Skip to content

O
OpenXG-RAN
Commit 05c07c40 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

removal of some logs. Temporary suppression of QAM256 for 5G Records testing

parent 1ab1fde7
Show whitespace changes
Inline Side-by-side
Showing with 47 additions and 33 deletions
openair1/PHY/CODING/nr_rate_matching.c
View file @ 05c07c40
......@@ -409,7 +409,7 @@ int nr_rate_matching_ldpc(uint8_t Ilbrm,
#endif
if (Foffset > E) {
LOG_E(PHY,"nr_rate_matching: invalid parameters (Foffset %d > E %d)\n",Foffset,E);
LOG_E(PHY,"nr_rate_matching: invalid parameters (Foffset %d > E %d) F %d, k0 %d, Ncb %d, rvidx %d, Ilbrm %d\n",Foffset,E,F, ind, Ncb, rvidx, Ilbrm);
return -1;
}
if (Foffset > Ncb) {
......
openair1/PHY/NR_TRANSPORT/nr_dlsch_coding.c
View file @ 05c07c40
......@@ -218,14 +218,14 @@ void ldpc8blocks( void *p) {
#endif
uint32_t E = nr_get_E(G, impp->n_segments, mod_order, rel15->nrOfLayers, rr);
//#ifdef DEBUG_DLSCH_CODING
LOG_D(NR_PHY,"Rate Matching, Code segment %d/%d (coded bits (G) %u, E %d, Filler bits %d, Filler offset %d mod_order %d, nb_rb %d)...\n",
LOG_D(NR_PHY,"Rate Matching, Code segment %d/%d (coded bits (G) %u, E %d, Filler bits %d, Filler offset %d mod_order %d, nb_rb %d,nrOfLayer %d)...\n",
rr,
impp->n_segments,
G,
E,
impp->F,
Kr-impp->F-2*(*impp->Zc),
mod_order,nb_rb);
mod_order,nb_rb,rel15->nrOfLayers);
// for tbslbrm calculation according to 5.4.2.1 of 38.212
uint8_t Nl = 4;
......@@ -248,6 +248,20 @@ void ldpc8blocks( void *p) {
Kr-impp->F-2*(*impp->Zc),
rel15->rvIndex[0],
E);
if (Kr-impp->F-2*(*impp->Zc)> E) {
LOG_E(PHY,"dlsch coding A %d Kr %d G %d (nb_rb %d, nb_symb_sch %d, nb_re_dmrs %d, length_dmrs %d, mod_order %d)\n",
A,impp->K,G, nb_rb,nb_symb_sch,nb_re_dmrs,length_dmrs,(int)mod_order);
LOG_E(NR_PHY,"Rate Matching, Code segment %d/%d (coded bits (G) %u, E %d, Kr %d, Filler bits %d, Filler offset %d mod_order %d, nb_rb %d)...\n",
rr,
impp->n_segments,
G,
E,
Kr,
impp->F,
Kr-impp->F-2*(*impp->Zc),
mod_order,nb_rb);
}
#ifdef DEBUG_DLSCH_CODING
for (int i =0; i<16; i++)
......
openair1/PHY/NR_TRANSPORT/pucch_rx.c
View file @ 05c07c40
......@@ -439,7 +439,7 @@ void nr_decode_pucch0(PHY_VARS_gNB *gNB,
uci_pdu->harq->harq_confidence_level = no_conf ? 1 : 0;
uci_pdu->harq->harq_list = (nfapi_nr_harq_t*)malloc(1);
uci_pdu->harq->harq_list[0].harq_value = !(index&0x01);
if (no_conf) LOG_I(PHY, "[DLSCH/PDSCH/PUCCH] %d.%d HARQ value %d (0 pass, 1 fail) with confidence level %d (0 is good, 1 is bad) xrt_mag %d xrt_mag_next %d n0 %d (%d,%d) pucch0_thres %d, cqi %d, SNRtimes10 %d, energy %f, sync_pos %d\n",
LOG_D(PHY, "[DLSCH/PDSCH/PUCCH] %d.%d HARQ value %d (0 pass, 1 fail) with confidence level %d (0 is good, 1 is bad) xrt_mag %d xrt_mag_next %d n0 %d (%d,%d) pucch0_thres %d, cqi %d, SNRtimes10 %d, energy %f, sync_pos %d\n",
frame,slot,uci_pdu->harq->harq_list[0].harq_value,uci_pdu->harq->harq_confidence_level,xrtmag_dBtimes10,xrtmag_next_dBtimes10,max_n0,uci_stats->pucch0_n00,uci_stats->pucch0_n01,uci_stats->pucch0_thres,cqi,SNRtimes10,10*log10((double)sigenergy),gNB->ulsch_stats[0].sync_pos);
if (pucch_pdu->sr_flag == 1) {
......@@ -458,7 +458,7 @@ void nr_decode_pucch0(PHY_VARS_gNB *gNB,
uci_pdu->harq->harq_list[1].harq_value = !(index&0x01);
uci_pdu->harq->harq_list[0].harq_value = !((index>>1)&0x01);
if (no_conf) LOG_I(PHY, "[DLSCH/PDSCH/PUCCH] %d.%d HARQ values %d (0 pass, 1 fail) and %d with confidence level %d (0 is good, 1 is bad), xrt_mag %d xrt_mag_next %d n0 %d (%d,%d) pucch0_thres %d, cqi %d, SNRtimes10 %d,sync_pos %d\n",
LOG_D(PHY, "[DLSCH/PDSCH/PUCCH] %d.%d HARQ values %d (0 pass, 1 fail) and %d with confidence level %d (0 is good, 1 is bad), xrt_mag %d xrt_mag_next %d n0 %d (%d,%d) pucch0_thres %d, cqi %d, SNRtimes10 %d,sync_pos %d\n",
frame,slot,uci_pdu->harq->harq_list[1].harq_value,uci_pdu->harq->harq_list[0].harq_value,uci_pdu->harq->harq_confidence_level,xrtmag_dBtimes10,xrtmag_next_dBtimes10,max_n0,uci_stats->pucch0_n00,uci_stats->pucch0_n01,uci_stats->pucch0_thres,cqi,SNRtimes10,gNB->ulsch_stats[0].sync_pos);
if (pucch_pdu->sr_flag == 1) {
uci_pdu->sr = calloc(1,sizeof(*uci_pdu->sr));
......
openair1/SCHED_NR/nr_prach_procedures.c
View file @ 05c07c40
......@@ -173,7 +173,7 @@ void L1_nr_prach_procedures(PHY_VARS_gNB *gNB,int frame,int slot) {
if ((gNB->prach_energy_counter == 100) && (max_preamble_energy[0] > gNB->measurements.prach_I0+gNB->prach_thres)) {
LOG_I(NR_PHY,"[gNB %d][RAPROC] Frame %d, slot %d Initiating RA procedure with preamble %d, energy %d.%d dB (I0 %d, thres %d), delay %d start symbol %u freq index %u\n",
LOG_D(NR_PHY,"[gNB %d][RAPROC] Frame %d, slot %d Initiating RA procedure with preamble %d, energy %d.%d dB (I0 %d, thres %d), delay %d start symbol %u freq index %u\n",
gNB->Mod_id,
frame,
slot,
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_RA.c
View file @ 05c07c40
......@@ -228,7 +228,7 @@ void find_SSB_and_RO_available(module_id_t module_idP) {
cc->total_prach_occasions = total_RA_occasions - unused_RA_occasion;
cc->num_active_ssb = num_active_ssb;
LOG_I(NR_MAC,
LOG_D(NR_MAC,
"Total available RO %d, num of active SSB %d: unused RO = %d association_period %u N_RA_sfn %u total_prach_occasions_per_config_period %u\n",
cc->total_prach_occasions,
cc->num_active_ssb,
......@@ -676,7 +676,7 @@ void nr_initiate_ra_proc(module_id_t module_idP,
ra->preamble_index = preamble_index;
ra->beam_id = beam_index;
LOG_I(NR_MAC,
LOG_D(NR_MAC,
"[gNB %d][RAPROC] CC_id %d Frame %d Activating Msg2 generation in frame %d, slot %d using RA rnti %x SSB "
"index %u RA index %d\n",
module_idP,
......@@ -791,7 +791,7 @@ void nr_generate_Msg3_retransmission(module_id_t module_idP, int CC_id, frame_t
return;
}
LOG_I(NR_MAC, "[gNB %d][RAPROC] Frame %d, Slot %d : CC_id %d Scheduling retransmission of Msg3 in (%d,%d)\n",
LOG_D(NR_MAC, "[gNB %d][RAPROC] Frame %d, Slot %d : CC_id %d Scheduling retransmission of Msg3 in (%d,%d)\n",
module_idP, frame, slot, CC_id, sched_frame, sched_slot);
nfapi_nr_ul_tti_request_t *future_ul_tti_req = &RC.nrmac[module_idP]->UL_tti_req_ahead[CC_id][sched_slot];
......@@ -946,7 +946,7 @@ void nr_get_Msg3alloc(module_id_t module_id,
k2 = *pusch_TimeDomainAllocationList->list.array[i]->k2;
int start_symbol_index,nr_of_symbols;
SLIV2SL(pusch_TimeDomainAllocationList->list.array[i]->startSymbolAndLength, &start_symbol_index, &nr_of_symbols);
LOG_I(NR_MAC,"Checking Msg3 TDA %d : k2 %d, sliv %d,S %d L %d\n",i,(int)k2,(int)pusch_TimeDomainAllocationList->list.array[i]->startSymbolAndLength,start_symbol_index,nr_of_symbols);
LOG_D(NR_MAC,"Checking Msg3 TDA %d : k2 %d, sliv %d,S %d L %d\n",i,(int)k2,(int)pusch_TimeDomainAllocationList->list.array[i]->startSymbolAndLength,start_symbol_index,nr_of_symbols);
// we want to transmit in the uplink symbols of mixed slot AND assuming Msg2 was in the mixed slot
if ((k2 + DELTA[mu])%nb_slots_per_period == 0) {
temp_slot = current_slot + k2 + DELTA[mu]; // msg3 slot according to 8.3 in 38.213
......@@ -987,7 +987,7 @@ void nr_get_Msg3alloc(module_id_t module_id,
tdd_beam_association[num_tdd_period] = ra->beam_id;
}
LOG_I(NR_MAC, "[RAPROC] Msg3 slot %d: current slot %u Msg3 frame %u k2 %u Msg3_tda_id %u\n", ra->Msg3_slot, current_slot, ra->Msg3_frame, k2,ra->Msg3_tda_id);
LOG_D(NR_MAC, "[RAPROC] Msg3 slot %d: current slot %u Msg3 frame %u k2 %u Msg3_tda_id %u\n", ra->Msg3_slot, current_slot, ra->Msg3_frame, k2,ra->Msg3_tda_id);
uint16_t *vrb_map_UL =
&RC.nrmac[module_id]->common_channels[CC_id].vrb_map_UL[ra->Msg3_slot * MAX_BWP_SIZE];
......@@ -1156,7 +1156,7 @@ void nr_add_msg3(module_id_t module_idP, int CC_id, frame_t frameP, sub_frame_t
fh = ubwp->bwp_Dedicated->pusch_Config->choice.setup->frequencyHopping ? 1 : 0;
}
LOG_I(NR_MAC, "Frame %d, Slot %d Adding Msg3 UL Config Request for (%d,%d) : (%d,%d,%d) for rnti: %d\n",
LOG_D(NR_MAC, "Frame %d, Slot %d Adding Msg3 UL Config Request for (%d,%d) : (%d,%d,%d) for rnti: %d\n",
frameP,
slotP,
ra->Msg3_frame,
......@@ -1310,7 +1310,7 @@ void nr_generate_Msg2(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
dl_req->nPDUs+=1;
nfapi_nr_dl_tti_pdsch_pdu_rel15_t *pdsch_pdu_rel15 = &dl_tti_pdsch_pdu->pdsch_pdu.pdsch_pdu_rel15;
LOG_A(NR_MAC,"[gNB %d][RAPROC] CC_id %d Frame %d, slotP %d: Generating RA-Msg2 DCI, rnti 0x%x, state %d, CoreSetType %d\n",
LOG_D(NR_MAC,"[gNB %d][RAPROC] CC_id %d Frame %d, slotP %d: Generating RA-Msg2 DCI, rnti 0x%x, state %d, CoreSetType %d\n",
module_idP, CC_id, frameP, slotP, ra->RA_rnti, ra->state,pdcch_pdu_rel15->CoreSetType);
// SCF222: PDU index incremented for each PDSCH PDU sent in TX control message. This is used to associate control
......@@ -1471,9 +1471,9 @@ void nr_generate_Msg2(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
nr_add_msg3(module_idP, CC_id, frameP, slotP, ra, (uint8_t *) &tx_req->TLVs[0].value.direct[0]);
if(ra->cfra) {
LOG_I(NR_MAC, "Frame %d, Subframe %d: Setting RA-Msg3 reception (CFRA) for SFN.Slot %d.%d\n", frameP, slotP, ra->Msg3_frame, ra->Msg3_slot);
LOG_D(NR_MAC, "Frame %d, Subframe %d: Setting RA-Msg3 reception (CFRA) for SFN.Slot %d.%d\n", frameP, slotP, ra->Msg3_frame, ra->Msg3_slot);
}
else LOG_I(NR_MAC, "Frame %d, Subframe %d: Setting RA-Msg3 reception (CBRA) for SFN.Slot %d.%d\n", frameP, slotP, ra->Msg3_frame, ra->Msg3_slot);
else LOG_D(NR_MAC, "Frame %d, Subframe %d: Setting RA-Msg3 reception (CBRA) for SFN.Slot %d.%d\n", frameP, slotP, ra->Msg3_frame, ra->Msg3_slot);
T(T_GNB_MAC_DL_RAR_PDU_WITH_DATA, T_INT(module_idP), T_INT(CC_id), T_INT(ra->RA_rnti), T_INT(frameP),
T_INT(slotP), T_INT(0), T_BUFFER(&tx_req->TLVs[0].value.direct[0], tx_req->TLVs[0].length));
......@@ -1749,7 +1749,7 @@ void nr_generate_Msg4(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
dl_req->nPDUs+=1;
nfapi_nr_dl_tti_pdsch_pdu_rel15_t *pdsch_pdu_rel15 = &dl_tti_pdsch_pdu->pdsch_pdu.pdsch_pdu_rel15;
LOG_A(NR_MAC, "[gNB %d] [RAPROC] CC_id %d Frame %d, slotP %d: Generating RA-Msg4 DCI, state %d\n", module_idP, CC_id, frameP, slotP, ra->state);
LOG_D(NR_MAC, "[gNB %d] [RAPROC] CC_id %d Frame %d, slotP %d: Generating RA-Msg4 DCI, state %d\n", module_idP, CC_id, frameP, slotP, ra->state);
// SCF222: PDU index incremented for each PDSCH PDU sent in TX control message. This is used to associate control
// information to data and is reset every slot.
......@@ -1823,7 +1823,7 @@ void nr_generate_Msg4(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
dci_payload.pucch_resource_indicator = delta_PRI; // This is delta_PRI from 9.2.1 in 38.213
dci_payload.pdsch_to_harq_feedback_timing_indicator.val = pucch->timing_indicator;
LOG_I(NR_MAC,
LOG_D(NR_MAC,
"[RAPROC] DCI 1_0 payload: freq_alloc %d (%d,%d,%d), time_alloc %d, vrb to prb %d, mcs %d tb_scaling %d pucchres %d harqtiming %d\n",
dci_payload.frequency_domain_assignment.val,
pdsch_pdu_rel15->rbStart,
......@@ -1836,7 +1836,7 @@ void nr_generate_Msg4(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
dci_payload.pucch_resource_indicator,
dci_payload.pdsch_to_harq_feedback_timing_indicator.val);
LOG_I(NR_MAC,
LOG_D(NR_MAC,
"[RAPROC] DCI params: rnti 0x%x, rnti_type %d, dci_format %d coreset params: FreqDomainResource %llx, start_symbol %d n_symb %d, BWPsize %d\n",
pdcch_pdu_rel15->dci_pdu[0].RNTI,
NR_RNTI_TC,
......@@ -1906,7 +1906,7 @@ void nr_generate_Msg4(module_id_t module_idP, int CC_id, frame_t frameP, sub_fra
if(ra->msg3_dcch_dtch) {
// If the UE used MSG3 to transfer a DCCH or DTCH message, then contention resolution is successful upon transmission of PDCCH
LOG_I(NR_MAC, "(ue %i, rnti 0x%04x) CBRA procedure succeeded!\n", UE_id, ra->rnti);
LOG_D(NR_MAC, "(ue %i, rnti 0x%04x) CBRA procedure succeeded!\n", UE_id, ra->rnti);
nr_clear_ra_proc(module_idP, CC_id, frameP, ra);
UE_info->active[UE_id] = true;
UE_info->Msg4_ACKed[UE_id] = true;
......@@ -1939,12 +1939,12 @@ void nr_check_Msg4_Ack(module_id_t module_id, int CC_id, frame_t frame, sub_fram
if (harq->is_waiting == 0) {
if (harq->round == 0) {
if (stats->dlsch_errors == 0) {
LOG_A(NR_MAC, "(ue %i, rnti 0x%04x) Received Ack of RA-Msg4. CBRA procedure succeeded!\n", UE_id, ra->rnti);
LOG_D(NR_MAC, "(ue %i, rnti 0x%04x) Received Ack of RA-Msg4. CBRA procedure succeeded!\n", UE_id, ra->rnti);
UE_info->active[UE_id] = true;
UE_info->Msg4_ACKed[UE_id] = true;
}
else {
LOG_I(NR_MAC, "(ue %i, rnti 0x%04x) RA Procedure failed at Msg4!\n", UE_id, ra->rnti);
LOG_D(NR_MAC, "(ue %i, rnti 0x%04x) RA Procedure failed at Msg4!\n", UE_id, ra->rnti);
}
nr_clear_ra_proc(module_id, CC_id, frame, ra);
......@@ -1953,7 +1953,7 @@ void nr_check_Msg4_Ack(module_id_t module_id, int CC_id, frame_t frame, sub_fram
}
}
else {
LOG_I(NR_MAC, "(ue %i, rnti 0x%04x) Received Nack of RA-Msg4. Preparing retransmission!\n", UE_id, ra->rnti);
LOG_D(NR_MAC, "(ue %i, rnti 0x%04x) Received Nack of RA-Msg4. Preparing retransmission!\n", UE_id, ra->rnti);
ra->Msg4_frame = (frame + 1) % 1024;
ra->Msg4_slot = 1;
ra->state = Msg4;
......@@ -2010,7 +2010,7 @@ void nr_fill_rar(uint8_t Mod_idP,
uint8_t * dlsch_buffer,
nfapi_nr_pusch_pdu_t *pusch_pdu){
LOG_I(NR_MAC, "[gNB] Generate RAR MAC PDU frame %d slot %d preamble index %u TA command %d \n", ra->Msg2_frame, ra-> Msg2_slot, ra->preamble_index, ra->timing_offset);
LOG_D(NR_MAC, "[gNB] Generate RAR MAC PDU frame %d slot %d preamble index %u TA command %d \n", ra->Msg2_frame, ra-> Msg2_slot, ra->preamble_index, ra->timing_offset);
NR_RA_HEADER_BI *rarbi = (NR_RA_HEADER_BI *) dlsch_buffer;
NR_RA_HEADER_RAPID *rarh = (NR_RA_HEADER_RAPID *) (dlsch_buffer + 1);
NR_MAC_RAR *rar = (NR_MAC_RAR *) (dlsch_buffer + 2);
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_ulsch.c
View file @ 05c07c40
......@@ -756,20 +756,20 @@ void nr_rx_sdu(const module_id_t gnb_mod_idP,
continue;
if(no_sig) {
LOG_W(NR_MAC, "Random Access %i failed at state %i (no signal)\n", i, ra->state);
LOG_D(NR_MAC, "Random Access %i failed at state %i (no signal)\n", i, ra->state);
nr_mac_remove_ra_rnti(gnb_mod_idP, ra->rnti);
nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
} else {
// random access pusch with TC-RNTI
if (ra->rnti != current_rnti) {
LOG_W(NR_MAC,
LOG_D(NR_MAC,
"expected TC_RNTI %04x to match current RNTI %04x\n",
ra->rnti,
current_rnti);
if( (frameP==ra->Msg3_frame) && (slotP==ra->Msg3_slot) ) {
LOG_W(NR_MAC, "Random Access %i failed at state %i (TC_RNTI %04x RNTI %04x)\n", i, ra->state,ra->rnti,current_rnti);
LOG_D(NR_MAC, "Random Access %i failed at state %i (TC_RNTI %04x RNTI %04x)\n", i, ra->state,ra->rnti,current_rnti);
nr_mac_remove_ra_rnti(gnb_mod_idP, ra->rnti);
nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
}
......@@ -781,7 +781,7 @@ void nr_rx_sdu(const module_id_t gnb_mod_idP,
UE_id = add_new_nr_ue(gnb_mod_idP, ra->rnti, ra->CellGroup);
if (UE_id<0) {
LOG_W(NR_MAC, "Random Access %i discarded at state %i (TC_RNTI %04x RNTI %04x): max number of users achieved!\n", i, ra->state,ra->rnti,current_rnti);
LOG_D(NR_MAC, "Random Access %i discarded at state %i (TC_RNTI %04x RNTI %04x): max number of users achieved!\n", i, ra->state,ra->rnti,current_rnti);
nr_mac_remove_ra_rnti(gnb_mod_idP, ra->rnti);
nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
return;
......@@ -877,20 +877,20 @@ void nr_rx_sdu(const module_id_t gnb_mod_idP,
// for CFRA (NSA) do not schedule retransmission of msg3
if (ra->cfra) {
LOG_W(NR_MAC, "Random Access %i failed at state %i (NSA msg3 reception failed)\n", i, ra->state);
LOG_D(NR_MAC, "Random Access %i failed at state %i (NSA msg3 reception failed)\n", i, ra->state);
nr_mac_remove_ra_rnti(gnb_mod_idP, ra->rnti);
nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
return;
}
if (ra->msg3_round >= MAX_HARQ_ROUNDS - 1) {
LOG_W(NR_MAC, "Random Access %i failed at state %i (Reached msg3 max harq rounds)\n", i, ra->state);
LOG_D(NR_MAC, "Random Access %i failed at state %i (Reached msg3 max harq rounds)\n", i, ra->state);
nr_mac_remove_ra_rnti(gnb_mod_idP, ra->rnti);
nr_clear_ra_proc(gnb_mod_idP, CC_idP, frameP, ra);
return;
}
LOG_W(NR_MAC, "Random Access %i Msg3 CRC did not pass)\n", i);
LOG_D(NR_MAC, "Random Access %i Msg3 CRC did not pass)\n", i);
ra->msg3_round++;
ra->state = Msg3_retransmission;
}
......
openair2/NR_PHY_INTERFACE/NR_IF_Module.c
View file @ 05c07c40
......@@ -77,7 +77,7 @@ void handle_nr_rach(NR_UL_IND_t *UL_info)
bool in_timewindow = frame_diff == 0 || (frame_diff == 1 && UL_info->slot < 7);
if (UL_info->rach_ind.number_of_pdus > 0 && in_timewindow) {
LOG_A(MAC,"UL_info[Frame %d, Slot %d] Calling initiate_ra_proc RACH:SFN/SLOT:%d/%d\n",
LOG_D(MAC,"UL_info[Frame %d, Slot %d] Calling initiate_ra_proc RACH:SFN/SLOT:%d/%d\n",
UL_info->frame, UL_info->slot, UL_info->rach_ind.sfn, UL_info->rach_ind.slot);
for (int i = 0; i < UL_info->rach_ind.number_of_pdus; i++) {
UL_info->rach_ind.number_of_pdus--;
......
openair2/RRC/NR/MESSAGES/asn1_msg.c
View file @ 05c07c40
......@@ -1783,14 +1783,14 @@ void update_cellGroupConfig(NR_CellGroupConfig_t *cellGroupConfig,
NR_BWP_DownlinkDedicated_t *bwp_Dedicated = SpCellConfig->spCellConfigDedicated->initialDownlinkBWP;
set_dl_mcs_table(scc->downlinkConfigCommon->initialDownlinkBWP->genericParameters.subcarrierSpacing,
uecap, SpCellConfig, bwp_Dedicated, scc);
NULL/*uecap*/, SpCellConfig, bwp_Dedicated, scc);
struct NR_ServingCellConfig__downlinkBWP_ToAddModList *DL_BWP_list = SpCellConfig->spCellConfigDedicated->downlinkBWP_ToAddModList;
if (DL_BWP_list) {
for (int i=0; i<DL_BWP_list->list.count; i++){
NR_BWP_Downlink_t *bwp = DL_BWP_list->list.array[i];
int scs = bwp->bwp_Common->genericParameters.subcarrierSpacing;
set_dl_mcs_table(scs, uecap, SpCellConfig,bwp->bwp_Dedicated, carrier->servingcellconfigcommon);
set_dl_mcs_table(scs, NULL,/*uecap,*/ SpCellConfig,bwp->bwp_Dedicated, carrier->servingcellconfigcommon);
}
}
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment