Fixing FDD for TM4

openair1/PHY/LTE_TRANSPORT/dci_tools.c

@@ -1586,7 +1586,7 @@ int generate_eNB_dlsch_params_from_dci(int frame,
 	  dlsch0_harq->mimo_mode   = DUALSTREAM_PUSCH_PRECODING;
 	  dlsch0_harq->pmi_alloc   = DL_pmi_single;
 	  dlsch1_harq->mimo_mode   = DUALSTREAM_PUSCH_PRECODING;
-	  dlsch1_harq->pmi_alloc   = DL_pmi_single; //this is actually never used, since the PMI for the second codeword is always the opposote of the first one
+	  dlsch1_harq->pmi_alloc   = DL_pmi_single; 
 	  break;
 	default:
 	  break;
@@ -3337,7 +3337,8 @@ int dump_dci(LTE_DL_FRAME_PARMS *frame_parms, DCI_ALLOC_t *dci)
           break;
 
         case 25:
-          LOG_D(PHY,"DCI format2 2 antennas (FDD, 5 MHz), rnti %x (%x): rah %d, rb_alloc %x, mcs %d, harq_pid %d, ndi %d, RV %d, TPC %d\n",
+          //LOG_D
+          printf("DCI format2 2 antennas (FDD, 5 MHz), rnti %x (%x): rah %d, rb_alloc %x, mcs1 %d, mcs2 %d, harq_pid %d, ndi1 %d, ndi2 %d, RV1 %d, RV2 %d, swap %d, TPMI %d, TPC %d\n",
                 dci->rnti,
                 ((uint32_t*)&dci->dci_pdu)[0],
                 ((DCI2_5MHz_2A_FDD_t *)&dci->dci_pdu[0])->rah,
@@ -4772,8 +4773,10 @@ int generate_ue_dlsch_params_from_dci(int frame,
       return(-1);
     }
 
-
+    if (frame_type == TDD)
       tbswap = ((DCI2_5MHz_2A_TDD_t *)dci_pdu)->tb_swap;
+    else
+      tbswap = ((DCI2_5MHz_2A_FDD_t *)dci_pdu)->tb_swap;
 
     if (tbswap == 0) {
       dlsch0 = dlsch[0];

openair1/PHY/LTE_TRANSPORT/dlsch_modulation.c

@@ -776,9 +776,7 @@ int allocate_REs_in_RB(LTE_DL_FRAME_PARMS *frame_parms,
       else if ((mimo_mode >= DUALSTREAM_UNIFORM_PRECODING1)&&(mimo_mode <= DUALSTREAM_PUSCH_PRECODING)) {
 	// this is for transmission mode 4 (1 layer)
 	*re_allocated = *re_allocated + 1;	         
-	//amp = (int16_t)(((int32_t)tmp_amp*ONE_OVER_SQRT2_Q15)>>15);
-	amp = tmp_amp/2;
-	gain_lin_QPSK = (int16_t)((amp*ONE_OVER_SQRT2_Q15)>>15);
+
 
 	if (precoder_index==0) {
 	  precoder_index0 = 0; //[1 1]

openair1/SIMULATION/LTE_PHY/dlsim.c

@@ -1785,7 +1785,7 @@ n(tikz_fname,"w");
 	  }
 	  
 	   printf ("TM4 with tpmi =%d\n", ((DCI2_5MHz_2A_TDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi);    
-	   if (((DCI2_5MHz_2A_TDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi == 2) { 
+	   if ((((DCI2_5MHz_2A_TDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi == 2) || (((DCI2_5MHz_2A_FDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi == 2)) { 
 
 	    PHY_vars_eNB->eNB_UE_stats[0].DL_pmi_single = (unsigned short)(taus()&0xffff);
 	    
@@ -2771,7 +2771,7 @@ n(tikz_fname,"w");
 	      }
 	      
 	      
-	      if (transmission_mode==4 && (((DCI2_5MHz_2A_TDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi == 2)){
+	      if (transmission_mode==4 && ((((DCI2_5MHz_2A_TDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi == 2) ||(((DCI2_5MHz_2A_FDD_t *)&DLSCH_alloc_pdu_1[k])->tpmi == 2))){
 		PHY_vars_eNB->dlsch_eNB[0][0]->harq_processes[0]->pmi_alloc = quantize_subband_pmi(&PHY_vars_UE->PHY_measurements,0,PHY_vars_eNB->lte_frame_parms.N_RB_DL);
 		PHY_vars_UE->dlsch_ue[0][0]->pmi_alloc = quantize_subband_pmi(&PHY_vars_UE->PHY_measurements,0,PHY_vars_UE->lte_frame_parms.N_RB_DL);
 	      }