Skip to content

O
OpenXG-RAN
Commit d26aefaa authored by Melissa Elkadi's avatar Melissa Elkadi
Browse files
Options

Merge remote-tracking branch 'origin/episys/david/adding_config_files' into... 

Merge remote-tracking branch 'origin/episys/david/adding_config_files' into eurecom-episys-merge-nsa
parents a30f6791 bab9c42e
Show whitespace changes
Inline Side-by-side
Showing with 709 additions and 84 deletions
ci-scripts/conf_files/episci_nr-ue.nfapi.conf 0 → 100644
View file @ d26aefaa
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="medium";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="full";
};
L1s = (
{
num_cc = 1;
tr_n_preference = "nfapi";
local_n_if_name = "ens3";
remote_n_address = "127.0.0.1"; //Proxy IP
local_n_address = "127.0.0.1";
local_n_portc = 50600;
remote_n_portc = 50601;
local_n_portd = 50610;
remote_n_portd = 50611;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 90
att_rx = 0;
bands = [7,38,42,43];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
}
);
ci-scripts/conf_files/episci_rcc.band7.tm1.nfapi.conf 0 → 100644
View file @ d26aefaa
Active_eNBs = ( "eNB-Eurecom-LTEBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
eNBs =
(
{
////////// Identification parameters:
eNB_ID = 0xe00;
cell_type = "CELL_MACRO_ENB";
eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 5;
plmn_list = ( { mcc = 320; mnc = 230; mnc_length = 3; } );
tr_s_preference = "local_mac"
////////// Physical parameters:
component_carriers = (
{
node_function = "3GPP_eNODEB";
node_timing = "synch_to_ext_device";
node_synch_ref = 0;
frame_type = "FDD";
tdd_config = 3;
tdd_config_s = 0;
prefix_type = "NORMAL";
eutra_band = 7;
downlink_frequency = 2685000000L;
uplink_frequency_offset = -120000000;
Nid_cell = 0;
N_RB_DL = 50;
Nid_cell_mbsfn = 0;
nb_antenna_ports = 1;
nb_antennas_tx = 1;
nb_antennas_rx = 1;
tx_gain = 90;
rx_gain = 125;
pbch_repetition = "FALSE";
prach_root = 0;
prach_config_index = 0;
prach_high_speed = "DISABLE";
prach_zero_correlation = 1;
prach_freq_offset = 2;
pucch_delta_shift = 1;
pucch_nRB_CQI = 0;
pucch_nCS_AN = 0;
pucch_n1_AN = 0;
pdsch_referenceSignalPower = -27;
pdsch_p_b = 0;
pusch_n_SB = 1;
pusch_enable64QAM = "DISABLE";
pusch_hoppingMode = "interSubFrame";
pusch_hoppingOffset = 0;
pusch_groupHoppingEnabled = "ENABLE";
pusch_groupAssignment = 0;
pusch_sequenceHoppingEnabled = "DISABLE";
pusch_nDMRS1 = 1;
phich_duration = "NORMAL";
phich_resource = "ONESIXTH";
srs_enable = "DISABLE";
/* srs_BandwidthConfig =;
srs_SubframeConfig =;
srs_ackNackST =;
srs_MaxUpPts =;*/
pusch_p0_Nominal = -96;
pusch_alpha = "AL1";
pucch_p0_Nominal = -104;
msg3_delta_Preamble = 6;
pucch_deltaF_Format1 = "deltaF2";
pucch_deltaF_Format1b = "deltaF3";
pucch_deltaF_Format2 = "deltaF0";
pucch_deltaF_Format2a = "deltaF0";
pucch_deltaF_Format2b = "deltaF0";
rach_numberOfRA_Preambles = 64;
rach_preamblesGroupAConfig = "DISABLE";
/*
rach_sizeOfRA_PreamblesGroupA = ;
rach_messageSizeGroupA = ;
rach_messagePowerOffsetGroupB = ;
*/
rach_powerRampingStep = 4;
rach_preambleInitialReceivedTargetPower = -108;
rach_preambleTransMax = 10;
rach_raResponseWindowSize = 10;
rach_macContentionResolutionTimer = 48;
rach_maxHARQ_Msg3Tx = 4;
pcch_default_PagingCycle = 128;
pcch_nB = "oneT";
bcch_modificationPeriodCoeff = 2;
ue_TimersAndConstants_t300 = 1000;
ue_TimersAndConstants_t301 = 1000;
ue_TimersAndConstants_t310 = 1000;
ue_TimersAndConstants_t311 = 10000;
ue_TimersAndConstants_n310 = 20;
ue_TimersAndConstants_n311 = 1;
ue_TransmissionMode = 1;
//Parameters for SIB18
rxPool_sc_CP_Len = "normal";
rxPool_sc_Period = "sf40";
rxPool_data_CP_Len = "normal";
rxPool_ResourceConfig_prb_Num = 20;
rxPool_ResourceConfig_prb_Start = 5;
rxPool_ResourceConfig_prb_End = 44;
rxPool_ResourceConfig_offsetIndicator_present = "prSmall";
rxPool_ResourceConfig_offsetIndicator_choice = 0;
rxPool_ResourceConfig_subframeBitmap_present = "prBs40";
rxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "00000000000000000000";
rxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
rxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
/* rxPool_dataHoppingConfig_hoppingParameter = 0;
rxPool_dataHoppingConfig_numSubbands = "ns1";
rxPool_dataHoppingConfig_rbOffset = 0;
rxPool_commTxResourceUC-ReqAllowed = "TRUE";
*/
// Parameters for SIB19
discRxPool_cp_Len = "normal"
discRxPool_discPeriod = "rf32"
discRxPool_numRetx = 1;
discRxPool_numRepetition = 2;
discRxPool_ResourceConfig_prb_Num = 5;
discRxPool_ResourceConfig_prb_Start = 3;
discRxPool_ResourceConfig_prb_End = 21;
discRxPool_ResourceConfig_offsetIndicator_present = "prSmall";
discRxPool_ResourceConfig_offsetIndicator_choice = 0;
discRxPool_ResourceConfig_subframeBitmap_present = "prBs40";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_buf = "f0ffffffff";
discRxPool_ResourceConfig_subframeBitmap_choice_bs_size = 5;
discRxPool_ResourceConfig_subframeBitmap_choice_bs_bits_unused = 0;
}
);
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.61.195";
ipv6 = "192:168:30::17";
port = 36412 ;
active = "yes";
preference = "ipv4";
}
);
enable_measurement_reports = "yes";
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
NETWORK_INTERFACES :
{
ENB_INTERFACE_NAME_FOR_S1_MME = "ctrl0";
ENB_IPV4_ADDRESS_FOR_S1_MME = "172.16.0.1";
ENB_INTERFACE_NAME_FOR_S1U = "ctrl0";
ENB_IPV4_ADDRESS_FOR_S1U = "172.16.0.1";
ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "172.16.0.1";
ENB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
local_s_if_name = "lo";
remote_s_address = "127.0.0.1";
local_s_address = "127.0.0.1";
local_s_portc = 50001;
remote_s_portc = 50000;
local_s_portd = 50011;
remote_s_portd = 50010;
tr_s_preference = "nfapi";
tr_n_preference = "local_RRC";
scheduler_mode = "fairRR";
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config =
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
ci-scripts/conf_files/episci_ue.nfapi.conf 0 → 100644
View file @ d26aefaa
log_config = {
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="medium";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="full";
};
L1s = (
{
num_cc = 1;
tr_n_preference = "nfapi";
local_n_if_name = "ens3";
remote_n_address = "127.0.0.1"; //Proxy IP
local_n_address = "127.0.0.1";
local_n_portc = 50000;
remote_n_portc = 50001;
local_n_portd = 50010;
remote_n_portd = 50011;
}
);
RUs = (
{
local_rf = "yes"
nb_tx = 1
nb_rx = 1
att_tx = 90
att_rx = 0;
bands = [7,38,42,43];
max_pdschReferenceSignalPower = -27;
max_rxgain = 125;
}
);
ci-scripts/conf_files/rcc.band7.tm1.nfapi.conf
View file @ d26aefaa
...@@ -13,9 +13,9 @@ eNBs = ...@@ -13,9 +13,9 @@ eNBs =
eNB_name = "eNB-Eurecom-LTEBox"; eNB_name = "eNB-Eurecom-LTEBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values // Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 5; tracking_area_code = 1;
plmn_list = ( { mcc = 320; mnc = 230; mnc_length = 3; } ); plmn_list = ( { mcc = 208; mnc = 93; mnc_length = 2; } );
tr_s_preference = "local_mac" tr_s_preference = "local_mac"
...@@ -172,7 +172,7 @@ eNBs = ...@@ -172,7 +172,7 @@ eNBs =
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.61.195"; mme_ip_address = ( { ipv4 = "CI_MME_IP_ADDR";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
port = 36412 ; port = 36412 ;
active = "yes"; active = "yes";
...@@ -180,10 +180,10 @@ eNBs = ...@@ -180,10 +180,10 @@ eNBs =
} }
); );
enable_measurement_reports = "yes"; enable_measurement_reports = "no";
///X2 ///X2
enable_x2 = "yes"; enable_x2 = "no";
t_reloc_prep = 1000; /* unit: millisecond */ t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */ tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */ t_dc_prep = 1000; /* unit: millisecond */
...@@ -191,12 +191,12 @@ eNBs = ...@@ -191,12 +191,12 @@ eNBs =
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ {
ENB_INTERFACE_NAME_FOR_S1_MME = "ctrl0"; ENB_INTERFACE_NAME_FOR_S1_MME = "ens3";
ENB_IPV4_ADDRESS_FOR_S1_MME = "172.16.0.1"; ENB_IPV4_ADDRESS_FOR_S1_MME = "CI_ENB_IP_ADDR";
ENB_INTERFACE_NAME_FOR_S1U = "ctrl0"; ENB_INTERFACE_NAME_FOR_S1U = "ens3";
ENB_IPV4_ADDRESS_FOR_S1U = "172.16.0.1"; ENB_IPV4_ADDRESS_FOR_S1U = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_S1U = 2152; # Spec 2152 ENB_PORT_FOR_S1U = 2152; # Spec 2152
ENB_IPV4_ADDRESS_FOR_X2C = "172.16.0.1"; ENB_IPV4_ADDRESS_FOR_X2C = "CI_ENB_IP_ADDR";
ENB_PORT_FOR_X2C = 36422; # Spec 36422 ENB_PORT_FOR_X2C = 36422; # Spec 36422
}; };
...@@ -206,16 +206,15 @@ eNBs = ...@@ -206,16 +206,15 @@ eNBs =
MACRLCs = ( MACRLCs = (
{ {
num_cc = 1; num_cc = 1;
local_s_if_name = "lo"; local_s_if_name = "ens3";
remote_s_address = "127.0.0.1"; remote_s_address = "CI_UE_IP_ADDR";
local_s_address = "127.0.0.1"; local_s_address = "CI_ENB_IP_ADDR";
local_s_portc = 50001; local_s_portc = 50001;
remote_s_portc = 50000; remote_s_portc = 50000;
local_s_portd = 50011; local_s_portd = 50011;
remote_s_portd = 50010; remote_s_portd = 50010;
tr_s_preference = "nfapi"; tr_s_preference = "nfapi";
tr_n_preference = "local_RRC"; tr_n_preference = "local_RRC";
scheduler_mode = "fairRR";
} }
); );
......
ci-scripts/conf_files/ue.nfapi.conf
View file @ d26aefaa
...@@ -21,8 +21,8 @@ L1s = ( ...@@ -21,8 +21,8 @@ L1s = (
num_cc = 1; num_cc = 1;
tr_n_preference = "nfapi"; tr_n_preference = "nfapi";
local_n_if_name = "ens3"; local_n_if_name = "ens3";
remote_n_address = "127.0.0.1"; //Proxy IP remote_n_address = "CI_ENB_IP_ADDR";
local_n_address = "127.0.0.1"; local_n_address = "CI_UE_IP_ADDR";
local_n_portc = 50000; local_n_portc = 50000;
remote_n_portc = 50001; remote_n_portc = 50001;
local_n_portd = 50010; local_n_portd = 50010;
......
executables/nr-ue.c
View file @ d26aefaa
...@@ -366,15 +366,6 @@ static void *NRUE_phy_stub_standalone_pnf_task(void *arg) ...@@ -366,15 +366,6 @@ static void *NRUE_phy_stub_standalone_pnf_task(void *arg)
free(rach_ind); free(rach_ind);
nr_Msg1_transmitted(mod_id, CC_id, frame, gNB_id); nr_Msg1_transmitted(mod_id, CC_id, frame, gNB_id);
} }
if (rx_ind && rx_ind->number_of_pdus > 0)
{
NR_UL_IND_t UL_INFO = {
.rx_ind = *rx_ind,
};
send_nsa_standalone_msg(&UL_INFO, rx_ind->header.message_id);
free(rx_ind->pdu_list);
free(rx_ind);
}
if (crc_ind && crc_ind->number_crcs > 0) if (crc_ind && crc_ind->number_crcs > 0)
{ {
NR_UL_IND_t UL_INFO = { NR_UL_IND_t UL_INFO = {
...@@ -384,6 +375,15 @@ static void *NRUE_phy_stub_standalone_pnf_task(void *arg) ...@@ -384,6 +375,15 @@ static void *NRUE_phy_stub_standalone_pnf_task(void *arg)
free(crc_ind->crc_list); free(crc_ind->crc_list);
free(crc_ind); free(crc_ind);
} }
if (rx_ind && rx_ind->number_of_pdus > 0)
{
NR_UL_IND_t UL_INFO = {
.rx_ind = *rx_ind,
};
send_nsa_standalone_msg(&UL_INFO, rx_ind->header.message_id);
free(rx_ind->pdu_list);
free(rx_ind);
}
} }
return NULL; return NULL;
} }
......
targets/PROJECTS/GENERIC-LTE-EPC/CONF/episci_rcc.band78.tm1.106PRB.nfapi.conf 0 → 100644
View file @ d26aefaa
Active_gNBs = ( "gNB-Eurecom-5GNRBox");
# Asn1_verbosity, choice in: none, info, annoying
Asn1_verbosity = "none";
gNBs =
(
{
////////// Identification parameters:
gNB_ID = 0xe00;
cell_type = "CELL_MACRO_GNB";
gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 5;
plmn_list = ({mcc = 320; mnc = 230; mnc_length = 3;});
tr_s_preference = "local_mac"
////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0;
pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1;
servingCellConfigCommon = (
{
#spCellConfigCommon
physCellId = 0;
# downlinkConfigCommon
#frequencyInfoDL
# this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell
dl_frequencyBand = 78;
# this is 3600 MHz
dl_absoluteFrequencyPointA = 640000;
#scs-SpecificCarrierList
dl_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
dl_subcarrierSpacing = 1;
dl_carrierBandwidth = 106;
#initialDownlinkBWP
#genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0;
initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; #for DL slot
initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB
initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13
initialDLBWPk0_1 = 0; #for mixed slot
initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5
#uplinkConfigCommon
#frequencyInfoUL
ul_frequencyBand = 78;
#scs-SpecificCarrierList
ul_offstToCarrier = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
ul_subcarrierSpacing = 1;
ul_carrierBandwidth = 106;
pMax = 20;
#initialUplinkBWP
#genericParameters
initialULBWPlocationAndBandwidth = 6368;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1;
#rach-ConfigCommon
#rach-ConfigGeneric
prach_ConfigurationIndex = 98;
#prach_msg1_FDM
#0 = one, 1=two, 2=four, 3=eight
prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -100;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6;
#powerRampingStep
# 0=dB0,1=dB2,2=dB4,3=dB6
powerRampingStep = 1;
#ra_ReponseWindow
#1,2,4,8,10,20,40,80
ra_ResponseWindow = 5;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; //15;
#ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7;
rsrp_ThresholdSSB = 19;
#prach-RootSequenceIndex_PR
#1 = 839, 2 = 139
prach_RootSequenceIndex_PR = 2;
prach_RootSequenceIndex = 1;
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
#
msg1_SubcarrierSpacing = 1,
# restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for UL slot
initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13
initialULBWPk2_1 = 6; # used for mixed slot
initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 52; # this is SS=10 L=4
initialULBWPk2_2 = 7; # used for Msg.3 during RA
initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4
msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90;
# pucch-ConfigCommon setup :
# pucchGroupHopping
# 0 = neither, 1= group hopping, 2=sequence hopping
pucchGroupHopping = 0;
hoppingId = 40;
p0_nominal = -90;
# ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1; #0x80;
# ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
ssb_periodicityServingCell = 2;
# dmrs_TypeA_position
# 0 = pos2, 1 = pos3
dmrs_TypeA_Position = 0;
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
subcarrierSpacing = 1;
#tdd-UL-DL-ConfigurationCommon
# subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
referenceSubcarrierSpacing = 1;
# pattern1
# dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7; //8; //7;
nrofDownlinkSymbols = 6; //0; //6;
nrofUplinkSlots = 2;
nrofUplinkSymbols = 4; //0; //4;
ssPBCH_BlockPower = -25;
}
);
# ------- SCTP definitions
SCTP :
{
# Number of streams to use in input/output
SCTP_INSTREAMS = 2;
SCTP_OUTSTREAMS = 2;
};
////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.61.195";
ipv6 = "192:168:30::17";
active = "yes";
preference = "ipv4";
}
);
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "172.16.0.1"; # rrc.band7.tm1.nfapi.conf:line 201
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES :
{ # All of these have to be IP addr of gNB
# if in CORE container, make it 172.16.0.X
# if not launched in CORE, can set to lo (127.0.0.2)
GNB_INTERFACE_NAME_FOR_S1_MME = "ctrl0";
GNB_IPV4_ADDRESS_FOR_S1_MME = "172.16.0.2";
GNB_INTERFACE_NAME_FOR_S1U = "ctrl0";
GNB_IPV4_ADDRESS_FOR_S1U = "172.16.0.2";
GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "172.16.0.2";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
};
}
);
MACRLCs = (
{
num_cc = 1;
local_s_if_name = "lo:";
remote_s_address = "127.0.0.1"; // pnf addr [!]
local_s_address = "127.0.0.2"; // vnf addr
local_s_portc = 50601; // vnf p5 port
remote_s_portc = 50600; // pnf p5 port [!]
local_s_portd = 50611; // vnf p7 port [!]
remote_s_portd = 50610; // pnf p7 port [!]
tr_s_preference = "nfapi";
tr_n_preference = "local_RRC";
}
)
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_ENABLE";
}
);
log_config =
{
global_log_level ="info";
global_log_verbosity ="medium";
hw_log_level ="info";
hw_log_verbosity ="medium";
phy_log_level ="info";
phy_log_verbosity ="medium";
mac_log_level ="info";
mac_log_verbosity ="high";
rlc_log_level ="info";
rlc_log_verbosity ="medium";
pdcp_log_level ="info";
pdcp_log_verbosity ="medium";
rrc_log_level ="info";
rrc_log_verbosity ="medium";
};
targets/PROJECTS/GENERIC-LTE-EPC/CONF/rcc.band78.tm1.106PRB.nfapi.conf
View file @ d26aefaa
...@@ -13,15 +13,15 @@ gNBs = ...@@ -13,15 +13,15 @@ gNBs =
gNB_name = "gNB-Eurecom-5GNRBox"; gNB_name = "gNB-Eurecom-5GNRBox";
// Tracking area code, 0x0000 and 0xfffe are reserved values // Tracking area code, 0x0000 and 0xfffe are reserved values
tracking_area_code = 5; tracking_area_code = 1;
plmn_list = ({mcc = 320; mnc = 230; mnc_length = 3;}); plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});
tr_s_preference = "local_mac" tr_s_preference = "local_mac"
////////// Physical parameters: ////////// Physical parameters:
ssb_SubcarrierOffset = 31; //0; ssb_SubcarrierOffset = 0;
pdsch_AntennaPorts = 1; pdsch_AntennaPorts = 1;
pusch_AntennaPorts = 1; pusch_AntennaPorts = 1;
...@@ -33,8 +33,8 @@ gNBs = ...@@ -33,8 +33,8 @@ gNBs =
# downlinkConfigCommon # downlinkConfigCommon
#frequencyInfoDL #frequencyInfoDL
# this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP) # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
absoluteFrequencySSB = 641272; //641032; #641968; 641968=start of ssb at 3600MHz + 82 RBs 641032=center of SSB at center of cell absoluteFrequencySSB = 641032;
dl_frequencyBand = 78; dl_frequencyBand = 78;
# this is 3600 MHz # this is 3600 MHz
dl_absoluteFrequencyPointA = 640000; dl_absoluteFrequencyPointA = 640000;
...@@ -46,23 +46,37 @@ gNBs = ...@@ -46,23 +46,37 @@ gNBs =
dl_carrierBandwidth = 106; dl_carrierBandwidth = 106;
#initialDownlinkBWP #initialDownlinkBWP
#genericParameters #genericParameters
# this is RBstart=84,L=13 (275*(L-1))+RBstart # this is RBstart=41,L=24 (275*(L-1))+RBstart
initialDLBWPlocationAndBandwidth = 6368; initialDLBWPlocationAndBandwidth = 6366;
# subcarrierSpacing # subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialDLBWPsubcarrierSpacing = 1; initialDLBWPsubcarrierSpacing = 1;
#pdcch-ConfigCommon #pdcch-ConfigCommon
initialDLBWPcontrolResourceSetZero = 0; initialDLBWPcontrolResourceSetZero = 12;
initialDLBWPsearchSpaceZero = 0; initialDLBWPsearchSpaceZero = 0;
#pdsch-ConfigCommon #pdsch-ConfigCommon
#pdschTimeDomainAllocationList (up to 16 entries) #pdschTimeDomainAllocationList (up to 16 entries)
initialDLBWPk0_0 = 0; #for DL slot initialDLBWPk0_0 = 0;
initialDLBWPmappingType_0 = 0; #0=typeA,1=typeB #initialULBWPmappingType
initialDLBWPstartSymbolAndLength_0 = 40; #this is SS=1,L=13 #0=typeA,1=typeB
initialDLBWPmappingType_0 = 0;
initialDLBWPk0_1 = 0; #for mixed slot #this is SS=1,L=13
initialDLBWPstartSymbolAndLength_0 = 40;
initialDLBWPk0_1 = 0;
initialDLBWPmappingType_1 = 0; initialDLBWPmappingType_1 = 0;
initialDLBWPstartSymbolAndLength_1 = 57; #this is SS=1,L=5 #this is SS=2,L=12
initialDLBWPstartSymbolAndLength_1 = 53;
initialDLBWPk0_2 = 0;
initialDLBWPmappingType_2 = 0;
#this is SS=1,L=12
initialDLBWPstartSymbolAndLength_2 = 54;
initialDLBWPk0_3 = 0;
initialDLBWPmappingType_3 = 0;
#this is SS=1,L=5
initialDLBWPstartSymbolAndLength_3 = 57;
#uplinkConfigCommon #uplinkConfigCommon
#frequencyInfoUL #frequencyInfoUL
...@@ -76,7 +90,7 @@ gNBs = ...@@ -76,7 +90,7 @@ gNBs =
pMax = 20; pMax = 20;
#initialUplinkBWP #initialUplinkBWP
#genericParameters #genericParameters
initialULBWPlocationAndBandwidth = 6368; initialULBWPlocationAndBandwidth = 6366;
# subcarrierSpacing # subcarrierSpacing
# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
initialULBWPsubcarrierSpacing = 1; initialULBWPsubcarrierSpacing = 1;
...@@ -88,7 +102,7 @@ gNBs = ...@@ -88,7 +102,7 @@ gNBs =
prach_msg1_FDM = 0; prach_msg1_FDM = 0;
prach_msg1_FrequencyStart = 0; prach_msg1_FrequencyStart = 0;
zeroCorrelationZoneConfig = 13; zeroCorrelationZoneConfig = 13;
preambleReceivedTargetPower = -100; preambleReceivedTargetPower = -118;
#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200) #preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
preambleTransMax = 6; preambleTransMax = 6;
#powerRampingStep #powerRampingStep
...@@ -96,12 +110,12 @@ gNBs = ...@@ -96,12 +110,12 @@ gNBs =
powerRampingStep = 1; powerRampingStep = 1;
#ra_ReponseWindow #ra_ReponseWindow
#1,2,4,8,10,20,40,80 #1,2,4,8,10,20,40,80
ra_ResponseWindow = 5; ra_ResponseWindow = 4;
#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
#1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4; ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;
#oneHalf (0..15) 4,8,12,16,...60,64 #oneHalf (0..15) 4,8,12,16,...60,64
ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; //15; ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 15;
#ra_ContentionResolutionTimer #ra_ContentionResolutionTimer
#(0..7) 8,16,24,32,40,48,56,64 #(0..7) 8,16,24,32,40,48,56,64
ra_ContentionResolutionTimer = 7; ra_ContentionResolutionTimer = 7;
...@@ -113,22 +127,25 @@ gNBs = ...@@ -113,22 +127,25 @@ gNBs =
# SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
# #
msg1_SubcarrierSpacing = 1, msg1_SubcarrierSpacing = 1,
# restrictedSetConfig # restrictedSetConfig
# 0=unrestricted, 1=restricted type A, 2=restricted type B # 0=unrestricted, 1=restricted type A, 2=restricted type B
restrictedSetConfig = 0, restrictedSetConfig = 0,
# pusch-ConfigCommon (up to 16 elements) # pusch-ConfigCommon (up to 16 elements)
initialULBWPk2_0 = 6; # used for UL slot initialULBWPk2_0 = 6;
initialULBWPmappingType_0 = 1 initialULBWPmappingType_0 = 1
initialULBWPstartSymbolAndLength_0 = 41; # this is SS=0 L=13 # this is SS=0 L=11
initialULBWPstartSymbolAndLength_0 = 55;
initialULBWPk2_1 = 6; # used for mixed slot initialULBWPk2_1 = 6;
initialULBWPmappingType_1 = 1; initialULBWPmappingType_1 = 1;
initialULBWPstartSymbolAndLength_1 = 52; # this is SS=10 L=4 # this is SS=0 L=12
initialULBWPstartSymbolAndLength_1 = 69;
initialULBWPk2_2 = 7; # used for Msg.3 during RA initialULBWPk2_2 = 7;
initialULBWPmappingType_2 = 1; initialULBWPmappingType_2 = 1;
initialULBWPstartSymbolAndLength_2 = 52; # this is SS=10 L=4 # this is SS=10 L=4
initialULBWPstartSymbolAndLength_2 = 52;
msg3_DeltaPreamble = 1; msg3_DeltaPreamble = 1;
p0_NominalWithGrant =-90; p0_NominalWithGrant =-90;
...@@ -142,7 +159,7 @@ gNBs = ...@@ -142,7 +159,7 @@ gNBs =
# ssb_PositionsInBurs_BitmapPR # ssb_PositionsInBurs_BitmapPR
# 1=short, 2=medium, 3=long # 1=short, 2=medium, 3=long
ssb_PositionsInBurst_PR = 2; ssb_PositionsInBurst_PR = 2;
ssb_PositionsInBurst_Bitmap = 1; #0x80; ssb_PositionsInBurst_Bitmap = 1;
# ssb_periodicityServingCell # ssb_periodicityServingCell
# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 # 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
...@@ -165,16 +182,40 @@ gNBs = ...@@ -165,16 +182,40 @@ gNBs =
# dl_UL_TransmissionPeriodicity # dl_UL_TransmissionPeriodicity
# 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10 # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
dl_UL_TransmissionPeriodicity = 6; dl_UL_TransmissionPeriodicity = 6;
nrofDownlinkSlots = 7; //8; //7; nrofDownlinkSlots = 7;
nrofDownlinkSymbols = 6; //0; //6; nrofDownlinkSymbols = 6;
nrofUplinkSlots = 2; nrofUplinkSlots = 2;
nrofUplinkSymbols = 4; //0; //4; nrofUplinkSymbols = 4;
ssPBCH_BlockPower = -25; ssPBCH_BlockPower = 10;
} }
); );
srb1_parameters :
{
# timer_poll_retransmit = (ms) [5, 10, 15, 20,... 250, 300, 350, ... 500]
timer_poll_retransmit = 80;
# timer_reordering = (ms) [0,5, ... 100, 110, 120, ... ,200]
timer_reordering = 35;
# timer_reordering = (ms) [0,5, ... 250, 300, 350, ... ,500]
timer_status_prohibit = 0;
# poll_pdu = [4, 8, 16, 32 , 64, 128, 256, infinity(>10000)]
poll_pdu = 4;
# poll_byte = (kB) [25,50,75,100,125,250,375,500,750,1000,1250,1500,2000,3000,infinity(>10000)]
poll_byte = 99999;
# max_retx_threshold = [1, 2, 3, 4 , 6, 8, 16, 32]
max_retx_threshold = 4;
}
# ------- SCTP definitions # ------- SCTP definitions
SCTP : SCTP :
{ {
...@@ -185,36 +226,21 @@ gNBs = ...@@ -185,36 +226,21 @@ gNBs =
////////// MME parameters: ////////// MME parameters:
mme_ip_address = ( { ipv4 = "192.168.61.195"; mme_ip_address = ( { ipv4 = "192.168.12.26";
ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";
active = "yes"; active = "yes";
preference = "ipv4"; preference = "ipv4";
} }
); );
///X2
enable_x2 = "yes";
t_reloc_prep = 1000; /* unit: millisecond */
tx2_reloc_overall = 2000; /* unit: millisecond */
t_dc_prep = 1000; /* unit: millisecond */
t_dc_overall = 2000; /* unit: millisecond */
target_enb_x2_ip_address = (
{ ipv4 = "172.16.0.1"; # rrc.band7.tm1.nfapi.conf:line 201
ipv6 = "192:168:30::17";
preference = "ipv4";
}
);
NETWORK_INTERFACES : NETWORK_INTERFACES :
{ # All of these have to be IP addr of gNB {
# if in CORE container, make it 172.16.0.X
# if not launched in CORE, can set to lo (127.0.0.2) GNB_INTERFACE_NAME_FOR_S1_MME = "eth0";
GNB_INTERFACE_NAME_FOR_S1_MME = "ctrl0"; GNB_IPV4_ADDRESS_FOR_S1_MME = "192.168.12.111/24";
GNB_IPV4_ADDRESS_FOR_S1_MME = "172.16.0.2"; GNB_INTERFACE_NAME_FOR_S1U = "eth0";
GNB_INTERFACE_NAME_FOR_S1U = "ctrl0"; GNB_IPV4_ADDRESS_FOR_S1U = "192.168.12.111/24";
GNB_IPV4_ADDRESS_FOR_S1U = "172.16.0.2";
GNB_PORT_FOR_S1U = 2152; # Spec 2152 GNB_PORT_FOR_S1U = 2152; # Spec 2152
GNB_IPV4_ADDRESS_FOR_X2C = "172.16.0.2";
GNB_PORT_FOR_X2C = 36422; # Spec 36422
}; };
} }
); );
...@@ -226,10 +252,10 @@ MACRLCs = ( ...@@ -226,10 +252,10 @@ MACRLCs = (
local_s_if_name = "lo:"; local_s_if_name = "lo:";
remote_s_address = "127.0.0.1"; // pnf addr [!] remote_s_address = "127.0.0.1"; // pnf addr [!]
local_s_address = "127.0.0.2"; // vnf addr local_s_address = "127.0.0.2"; // vnf addr
local_s_portc = 50601; // vnf p5 port local_s_portc = 50001; // vnf p5 port
remote_s_portc = 50600; // pnf p5 port [!] remote_s_portc = 50000; // pnf p5 port [!]
local_s_portd = 50611; // vnf p7 port [!] local_s_portd = 50011; // vnf p7 port [!]
remote_s_portd = 50610; // pnf p7 port [!] remote_s_portd = 50010; // pnf p7 port [!]
tr_s_preference = "nfapi"; tr_s_preference = "nfapi";
tr_n_preference = "local_RRC"; tr_n_preference = "local_RRC";
} }
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment