Add support for USRP X400

targets/ARCH/COMMON/common_lib.h

@@ -92,6 +92,8 @@ typedef enum {
   USRP_X300_DEV,
   /*!\brief device is USRP N300/N310*/
   USRP_N300_DEV,
+  /*!\brief device is USRP X400/X410*/
+  USRP_X400_DEV,
   /*!\brief device is BLADE RF*/
   BLADERF_DEV,
   /*!\brief device is LMSSDR (SoDeRa)*/

targets/ARCH/USRP/USERSPACE/LIB/usrp_lib.cpp

@@ -273,6 +273,7 @@ static int sync_to_gps(openair0_device *device) {
 static int trx_usrp_start(openair0_device *device) {
   usrp_state_t *s = (usrp_state_t *)device->priv;
 
+  if (device->type != USRP_X400_DEV) {
     // setup GPIO for TDD, GPIO(4) = ATR_RX
     //set data direction register (DDR) to output
     s->usrp->set_gpio_attr("FP0", "DDR", 0xfff, 0xfff);
@@ -285,6 +286,7 @@ static int trx_usrp_start(openair0_device *device) {
     s->usrp->set_gpio_attr("FP0", "ATR_XX", (1<<5), 0x7f);
     // set the output pins to 1
     s->usrp->set_gpio_attr("FP0", "OUT", 7<<7, 0xf80);
+  }
 
   s->wait_for_first_pps = 1;
   s->rx_count = 0;
@@ -847,7 +849,7 @@ rx_gain_calib_table_t calib_table_x310[] = {
   {-1,0}
 };
 
-/*! \brief USRPB210 RX calibration table */
+/*! \brief USRPn3xf RX calibration table */
 rx_gain_calib_table_t calib_table_n310[] = {
   {3500000000.0,0.0},
   {2660000000.0,0.0},
@@ -857,6 +859,16 @@ rx_gain_calib_table_t calib_table_n310[] = {
   {-1,0}
 };
 
+/*! \brief Empty RX calibration table */
+rx_gain_calib_table_t calib_table_none[] = {
+  {3500000000.0,0.0},
+  {2660000000.0,0.0},
+  {2300000000.0,0.0},
+  {1880000000.0,0.0},
+  {816000000.0, 0.0},
+  {-1,0}
+};
+
 
 /*! \brief Set RX gain offset
  * \param openair0_cfg RF frontend parameters set by application
@@ -1011,7 +1023,6 @@ extern "C" {
       device->type=USRP_N300_DEV;
       usrp_master_clock = 122.88e6;
       args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
-      //args += ", send_buff_size=33554432";
     }
 
     if (device_adds[0].get("type") == "x300") {
@@ -1025,6 +1036,13 @@ extern "C" {
         LOG_W(HW,"Can't set kernel parameters for X3xx\n");
     }
 
+    if (device_adds[0].get("type") == "x4xx") {
+      printf("Found USRP x400\n");
+      device->type = USRP_X400_DEV;
+      usrp_master_clock = 245.76e6;
+      args += boost::str(boost::format(",master_clock_rate=%f") % usrp_master_clock);
+    }
+
     s->usrp = uhd::usrp::multi_usrp::make(args);
 
     if (args.find("clock_source")==std::string::npos) {
@@ -1103,8 +1121,13 @@ extern "C" {
     std::cerr << "-- Using calibration table: calib_table_n310" << std::endl;
   }
 
+  if (device->type == USRP_X400_DEV) {
+    openair0_cfg[0].rx_gain_calib_table = calib_table_none;
+    std::cerr << "-- Using calibration table: calib_table_none" << std::endl;
+  }
+
 
-  if (device->type==USRP_N300_DEV || device->type==USRP_X300_DEV) {
+  if (device->type==USRP_N300_DEV || device->type==USRP_X300_DEV || device->type==USRP_X400_DEV) {
     LOG_I(HW,"%s() sample_rate:%u\n", __FUNCTION__, (int)openair0_cfg[0].sample_rate);
 
     switch ((int)openair0_cfg[0].sample_rate) {