Skip to content

O
OpenXG-RAN
Commit 2efdbc16 authored by zzha zzha's avatar zzha zzha
Browse files
Options

Update gnb.sa.band78.fr1.106PRB.usrpb210.conf

parent ec78173f
Pipeline #246 failed with stages
      Show whitespace changes
      Inline Side-by-side
      Showing with 126 additions and 124 deletions
      targets/PROJECTS/GENERIC-NR-5GC/CONF/gnb.sa.band78.fr1.106PRB.usrpb210.conf
      View file @ 2efdbc16
      ...@@ -2,7 +2,7 @@ Active_gNBs = ( "gNB-OpenXG"); ...@@ -2,7 +2,7 @@ Active_gNBs = ( "gNB-OpenXG");
      # Asn1_verbosity, choice in: none, info, annoying # Asn1_verbosity, choice in: none, info, annoying
      Asn1_verbosity = "none"; Asn1_verbosity = "none";
      gNBs = gNBs = #设备的部署类型
      ( (
      { {
      ////////// Identification parameters: ////////// Identification parameters:
      ...@@ -11,29 +11,29 @@ gNBs = ...@@ -11,29 +11,29 @@ gNBs =
      // Tracking area code, 0x0000 and 0xfffe are reserved values // Tracking area code, 0x0000 and 0xfffe are reserved values
      tracking_area_code = 100; tracking_area_code = 100;
      plmn_list = ({ plmn_list = ({ #公共陆地移动网（Public Land Mobile Network，简称：PLMN），由政府或它所批准的经营者，为公众提供陆地移动通信业务目的而建立和经营的网络。PLMN = MCC + MNC
      mcc = 466; mcc = 466; //MCC 是 Mobile Country Code 的缩写，译为移动国家代码。它由三位数字组成。用于标识一个国家，但一个国家可以被分配多个 MCC 。比如美国的 MCC 有 310，311，和316。中国的 MCC 只有 460。
      mnc = 92; mnc = 92; //6X～9X（X=0～9）备用
      mnc_length = 2; mnc_length = 2; //MNC 是 Mobile Network Code 的缩写，译为移动网络代码。它由二到三位数字组成。它和 MCC 合在一起唯一标识一个移动网络提供者。
      snssaiList = ( snssaiList = ( #网络切片选择辅助信息.。5G用户在开户时候会在UDM上签约一个或者多个S-NSSAI，可以认为就是签约一个或者多个切片。5G中断接入网络时候携带这些S-NSSAI，网络根据情况将将终端接入相应切片。
      { {
      sst = 1; sst = 1; #适合处理5G增强的移动宽带。
      } }
      ); );
      }); });
      nr_cellid = 12345678L; nr_cellid = 12345678L; #5G(NR) Cell Identity : gNB标识(gNB ID)+Cell标识(CI)长度: 36 bits 取值: 0 to 68719476735
      ////////// Physical parameters: ////////// Physical parameters: #物理参数：
      ssb_SubcarrierOffset = 0; ssb_SubcarrierOffset = 0; #sb-SubcarrierOffset判定子载波偏置，其取值范围0~15，如果该值不大于11，UE则认为该小区配置了系统消息SIB1，否则SIB1承载内容不以系统消息方式出现。
      pdsch_AntennaPorts = 1; pdsch_AntennaPorts = 1; #物理下行共享信道的天线接口数
      pusch_AntennaPorts = 1; pusch_AntennaPorts = 1; #物理上行共享信道的天线接口数
      min_rxtxtime = 6; min_rxtxtime = 6;
      sib1_tda = 0; sib1_tda = 0; #sib 评估UE是否被允许访问小区 ,，tda 拓扑结构分析，一种探索数据的“形状”的EDA方法,一组分析方法构成的一个大的领域，包括了数据的统计分析，数据的可视化，数据采样等基本技术，其基本目的是使用各种方式直观地描述数据集背后的基本属性。
      pdcch_ConfigSIB1 = ( pdcch_ConfigSIB1 = ( #配置SIB1 Type0-PDCCH公共搜索空间的控制资源集CORESET和监听时机SearchSpace。
      { {
      controlResourceSetZero = 12; controlResourceSetZero = 12;
      searchSpaceZero = 0; searchSpaceZero = 0;
      ...@@ -44,126 +44,128 @@ gNBs = ...@@ -44,126 +44,128 @@ gNBs =
      { {
      #spCellConfigCommon #spCellConfigCommon
      physCellId = 0; physCellId = 0; #源PCell的物理小区标识
      # downlinkConfigCommon # downlinkConfigCommon #下行信道配置
      #frequencyInfoDL #frequencyInfoDL
      # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP) # this is 3600 MHz + 43 PRBs@30kHz SCS (same as initial BWP)
      absoluteFrequencySSB = 641280; absoluteFrequencySSB = 641280; #同步信号模块的频点位置
      dl_frequencyBand = 78; dl_frequencyBand = 78; #下行信道额频率波段
      # this is 3600 MHz # this is 3600 MHz
      dl_absoluteFrequencyPointA = 640008; dl_absoluteFrequencyPointA = 640008; # 表示A 点的频率位置的所有其他情况，以 ARFCN 表示用于副载波间隔配置的公共资源块 0 的副载波 0 的中心 μ 与“点 A”重合。
      #scs-SpecificCarrierList #scs-SpecificCarrierList
      dl_offstToCarrier = 0; dl_offstToCarrier = 0; # 偏移到载波 WP不是简单的以到Point A的距离计算，因为bandwidth不一定以PointA为起点，而是有个OffsetToCarrier
      # subcarrierSpacing # subcarrierSpacing
      # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      dl_subcarrierSpacing = 1; dl_subcarrierSpacing = 1; #子载波间隔
      dl_carrierBandwidth = 106; dl_carrierBandwidth = 106; #载波带宽
      #initialDownlinkBWP #initialDownlinkBWP
      #genericParameters #genericParameters
      # this is RBstart=27,L=48 (275*(L-1))+RBstart # this is RBstart=27,L=48 (275*(L-1))+RBstart
      initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952 initialDLBWPlocationAndBandwidth = 28875; # 6366 12925 12956 28875 12952 #初始BWP的RB起始位置和RB数。通过公式可以计算得到BWP的起始位置和RB数，起始位置的参考点为Point A。
      # subcarrierSpacing # subcarrierSpacing
      # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      initialDLBWPsubcarrierSpacing = 1; initialDLBWPsubcarrierSpacing = 1; #初始化子载波的间隔
      #pdcch-ConfigCommon #pdcch-ConfigCommon
      initialDLBWPcontrolResourceSetZero = 12; initialDLBWPcontrolResourceSetZero = 12; #初始 DLBWP 控制资源，告诉了我们PDCCH的时频资源大小（频域上占据的RB个数和时域上占据的符号个数），并没有告诉我们CORESET的起始符号位置，已及UE的监听周期等其他信息。
      initialDLBWPsearchSpaceZero = 0; initialDLBWPsearchSpaceZero = 0; #初始 DLBWP 搜索间隔，可能减少限制调度器，并同时希望限制终端盲检的尝试最大次数，就定义了所谓的Search Space：一组候选的控制信道（candidate control channels）集合CCE，它们以一定的等级聚合，终端试图对它们进行解码。
      #uplinkConfigCommon #uplinkConfigCommon
      #frequencyInfoUL #frequencyInfoUL
      ul_frequencyBand = 78; ul_frequencyBand = 78; #上行信道额频率波段
      #scs-SpecificCarrierList #scs-SpecificCarrierList
      ul_offstToCarrier = 0; ul_offstToCarrier = 0; #Point A的距离计算
      # subcarrierSpacing # subcarrierSpacing
      # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      ul_subcarrierSpacing = 1; ul_subcarrierSpacing = 1; #子载波间隔
      ul_carrierBandwidth = 106; ul_carrierBandwidth = 106; ##载波带宽
      pMax = 20; pMax = 20;
      #initialUplinkBWP #initialUplinkBWP
      #genericParameters #genericParameters
      initialULBWPlocationAndBandwidth = 28875; initialULBWPlocationAndBandwidth = 28875; #初始BWP的RB起始位置和RB数。
      # subcarrierSpacing # subcarrierSpacing
      # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      initialULBWPsubcarrierSpacing = 1; initialULBWPsubcarrierSpacing = 1; #初始化子载波的间隔
      #rach-ConfigCommon #rach-ConfigCommon
      #rach-ConfigGeneric #rach-ConfigGeneric
      prach_ConfigurationIndex = 98; prach_ConfigurationIndex = 98; #指定了用于UE进行随机接入的PRACH配置
      #prach_msg1_FDM #prach_msg1_FDM
      #0 = one, 1=two, 2=four, 3=eight #0 = one, 1=two, 2=four, 3=eight
      prach_msg1_FDM = 0; prach_msg1_FDM = 0; #随机接入信道消息1的频分复用（FDM）配置为one。
      prach_msg1_FrequencyStart = 0; prach_msg1_FrequencyStart = 0; #表示PRACH消息1的起始频率为0。
      zeroCorrelationZoneConfig = 13; zeroCorrelationZoneConfig = 13; #指定了零相关性区域配置为13。
      preambleReceivedTargetPower = -96; preambleReceivedTargetPower = -96; #表示接收到前导码的目标功率为-96 dB。
      #preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200) #preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
      preambleTransMax = 6; preambleTransMax = 6; #用于指定最大允许的前导码传输次数8
      #powerRampingStep #powerRampingStep
      # 0=dB0,1=dB2,2=dB4,3=dB6 # 0=dB0,1=dB2,2=dB4,3=dB6
      powerRampingStep = 1; powerRampingStep = 1; #表示在发送初始接入信令时，发射机每次增加功率的步长。功率每次增加2 dB。
      #ra_ReponseWindow #ra_ReponseWindow
      #1,2,4,8,10,20,40,80 #1,2,4,8,10,20,40,80
      ra_ResponseWindow = 4; ra_ResponseWindow = 4;#随机接入请求后等待接收到响应的时间窗口大小，等待时间为8个时隙。
      #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR #ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
      #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen #1=oneeighth,2=onefourth,3=half,4=one,5=two,6=four,7=eight,8=sixteen
      ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4; ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR = 4;#表示每个SSB上用于随机接入的前导码数量。表示每个SSB上有一个预备前导。
      #oneHalf (0..15) 4,8,12,16,...60,64 #oneHalf (0..15) 4,8,12,16,...60,64
      ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14; ssb_perRACH_OccasionAndCB_PreamblesPerSSB = 14;表示每个SSB上用于随机接入的前导数量。表示每个SSB上有14个前导。
      #ra_ContentionResolutionTimer #ra_ContentionResolutionTimer
      #(0..7) 8,16,24,32,40,48,56,64 #(0..7) 8,16,24,32,40,48,56,64
      ra_ContentionResolutionTimer = 7; ra_ContentionResolutionTimer = 7;#冲突分辨定时器，用于解决随机接入冲突的定时器时间。表示定时器时间为64个时隙。
      rsrp_ThresholdSSB = 19; rsrp_ThresholdSSB = 19;#SSB的参考信号强度门限，用于判断设备是否可以成功同步到SSB的参考信号强度门限。表示设备需要达到的参考信号强度阈值为-114 dBm。
      #prach-RootSequenceIndex_PR #prach-RootSequenceIndex_PR
      #1 = 839, 2 = 139 #1 = 839, 2 = 139
      prach_RootSequenceIndex_PR = 2; prach_RootSequenceIndex_PR = 2; #PRACH根序列索引，PRACH根序列的索引号
      prach_RootSequenceIndex = 1; prach_RootSequenceIndex = 1; #PRACH根序列索引
      # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
      # #
      msg1_SubcarrierSpacing = 1, msg1_SubcarrierSpacing = 1, #msg1消息的子载波间隔,子载波间隔为15
      # restrictedSetConfig # restrictedSetConfig
      # 0=unrestricted, 1=restricted type A, 2=restricted type B # 0=unrestricted, 1=restricted type A, 2=restricted type B
      restrictedSetConfig = 0, restrictedSetConfig = 0, # 受限配置集，用来指定受限的配置类型,未受限制
      msg3_DeltaPreamble = 1; msg3_DeltaPreamble = 1; #msg3消息的前导增益
      p0_NominalWithGrant =-90; p0_NominalWithGrant =-90; #分配的标称功率
      # pucch-ConfigCommon setup : # pucch-ConfigCommon setup :
      # pucchGroupHopping # pucchGroupHopping
      # 0 = neither, 1= group hopping, 2=sequence hopping # 0 = neither, 1= group hopping, 2=sequence hopping
      pucchGroupHopping = 0; pucchGroupHopping = 0; #PUCCH组跳变，用于指定PUCCH的组跳变类型
      hoppingId = 40; hoppingId = 40; # 跳变ID，用于指定跳变序列的ID
      p0_nominal = -90; p0_nominal = -90; # 标称功率，指定了PUCCH格式1/1a/1b的功率补偿值
      # ssb_PositionsInBurs_BitmapPR # ssb_PositionsInBurs_BitmapPR
      # 1=short, 2=medium, 3=long # 1=short, 2=medium, 3=long
      ssb_PositionsInBurst_PR = 2; ssb_PositionsInBurst_PR = 2; #SSB在一个时隙中的位置类型
      ssb_PositionsInBurst_Bitmap = 1; ssb_PositionsInBurst_Bitmap = 1; #SSB在一个时隙中的位置
      # ssb_periodicityServingCell # ssb_periodicityServingCell
      # 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 # 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1
      ssb_periodicityServingCell = 2; ssb_periodicityServingCell = 2; #服务小区的SSB周期性,20ms
      # dmrs_TypeA_position # dmrs_TypeA_position
      # 0 = pos2, 1 = pos3 # 0 = pos2, 1 = pos3
      dmrs_TypeA_Position = 0; dmrs_TypeA_Position = 0; #MRS类型A的位置，用于指定DMRS符号的位置,2
      # subcarrierSpacing # subcarrierSpacing
      # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      subcarrierSpacing = 1; subcarrierSpacing = 1; #子载波间隔，间隔大小
      #tdd-UL-DL-ConfigurationCommon #tdd-UL-DL-ConfigurationCommon
      # subcarrierSpacing # subcarrierSpacing
      # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120 # 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120
      referenceSubcarrierSpacing = 1; referenceSubcarrierSpacing = 1; #参考子载波间隔，用于指定参考信号的子载波间隔大小
      # pattern1 # pattern1
      # dl_UL_TransmissionPeriodicity # dl_UL_TransmissionPeriodicity
      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10 # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
      dl_UL_TransmissionPeriodicity = 6; dl_UL_TransmissionPeriodicity = 6; #下行/上行传输周期，5ms
      nrofDownlinkSlots = 7; nrofDownlinkSlots = 7; #下行时隙数
      nrofDownlinkSymbols = 6; nrofDownlinkSymbols = 6; #下行符号数
      nrofUplinkSlots = 2; nrofUplinkSlots = 2; #上行时隙数
      nrofUplinkSymbols = 4; nrofUplinkSymbols = 4; #上行符号数
      ssPBCH_BlockPower = -25; ssPBCH_BlockPower = -25; #SSPBCH块的功率
      } }
      ); );
      ...@@ -173,106 +175,106 @@ gNBs = ...@@ -173,106 +175,106 @@ gNBs =
      SCTP : SCTP :
      { {
      # Number of streams to use in input/output # Number of streams to use in input/output
      SCTP_INSTREAMS = 2; SCTP_INSTREAMS = 2; #:输入流数量，在输入方向上要使用的SCTP流的数量
      SCTP_OUTSTREAMS = 2; SCTP_OUTSTREAMS = 2; #输出流数量，在输出方向上要使用的SCTP流的数量
      }; };
      ////////// AMF parameters: ////////// AMF parameters: #AMF的IP地址设置
      amf_ip_address = ( { ipv4 = "172.11.200.14"; amf_ip_address = ( { ipv4 = "172.11.200.14"; #IPv4地址
      ipv6 = "192:168:30::17"; ipv6 = "192:168:30::17";#IPv6地址
      active = "yes"; active = "yes"; #激活状态
      preference = "ipv4"; preference = "ipv4"; #优先选择IPv4
      } }
      ); );
      NETWORK_INTERFACES : NETWORK_INTERFACES : #GNB（5G NR 基站）和NG（Next Generation）AMF（核心网功能处理器）的接口参数
      { {
      GNB_INTERFACE_NAME_FOR_NG_AMF = "eno1"; GNB_INTERFACE_NAME_FOR_NG_AMF = "eno1"; #GNB用于连接至NG AMF的接口名称
      GNB_IPV4_ADDRESS_FOR_NG_AMF = "docker-openxg"; GNB_IPV4_ADDRESS_FOR_NG_AMF = "docker-openxg"; #GNB用于连接至NG AMF的IPv4地址
      GNB_INTERFACE_NAME_FOR_NGU = "eno1"; GNB_INTERFACE_NAME_FOR_NGU = "eno1"; #GNB用于连接至NGU的接口名称
      GNB_IPV4_ADDRESS_FOR_NGU = "docker-openxg"; GNB_IPV4_ADDRESS_FOR_NGU = "docker-openxg"; #GNB用于连接至NGU的IPv4地址
      GNB_PORT_FOR_S1U = 2152; # Spec 2152 GNB_PORT_FOR_S1U = 2152; # Spec 2152 #用于S1U接口的端口号
      }; };
      } }
      ); );
      MACRLCs = ( MACRLCs = ( #MAC层逻辑信道
      { {
      num_cc = 1; num_cc = 1; #连接了一个载波
      tr_s_preference = "local_L1"; tr_s_preference = "local_L1"; #S传输信道的优先级在本地L1
      tr_n_preference = "local_RRC"; tr_n_preference = "local_RRC"; #N传输信道的优先级在本地RRC
      pusch_TargetSNRx10 = 150; pusch_TargetSNRx10 = 150; #目标信噪比
      pucch_TargetSNRx10 = 200; pucch_TargetSNRx10 = 200; #目标信噪比
      ulsch_max_frame_inactivity = 0; ulsch_max_frame_inactivity = 0; #UL-SCH的最大帧不活动时间为0
      } }
      ); );
      L1s = ( L1s = ( #物理层
      { {
      num_cc = 1; num_cc = 1; #连接了一个载波
      tr_n_preference = "local_mac"; tr_n_preference = "local_mac"; #传输信道N的优先级设置为"local_mac"，表示N传输信道的优先级在本地MAC层
      prach_dtx_threshold = 120; prach_dtx_threshold = 120; #阈值设置为120
      pucch0_dtx_threshold = 150; pucch0_dtx_threshold = 150; # DTX阈值设置为150
      ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0 ofdm_offset_divisor = 8; #set this to UINT_MAX for offset 0 #OFDM偏移因子除数，设置为8
      } }
      ); );
      RUs = ( RUs = ( #射频单元
      { {
      local_rf = "yes" local_rf = "yes" #本地射频
      nb_tx = 1 nb_tx = 1 #1跟发送天线
      nb_rx = 1 nb_rx = 1 #1跟接收天线
      att_tx = 0 att_tx = 0 #发送端衰减0
      att_rx = 0; att_rx = 0; #接收端衰减0
      bands = [78]; bands = [78]; #频段列表
      max_pdschReferenceSignalPower = -27; max_pdschReferenceSignalPower = -27; #:最大PDSCH参考信号功率设置为-27 dBm
      max_rxgain = 114; max_rxgain = 114; #最大接收增益设置为114
      sf_extension = 0; sf_extension = 0; #符号扩展
      eNB_instances = [0]; eNB_instances = [0]; #eNB实例列表
      #beamforming 1x4 matrix: #beamforming 1x4 matrix:
      bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000]; bf_weights = [0x00007fff, 0x0000, 0x0000, 0x0000]; #波束赋权矩阵，这里给出了一个1x4的矩阵值。
      clock_src = "internal"; clock_src = "internal"; #使用内部时钟源
      } }
      ); );
      THREAD_STRUCT = ( THREAD_STRUCT = (
      { {
      #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT" #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
      parallel_config = "PARALLEL_SINGLE_THREAD"; parallel_config = "PARALLEL_SINGLE_THREAD"; #单线程的并行配置
      #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE" #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
      worker_config = "WORKER_ENABLE"; worker_config = "WORKER_ENABLE"; #启用了工作器
      } }
      ); );
      rfsimulator : rfsimulator :
      { {
      serveraddr = "server"; serveraddr = "server"; #服务器server
      serverport = "4043"; serverport = "4043"; #端口id4043
      options = (); #("saviq"); or/and "chanmod" options = (); #("saviq"); or/and "chanmod" #
      modelname = "AWGN"; modelname = "AWGN"; #加性白噪声模型
      IQfile = "/tmp/rfsimulator.iqs"; IQfile = "/tmp/rfsimulator.iqs"; #路径
      }; };
      security = { security = {
      # preferred ciphering algorithms # preferred ciphering algorithms
      # the first one of the list that an UE supports in chosen # the first one of the list that an UE supports in chosen
      # valid values: nea0, nea1, nea2, nea3 # valid values: nea0, nea1, nea2, nea3
      ciphering_algorithms = ( "nea0" ); ciphering_algorithms = ( "nea0" ); #加密算法设置nea0
      # preferred integrity algorithms # preferred integrity algorithms
      # the first one of the list that an UE supports in chosen # the first one of the list that an UE supports in chosen
      # valid values: nia0, nia1, nia2, nia3 # valid values: nia0, nia1, nia2, nia3
      integrity_algorithms = ( "nia2", "nia0" ); integrity_algorithms = ( "nia2", "nia0" ); #首选的完整性算法是nia2，其次选择NIA0。
      # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter # setting 'drb_ciphering' to "no" disables ciphering for DRBs, no matter
      # what 'ciphering_algorithms' configures; same thing for 'drb_integrity' # what 'ciphering_algorithms' configures; same thing for 'drb_integrity'
      drb_ciphering = "yes"; drb_ciphering = "yes"; #启用DRB的加密功能
      drb_integrity = "no"; drb_integrity = "no"; #禁用DRB的完整性功能
      }; };
      log_config : log_config : #日志文件
      { {
      global_log_level ="info"; global_log_level ="info";
      global_log_verbosity ="medium"; global_log_verbosity ="medium";
      ......
      Markdown is supported
      0% or
      You are about to add 0 people to the discussion. Proceed with caution.
      Finish editing this message first!
      Please register or to comment