adding post decoding for offload

openair1/PHY/CODING/nrLDPC_decoder/nrLDPC_decoder_offload.c

@@ -166,6 +166,8 @@ struct thread_params {
 	uint8_t iter_count;
 	double iter_average;
 	double bler;
+	struct t_nrLDPCoffload_params *p_offloadParams;	
+	int8_t* p_out;
 	rte_atomic16_t nb_dequeued;
 	rte_atomic16_t processing_status;
 	rte_atomic16_t burst_sz;
@@ -928,7 +930,6 @@ set_ldpc_dec_op(struct rte_bbdev_dec_op **ops, unsigned int n,
 		ops[i]->ldpc_dec.op_flags = RTE_BBDEV_LDPC_ITERATION_STOP_ENABLE;
 		ops[i]->ldpc_dec.code_block_mode = 1; //ldpc_dec->code_block_mode;
 		
-
 		if (hard_outputs != NULL)
 			ops[i]->ldpc_dec.hard_output =
 					hard_outputs[start_idx + i];
@@ -1240,7 +1241,7 @@ ldpc_decod_ut(struct test_op_params *op_params, int8_t* p_llr, t_nrLDPCoffload_p
 
 
 static int
-pmd_lcore_ldpc_dec(void *arg, t_nrLDPCoffload_params *p_offloadParams, int8_t* p_out)
+pmd_lcore_ldpc_dec(void *arg)
 {
 	struct thread_params *tp = arg;
 	uint16_t enq, deq;
@@ -1255,6 +1256,8 @@ pmd_lcore_ldpc_dec(void *arg, t_nrLDPCoffload_params *p_offloadParams, int8_t* p
 	int i, j, ret;
 	struct rte_bbdev_info info;
 	uint16_t num_to_enq;
+ 	int8_t *p_out = tp->p_out;	
+	t_nrLDPCoffload_params *p_offloadParams = tp->p_offloadParams;
         
 	//struct rte_bbdev_op_data *hard_output;	
        
@@ -1428,6 +1431,8 @@ start_pmd_dec(struct active_device *ad,
 	t_params[0].op_params = op_params;
 	t_params[0].queue_id = ad->queue_ids[used_cores++];
 	t_params[0].iter_count = 0;
+	t_params[0].p_out = p_out;
+	t_params[0].p_offloadParams = p_offloadParams;
 
 	RTE_LCORE_FOREACH_SLAVE(lcore_id) {
 		if (used_cores >= num_lcores)
@@ -1438,12 +1443,15 @@ start_pmd_dec(struct active_device *ad,
 		t_params[used_cores].op_params = op_params;
 		t_params[used_cores].queue_id = ad->queue_ids[used_cores];
 		t_params[used_cores].iter_count = 0;
+		t_params[used_cores].p_out = p_out; 
+		t_params[used_cores].p_offloadParams = p_offloadParams; 
+
 		rte_eal_remote_launch(pmd_lcore_ldpc_dec,
 				&t_params[used_cores++], lcore_id);
 	}
 
 	rte_atomic16_set(&op_params->sync, SYNC_START);
-	ret = pmd_lcore_ldpc_dec(&t_params[0], p_offloadParams, p_out);
+	ret = pmd_lcore_ldpc_dec(&t_params[0]);
 
 	/* Master core is always used */
 	for (used_cores = 1; used_cores < num_lcores; used_cores++)
@@ -1571,7 +1579,7 @@ int32_t nrLDPC_decod_offload(t_nrLDPC_dec_params* p_decParams, uint8_t C, uint8_
 
 	test_params.num_ops=1; 
 	test_params.burst_sz=1;
-	test_params.num_lcores=1;		
+	test_params.num_lcores=3;		
 	test_params.num_tests = 1;
   	struct active_device *ad;
         ad = &active_devs[0];
@@ -1648,8 +1656,7 @@ int32_t nrLDPC_decod_offload(t_nrLDPC_dec_params* p_decParams, uint8_t C, uint8_
 	}
 
 	create_reference_ldpc_dec_op(op_params->ref_dec_op, p_offloadParams);
-
-	ad->nb_queues =1;
+	ad->nb_queues =  1;
 	for (i = 0; i < ad->nb_queues; ++i) {
 		f_ret = fill_queue_buffers(op_params,
 			 	p_llr,	

openair1/PHY/NR_TRANSPORT/nr_ulsch_decoding.c

@@ -590,13 +590,11 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
     length_dec = (harq_process->B+24*harq_process->C)/harq_process->C;
   }
 
-
-  E = nr_get_E(G, harq_process->C, Qm, n_layers, 0);
-
   for (r=0; r<harq_process->C; r++) {
+  E = nr_get_E(G, harq_process->C, Qm, n_layers, r);
   memset(harq_process->c[r],0,Kr_bytes);
 
-  memcpy((&z_ol[0]),ulsch_llr+r*E,E*sizeof(int16_t));
+  memcpy((&z_ol[0]),ulsch_llr+r_offset,E*sizeof(short));
   
   for (i=0, j=0; j < ((kc*harq_process->Z)>>4)+1;  i+=2, j++)
   {
@@ -627,21 +625,50 @@ uint32_t nr_ulsch_decoding(PHY_VARS_gNB *phy_vars_gNB,
 #endif
     no_iteration_ldpc = ulsch->max_ldpc_iterations + 1;
   }
+
+  r_offset += E;
       	/*for (int k=0;k<8;k++)
         {
         printf("output decoder [%d] =  0x%02x \n", k, harq_process->c[r][k]);
         printf("llrprocbuf [%d] =  %x adr %p\n", k, llrProcBuf[k], llrProcBuf+k);
         }
   	*/ 
-
+	bool decodeSuccess = (no_iteration_ldpc <= ulsch->max_ldpc_iterations);
+        if (decodeSuccess) { 
 		memcpy(harq_process->b+offset,
                		harq_process->c[r],
                		Kr_bytes - (harq_process->F>>3) -((harq_process->C>1)?3:0));
         	offset += (Kr_bytes - (harq_process->F>>3) - ((harq_process->C>1)?3:0));
-
 	}
     	
+	if (r==harq_process->C-1){
+	  if (decodeSuccess) {
+		LOG_D(PHY,"[gNB %d] ULSCH: Setting ACK for slot %d TBS %d\n",
+                        phy_vars_gNB->Mod_id,harq_process->slot,harq_process->TBS);
+                harq_process->status = SCH_IDLE;
+                harq_process->round  = 0;
+                ulsch->harq_mask &= ~(1 << harq_pid);
 
+                LOG_D(PHY, "ULSCH received ok \n");
+                nr_fill_indication(phy_vars_gNB,harq_process->frame, harq_process->slot, UE_id, harq_pid, 0);
+	
+	  } else {
+		LOG_D(PHY,"[gNB %d] ULSCH: Setting NAK for SFN/SF %d/%d (pid %d, status %d, round %d, TBS %d) r %d\n",
+           	 	phy_vars_gNB->Mod_id, harq_process->frame, harq_process->slot,
+            		harq_pid,harq_process->status, harq_process->round,harq_process->TBS,r);
+      		if (harq_process->round >= ulsch->Mlimit) {
+        		harq_process->status = SCH_IDLE;
+        		harq_process->round  = 0;
+        		harq_process->handled  = 0;
+        		ulsch->harq_mask &= ~(1 << harq_pid);
+      		}
+      		harq_process->handled  = 1;
+
+      		LOG_D(PHY, "ULSCH %d in error\n",UE_id);
+		nr_fill_indication(phy_vars_gNB,harq_process->frame, harq_process->slot, UE_id, harq_pid, 1);
+	  } 
+	}
+    } 
   } 
   else { 
   void (*nr_processULSegment_ptr)(void*) = &nr_processULSegment;