card, ru->rf_map.chain+ant);
LOG_I(PHY,"Mapping RU id %d, rx_ant %d, on card %d, chain %d\n",ru->idx,i,ru->rf_map.card+card, ru->rf_map.chain+ant);
free(ru->common.rxdata[i]);
ru->common.rxdata[i] = ru->openair0_cfg.rxbase[ru->rf_map.chain+ant];
printf("rxdata[%d] @ %p\n",i,ru->common.rxdata[i]);
LOG_I(PHY,"rxdata[%d] @ %p\n",i,ru->common.rxdata[i]);
for (j=0; j<16; j++) {
printf("rxbuffer %d: %x\n",j,ru->common.rxdata[i][j]);
LOG_I(PHY,"rxbuffer %d: %x\n",j,ru->common.rxdata[i][j]);
ru->common.rxdata[i][j] = 16-j;
}
}
......@@ -1443,13 +1443,13 @@ int setup_RU_buffers(RU_t *ru) {
for (i=0; i<ru->nb_tx; i++) {
card = i/4;
ant = i%4;
printf("Mapping RU id %d, tx_ant %d, on card %d, chain %d\n",ru->idx,i,ru->rf_map.card+card, ru->rf_map.chain+ant);
LOG_I(PHY,"Mapping RU id %d, tx_ant %d, on card %d, chain %d\n",ru->idx,i,ru->rf_map.card+card, ru->rf_map.chain+ant);
free(ru->common.txdata[i]);
ru->common.txdata[i] = ru->openair0_cfg.txbase[ru->rf_map.chain+ant];
printf("txdata[%d] @ %p\n",i,ru->common.txdata[i]);
LOG_I(PHY,"txdata[%d] @ %p\n",i,ru->common.txdata[i]);
for (j=0; j<16; j++) {
printf("txbuffer %d: %x\n",j,ru->common.txdata[i][j]);
LOG_I(PHY,"txbuffer %d: %x\n",j,ru->common.txdata[i][j]);
ru->common.txdata[i][j] = 16-j;
}
}
......@@ -1541,12 +1541,12 @@ static void *ru_thread_tx( void *param ) {
} else {
for (int i=0; i<ru->nb_tx; i++) {
if(proc->frame_tx == 2) {
sprintf(filename,"txdataF%d_frame%d_sf%d.m",i,proc->frame_tx,proc->tti_tx);
LOG_I(PHY,filename,"txdataF%d_frame%d_sf%d.m",i,proc->frame_tx,proc->tti_tx);
LOG_M(filename,"txdataF_frame",ru->common.txdataF_BF[i],fp->symbols_per_tti*fp->ofdm_symbol_size, 1, 1);
}
if(proc->frame_tx == 2 && proc->tti_tx==0) {
sprintf(filename,"txdata%d_frame%d.m",i,proc->frame_tx);
LOG_I(PHY,filename,"txdata%d_frame%d.m",i,proc->frame_tx);
LOG_M(filename,"txdata_frame",ru->common.txdata[i],fp->samples_per_tti*10, 1, 1);
}
}
......@@ -1576,7 +1576,7 @@ static void *ru_thread_tx( void *param ) {
}
if (eNB_proc->RU_mask_tx != (1<<eNB->num_RU)-1) { // not all RUs have provided their information so return
//printf("Not all RUs have provided their info (mask = %d), RU %d, num_RUs %d\n", eNB_proc->RU_mask_tx,ru->idx,eNB->num_RU);
//LOG_I(PHY,"Not all RUs have provided their info (mask = %d), RU %d, num_RUs %d\n", eNB_proc->RU_mask_tx,ru->idx,eNB->num_RU);
AssertFatal((ret=pthread_mutex_unlock(&eNB_proc->mutex_RU_tx))==0,"mutex_unlock returns %d\n",ret);
} else { // all RUs TX are finished so send the ready signal to eNB processing
eNB_proc->RU_mask_tx = 0;
......@@ -1597,7 +1597,7 @@ static void *ru_thread_tx( void *param ) {
}
}
//printf("ru_thread_tx: Frame %d, Subframe %d: RU %d done (wait_cnt %d),RU_mask_tx %d\n",
//LOG_I(PHY,"ru_thread_tx: Frame %d, Subframe %d: RU %d done (wait_cnt %d),RU_mask_tx %d\n",
//eNB_proc->frame_rx,eNB_proc->subframe_rx,ru->idx,ru->wait_cnt,eNB_proc->RU_mask_tx);
}
......@@ -1632,7 +1632,7 @@ static void *ru_thread( void *param ) {
phy_init_RU(ru);
if (setup_RU_buffers(ru)!=0) {
printf("Exiting, cannot initialize RU Buffers\n");
LOG_I(PHY,"Exiting, cannot initialize RU Buffers\n");
exit(-1);
}
......@@ -1656,7 +1656,7 @@ static void *ru_thread( void *param ) {
if (setup_RU_buffers(ru)!=0) {
printf("Exiting, cannot initialize RU Buffers\n");
LOG_I(PHY,"Exiting, cannot initialize RU Buffers\n");
exit(-1);
}
......@@ -1863,12 +1863,12 @@ static void *ru_thread( void *param ) {
} else {
for (int i=0; i<ru->nb_tx; i++) {
if(proc->frame_tx == 2) {
sprintf(filename,"txdataF%d_frame%d_sf%d.m",i,proc->frame_tx,proc->tti_tx);
LOG_I(PHY,filename,"txdataF%d_frame%d_sf%d.m",i,proc->frame_tx,proc->tti_tx);
LOG_M(filename,"txdataF_frame",ru->common.txdataF_BF[i],ru->frame_parms->symbols_per_tti*ru->frame_parms->ofdm_symbol_size, 1, 1);
}
if(proc->frame_tx == 2 && proc->tti_tx==0) {
sprintf(filename,"txdata%d_frame%d.m",i,proc->frame_tx);
LOG_I(PHY,filename,"txdata%d_frame%d.m",i,proc->frame_tx);
LOG_M(filename,"txdata_frame",ru->common.txdata[i],ru->frame_parms->samples_per_tti*10, 1, 1);
}
}
......@@ -1892,7 +1892,7 @@ static void *ru_thread( void *param ) {
} // ru->state = RU_RUN
} // while !oai_exit
printf( "Exiting ru_thread \n");
LOG_I(PHY, "Exiting ru_thread \n");
if (!(get_softmodem_params()->emulate_rf)) {
if (ru->stop_rf != NULL) {
......@@ -2484,8 +2484,6 @@ void init_precoding_weights(PHY_VARS_eNB *eNB) {
void set_function_spec_param(RU_t *ru) {
int ret;
fill_rf_config(ru,ru->rf_config_file);
init_frame_parms(ru->frame_parms,1);
switch (ru->if_south) {
case LOCAL_RF: // this is an RU with integrated RF (RRU, eNB)
......@@ -2507,10 +2505,10 @@ void set_function_spec_param(RU_t *ru) {
reset_meas(&ru->compression);
reset_meas(&ru->transport);
ret = openair0_transport_load(&ru->ifdevice,&ru->openair0_cfg,&ru->eth_params);
printf("openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
LOG_I(PHY,"NGFI_RRU_IF5: openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
LOG_I(PHY,"Exiting, cannot initialize transport protocol\n");
exit(-1);
}
} else if (ru->function == NGFI_RRU_IF4p5) {
......@@ -2531,10 +2529,10 @@ void set_function_spec_param(RU_t *ru) {
reset_meas(&ru->compression);
reset_meas(&ru->transport);
ret = openair0_transport_load(&ru->ifdevice,&ru->openair0_cfg,&ru->eth_params);
printf("openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
LOG_I(PHY,"NGFI_RRU_if4p5 : openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
LOG_I(PHY,"Exiting, cannot initialize transport protocol\n");
exit(-1);
}
......@@ -2554,7 +2552,7 @@ void set_function_spec_param(RU_t *ru) {
ru->fh_south_out = tx_rf; // local synchronous RF TX
ru->start_rf = start_rf; // need to start the local RF interface
ru->stop_rf = stop_rf;
printf("configuring ru_id %d (start_rf %p)\n", ru->idx, start_rf);
LOG_I(PHY,"NFGI_RRU_IF4p5: configuring ru_id %d (start_rf %p)\n", ru->idx, start_rf);
/*
if (ru->function == eNodeB_3GPP) { // configure RF parameters only for 3GPP eNodeB, we need to get them from RAU otherwise
fill_rf_config(ru,rf_config_file);
......@@ -2564,7 +2562,7 @@ void set_function_spec_param(RU_t *ru) {
ret = openair0_device_load(&ru->rfdevice,&ru->openair0_cfg);
if (setup_RU_buffers(ru)!=0) {
printf("Exiting, cannot initialize RU Buffers\n");
LOG_I(PHY,"Exiting, cannot initialize RU Buffers\n");
exit(-1);
}*/
break;
......@@ -2589,10 +2587,10 @@ void set_function_spec_param(RU_t *ru) {
ru->ifdevice.eth_params = &ru->eth_params;
ru->ifdevice.configure_rru = configure_ru;
ret = openair0_transport_load(&ru->ifdevice,&ru->openair0_cfg,&ru->eth_params);
printf("openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
LOG_I(PHY,"REMOTE_IF5: openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
LOG_I(PHY,"Exiting, cannot initialize transport protocol\n");
exit(-1);
}
......@@ -2615,10 +2613,10 @@ void set_function_spec_param(RU_t *ru) {
ru->ifdevice.eth_params = &ru->eth_params;
ru->ifdevice.configure_rru = configure_ru;
ret = openair0_transport_load(&ru->ifdevice, &ru->openair0_cfg, &ru->eth_params);
printf("openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
LOG_I(PHY,"REMOTE IF4p5: openair0_transport_init returns %d for ru_id %d\n", ret, ru->idx);
if (ret<0) {
printf("Exiting, cannot initialize transport protocol\n");
LOG_I(PHY,"Exiting, cannot initialize transport protocol\n");
exit(-1);
}
......@@ -2639,6 +2637,7 @@ void set_function_spec_param(RU_t *ru) {
LOG_E(PHY,"RU with invalid or unknown southbound interface type %d\n",ru->if_south);
break;
} // switch on interface type
}
//extern void RCconfig_RU(void);
......@@ -2728,6 +2727,11 @@ void init_RU(char *rf_config_file, int send_dmrssync) {
LOG_I(PHY, "Initializing RRU descriptor %d : (%s,%s,%d)\n", ru_id, ru_if_types[ru->if_south], NB_timing[ru->if_timing], ru->function);
set_function_spec_param(ru);
if (ru->function != NGFI_RRU_IF4p5 && ru->function != NGFI_RRU_IF5) {
fill_rf_config(ru,ru->rf_config_file);
init_frame_parms(ru->frame_parms,1);
}
LOG_I(PHY, "Starting ru_thread %d, is_slave %d, send_dmrs %d\n", ru_id, ru->is_slave, ru->generate_dmrs_sync);
init_RU_proc(ru);
} // for ru_id
......@@ -2741,7 +2745,7 @@ void stop_ru(RU_t *ru) {
#if defined(PRE_SCD_THREAD) || defined(PHY_TX_THREAD)
int *status;
#endif
printf("Stopping RU %p processing threads\n",(void *)ru);
LOG_I(PHY,"Stopping RU %p processing threads\n",(void *)ru);
#if defined(PRE_SCD_THREAD)
if(ru) {
......@@ -2795,7 +2799,7 @@ void init_ru_vnf(void) {
pthread_mutex_init(&RC.ru_mutex,NULL);
pthread_cond_init(&RC.ru_cond,NULL);
// read in configuration file)
printf("configuring RU from file\n");
LOG_I(PHY,"configuring RU from file\n");
RCconfig_RU();
LOG_I(PHY,"number of L1 instances %d, number of RU %d, number of CPU cores %d\n",RC.nb_L1_inst,RC.nb_RU,get_nprocs());
......@@ -2885,7 +2889,7 @@ void RCconfig_RU(void) {
RC.ru[j] = (RU_t *)malloc(sizeof(RU_t));
memset((void *)RC.ru[j],0,sizeof(RU_t));
RC.ru[j]->idx = j;
printf("Creating RC.ru[%d]:%p\n", j, RC.ru[j]);
LOG_I(PHY,"Creating RC.ru[%d]:%p\n", j, RC.ru[j]);
RC.ru[j]->if_timing = synch_to_ext_device;
if (RC.nb_L1_inst >0)
......@@ -2942,7 +2946,7 @@ void RCconfig_RU(void) {
RC.ru[j]->if_south = LOCAL_RF;
RC.ru[j]->function = eNodeB_3GPP;
RC.ru[j]->state = RU_RUN;
printf("Setting function for RU %d to eNodeB_3GPP\n",j);
LOG_I(PHY,"Setting function for RU %d to eNodeB_3GPP\n",j);
} else {
RC.ru[j]->eth_params.local_if_name = strdup(*(RUParamList.paramarray[j][RU_LOCAL_IF_NAME_IDX].strptr));
RC.ru[j]->eth_params.my_addr = strdup(*(RUParamList.paramarray[j][RU_LOCAL_ADDRESS_IDX].strptr));
......@@ -2952,43 +2956,43 @@ void RCconfig_RU(void) {
// Check if control port set
if (!(config_isparamset(RUParamList.paramarray[j],RU_REMOTE_PORTC_IDX)) ) {
printf("Removing control port for RU %d\n",j);
LOG_I(PHY,"Removing control port for RU %d\n",j);
RC.ru[j]->has_ctrl_prt = 0;
} else {
RC.ru[j]->eth_params.my_portc = *(RUParamList.paramarray[j][RU_LOCAL_PORTC_IDX].uptr);
RC.ru[j]->eth_params.remote_portc = *(RUParamList.paramarray[j][RU_REMOTE_PORTC_IDX].uptr);
printf(" Control port %u \n",RC.ru[j]->eth_params.my_portc);
LOG_I(PHY," Control port %u \n",RC.ru[j]->eth_params.my_portc);
}
if (strcmp(*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr), "udp") == 0) {
RC.ru[j]->if_south = LOCAL_RF;
RC.ru[j]->function = NGFI_RRU_IF5;
RC.ru[j]->eth_params.transp_preference = ETH_UDP_MODE;
printf("Setting function for RU %d to NGFI_RRU_IF5 (udp)\n",j);
LOG_I(PHY,"Setting function for RU %d to NGFI_RRU_IF5 (udp)\n",j);
} else if (strcmp(*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr), "raw") == 0) {
RC.ru[j]->if_south = LOCAL_RF;
RC.ru[j]->function = NGFI_RRU_IF5;
RC.ru[j]->eth_params.transp_preference = ETH_RAW_MODE;
printf("Setting function for RU %d to NGFI_RRU_IF5 (raw)\n",j);
LOG_I(PHY,"Setting function for RU %d to NGFI_RRU_IF5 (raw)\n",j);
} else if (strcmp(*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr), "udp_if4p5") == 0) {
RC.ru[j]->if_south = LOCAL_RF;
RC.ru[j]->function = NGFI_RRU_IF4p5;
RC.ru[j]->eth_params.transp_preference = ETH_UDP_IF4p5_MODE;
RC.ru[j]->has_ctrl_prt =1;
printf("Setting function for RU %d to NGFI_RRU_IF4p5 (udp)\n",j);
LOG_I(PHY,"Setting function for RU %d to NGFI_RRU_IF4p5 (udp)\n",j);
} else if (strcmp(*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr), "raw_if4p5") == 0) {
RC.ru[j]->if_south = LOCAL_RF;
RC.ru[j]->function = NGFI_RRU_IF4p5;
RC.ru[j]->eth_params.transp_preference = ETH_RAW_IF4p5_MODE;
printf("Setting function for RU %d to NGFI_RRU_IF4p5 (raw)\n",j);
LOG_I(PHY,"Setting function for RU %d to NGFI_RRU_IF4p5 (raw)\n",j);
}
printf("RU %d is_slave=%s\n",j,*(RUParamList.paramarray[j][RU_IS_SLAVE_IDX].strptr));
LOG_I(PHY,"RU %d is_slave=%s\n",j,*(RUParamList.paramarray[j][RU_IS_SLAVE_IDX].strptr));
if (strcmp(*(RUParamList.paramarray[j][RU_IS_SLAVE_IDX].strptr), "yes") == 0) RC.ru[j]->is_slave=1;
else RC.ru[j]->is_slave=0;
printf("RU %d ota_sync_enabled=%s\n",j,*(RUParamList.paramarray[j][RU_OTA_SYNC_ENABLE_IDX].strptr));
LOG_I(PHY,"RU %d ota_sync_enabled=%s\n",j,*(RUParamList.paramarray[j][RU_OTA_SYNC_ENABLE_IDX].strptr));
if (strcmp(*(RUParamList.paramarray[j][RU_OTA_SYNC_ENABLE_IDX].strptr), "yes") == 0) RC.ru[j]->ota_sync_enable=1;
else RC.ru[j]->ota_sync_enable=0;
......@@ -3002,8 +3006,8 @@ void RCconfig_RU(void) {
for (i=0; i<RC.ru[j]->num_bands; i++) RC.ru[j]->band[i] = RUParamList.paramarray[j][RU_BAND_LIST_IDX].iptr[i];
} //strcmp(local_rf, "yes") == 0
else {
printf("RU %d: Transport %s\n",j,*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr));
else {
LOG_I(PHY,"RU %d: Transport %s\n",j,*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr));
RC.ru[j]->eth_params.local_if_name = strdup(*(RUParamList.paramarray[j][RU_LOCAL_IF_NAME_IDX].strptr));
RC.ru[j]->eth_params.my_addr = strdup(*(RUParamList.paramarray[j][RU_LOCAL_ADDRESS_IDX].strptr));
RC.ru[j]->eth_params.remote_addr = strdup(*(RUParamList.paramarray[j][RU_REMOTE_ADDRESS_IDX].strptr));
......@@ -3011,7 +3015,7 @@ void RCconfig_RU(void) {
RC.ru[j]->eth_params.remote_portc = *(RUParamList.paramarray[j][RU_REMOTE_PORTC_IDX].uptr);
RC.ru[j]->eth_params.my_portd = *(RUParamList.paramarray[j][RU_LOCAL_PORTD_IDX].uptr);
RC.ru[j]->eth_params.remote_portd = *(RUParamList.paramarray[j][RU_REMOTE_PORTD_IDX].uptr);
}
if (strcmp(*(RUParamList.paramarray[j][RU_TRANSPORT_PREFERENCE_IDX].strptr), "udp") == 0) {
RC.ru[j]->if_south = REMOTE_IF5;
RC.ru[j]->function = NGFI_RAU_IF5;
......@@ -3035,6 +3039,7 @@ void RCconfig_RU(void) {
if (strcmp(*(RUParamList.paramarray[j][RU_IS_SLAVE_IDX].strptr), "yes") == 0) RC.ru[j]->is_slave=1;
else RC.ru[j]->is_slave=0;
}
} /* strcmp(local_rf, "yes") != 0 */
RC.ru[j]->nb_tx = *(RUParamList.paramarray[j][RU_NB_TX_IDX].uptr);
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment