Skip to content

O
OpenXG-RAN
Commit 92442cec authored by laurent's avatar laurent
Browse files
Options

progress in main cleanup coding

parent 217491cb
Show whitespace changes
Inline Side-by-side
Showing with 51 additions and 72 deletions
executables/main-ocp.c
View file @ 92442cec
......@@ -15,6 +15,7 @@ static int DEFENBS[] = {0};
#include <openair1/SCHED/fapi_l1.h>
#include <openair1/PHY/INIT/phy_init.h>
#include <openair2/LAYER2/MAC/mac_extern.h>
#include <openair1/PHY/LTE_REFSIG/lte_refsig.h>
extern uint16_t sf_ahead;
extern void oai_subframe_ind(uint16_t sfn, uint16_t sf);
extern void fep_full(RU_t *ru);
......@@ -89,10 +90,6 @@ void init_RU_proc(RU_t *ru) {
proc->frame_tx_unwrap = 0;
for (i=0; i<10; i++) proc->symbol_mask[i]=0;
pthread_mutex_init( &proc->mutex_synch,NULL);
pthread_cond_init( &proc->cond_synch,NULL);
pthread_cond_init( &proc->cond_eNBs, NULL);
pthread_t t;
threadCreate(&t, ru_thread, (void *)ru, "MainRu", -1, OAI_PRIORITY_RT_MAX);
}
......@@ -166,6 +163,7 @@ void init_eNB_afterRU(void) {
eNB = RC.eNB[inst][CC_id];
phy_init_lte_eNB(eNB,0,0);
eNB->frame_parms.nb_antennas_rx = 0;
eNB->frame_parms.nb_antennas_tx = 0;
eNB->prach_vars.rxsigF[0] = (int16_t **)malloc16(64*sizeof(int16_t *));
for (int ce_level=0; ce_level<4; ce_level++) {
......@@ -175,6 +173,7 @@ void init_eNB_afterRU(void) {
for (ru_id=0,aa=0; ru_id<eNB->num_RU; ru_id++) {
eNB->frame_parms.nb_antennas_rx += eNB->RU_list[ru_id]->nb_rx;
eNB->frame_parms.nb_antennas_tx += eNB->RU_list[ru_id]->nb_tx;
AssertFatal(eNB->RU_list[ru_id]->common.rxdataF!=NULL,
"RU %d : common.rxdataF is NULL\n",
eNB->RU_list[ru_id]->idx);
......@@ -197,22 +196,9 @@ void init_eNB_afterRU(void) {
* In monolithic mode, we come here with nb_antennas_rx == 0
* (not tested in other modes).
*/
if (eNB->frame_parms.nb_antennas_rx < 1) {
LOG_I(PHY, "%s() ************* DJP ***** eNB->frame_parms.nb_antennas_rx:%d - GOING TO HARD CODE TO 1", __FUNCTION__, eNB->frame_parms.nb_antennas_rx);
eNB->frame_parms.nb_antennas_rx = 1;
} else {
//LOG_I(PHY," Delete code\n");
}
AssertFatal( eNB->frame_parms.nb_antennas_rx > 0 && eNB->frame_parms.nb_antennas_rx < 4, "");
AssertFatal( eNB->frame_parms.nb_antennas_tx > 0 && eNB->frame_parms.nb_antennas_rx < 4, "");
if (eNB->frame_parms.nb_antennas_tx < 1) {
LOG_I(PHY, "%s() ************* DJP ***** eNB->frame_parms.nb_antennas_tx:%d - GOING TO HARD CODE TO 1", __FUNCTION__, eNB->frame_parms.nb_antennas_tx);
eNB->frame_parms.nb_antennas_tx = 1;
} else {
//LOG_I(PHY," Delete code\n");
}
AssertFatal(eNB->frame_parms.nb_antennas_rx >0,
"inst %d, CC_id %d : nb_antennas_rx %d\n",inst,CC_id,eNB->frame_parms.nb_antennas_rx);
LOG_I(PHY,"inst %d, CC_id %d : nb_antennas_rx %d\n",inst,CC_id,eNB->frame_parms.nb_antennas_rx);
init_transport(eNB);
//init_precoding_weights(RC.eNB[inst][CC_id]);
......@@ -261,6 +247,7 @@ void stop_eNB(int nb_inst) {
kill_eNB_proc(inst);
}
}
// this is for RU with local RF unit
void fill_rf_config(RU_t *ru, char *rf_config_file) {
int i;
......@@ -768,7 +755,7 @@ int stop_rf(RU_t *ru) {
void set_function_spec_param(RU_t *ru) {
switch (ru->if_south) {
case LOCAL_RF: { // this is an RU with integrated RF (RRU, eNB)
case LOCAL_RF: // this is an RU with integrated RF (RRU, eNB)
ru->do_prach = 0; // no prach processing in RU
ru->feprx = fep_full;
ru->feptx_ofdm = feptx_ofdm;
......@@ -776,26 +763,11 @@ void set_function_spec_param(RU_t *ru) {
ru->fh_north_in = NULL; // no incoming fronthaul from north
ru->start_if = NULL; // no if interface
ru->rfdevice.host_type = RAU_HOST;
}
ru->fh_south_in = rx_rf; // local synchronous RF RX
ru->fh_south_out = tx_rf; // local synchronous RF TX
ru->start_rf = start_rf; // need to start the local RF interface
ru->stop_rf = stop_rf;
ru->eNB_top=eNB_top;
printf("configuring ru_id %d (start_rf %p)\n", ru->idx, start_rf);
/*
if (ru->function == eNodeB_3GPP) { // configure RF parameters only for 3GPP eNodeB, we need to get them from RAU otherwise
fill_rf_config(ru,rf_config_file);
init_frame_parms(&ru->frame_parms,1);
phy_init_RU(ru);
}
ret = openair0_device_load(&ru->rfdevice,&ru->openair0_cfg);
if (setup_RU_buffers(ru)!=0) {
printf("Exiting, cannot initialize RU Buffers\n");
exit(-1);
}*/
break;
default:
......
targets/RT/USER/lte-softmodem.c
View file @ 92442cec
......@@ -91,7 +91,6 @@ unsigned short config_frames[4] = {2,9,11,13};
#include "system.h"
#include "lte-softmodem.h"
#include "NB_IoT_interface.h"
......@@ -163,7 +162,6 @@ extern void print_opp_meas(void);
extern void init_eNB_afterRU(void);
extern void phy_free_RU(RU_t *);
int transmission_mode=1;
int emulate_rf = 0;
......@@ -296,11 +294,11 @@ static void get_options(void) {
/* Read RC configuration file */
RCConfig();
NB_eNB_INST = RC.nb_inst;
LOG_I(ENB_APP,"Configuration: nb_rrc_inst %d, nb_L1_inst %d, nb_ru %d\n",NB_eNB_INST,RC.nb_L1_inst,RC.nb_RU);
printf("Configuration: nb_rrc_inst %d, nb_L1_inst %d, nb_ru %d\n",NB_eNB_INST,RC.nb_L1_inst,RC.nb_RU);
if (!IS_SOFTMODEM_NONBIOT) {
load_NB_IoT();
LOG_I(ENB_APP," nb_nbiot_rrc_inst %d, nb_nbiot_L1_inst %d, nb_nbiot_macrlc_inst %d\n",
printf(" nb_nbiot_rrc_inst %d, nb_nbiot_L1_inst %d, nb_nbiot_macrlc_inst %d\n",
RC.nb_nb_iot_rrc_inst, RC.nb_nb_iot_L1_inst, RC.nb_nb_iot_macrlc_inst);
} else {
printf("All Nb-IoT instances disabled\n");
......@@ -532,24 +530,10 @@ int main( int argc, char **argv ) {
}
mode = normal_txrx;
set_latency_target();
logInit();
printf("Reading in command-line options\n");
get_options ();
AssertFatal(!CONFIG_ISFLAGSET(CONFIG_ABORT),"Getting configuration failed\n");
configure_linux();
// to make a graceful exit when ctrl-c is pressed
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
signal(SIGABRT, signal_handler);
cpuf=get_cpu_freq_GHz();
#ifndef PACKAGE_VERSION
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
LOG_I(HW, "OAI Version: %s\n", PACKAGE_VERSION);
if (is_nos1exec(argv[0]) )
set_softmodem_optmask(SOFTMODEM_NOS1_BIT);
......@@ -572,10 +556,30 @@ int main( int argc, char **argv ) {
reset_opp_meas();
}
cpuf=get_cpu_freq_GHz();
printf("ITTI init, useMME: %i\n",EPC_MODE_ENABLED);
itti_init(TASK_MAX, THREAD_MAX, MESSAGES_ID_MAX, tasks_info, messages_info);
// allows to forward in wireshark L2 protocol for decoding
// initialize mscgen log after ITTI
if (get_softmodem_params()->start_msc) {
load_module_shlib("msc",NULL,0,&msc_interface);
}
MSC_INIT(MSC_E_UTRAN, THREAD_MAX+TASK_MAX);
init_opt();
signal(SIGSEGV, signal_handler);
signal(SIGINT, signal_handler);
signal(SIGTERM, signal_handler);
signal(SIGABRT, signal_handler);
check_clock();
#ifndef PACKAGE_VERSION
# define PACKAGE_VERSION "UNKNOWN-EXPERIMENTAL"
#endif
LOG_I(HW, "Version: %s\n", PACKAGE_VERSION);
printf("Runtime table\n");
fill_modeled_runtime_table(runtime_phy_rx,runtime_phy_tx);
/* Read configuration */
if (RC.nb_inst > 0) {
read_config_and_init();
......@@ -596,7 +600,9 @@ int main( int argc, char **argv ) {
}
for (int enb_id = 0; enb_id < RC.nb_inst; enb_id++) {
openair_rrc_eNB_configuration(enb_id, &RC.rrc[enb_id]->configuration);
MessageDef *msg_p = itti_alloc_new_message (TASK_ENB_APP, RRC_CONFIGURATION_REQ);
RRC_CONFIGURATION_REQ(msg_p) = RC.rrc[enb_id]->configuration;
itti_send_msg_to_task (TASK_RRC_ENB, ENB_MODULE_ID_TO_INSTANCE(enb_id), msg_p);
}
} else {
printf("RC.nb_inst = 0, Initializing L1\n");
......@@ -619,6 +625,7 @@ int main( int argc, char **argv ) {
// init UE_PF_PO and mutex lock
pthread_mutex_init(&ue_pf_po_mutex, NULL);
memset (&UE_PF_PO[0][0], 0, sizeof(UE_PF_PO_t)*MAX_MOBILES_PER_ENB*MAX_NUM_CCs);
mlockall(MCL_CURRENT | MCL_FUTURE);
pthread_cond_init(&sync_cond,NULL);
pthread_mutex_init(&sync_mutex, NULL);
......@@ -648,11 +655,11 @@ int main( int argc, char **argv ) {
// for (inst=0;inst<RC.nb_L1_inst;inst++)
// for (CC_id=0;CC_id<RC.nb_L1_CC[inst];CC_id++) phy_init_lte_eNB(RC.eNB[inst][CC_id],0,0);
}
}
// no need to wait: openair_rrc_eNB_configuration() is called earlier from this thread
// openair_rrc_eNB_configuration()->init_SI()->rrc_mac_config_req_eNB ()->phy_config_request () sets the wait_eNBs() tested flag
// wait_eNBs();
// printf("About to Init RU threads RC.nb_RU:%d\n", RC.nb_RU);
printf("wait_eNBs()\n");
wait_eNBs();
printf("About to Init RU threads RC.nb_RU:%d\n", RC.nb_RU);
// RU thread and some L1 procedure aren't necessary in VNF or L2 FAPI simulator.
// but RU thread deals with pre_scd and this is necessary in VNF and simulator.
......@@ -665,7 +672,6 @@ int main( int argc, char **argv ) {
RC.ru[ru_id]->rf_map.card=0;
RC.ru[ru_id]->rf_map.chain=CC_id+(get_softmodem_params()->chain_offset);
}
}
config_sync_var=0;
......@@ -675,12 +681,13 @@ int main( int argc, char **argv ) {
printf("wait RUs\n");
// end of CI modifications
// fixme: very weird usage of bitmask
// lack of mutex in: ru_thread_prach(),...
fflush(stdout);
fflush(stderr);
// wait_RUs() is wrong and over complex!
wait_RUs();
LOG_I(ENB_APP,"RC.nb_RU:%d\n", RC.nb_RU);
// once all RUs are ready intiailize the rest of the eNBs ((dependence on final RU parameters after configuration)
printf("ALL RUs ready - init eNBs\n");
if (NFAPI_MODE!=NFAPI_MODE_PNF && NFAPI_MODE!=NFAPI_MODE_VNF) {
LOG_I(ENB_APP,"Not NFAPI mode - call init_eNB_afterRU()\n");
......@@ -700,7 +707,6 @@ int main( int argc, char **argv ) {
config_check_unknown_cmdlineopt(CONFIG_CHECKALLSECTIONS);
}
// wait for end of program
LOG_UI(ENB_APP,"TYPE <CTRL-C> TO TERMINATE\n");
// CI -- Flushing the std outputs for the previous marker to show on the eNB / DU / CU log file
fflush(stdout);
......@@ -726,6 +732,7 @@ int main( int argc, char **argv ) {
* threads have been stopped (they partially use the same memory) */
for (int inst = 0; inst < NB_eNB_INST; inst++) {
for (int cc_id = 0; cc_id < RC.nb_CC[inst]; cc_id++) {
free_transport(RC.eNB[inst][cc_id]);
phy_free_lte_eNB(RC.eNB[inst][cc_id]);
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment