Skip to content

O
OpenXG-RAN
Commit c90c6ffa authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

added new configuration file for 40 MHz band 78. Some parameters to be checked.

parent 2c108cf8
Hide whitespace changes
Inline Side-by-side
Showing with 277 additions and 6 deletions
openair1/PHY/INIT/nr_init.c
View file @ c90c6ffa
......@@ -355,6 +355,7 @@ void nr_phy_config_request_sim(PHY_VARS_gNB *gNB,
gNB_config->carrier_config.num_tx_ant.value = fp->nb_antennas_tx;
gNB_config->carrier_config.num_rx_ant.value = fp->nb_antennas_rx;
gNB_config->tdd_table.tdd_period.value = 0;
//gNB_config->subframe_config.dl_cyclic_prefix_type.value = (fp->Ncp == NORMAL) ? NFAPI_CP_NORMAL : NFAPI_CP_EXTENDED;
gNB->mac_enabled = 1;
......
openair1/SIMULATION/NR_PHY/prachsim.c
View file @ c90c6ffa
......@@ -402,8 +402,8 @@ int main(int argc, char **argv)
RC.nb_nr_L1_inst=1;
phy_init_nr_gNB(gNB,0,0);
nr_phy_init_RU(RU);
set_tdd_config_nr(frame_parms, 5000,
nr_phy_init_RU(ru);
set_tdd_config_nr(&gNB->gNB_config, 5000,
7, 6,
2, 4);
......@@ -517,8 +517,8 @@ int main(int argc, char **argv)
subframe,
0); //Nf */ //commented for testing purpose
UE_nr_rxtx_proc_t proc={0};
nr_ue_prach_procedures(UE,&proc,0,0,0);
UE_nr_rxtx_proc_t proc={0};
nr_ue_prach_procedures(UE,&proc,0,0,0);
/* tx_lev_dB not used later, no need to set */
......@@ -590,7 +590,7 @@ nr_ue_prach_procedures(UE,&proc,0,0,0);
}
}
uint16_t preamble_rx;
rx_nr_prach_ru(RU,
rx_nr_prach_ru(ru,
0,
subframe);
gNB->prach_vars.rxsigF = ru->prach_rxsigF;
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.106PRB.30kHz,usrpb2x0.conf 0 → 100644
View file @ c90c6ffa
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 1;
plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 642016;
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 3384;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0;
#initialULBWPmappingType
#0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
#this is SS=2,L=3
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0;
#this is SS=2,L=12
initialDLBWPstartSymbolAndLength_1 = 53;
initialDLBWPk0_2 = 0;
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 3384;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 3;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#0 = 839, 1 = 139
prach_RootSequenceIndex_PR = 1;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 2;
initialULBWPmappingType_0 = 1
# this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 2;
initialULBWPmappingType_1 = 1;
# this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 1;
ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 0;
nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4;
ssPBCH_BlockPower = 10;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{
GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
};
}
);
MACRLCs = (
{
num_cc = 1;
tr_s_preference = "local_L1";
tr_n_preference = "local_RRC";
}
);
L1s = (
{
num_cc = 1;
tr_n_preference = "local_mac";
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 0
att_rx = 0;
bands = [7];
max_pdschReferenceSignalPower = -27;
max_rxgain = 114;
eNB_instances = [0];
clock_src = "internal";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config :
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.273PRB.usrpn300.conf
View file @ c90c6ffa
......@@ -165,7 +165,7 @@ gNBs =
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 2;
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment