move PL comutation at MAC

nfapi/open-nFAPI/nfapi/public_inc/fapi_nr_ue_interface.h

@@ -119,7 +119,6 @@ typedef struct {
   uint16_t cell_id;
   uint16_t ssb_start_subcarrier;
   short rsrp_dBm;
-  int16_t pathloss;
 } fapi_nr_ssb_pdu_t;
 
 typedef struct {

openair1/PHY/NR_UE_ESTIMATION/nr_estimation.h

@@ -122,8 +122,6 @@ void phy_adjust_gain_nr(PHY_VARS_NR_UE *ue,
                         uint32_t rx_power_fil_dB,
                         uint8_t gNB_id);
 
-void compute_nr_PL(PHY_VARS_NR_UE *ue, int ssb_index);
-
 void nr_pdsch_ptrs_processing(PHY_VARS_NR_UE *ue,
                               NR_UE_PDSCH **pdsch_vars,
                               NR_DL_FRAME_PARMS *frame_parms,

openair1/PHY/NR_UE_ESTIMATION/nr_ue_measurements.c

@@ -46,31 +46,6 @@
 //#define DEBUG_MEAS_UE
 //#define DEBUG_RANK_EST
 
-// Returns the pathloss in dB for the active UL BWP on the selected carrier based on the DL RS associated with the PRACH transmission
-// computation according to clause 7.4 (Physical random access channel) of 3GPP TS 38.213 version 16.3.0 Release 16
-// Assumptions:
-// - PRACH transmission from a UE is not in response to a detection of a PDCCH order by the UE
-// Measurement units:
-// - referenceSignalPower:   dBm/RE (average EPRE of the resources elements that carry secondary synchronization signals in dBm)
-void compute_nr_PL(PHY_VARS_NR_UE *ue, int ssb_index){
-
-  //TODO improve PL measurements. Probably not correct as it is.
-
-  long referenceSignalPower = ue->nrUE_config.ssb_config.ss_pbch_power;
-  int16_t pathloss = (int16_t)(referenceSignalPower - ue->measurements.ssb_rsrp_dBm[ssb_index]);
-
-  LOG_D(PHY, "In %s: pathloss %d dB, UE RX total gain %d dB, referenceSignalPower %ld dBm/RE (%f mW), RSRP %d dBm (%f mW)\n",
-        __FUNCTION__,
-        pathloss,
-        ue->rx_total_gain_dB,
-        referenceSignalPower,
-        pow(10, referenceSignalPower/10),
-        ue->measurements.ssb_rsrp_dBm[ssb_index],
-        pow(10, ue->measurements.ssb_rsrp_dBm[ssb_index]/10));
-
-  ue->measurements.pathloss = pathloss;
-}
-
 uint32_t get_nr_rx_total_gain_dB (module_id_t Mod_id,uint8_t CC_id)
 {
 

openair1/PHY/defs_nr_UE.h

@@ -147,8 +147,6 @@ typedef struct {
   //! total estimated noise power (dBm)
   short n0_power_tot_dBm;
 
-  int16_t pathloss;
-
   // UE measurements
   //! estimated received spatial signal power (linear)
   int            rx_spatial_power[NUMBER_OF_CONNECTED_gNB_MAX][2][2];
@@ -596,7 +594,6 @@ typedef struct {
   // when off, defaults to frequency domain interpolation
   int chest_freq;
   int chest_time;
-  int generate_ul_signal[NUMBER_OF_CONNECTED_gNB_MAX];
 
   UE_NR_SCAN_INFO_t scan_info[NB_BANDS_MAX];
 

openair1/SCHED_NR_UE/phy_procedures_nr_ue.c

@@ -173,7 +173,6 @@ void nr_fill_rx_indication(fapi_nr_rx_indication_t *rx_ind,
       rx_ind->rx_indication_body[n_pdus - 1].ssb_pdu.cell_id = frame_parms->Nid_cell;
       rx_ind->rx_indication_body[n_pdus - 1].ssb_pdu.ssb_start_subcarrier = frame_parms->ssb_start_subcarrier;
       rx_ind->rx_indication_body[n_pdus - 1].ssb_pdu.rsrp_dBm = ue->measurements.ssb_rsrp_dBm[frame_parms->ssb_index];
-      rx_ind->rx_indication_body[n_pdus - 1].ssb_pdu.pathloss = ue->measurements.pathloss;
     break;
     case FAPI_NR_CSIRS_IND:
       memcpy(&rx_ind->rx_indication_body[n_pdus - 1].csirs_measurements,
@@ -1100,7 +1099,6 @@ int phy_procedures_nrUE_RX(PHY_VARS_NR_UE *ue,
 
             LOG_D(PHY," ------  Decode MIB: frame.slot %d.%d ------  \n", frame_rx%1024, nr_slot_rx);
             nr_ue_pbch_procedures(gNB_id, ue, proc, estimateSz, dl_ch_estimates, phy_pdcch_config);
-            compute_nr_PL(ue, ssb_index);
 
             if (ue->no_timing_correction==0) {
              LOG_D(PHY,"start adjust sync slot = %d no timing %d\n", nr_slot_rx, ue->no_timing_correction);

openair1/SCHED_NR_UE/pucch_uci_ue_nr.c

@@ -213,12 +213,8 @@ void pucch_procedures_ue_nr(PHY_VARS_NR_UE *ue,
       pucch_pdu = &pucch_vars->pucch_pdu[i];
       uint16_t nb_of_prbs = pucch_pdu->prb_size;
       /* Generate PUCCH signal according to its format and parameters */
-      ue->generate_ul_signal[gNB_id] = 1;
 
-      int16_t PL = ue->measurements.pathloss; /* LTE function because NR path loss not yet implemented FFS TODO NR */
-      int contributor = (10 * log10((double)(pow(2,(ue->frame_parms.numerology_index)) * nb_of_prbs)));
-
-      int16_t pucch_tx_power = pucch_pdu->pucch_tx_power + contributor + PL;
+      int16_t pucch_tx_power = pucch_pdu->pucch_tx_power;
 
       if (pucch_tx_power > ue->tx_power_max_dBm)
         pucch_tx_power = ue->tx_power_max_dBm;

openair2/LAYER2/NR_MAC_UE/mac_defs.h

@@ -370,8 +370,6 @@ typedef struct {
   uint32_t ssb_index;
   /// SSB RSRP in dBm
   short ssb_rsrp_dBm;
-  /// SSB pathloss
-  int16_t pathloss;
 
 } NR_PHY_meas_t;
 

openair2/LAYER2/NR_MAC_UE/mac_proto.h

@@ -309,6 +309,7 @@ void select_pucch_resource(NR_UE_MAC_INST_t *mac,
                            PUCCH_sched_t *pucch);
 
 int16_t get_pucch_tx_power_ue(NR_UE_MAC_INST_t *mac,
+                              int scs,
                               NR_PUCCH_Config_t *pucch_Config,
                               PUCCH_sched_t *pucch,
                               uint8_t format_type,
@@ -462,6 +463,8 @@ fapi_nr_ul_config_request_t *get_ul_config_request(NR_UE_MAC_INST_t *mac, int sl
 
 void fill_ul_config(fapi_nr_ul_config_request_t *ul_config, frame_t frame_tx, int slot_tx, uint8_t pdu_type);
 
+int16_t compute_nr_SSB_PL(NR_UE_MAC_INST_t *mac, short ssb_rsrp_dBm);
+
 // PUSCH scheduler:
 // - Calculate the slot in which ULSCH should be scheduled. This is current slot + K2,
 // - where K2 is the offset between the slot in which UL DCI is received and the slot

openair2/LAYER2/NR_MAC_UE/nr_ra_procedures.c

@@ -125,7 +125,7 @@ int16_t get_prach_tx_power(module_id_t mod_id) {
 
   NR_UE_MAC_INST_t *mac = get_mac_inst(mod_id);
   RA_config_t *ra = &mac->ra;
-  int16_t pathloss = mac->phy_measurements.pathloss;
+  int16_t pathloss = compute_nr_SSB_PL(mac, mac->phy_measurements.ssb_rsrp_dBm);
   int16_t ra_preamble_rx_power = (int16_t)(ra->prach_resources.ra_PREAMBLE_RECEIVED_TARGET_POWER - pathloss + 30);
   return min(nr_get_Pcmax(mod_id), ra_preamble_rx_power);
 
@@ -678,7 +678,7 @@ void nr_get_prach_resources(module_id_t mod_id,
   } else {
     /* TODO: This controls the tx_power of UE and the ramping procedure of RA of UE. Later we
              can abstract this, perhaps in the proxy. But for the time being lets leave it as below. */
-    int16_t dl_pathloss = !get_softmodem_params()->emulate_l1 ? mac->phy_measurements.pathloss : 0;
+    int16_t dl_pathloss = !get_softmodem_params()->emulate_l1 ? compute_nr_SSB_PL(mac, mac->phy_measurements.ssb_rsrp_dBm) : 0;
     ssb_rach_config(ra, prach_resources, nr_rach_ConfigCommon, prach_pdu);
     ra_preambles_config(prach_resources, mac, dl_pathloss);
     LOG_D(MAC, "[RAPROC] - Selected RA preamble index %d for contention-based random access procedure... \n", ra->ra_PreambleIndex);

openair2/LAYER2/NR_MAC_UE/nr_ue_procedures.c

@@ -1746,6 +1746,7 @@ void nr_ue_configure_pucch(NR_UE_MAC_INST_t *mac,
     }
 
     pucch_pdu->pucch_tx_power = get_pucch_tx_power_ue(mac,
+                                                      scs,
                                                       pucch_Config,
                                                       pucch,
                                                       pucch_pdu->format_type,
@@ -1795,6 +1796,7 @@ void nr_ue_configure_pucch(NR_UE_MAC_INST_t *mac,
 
 
 int16_t get_pucch_tx_power_ue(NR_UE_MAC_INST_t *mac,
+                              int scs,
                               NR_PUCCH_Config_t *pucch_Config,
                               PUCCH_sched_t *pucch,
                               uint8_t format_type,
@@ -1901,10 +1903,13 @@ int16_t get_pucch_tx_power_ue(NR_UE_MAC_INST_t *mac,
     return (PUCCH_POWER_DEFAULT);
   }
 
-  int16_t pucch_power = P_O_PUCCH + delta_F_PUCCH + DELTA_TF + G_b_f_c;
+  int16_t pathloss = compute_nr_SSB_PL(mac, mac->phy_measurements.ssb_rsrp_dBm);
+  int M_pucch_component = (10 * log10((double)(pow(2,scs) * nb_of_prbs)));
+
+  int16_t pucch_power = P_O_PUCCH + M_pucch_component + pathloss + delta_F_PUCCH + DELTA_TF + G_b_f_c;
 
   NR_TST_PHY_PRINTF("PUCCH ( Tx power : %d dBm ) ( 10Log(...) : %d ) ( from Path Loss : %d ) ( delta_F_PUCCH : %d ) ( DELTA_TF : %d ) ( G_b_f_c : %d ) \n",
-                    pucch_power, contributor, PL, delta_F_PUCCH, DELTA_TF, G_b_f_c);
+                    pucch_power, M_pucch_component, pathloss, delta_F_PUCCH, DELTA_TF, G_b_f_c);
 
   return (pucch_power);
 }
@@ -4225,5 +4230,32 @@ int nr_ue_process_rar(nr_downlink_indication_t *dl_info, NR_UL_TIME_ALIGNMENT_t
   }
 
   return ret;
+}
+
+// Returns the pathloss in dB for the active UL BWP on the selected carrier based on the DL RS associated with the PRACH transmission
+// computation according to clause 7.4 (Physical random access channel) of 3GPP TS 38.213 version 16.3.0 Release 16
+// Assumptions:
+// - PRACH transmission from a UE is not in response to a detection of a PDCCH order by the UE
+// Measurement units:
+// - referenceSignalPower:   dBm/RE (average EPRE of the resources elements that carry secondary synchronization signals in dBm)
+int16_t compute_nr_SSB_PL(NR_UE_MAC_INST_t *mac, short ssb_rsrp_dBm)
+{
+
+  long referenceSignalPower;
+  //TODO improve PL measurements. Probably not correct as it is.
+  if (mac->scc)
+    referenceSignalPower = mac->scc->ss_PBCH_BlockPower;
+  else
+    referenceSignalPower = mac->scc_SIB->ss_PBCH_BlockPower;
+
+  int16_t pathloss = (int16_t)(referenceSignalPower - ssb_rsrp_dBm);
+
+  LOG_D(NR_MAC, "pathloss %d dB, referenceSignalPower %ld dBm/RE (%f mW), RSRP %d dBm (%f mW)\n",
+        pathloss,
+        referenceSignalPower,
+        pow(10, referenceSignalPower/10),
+        ssb_rsrp_dBm,
+        pow(10, ssb_rsrp_dBm/10));
 
+  return pathloss;
 }

openair2/NR_UE_PHY_INTERFACE/NR_IF_Module.c

@@ -1085,12 +1085,10 @@ int handle_dci(module_id_t module_id, int cc_id, unsigned int gNB_index, frame_t
 
 }
 
-void  handle_ssb_meas(NR_UE_MAC_INST_t *mac, uint8_t ssb_index, int16_t rsrp_dbm, int16_t pathloss) {
-
+void  handle_ssb_meas(NR_UE_MAC_INST_t *mac, uint8_t ssb_index, int16_t rsrp_dbm)
+{
   mac->phy_measurements.ssb_index = ssb_index;
   mac->phy_measurements.ssb_rsrp_dBm = rsrp_dbm;
-  mac->phy_measurements.pathloss = pathloss;
-
 }
 
 // L2 Abstraction Layer
@@ -1235,8 +1233,7 @@ int nr_ue_dl_indication(nr_downlink_indication_t *dl_info, NR_UL_TIME_ALIGNMENT_
           case FAPI_NR_RX_PDU_TYPE_SSB:
             handle_ssb_meas(mac,
                             (dl_info->rx_ind->rx_indication_body+i)->ssb_pdu.ssb_index,
-                            (dl_info->rx_ind->rx_indication_body+i)->ssb_pdu.rsrp_dBm,
-                            (dl_info->rx_ind->rx_indication_body+i)->ssb_pdu.pathloss);
+                            (dl_info->rx_ind->rx_indication_body+i)->ssb_pdu.rsrp_dBm);
             ret_mask |= (handle_bcch_bch(dl_info->module_id, dl_info->cc_id, dl_info->gNB_index, dl_info->phy_data,
                                          (dl_info->rx_ind->rx_indication_body+i)->ssb_pdu.pdu,
                                          (dl_info->rx_ind->rx_indication_body+i)->ssb_pdu.additional_bits,