Skip to content

O
OpenXG-RAN
Commit 377bbaef authored by Florian Kaltenberger's avatar Florian Kaltenberger
Browse files
Options

Merge branch 'develop-nr-merge2-parallel' into 'develop-nr' 

Develop nr merge2 parallel

See merge request oai/openairinterface5g!443
parents 01aead2b d849dbd0
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1014 additions and 170 deletions
common/utils/LOG/vcd_signal_dumper.c
View file @ 377bbaef
......@@ -189,7 +189,17 @@ const char* eurecomVariablesNames[] = {
"ue0_trx_write_ns_missing",
"enb_thread_rxtx_CPUID",
"ru_thread_CPUID",
"ru_thread_tx_CPUID"
"ru_thread_tx_CPUID",
/*signal for NR*/
"frame_number_TX0_gNB",
"frame_number_TX1_gNB",
"frame_number_RX0_gNB",
"frame_number_RX1_gNB",
"subframe_number_TX0_gNB",
"subframe_number_TX1_gNB",
"subframe_number_RX0_gNB",
"subframe_number_RX1_gNB"
};
const char* eurecomFunctionsNames[] = {
......@@ -408,6 +418,10 @@ const char* eurecomFunctionsNames[] = {
"pdcch_interleaving",
"pdcch_tx",
/*NR softmodem signal*/
"gNB_thread_rxtx0",
"gNB_thread_rxtx1"
};
struct vcd_module_s vcd_modules[] = {
......
common/utils/LOG/vcd_signal_dumper.h
View file @ 377bbaef
......@@ -167,6 +167,17 @@ typedef enum {
VCD_SIGNAL_DUMPER_VARIABLES_CPUID_ENB_THREAD_RXTX,
VCD_SIGNAL_DUMPER_VARIABLES_CPUID_RU_THREAD,
VCD_SIGNAL_DUMPER_VARIABLES_CPUID_RU_THREAD_TX,
/*signal for NR*/
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX0_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_TX1_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_RX0_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_FRAME_NUMBER_RX1_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX0_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_TX1_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_RX0_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_SUBFRAME_NUMBER_RX1_GNB,
VCD_SIGNAL_DUMPER_VARIABLES_END
} vcd_signal_dump_variables;
......@@ -389,6 +400,10 @@ typedef enum {
VCD_SIGNAL_DUMPER_FUNCTIONS_PDCCH_INTERLEAVING,
VCD_SIGNAL_DUMPER_FUNCTIONS_PDCCH_TX,
/*NR softmodem signal*/
VCD_SIGNAL_DUMPER_FUNCTIONS_gNB_PROC_RXTX0,
VCD_SIGNAL_DUMPER_FUNCTIONS_gNB_PROC_RXTX1,
VCD_SIGNAL_DUMPER_FUNCTIONS_END
} vcd_signal_dump_functions;
......
common/utils/T/T_defs.h
View file @ 377bbaef
......@@ -41,10 +41,10 @@ typedef struct {
} T_cache_t;
/* number of VCD functions (to be kept up to date! see in T_messages.txt) */
#define VCD_NUM_FUNCTIONS 190
#define VCD_NUM_FUNCTIONS 192//190
/* number of VCD variables (to be kept up to date! see in T_messages.txt) */
#define VCD_NUM_VARIABLES 128
#define VCD_NUM_VARIABLES 136//128
/* first VCD function (to be kept up to date! see in T_messages.txt) */
#define VCD_FIRST_FUNCTION ((uintptr_t)T_VCD_FUNCTION_RT_SLEEP)
......
common/utils/T/T_messages.txt
View file @ 377bbaef
......@@ -1680,6 +1680,48 @@ ID = VCD_VARIABLE_CPUID_RU_THREAD_TX
FORMAT = ulong,value
VCD_NAME = ru_thread_tx_CPUID
#variable for gNB
ID = VCD_VARIABLE_FRAME_NUMBER_TX0_GNB
DESC = VCD variable FRAME_NUMBER_TX0_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = frame_number_TX0_gNB
ID = VCD_VARIABLE_FRAME_NUMBER_TX1_GNB
DESC = VCD variable FRAME_NUMBER_TX1_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = frame_number_TX1_gNB
ID = VCD_VARIABLE_FRAME_NUMBER_RX0_GNB
DESC = VCD variable FRAME_NUMBER_RX0_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = frame_number_RX0_gNB
ID = VCD_VARIABLE_FRAME_NUMBER_RX1_GNB
DESC = VCD variable FRAME_NUMBER_RX1_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = frame_number_RX1_gNB
ID = VCD_VARIABLE_SUBFRAME_NUMBER_TX0_GNB
DESC = VCD variable SUBFRAME_NUMBER_TX0_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = subframe_number_TX0_gNB
ID = VCD_VARIABLE_SUBFRAME_NUMBER_TX1_GNB
DESC = VCD variable SUBFRAME_NUMBER_TX1_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = subframe_number_TX1_gNB
ID = VCD_VARIABLE_SUBFRAME_NUMBER_RX0_GNB
DESC = VCD variable SUBFRAME_NUMBER_RX0_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = subframe_number_RX0_gNB
ID = VCD_VARIABLE_SUBFRAME_NUMBER_RX1_GNB
DESC = VCD variable SUBFRAME_NUMBER_RX1_GNB
GROUP = ALL:VCD:ENB:VCD_VARIABLE
FORMAT = ulong,value
VCD_NAME = subframe_number_RX1_gNB
#functions
ID = VCD_FUNCTION_RT_SLEEP
......@@ -2637,3 +2679,15 @@ ID = VCD_FUNCTION_PDCCH_TX
GROUP = ALL:VCD:ENB:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = pdcch_tx
#function for gNB
ID = VCD_FUNCTION_gNB_PROC_RXTX0
DESC = VCD function gNB_PROC_RXTX0
GROUP = ALL:VCD:ENB:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = gNB_thread_rxtx0
ID = VCD_FUNCTION_gNB_PROC_RXTX1
DESC = VCD function gNB_PROC_RXTX1
GROUP = ALL:VCD:ENB:VCD_FUNCTION
FORMAT = int,value
VCD_NAME = gNB_thread_rxtx1
openair1/PHY/NR_TRANSPORT/nr_dci.h
View file @ 377bbaef
......@@ -49,7 +49,7 @@ void nr_pdcch_scrambling(uint32_t *in,
void nr_fill_dci_and_dlsch(PHY_VARS_gNB *gNB,
int frame,
int subframe,
gNB_rxtx_proc_t *proc,
gNB_L1_rxtx_proc_t *proc,
NR_gNB_DCI_ALLOC_t *dci_alloc,
nfapi_nr_dl_config_request_pdu_t *pdu);
......
openair1/PHY/NR_TRANSPORT/nr_dci_tools.c
View file @ 377bbaef
......@@ -108,7 +108,7 @@ void nr_fill_cce_list(NR_gNB_DCI_ALLOC_t* dci_alloc, uint16_t n_shift, uint8_t m
void nr_fill_dci_and_dlsch(PHY_VARS_gNB *gNB,
int frame,
int subframe,
gNB_rxtx_proc_t *proc,
gNB_L1_rxtx_proc_t *proc,
NR_gNB_DCI_ALLOC_t *dci_alloc,
nfapi_nr_dl_config_request_pdu_t *pdu)
{
......
openair1/PHY/defs_gNB.h
View file @ 377bbaef
......@@ -99,22 +99,29 @@ typedef struct {
int frame_rx;
/// \brief Instance count for RXn-TXnp4 processing thread.
/// \internal This variable is protected by \ref mutex_rxtx.
int instance_cnt_rxtx;
int instance_cnt;
/// pthread structure for RXn-TXnp4 processing thread
pthread_t pthread_rxtx;
pthread_t pthread;
/// pthread attributes for RXn-TXnp4 processing thread
pthread_attr_t attr_rxtx;
pthread_attr_t attr;
/// condition variable for tx processing thread
pthread_cond_t cond_rxtx;
pthread_cond_t cond;
/// mutex for RXn-TXnp4 processing thread
pthread_mutex_t mutex_rxtx;
pthread_mutex_t mutex;
/// scheduling parameters for RXn-TXnp4 thread
struct sched_param sched_param_rxtx;
} gNB_rxtx_proc_t;
/// \internal This variable is protected by \ref mutex_RUs.
int instance_cnt_RUs;
/// condition variable for tx processing thread
pthread_cond_t cond_RUs;
/// mutex for RXn-TXnp4 processing thread
pthread_mutex_t mutex_RUs;
} gNB_L1_rxtx_proc_t;
/// Context data structure for eNB subframe processing
typedef struct gNB_proc_t_s {
typedef struct gNB_L1_proc_t_s {
/// Component Carrier index
uint8_t CC_id;
/// thread index
......@@ -181,17 +188,19 @@ typedef struct gNB_proc_t_s {
pthread_mutex_t mutex_asynch_rxtx;
/// mutex for RU access to eNB processing (PDSCH/PUSCH)
pthread_mutex_t mutex_RU;
/// mutex for RU_tx access to eNB_tx processing (PDSCH/PUSCH)
pthread_mutex_t mutex_RU_tx;
/// mutex for RU access to eNB processing (PRACH)
pthread_mutex_t mutex_RU_PRACH;
/// mutex for RU access to eNB processing (PRACH BR)
pthread_mutex_t mutex_RU_PRACH_br;
/// mask for RUs serving eNB (PDSCH/PUSCH)
int RU_mask;
int RU_mask, RU_mask_tx;
/// mask for RUs serving eNB (PRACH)
int RU_mask_prach;
/// set of scheduling variables RXn-TXnp4 threads
gNB_rxtx_proc_t proc_rxtx[2];
} gNB_proc_t;
gNB_L1_rxtx_proc_t L1_proc, L1_proc_tx;
} gNB_L1_proc_t;
......@@ -251,7 +260,7 @@ typedef struct PHY_VARS_gNB_s {
module_id_t Mod_id;
uint8_t CC_id;
uint8_t configured;
gNB_proc_t proc;
gNB_L1_proc_t proc;
int single_thread_flag;
int abstraction_flag;
int num_RU;
......
openair1/SCHED_NR/fapi_nr_l1.c
View file @ 377bbaef
......@@ -37,7 +37,7 @@ int oai_nfapi_tx_req(nfapi_tx_request_t *tx_req);
extern uint8_t nfapi_mode;
void handle_nr_nfapi_bch_pdu(PHY_VARS_gNB *gNB,
gNB_rxtx_proc_t *proc,
gNB_L1_rxtx_proc_t *proc,
nfapi_nr_dl_config_request_pdu_t *dl_config_pdu,
uint8_t *sdu)
{
......@@ -56,7 +56,7 @@ void handle_nr_nfapi_bch_pdu(PHY_VARS_gNB *gNB,
void handle_nfapi_nr_dci_dl_pdu(PHY_VARS_gNB *gNB,
int frame, int subframe,
gNB_rxtx_proc_t *proc,
gNB_L1_rxtx_proc_t *proc,
nfapi_nr_dl_config_request_pdu_t *dl_config_pdu)
{
int idx = subframe&1;
......@@ -73,7 +73,7 @@ void handle_nfapi_nr_dci_dl_pdu(PHY_VARS_gNB *gNB,
void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){
PHY_VARS_gNB *gNB;
gNB_rxtx_proc_t *proc;
gNB_L1_rxtx_proc_t *proc;
// copy data from L2 interface into L1 structures
module_id_t Mod_id = Sched_INFO->module_id;
uint8_t CC_id = Sched_INFO->CC_id;
......@@ -87,7 +87,7 @@ void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO){
AssertFatal(RC.gNB[Mod_id][CC_id]!=NULL,"RC.gNB[%d][%d] is null\n",Mod_id,CC_id);
gNB = RC.gNB[Mod_id][CC_id];
proc = &gNB->proc.proc_rxtx[0];
proc = &gNB->proc.L1_proc;
uint8_t number_dl_pdu = DL_req->dl_config_request_body.number_pdu;
......
openair1/SCHED_NR/fapi_nr_l1.h
View file @ 377bbaef
......@@ -41,5 +41,5 @@
void nr_schedule_response(NR_Sched_Rsp_t *Sched_INFO);
void handle_nfapi_nr_dci_dl_pdu(PHY_VARS_gNB *gNB,
int frame, int subframe,
gNB_rxtx_proc_t *proc,
gNB_L1_rxtx_proc_t *proc,
nfapi_nr_dl_config_request_pdu_t *dl_config_pdu);
openair1/SCHED_NR/phy_procedures_nr_gNB.c
View file @ 377bbaef
......@@ -152,7 +152,7 @@ void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int subframe) {
}
void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB,
gNB_rxtx_proc_t *proc,
gNB_L1_rxtx_proc_t *proc,
int do_meas)
{
int aa;
......
openair1/SCHED_NR/sched_nr.h
View file @ 377bbaef
......@@ -36,7 +36,7 @@
lte_subframe_t nr_subframe_select (nfapi_nr_config_request_t *cfg, unsigned char subframe);
void nr_set_ssb_first_subcarrier(nfapi_nr_config_request_t *cfg, NR_DL_FRAME_PARMS *fp);
void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, gNB_rxtx_proc_t *proc, int do_meas);
void phy_procedures_gNB_TX(PHY_VARS_gNB *gNB, gNB_L1_rxtx_proc_t *proc, int do_meas);
void nr_common_signal_procedures (PHY_VARS_gNB *gNB,int frame, int subframe);
void nr_init_feptx_thread(RU_t *ru,pthread_attr_t *attr_feptx);
void nr_feptx_ofdm(RU_t *ru);
......
openair2/GNB_APP/gnb_config.c
View file @ 377bbaef
......@@ -77,6 +77,10 @@
#include "NR_EUTRA-MBSFN-SubframeConfig.h"
extern uint16_t sf_ahead;
extern void set_parallel_conf(char *parallel_conf);
extern void set_worker_conf(char *worker_conf);
extern PARALLEL_CONF_t get_thread_parallel_conf(void);
extern WORKER_CONF_t get_thread_worker_conf(void);
void RCconfig_nr_flexran()
{
......@@ -290,7 +294,7 @@ void RCconfig_NR_L1(void) {
}
if(strcmp(*(L1_ParamList.paramarray[j][L1_TRANSPORT_N_PREFERENCE_IDX].strptr), "local_mac") == 0) {
sf_ahead = 2; // Need 4 subframe gap between RX and TX
//sf_ahead = 2; // Need 4 subframe gap between RX and TX
}else if (strcmp(*(L1_ParamList.paramarray[j][L1_TRANSPORT_N_PREFERENCE_IDX].strptr), "nfapi") == 0) {
RC.gNB[j][0]->eth_params_n.local_if_name = strdup(*(L1_ParamList.paramarray[j][L1_LOCAL_N_IF_NAME_IDX].strptr));
RC.gNB[j][0]->eth_params_n.my_addr = strdup(*(L1_ParamList.paramarray[j][L1_LOCAL_N_ADDRESS_IDX].strptr));
......@@ -301,7 +305,7 @@ void RCconfig_NR_L1(void) {
RC.gNB[j][0]->eth_params_n.remote_portd = *(L1_ParamList.paramarray[j][L1_REMOTE_N_PORTD_IDX].iptr);
RC.gNB[j][0]->eth_params_n.transp_preference = ETH_UDP_MODE;
sf_ahead = 2; // Cannot cope with 4 subframes betweem RX and TX - set it to 2
//sf_ahead = 2; // Cannot cope with 4 subframes betweem RX and TX - set it to 2
RC.nb_nr_macrlc_inst = 1; // This is used by mac_top_init_gNB()
......@@ -400,7 +404,7 @@ void RCconfig_nr_macrlc() {
RC.nrmac[j]->eth_params_s.remote_portd = *(MacRLC_ParamList.paramarray[j][MACRLC_REMOTE_S_PORTD_IDX].iptr);
RC.nrmac[j]->eth_params_s.transp_preference = ETH_UDP_MODE;
sf_ahead = 2; // Cannot cope with 4 subframes betweem RX and TX - set it to 2
//sf_ahead = 2; // Cannot cope with 4 subframes betweem RX and TX - set it to 2
printf("**************** vnf_port:%d\n", RC.mac[j]->eth_params_s.my_portc);
configure_nfapi_vnf(RC.nrmac[j]->eth_params_s.my_addr, RC.nrmac[j]->eth_params_s.my_portc);
......@@ -795,6 +799,10 @@ void RCconfig_NRRRC(MessageDef *msg_p, uint32_t i, gNB_RRC_INST *rrc) {
}
NRRRC_CONFIGURATION_REQ (msg_p).N_RB_DL[j]= N_RB_DL;
if(N_RB_DL == 217) sf_ahead = 2;
else if(N_RB_DL == 106) sf_ahead = 4;
else AssertFatal (0,"Failed to parse gNB configuration file %s, gnb %d unknown value \"%d\" for N_RB_DL choice: 106, 217 !\n",
RC.config_file_name, i, N_RB_DL);
/*
if ((N_RB_DL!=6) && (N_RB_DL!=15) && (N_RB_DL!=25) && (N_RB_DL!=50) && (N_RB_DL!=75) && (N_RB_DL!=100)) {
......@@ -2976,6 +2984,35 @@ int RCconfig_NR_S1(MessageDef *msg_p, uint32_t i) {
return 0;
}
int RCconfig_nr_parallel(void) {
char *parallel_conf = NULL;
char *worker_conf = NULL;
extern char *parallel_config;
extern char *worker_config;
paramdef_t ThreadParams[] = THREAD_CONF_DESC;
paramlist_def_t THREADParamList = {THREAD_CONFIG_STRING_THREAD_STRUCT,NULL,0};
config_getlist( &THREADParamList,NULL,0,NULL);
if(THREADParamList.numelt>0) {
config_getlist( &THREADParamList,ThreadParams,sizeof(ThreadParams)/sizeof(paramdef_t),NULL);
parallel_conf = strdup(*(THREADParamList.paramarray[0][THREAD_PARALLEL_IDX].strptr));
} else {
parallel_conf = strdup("PARALLEL_RU_L1_TRX_SPLIT");
}
if(THREADParamList.numelt>0) {
config_getlist( &THREADParamList,ThreadParams,sizeof(ThreadParams)/sizeof(paramdef_t),NULL);
worker_conf = strdup(*(THREADParamList.paramarray[0][THREAD_WORKER_IDX].strptr));
} else {
worker_conf = strdup("WORKER_ENABLE");
}
if(parallel_config == NULL) set_parallel_conf(parallel_conf);
if(worker_config == NULL) set_worker_conf(worker_conf);
return 0;
}
void NRRCConfig(void) {
paramlist_def_t MACRLCParamList = {CONFIG_STRING_MACRLC_LIST,NULL,0};
......@@ -3016,7 +3053,7 @@ void NRRCConfig(void) {
config_getlist( &RUParamList,NULL,0, NULL);
RC.nb_RU = RUParamList.numelt;
RCconfig_parallel();
RCconfig_nr_parallel();
}
openair2/GNB_APP/gnb_paramdef.h
View file @ 377bbaef
......@@ -1099,3 +1099,29 @@ typedef enum {
#define MACRLC_REMOTE_S_PORTD_IDX 16
#define MACRLC_SCHED_MODE_IDX 17
#define MACRLC_PHY_TEST_IDX 18
/* thread configuration parameters section name */
#define THREAD_CONFIG_STRING_THREAD_STRUCT "THREAD_STRUCT"
/* thread configuration parameters names */
#define THREAD_CONFIG_STRING_PARALLEL "parallel_config"
#define THREAD_CONFIG_STRING_WORKER "worker_config"
#define THREAD_PARALLEL_IDX 0
#define THREAD_WORKER_IDX 1
/*-------------------------------------------------------------------------------------------------------------------------------------------------------------*/
/* thread configuration parameters */
/* optname helpstr paramflags XXXptr defXXXval type numelt */
/*-------------------------------------------------------------------------------------------------------------------------------------------------------------*/
#define THREAD_CONF_DESC { \
{THREAD_CONFIG_STRING_PARALLEL, CONFIG_HLP_PARALLEL, 0, strptr:NULL, defstrval:"PARALLEL_RU_L1_TRX_SPLIT", TYPE_STRING, 0}, \
{THREAD_CONFIG_STRING_WORKER, CONFIG_HLP_WORKER, 0, strptr:NULL, defstrval:"WORKER_ENABLE", TYPE_STRING, 0} \
}
#define CONFIG_HLP_WORKER "coding and FEP worker thread WORKER_DISABLE or WORKER_ENABLE\n"
#define CONFIG_HLP_PARALLEL "PARALLEL_SINGLE_THREAD, PARALLEL_RU_L1_SPLIT, or PARALLEL_RU_L1_TRX_SPLIT(RU_L1_TRX_SPLIT by defult)\n"
/*-------------------------------------------------------------------------------------------------------------------------------------------------------------*/
targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.tm1.106PRB.usrpx300.conf
View file @ 377bbaef
......@@ -259,6 +259,15 @@ RUs = (
}
);
THREAD_STRUCT = (
{
#three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
parallel_config = "PARALLEL_RU_L1_TRX_SPLIT";
#two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
worker_config = "WORKER_DISABLE";
}
);
NETWORK_CONTROLLER :
{
FLEXRAN_ENABLED = "no";
......
targets/RT/USER/gNB_usrp.gtkw 0 → 100644
View file @ 377bbaef
[*]
[*] GTKWave Analyzer v3.3.58 (w)1999-2014 BSI
[*] Tue Nov 6 14:54:14 2018
[*]
[dumpfile] "/tmp/openair_dump_eNB.vcd"
[dumpfile_mtime] "Tue Nov 6 14:50:45 2018"
[dumpfile_size] 1894074
[savefile] "/homes/wangts/openairinterface5g/targets/RT/USER/gNB_usrp.gtkw"
[timestart] 1238454000
[size] 1920 1018
[pos] -159 -155
*-20.848083 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1
[sst_width] 386
[signals_width] 344
[sst_expanded] 1
[sst_vpaned_height] 421
@28
functions.trx_read
functions.trx_write
@24
variables.trx_ts[63:0]
variables.trx_tst[63:0]
@28
functions.eNB_thread_rxtx0
@24
variables.frame_number_RX0_RU[63:0]
variables.subframe_number_RX0_RU[63:0]
variables.frame_number_TX0_RU[63:0]
variables.subframe_number_TX0_RU[63:0]
@28
functions.mac_schedule_dlsch
functions.macxface_eNB_dlsch_ulsch_scheduler
functions.macxface_ue_scheduler
functions.phy_eNB_ofdm_mod_l
@24
variables.frame_number_RX0_gNB[63:0]
variables.subframe_number_RX0_gNB[63:0]
variables.frame_number_TX0_gNB[63:0]
variables.subframe_number_TX0_gNB[63:0]
@28
functions.gNB_thread_rxtx0
@24
variables.frame_number_RX1_gNB[63:0]
variables.subframe_number_RX1_gNB[63:0]
variables.frame_number_TX1_gNB[63:0]
variables.subframe_number_TX1_gNB[63:0]
@28
functions.gNB_thread_rxtx1
functions.phy_procedures_ru_feprx0
functions.phy_procedures_ru_feprx0
functions.phy_procedures_ru_feprx1
functions.phy_procedures_ru_feptx_ofdm0
functions.phy_procedures_ru_feptx_ofdm1
functions.phy_procedures_ru_feptx_prec0
functions.phy_procedures_ru_feptx_prec1
[pattern_trace] 1
[pattern_trace] 0
targets/RT/USER/nr-gnb.c
View file @ 377bbaef
This diff is collapsed.
targets/RT/USER/nr-ru.c
View file @ 377bbaef
This diff is collapsed.
targets/RT/USER/nr-softmodem.h
View file @ 377bbaef
......@@ -86,7 +86,10 @@
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
/***************************************************************************************************************************************/
/* command line options definitions, CMDLINE_XXXX_DESC macros are used to initialize paramdef_t arrays which are then used as argument
......@@ -167,8 +170,10 @@
{"P" , CONFIG_HLP_L2MONP, 0, strptr:(char **)&in_path, defstrval:"/tmp/oai_opt.pcap", TYPE_STRING, sizeof(in_path)}, \
{"q" , CONFIG_HLP_STMON, PARAMFLAG_BOOL, iptr:&opp_enabled, defintval:0, TYPE_INT, 0}, \
{"S" , CONFIG_HLP_MSLOTS, PARAMFLAG_BOOL, u8ptr:&exit_missed_slots, defintval:1, TYPE_UINT8, 0}, \
{"T" , CONFIG_HLP_TDD, PARAMFLAG_BOOL, iptr:&tddflag, defintval:0, TYPE_INT, 0}, \
{"T" , CONFIG_HLP_TDD, PARAMFLAG_BOOL, iptr:&tddflag, defintval:0, TYPE_INT, 0}, {"numerology" , CONFIG_HLP_NUMEROLOGY, PARAMFLAG_BOOL, iptr:&numerology, defintval:0, TYPE_INT, 0}, \
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, iptr:&emulate_rf, defintval:0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD,0, strptr:(char **)&parallel_config, defstrval:NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT,PARAMFLAG_BOOL, iptr:&nonbiotflag, defintval:0, TYPE_INT, 0} \
}
......
targets/RT/USER/nr-uesoftmodem.c
View file @ 377bbaef
......@@ -165,9 +165,31 @@ uint8_t nb_antenna_rx = 1;
char ref[128] = "internal";
char channels[128] = "0";
int codingw = 0;
int fepw = 0;
char *parallel_config = NULL;
char *worker_config = NULL;
static THREAD_STRUCT thread_struct;
void set_parallel_conf(char *parallel_conf)
{
if(strcmp(parallel_conf,"PARALLEL_SINGLE_THREAD")==0) thread_struct.parallel_conf = PARALLEL_SINGLE_THREAD;
else if(strcmp(parallel_conf,"PARALLEL_RU_L1_SPLIT")==0) thread_struct.parallel_conf = PARALLEL_RU_L1_SPLIT;
else if(strcmp(parallel_conf,"PARALLEL_RU_L1_TRX_SPLIT")==0) thread_struct.parallel_conf = PARALLEL_RU_L1_TRX_SPLIT;
printf("[CONFIG] parallel conf is set to %d\n",thread_struct.parallel_conf);
}
void set_worker_conf(char *worker_conf)
{
if(strcmp(worker_conf,"WORKER_DISABLE")==0) thread_struct.worker_conf = WORKER_DISABLE;
else if(strcmp(worker_conf,"WORKER_ENABLE")==0) thread_struct.worker_conf = WORKER_ENABLE;
printf("[CONFIG] worker conf is set to %d\n",thread_struct.worker_conf);
}
PARALLEL_CONF_t get_thread_parallel_conf(void)
{
return thread_struct.parallel_conf;
}
WORKER_CONF_t get_thread_worker_conf(void)
{
return thread_struct.worker_conf;
}
int rx_input_level_dBm;
//static int online_log_messages=0;
......
targets/RT/USER/nr-uesoftmodem.h
View file @ 377bbaef
......@@ -85,9 +85,9 @@
#define CONFIG_HLP_TNOFORK "to ease debugging with gdb\n"
#define CONFIG_HLP_NUMEROLOGY "adding numerology for 5G\n"
#define CONFIG_HLP_CODINGW "coding worker thread enable(disable by defult)\n"
#define CONFIG_HLP_FEPW "FEP worker thread enabled(disable by defult)\n"
#define CONFIG_HLP_EMULATE_RF "Emulated RF enabled(disable by defult)\n"
#define CONFIG_HLP_PARALLEL_CMD "three config for level of parallelism 'PARALLEL_SINGLE_THREAD', 'PARALLEL_RU_L1_SPLIT', or 'PARALLEL_RU_L1_TRX_SPLIT'\n"
#define CONFIG_HLP_WORKER_CMD "two option for worker 'WORKER_DISABLE' or 'WORKER_ENABLE'\n"
#define CONFIG_HLP_DISABLNBIOT "disable nb-iot, even if defined in config\n"
......@@ -179,8 +179,8 @@
{"T" , CONFIG_HLP_TDD, PARAMFLAG_BOOL, iptr:&tddflag, defintval:0, TYPE_INT, 0}, \
{"numerology" , CONFIG_HLP_NUMEROLOGY, PARAMFLAG_BOOL, iptr:&numerology, defintval:0, TYPE_INT, 0}, \
{"emulate-rf" , CONFIG_HLP_EMULATE_RF, PARAMFLAG_BOOL, iptr:&emulate_rf, defintval:0, TYPE_INT, 0}, \
{"codingw" , CONFIG_HLP_CODINGW, PARAMFLAG_BOOL, iptr:&codingw, defintval:0, TYPE_INT, 0}, \
{"fepw" , CONFIG_HLP_FEPW, PARAMFLAG_BOOL, iptr:&fepw, defintval:0, TYPE_INT, 0}, \
{"parallel-config", CONFIG_HLP_PARALLEL_CMD,0, strptr:(char **)&parallel_config, defstrval:NULL, TYPE_STRING, 0}, \
{"worker-config", CONFIG_HLP_WORKER_CMD, 0, strptr:(char **)&worker_config, defstrval:NULL, TYPE_STRING, 0}, \
{"nbiot-disable", CONFIG_HLP_DISABLNBIOT, PARAMFLAG_BOOL, iptr:&nonbiotflag, defintval:0, TYPE_INT, 0} \
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment