* update the lte_rate_matching for rx (temporarily)

* update the oai performance test cases
* update ulsim and dlsim for automatic logging for performance testing



git-svn-id: http://svn.eurecom.fr/openair4G/trunk@5343 818b1a75-f10b-46b9-bf7c-635c3b92a50f

openair-cn/README

@@ -62,11 +62,11 @@ The MME needs some libraries and tools:
 S1AP/MESSAGES/ASN1)
 - flex
 - bison
-
 To install the dependencies:
 sudo apt-get install libsctp-dev libpthread-dev flex bison g++ gcc make -y
+
 A script is present in S6A/freediameter to install required packages for
-S6A interface over diameter
+S6A interface over diameter. Run it as a sudoer.   
 
 install_openvswitch1.9.0.bash
 cd S6A/freediameter/README

openair-cn/S1AP/s1ap_eNB_nas_procedures.c

@@ -263,9 +263,10 @@ int s1ap_eNB_handle_nas_downlink(const uint32_t               assoc_id,
         /* We already have a mme ue s1ap id check the received is the same */
         if (ue_desc_p->mme_ue_s1ap_id != downlink_NAS_transport_p->mme_ue_s1ap_id) {
             S1AP_ERROR("[SCTP %d] Mismatch in MME UE S1AP ID (0x%08x != 0x%08x)\n",
+                       assoc_id,
 		       downlink_NAS_transport_p->mme_ue_s1ap_id,
-                       ue_desc_p->mme_ue_s1ap_id,
-                       assoc_id);
+                       ue_desc_p->mme_ue_s1ap_id
+                       );
         }
     }
 

openair-cn/S6A/freediameter/install_freediameter.sh

@@ -95,7 +95,7 @@ if [ -d freeDiameter-1.1.5/ ]
 fi
 
 wget http://www.freediameter.net/hg/freeDiameter/archive/1.1.5.tar.gz > install_log.txt
-tar -xf 1.1.5.tar.gz > install_log.txt
+tar -xzf 1.1.5.tar.gz > install_log.txt
 echo "Uncompressing freeDiameter archive"
 cd freeDiameter-1.1.5
 patch -p1 < $CURRENT_PATH/freediameter-1.1.5.patch > install_log.txt

openair1/PHY/CODING/lte_rate_matching.c

@@ -691,7 +691,8 @@ int lte_rate_matching_turbo_rx(uint32_t RTC,
   if (clear==1)
     memset(w,0,Ncb*sizeof(int16_t));
  
-  soft_input2 = soft_input + (r*E);
+  //soft_input2 = soft_input + (r*E);
+  soft_input2 = soft_input; // navid
   k=0;
 
   for (;(ind<Ncb)&&(k<E);ind++) {

openair1/PHY/INIT/lte_init.c

@@ -366,11 +366,15 @@ void phy_config_dedicated_eNB_step2(PHY_VARS_eNB *phy_vars_eNB) {
 	  phy_vars_eNB->pucch_config_dedicated[UE_id].ackNackRepetition=1;
 	}
 	
+        if (phy_vars_eNB->lte_frame_parms.frame_type == FDD) {
+          phy_vars_eNB->pucch_config_dedicated[UE_id].tdd_AckNackFeedbackMode = multiplexing;
+        } 
+        else {
           if (physicalConfigDedicated->pucch_ConfigDedicated->tdd_AckNackFeedbackMode)
             phy_vars_eNB->pucch_config_dedicated[UE_id].tdd_AckNackFeedbackMode = *physicalConfigDedicated->pucch_ConfigDedicated->tdd_AckNackFeedbackMode;
           else
             phy_vars_eNB->pucch_config_dedicated[UE_id].tdd_AckNackFeedbackMode = bundling;
-	
+        }
 	if ( phy_vars_eNB->pucch_config_dedicated[UE_id].tdd_AckNackFeedbackMode == multiplexing)
 	  LOG_D(PHY,"pucch_config_dedicated.tdd_AckNackFeedbackMode = multiplexing\n");
 	else
@@ -1433,7 +1437,7 @@ int phy_init_lte_eNB(PHY_VARS_eNB *phy_vars_eNB,
 
     phy_vars_eNB->eNB_UE_stats[UE_id].total_TBS = 0;
     phy_vars_eNB->eNB_UE_stats[UE_id].total_TBS_last = 0;
-    phy_vars_eNB->eNB_UE_stats[UE_id].total_TBS_MAC = 0;
+    //    phy_vars_eNB->eNB_UE_stats[UE_id].total_TBS_MAC = 0;
     phy_vars_eNB->eNB_UE_stats[UE_id].dlsch_bitrate = 0;
 
     phy_vars_eNB->physicalConfigDedicated[UE_id] = NULL;

openair1/PHY/LTE_ESTIMATION/lte_ul_channel_estimation.c

@@ -94,7 +94,7 @@ int32_t lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,
 		  phy_vars_eNB->ulsch_eNB[UE_id]->harq_processes[harq_pid]->n_DMRS2 +
 		  frame_parms->pusch_config_common.ul_ReferenceSignalsPUSCH.nPRS[(subframe<<1)+Ns]) % 12;
 
-#ifdef USER_MODE
+#if defined(USER_MODE) 
   Msc_idx_ptr = (uint16_t*) bsearch(&Msc_RS, dftsizes, 33, sizeof(uint16_t), compareints);
   if (Msc_idx_ptr)
     Msc_RS_idx = Msc_idx_ptr - dftsizes;
@@ -437,6 +437,7 @@ int32_t lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,
 	  alpha = (int16_t) (((int32_t) SCALE * (int32_t) (pilot_pos2-k))/(pilot_pos2-pilot_pos1));
 	  beta  = (int16_t) (((int32_t) SCALE * (int32_t) (k-pilot_pos1))/(pilot_pos2-pilot_pos1));
 	  
+	  
 #ifdef DEBUG_CH
 	  msg("lte_ul_channel_estimation: k=%d, alpha = %d, beta = %d\n",k,alpha,beta); 
 #endif

openair1/PHY/LTE_TRANSPORT/defs.h

@@ -350,6 +350,8 @@ typedef struct {
   uint32_t B; 
   /// Length of ACK information (bits)
   uint8_t O_ACK;
+  /// The value of DAI in DCI format 0 
+  uint8_t V_UL_DAI;
   /// Pointer to the payload
   uint8_t *b;  
   /// Pointers to transport block segments

openair1/SIMULATION/LTE_PHY/dlsim.c

@@ -662,8 +662,12 @@ int main(int argc, char **argv) {
   fprintf(bler_fd,"SNR; MCS; TBS; rate; err0; trials0; err1; trials1; err2; trials2; err3; trials3; dci_err\n");
   
   if (test_perf != 0) {
-    sprintf(time_meas_fname,"%s/TEST/OAI/PERF/time_meas_prb%d_mcs%d_anttx%d_antrx%d_pdcch%d_channel%s_tx%d.csv",
-	    getenv("OPENAIR_TARGETS"),
+    char hostname[1024];
+    hostname[1023] = '\0';
+    gethostname(hostname, 1023);
+    printf("Hostname: %s\n", hostname);
+    sprintf(time_meas_fname,"%s/TEST/OAI/PERF_%s/time_meas_prb%d_mcs%d_anttx%d_antrx%d_pdcch%d_channel%s_tx%d.csv",
+	    getenv("OPENAIR_TARGETS"),hostname,
 	    N_RB_DL,mcs,n_tx,n_rx,num_pdcch_symbols,channel_model_input,transmission_mode);
     time_meas_fd = fopen(time_meas_fname,"w");
   }

openair1/SIMULATION/LTE_PHY/ulsim.c

@@ -516,8 +516,12 @@ int main(int argc, char **argv) {
   fprintf(bler_fd,"#SNR;mcs;nb_rb;TBS;rate;errors[0];trials[0];errors[1];trials[1];errors[2];trials[2];errors[3];trials[3]\n");
 
   if (test_perf != 0) {
-    sprintf(time_meas_fname,"%s/TEST/OAI/PERF/time_meas_prb%d_mcs%d_antrx%d_channel%s_tx%d.csv",
-	    getenv("OPENAIR_TARGETS"),
+    char hostname[1024];
+    hostname[1023] = '\0';
+    gethostname(hostname, 1023);
+    printf("Hostname: %s\n", hostname);
+    sprintf(time_meas_fname,"%s/TEST/OAI/PERF_%s/time_meas_prb%d_mcs%d_antrx%d_channel%s_tx%d.csv",
+	    getenv("OPENAIR_TARGETS"),hostname,
 	    N_RB_DL,mcs,n_rx,channel_model_input,transmission_mode);
     time_meas_fd = fopen(time_meas_fname,"w");
   }

targets/SIMU/EXAMPLES/OSD/WEBXML/template_8.xml

@@ -30,7 +30,7 @@
     <PREDEFINED_TRAFFIC>
       <SOURCE_ID>1:3</SOURCE_ID> <!-- valid formats are: -->					
       <APPLICATION_TYPE>scbr</APPLICATION_TYPE> <!-- OPTIONS: scbr,mcbr,bcbr, gaming_OA, gaming_TF,  m2m_AP, m2m_BR, , random, ,full_buffer -->
-      <DESTINATION_ID>0</DESTINATION_ID> <!-- valid formats are: -->
+      <DESTINATION_ID>1:3</DESTINATION_ID> <!-- valid formats are: -->
     </PREDEFINED_TRAFFIC>
   </APPLICATION_CONFIG>
 

targets/TEST/OAI/case11.py

@@ -42,7 +42,7 @@ makerr1 = '***'
 makerr2 = 'Error 1'
 
 
-def execute(oai, user, pw, logfile,logdir,debug):
+def execute(oai, user, pw, host,logfile,logdir,debug):
     
     case = '101'
     rv  = 1; 
@@ -57,9 +57,10 @@ def execute(oai, user, pw, logfile,logdir,debug):
         tee = ' 2>&1 | tee ' + trace
         diag = 'check the compilation errors for dlsim in $OPENAIR1_DIR/SIMULATION/LTE_PHY'
         oai.send('make cleanall;')
-        oai.send('rm -f ./dlsim.rel8;')
+        oai.send('rm -f ./dlsim.rel8.'+host)
         oai.send_expect_false('make dlsim -j4' + tee, makerr1,  1500)
-        oai.send('cp ./dlsim ./dlsim.rel8;')
+        oai.send('cp ./dlsim ./dlsim.rel8.'+host)
+                   
     except log.err, e:
         log.fail(case, test, name, conf, e.value, diag, logfile,trace)
         rv =0
@@ -74,9 +75,9 @@ def execute(oai, user, pw, logfile,logdir,debug):
         tee = ' 2>&1 | tee ' + trace
         diag = 'check the compilation errors for ulsim in $OPENAIR1_DIR/SIMULATION/LTE_PHY'
         oai.send('make cleanall;')
-        oai.send('rm -f ./ulsim.rel8;')
+        oai.send('rm -f ./ulsim.rel8.'+host)
         oai.send_expect_false('make ulsim -j4' + tee, makerr1,  1500)
-        oai.send('cp ./ulsim ./ulsim.rel8;')
+        oai.send('cp ./ulsim ./ulsim.rel8.'+host)
     except log.err, e:
         log.fail(case, test, name, conf, e.value, diag, logfile,trace)
         rv = 0

targets/TEST/OAI/case12.py

@@ -48,8 +48,8 @@ NUM_UE=2
 NUM_eNB=1
 NUM_TRIALS=3
 
-PRB=[25]#,50,75,100]
-MCS=[4,5,7,9,12,15,18,21,24,27]
+PRB=[25,50,100]
+MCS=[0,4,9,10,13,16,17,22,27]
 ANT_TX=2  # 2 
 ANT_RX=2  # 2 
 PDCCH=2 #, 2, 3, 4
@@ -65,26 +65,26 @@ FRAME=500
 
 
 
-def execute(oai, user, pw, logfile,logdir,debug):
+def execute(oai, user, pw, host, logfile,logdir,debug):
     
-    case = '102'
+    case = '10'
     oai.send('cd $OPENAIR1_DIR;')     
     oai.send('cd SIMULATION/LTE_PHY;')   
     
     try:
-        test = '0'
+        test = '200'
         name = 'Run oai.dlsim.sanity'
         conf = '-a -n 100'
         diag = 'dlsim is not running normally (Segmentation fault / Exiting / FATAL), debugging might be needed'
-        trace = logdir + '/log_' + case + test + '_1.txt;'
+        trace = logdir + '/log_' + host + case + test + '_1.txt;'
         tee = ' 2>&1 | tee ' + trace
-        oai.send_expect_false('./dlsim.rel8 ' + conf + tee, 'Segmentation fault', 30)
-        trace = logdir + '/log_' + case + test + '_2.txt;'
+        oai.send_expect_false('./dlsim.rel8.'+ host + ' ' + conf + tee, 'Segmentation fault', 30)
+        trace = logdir + '/log_'  + host + case + test + '_2.txt;'
         tee = ' 2>&1 | tee ' + trace
-        oai.send_expect_false('./dlsim.rel8 ' + conf + tee, 'Exiting', 30)
-        trace = logdir + '/log_' + case + test + '_3.txt;'
+        oai.send_expect_false('./dlsim.rel8.'+ host + ' ' + conf + tee, 'Exiting', 30)
+        trace = logdir + '/log_'  + host + case + test + '_3.txt;'
         tee = ' 2>&1 | tee ' + trace
-        oai.send_expect_false('./dlsim.rel8 ' + conf + tee, 'FATAL', 30)
+        oai.send_expect_false('./dlsim.rel8.'+ host + ' ' + conf + tee, 'FATAL', 30)
 
     except log.err, e:
         log.fail(case, test, name, conf, e.value, diag, logfile,trace)
@@ -92,11 +92,12 @@ def execute(oai, user, pw, logfile,logdir,debug):
         log.ok(case, test, name, conf, '', logfile)
     
     try:
-        test = 1
-        MIN_SNR = 0
+        test = 210
+       
         name = 'Run oai.dlsim.perf.'+str(PERF)+'%'
         diag = 'no diagnostic is available, check the log file'
         for i in range(len(PRB)):
+            MIN_SNR = 0
             for j in range(len(MCS)):
                 for k in range(1,ANT_TX):
                     for m in range (1,ANT_RX):
@@ -106,12 +107,14 @@ def execute(oai, user, pw, logfile,logdir,debug):
                                     for q in range(MIN_SNR,MAX_SNR): 
                                         #if  if PRB[i] :
                                                                           
-                                        conf = '-B' + str(PRB[i]) + ' -m'+str(MCS[j]) + ' -y'+str(k) + ' -z'+str(m) +' -c'+str(n) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -f.1 -P -n'+str(FRAME)+' -O'+str(PERF) #+' '+ OPT    
+                                        conf = '-B' + str(PRB[i]) + ' -m'+str(MCS[j]) + ' -y'+str(k) + ' -z'+str(m) +' -c'+str(n) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -f.1 -P -n'+str(FRAME)+' -O'+str(PERF) +' '+ OPT    
                                         trace = logdir + '/time_meas' + '_prb'+str(PRB[i])+'_mcs'+ str(MCS[j])+ '_anttx' + str(k)+ '_antrx' + str(m)  + '_pdcch' + str(n) + '_channel' +str(CHANNEL[o]) + '_tx' +str(p) + '_snr' +str(q)+'.'+case+str(test)+ '.log'
                                         tee = ' 2>&1 | tee ' + trace
-                                        match = oai.send_expect_re('./dlsim.rel8 ' + conf + tee, 'passed', 0, 1000)
+                                        cmd = 'taskset -c 0 ./dlsim.rel8.'+ host + ' ' + conf + tee
                                         if debug : 
-                                            print conf
+                                            print cmd
+
+                                        match = oai.send_expect_re(cmd, 'passed', 0, 1000)
                                       
                                         if match :
                                             log.ok(case, str(test), name, conf, '', logfile)
@@ -132,7 +135,6 @@ def execute(oai, user, pw, logfile,logdir,debug):
                                         
                                        
                                                 
-                                        
     except log.err, e:
         log.fail(case, str(test), name, conf, e.value, diag, logfile,trace)
     #else:

targets/TEST/OAI/case13.py

@@ -48,8 +48,8 @@ NUM_UE=2
 NUM_eNB=1
 NUM_TRIALS=3
 
-PRB=[25]#,50,75,100]
-MCS=[4,5,7,9,12,15,18,21,24,27]
+PRB=[25,50,100]
+MCS=[0,4,9,10,13,16,17,22,27]
 ANT_TX=1  # 2 
 ANT_RX=2  # 2 
 CHANNEL=["N"] # A,B,C,D,E,F,
@@ -63,26 +63,26 @@ FRAME=500
 
 
 
-def execute(oai, user, pw, logfile,logdir,debug):
+def execute(oai, user, pw, host,logfile,logdir,debug):
     
-    case = '103'
+    case = '10'
     oai.send('cd $OPENAIR1_DIR;')     
     oai.send('cd SIMULATION/LTE_PHY;')   
     
     try:
-        test = '0'
+        test = '300'
         name = 'Run oai.ulsim.sanity'
         conf = '-a -n 100'
         diag = 'ulsim is not running normally (Segmentation fault / Exiting / FATAL), debugging might be needed'
-        trace = logdir + '/log_' + case + test + '_1.txt;'
+        trace = logdir + '/log_' + host + case + test + '_1.txt;'
         tee = ' 2>&1 | tee ' + trace
-        oai.send_expect_false('./ulsim.rel8 ' + conf + tee, 'Segmentation fault', 30)
-        trace = logdir + '/log_' + case + test + '_2.txt;'
+        oai.send_expect_false('./ulsim.rel8.'+ host + ' ' + conf + tee, 'Segmentation fault', 30)
+        trace = logdir + '/log_' + host + case + test + '_2.txt;'
         tee = ' 2>&1 | tee ' + trace
-        oai.send_expect_false('./ulsim.rel8 ' + conf + tee, 'Exiting', 30)
-        trace = logdir + '/log_' + case + test + '_3.txt;'
+        oai.send_expect_false('./ulsim.rel8.'+ host + ' ' + conf + tee, 'Exiting', 30)
+        trace = logdir + '/log_' + host + case + test + '_3.txt;'
         tee = ' 2>&1 | tee ' + trace
-        oai.send_expect_false('./ulsim.rel8 ' + conf + tee, 'FATAL', 30)
+        oai.send_expect_false('./ulsim.rel8.'+ host + ' ' + conf + tee, 'FATAL', 30)
 
     except log.err, e:
         log.fail(case, test, name, conf, e.value, diag, logfile,trace)
@@ -90,11 +90,11 @@ def execute(oai, user, pw, logfile,logdir,debug):
         log.ok(case, test, name, conf, '', logfile)
     
     try:
-        test = 1
-        MIN_SNR=2
+        test = 310
         name = 'Run oai.ulsim.perf.'+str(PERF)+'%'
         diag = 'no diagnostic is available, check the log file'
         for i in range(len(PRB)):
+            MIN_SNR=0
             for j in range(len(MCS)):
                 for m in range (1,ANT_RX):
                     for o in range(len(CHANNEL)):
@@ -102,12 +102,15 @@ def execute(oai, user, pw, logfile,logdir,debug):
                             for q in range(MIN_SNR,MAX_SNR): 
                                         #if  if PRB[i] :
                                 
-                                conf = '-B' + str(PRB[i]) + ' -m'+str(MCS[j]) + ' -y'+str(m) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -e.1 -P -n'+str(FRAME)+' -O'+str(PERF) #+' '+ OPT  
+                                conf = '-B' + str(PRB[i]) + ' -m'+str(MCS[j]) + ' -y'+str(m) + ' -g'+str(CHANNEL[o]) + ' -x'+str(p) + ' -s'+str(q) + ' -w1.0 -e.1 -P -n'+str(FRAME)+' -O'+str(PERF)+' '+ OPT  
                                 trace = logdir + '/time_meas' + '_prb'+str(PRB[i])+'_mcs'+ str(MCS[j])+ '_antrx' + str(m)  + '_channel' +str(CHANNEL[o]) + '_tx' +str(p) + '_snr' +str(q)+'.'+case+str(test)+ '.log'
                                 tee = ' 2>&1 | tee ' + trace
-                                match = oai.send_expect_re('./ulsim.rel8 ' + conf + tee, 'passed', 0, 1000)
+                                cmd = 'taskset -c 0 ./ulsim.rel8.'+ host + ' ' + conf + tee
+                                
                                 if debug :
-                                    print conf
+                                    print cmd
+                                
+                                match = oai.send_expect_re(cmd, 'passed', 0, 1000)
                                 
                                 if match :
                                     log.ok(case, str(test), name, conf, '', logfile)

targets/TEST/OAI/openair.py

@@ -187,7 +187,7 @@ class openair(core):
     def create_dir(self,dirname,debug) :
         if not os.path.exists(dirname) :
             try:
-                os.makedirs(dirname)
+                os.makedirs(dirname,0755)
             except OSError:
                 # There was an error on creation, so make sure we know about it
                 raise            

targets/TEST/OAI/test02.py

@@ -79,13 +79,14 @@ for arg in sys.argv:
         sys.exit()
     i= i + 1     
 
+host = os.uname()[1]
 # get the oai object
 oai = openair('localdomain','localhost')
 #start_time = time.time()  # datetime.datetime.now()
 try: 
     user = getpass.getuser()
     print '\n******* Note that the user <'+user+'> should be a sudoer *******\n'
-    print '******* Connecting to the localhost to perform the test *******\n'
+    print '******* Connecting to the localhost <'+host+'> to perform the test *******\n'
    
     if not pw :
         print "username: " + user 
@@ -104,10 +105,10 @@ except :
 
 test = 'test02'
 ctime=datetime.datetime.utcnow().strftime("%Y-%m-%d.%Hh%M")
-logdir = os.getcwd() + '/PERF';
+logdir = os.getcwd() + '/PERF_'+host;
 logfile = logdir+'/'+user+'.'+test+'.'+ctime+'.txt'  
-oai.send_nowait('mkdir -p -m 755' + logdir + ';')
-  
+#oai.send_nowait('mkdir -p -m 755' + logdir + ';')
+oai.create_dir(logdir,debug)  
 #print '=================start the ' + test + ' at ' + ctime + '=================\n'
 #print 'Results will be reported in log file : ' + logfile
 log.writefile(logfile,'====================start'+test+' at ' + ctime + '=======================\n')
@@ -121,10 +122,11 @@ if clean == 1 :
 
 # start te test cases 
 #compile 
-rv=case11.execute(oai, user, pw, logfile,logdir,debug)
+
+rv=case11.execute(oai, user, pw, host,logfile,logdir,debug)
 if rv != 0 :
-    case12.execute(oai, user, pw, logfile,logdir,debug)
-    case13.execute(oai, user, pw, logfile,logdir,debug)
+    case12.execute(oai, user, pw, host,logfile,logdir,debug)
+    case13.execute(oai, user, pw, host,logfile,logdir,debug)
 else :
     print 'Compilation error: skip case 12 and 13'