Enabling ITTI interactions between RRC and X2AP for the generation of sgb...

Enabling ITTI interactions between RRC and X2AP for the generation of sgb addition request ACK message at the gNB side

openair2/COMMON/x2ap_messages_def.h

@@ -53,3 +53,4 @@ MESSAGE_DEF(X2AP_SENB_ADDITION_REQ              , MESSAGE_PRIORITY_MED, x2ap_sen
 
 /*SGnb bearer addition messages X2AP <-> RRC */
 MESSAGE_DEF(X2AP_ENDC_SGNB_ADDITION_REQ              , MESSAGE_PRIORITY_MED, x2ap_ENDC_sgnb_addition_req_t         , x2ap_ENDC_sgnb_addition_req)
+MESSAGE_DEF(X2AP_ENDC_SGNB_ADDITION_REQ_ACK              , MESSAGE_PRIORITY_MED, x2ap_ENDC_sgnb_addition_req_ACK_t         , x2ap_ENDC_sgnb_addition_req_ACK)

openair2/COMMON/x2ap_messages_types.h

@@ -39,6 +39,7 @@
 #define X2AP_HANDOVER_CANCEL(mSGpTR)            		(mSGpTR)->ittiMsg.x2ap_handover_cancel
 #define X2AP_SENB_ADDITION_REQ(mSGpTR)              	(mSGpTR)->ittiMsg.x2ap_senb_addition_req
 #define X2AP_ENDC_SGNB_ADDITION_REQ(mSGpTR)         	(mSGpTR)->ittiMsg.x2ap_ENDC_sgnb_addition_req
+#define X2AP_ENDC_SGNB_ADDITION_REQ_ACK(mSGpTR)         (mSGpTR)->ittiMsg.x2ap_ENDC_sgnb_addition_req_ACK
 
 #define X2AP_MAX_NB_ENB_IP_ADDRESS 2
 
@@ -343,5 +344,44 @@ typedef struct x2ap_ENDC_sgnb_addition_req_s {
 
 } x2ap_ENDC_sgnb_addition_req_t;
 
+typedef struct x2ap_ENDC_sgnb_addition_req_ACK_s {
+  int ue_x2_id;
+
+  /* used for RRC->X2AP in source eNB */
+  int rnti;
+
+  security_capabilities_t security_capabilities;
+
+  /* SgNB Security Key */
+  uint8_t      kgnb[32];
+
+  /*next_hop_chaining_coun */
+  long int     kgnb_ncc;
+
+  /* UE aggregate maximum bitrate */
+  ambr_t ue_ambr;
+
+  uint8_t nb_e_rabs_tobeadded;
+
+ /* list of e_rab to be added by RRC layers */
+  e_rab_tobe_added_t e_rabs_tobeadded[S1AP_MAX_E_RAB];
+
+  /* list of e_rab to be setup by RRC layers */
+  e_rab_t  e_rab_param[S1AP_MAX_E_RAB];
+
+  x2ap_lastvisitedcell_info_t lastvisitedcell_info;
+
+  uint8_t rrc_buffer[4096 /* arbitrary, big enough */];
+  int rrc_buffer_size;
+
+  int target_assoc_id;
+
+  	/*long int pDCPatSgNB = X2AP_EN_DC_ResourceConfiguration__pDCPatSgNB_present;
+  	long int mCGresources = X2AP_EN_DC_ResourceConfiguration__mCGresources_not_present;
+  	long int sCGresources = X2AP_EN_DC_ResourceConfiguration__sCGresources_not_present;*/
+
+
+} x2ap_ENDC_sgnb_addition_req_ACK_t;
+
 
 #endif /* X2AP_MESSAGES_TYPES_H_ */

openair2/RRC/NR/rrc_gNB_nsa.c

@@ -104,6 +104,10 @@ void rrc_add_nsa_user(gNB_RRC_INST *rrc,struct rrc_gNB_ue_context_s *ue_context_
 
   rrc_gNB_carrier_data_t *carrier=&rrc->carrier;
 
+  MessageDef *msg;
+  msg = itti_alloc_new_message(TASK_RRC_ENB, X2AP_ENDC_SGNB_ADDITION_REQ_ACK);
+  X2AP_ENDC_SGNB_ADDITION_REQ_ACK(msg).rrc_buffer_size = 2048; //Need to verify correct value for the buffer_size
+
 // NR RRCReconfiguration
 
   AssertFatal(rrc->Nb_ue < MAX_NR_RRC_UE_CONTEXTS,"cannot add another UE\n");
@@ -130,7 +134,16 @@ void rrc_add_nsa_user(gNB_RRC_INST *rrc,struct rrc_gNB_ue_context_s *ue_context_
   NR_CG_Config_t *CG_Config = calloc(1,sizeof(*CG_Config));
   memset((void*)CG_Config,0,sizeof(*CG_Config));
   generate_CG_Config(rrc,CG_Config,ue_context_p->ue_context.reconfig,ue_context_p->ue_context.rb_config);
+
   // Send to X2 entity to transport to MeNB
+  asn_enc_rval_t enc_rval = uper_encode_to_buffer(&asn_DEF_NR_CG_Config,
+          	  	  	  	  	  	  	  	  	  	  NULL,
+          	  	  	  	  	  	  	  	  	  	  (void *)CG_Config,
+          	  	  	  	  	  	  	  	  	  	  X2AP_ENDC_SGNB_ADDITION_REQ_ACK(msg).rrc_buffer,
+          	  	  	  	  	  	  	  	  	  	  X2AP_ENDC_SGNB_ADDITION_REQ_ACK(msg).rrc_buffer_size);
+
+
+  itti_send_msg_to_task(TASK_X2AP, ENB_MODULE_ID_TO_INSTANCE(0), msg); //Check right id instead of hardcoding
 
   rrc->Nb_ue++;
   // configure MAC and RLC

openair2/X2AP/x2ap_eNB.c

@@ -446,6 +446,47 @@ void x2ap_eNB_handle_handover_req_ack(instance_t instance,
   x2ap_eNB_generate_x2_handover_request_ack(instance_p, target, x2ap_handover_req_ack);
 }
 
+static
+void x2ap_eNB_handle_sgNB_add_req_ack(instance_t instance,
+		x2ap_ENDC_sgnb_addition_req_ACK_t *x2ap_ENDC_sgnb_addition_req_ACK)
+{
+  /* TODO: remove this hack (the goal is to find the correct
+   * eNodeB structure for the other end) - we need a proper way for RRC
+   * and X2AP to identify eNodeBs
+   * RRC knows about mod_id and X2AP knows about eNB_id (eNB_ID in
+   * the configuration file)
+   * as far as I understand.. CROUX
+   */
+
+
+  x2ap_eNB_instance_t *instance_p;
+  x2ap_eNB_data_t     *target;
+  /*int source_assoc_id = x2ap_ENDC_sgnb_addition_req_ACK->source_assoc_id;
+  int                 ue_id;
+  int                 id_source;
+  int                 id_target;*/
+
+  instance_p = x2ap_eNB_get_instance(instance);
+  DevAssert(instance_p != NULL);
+
+  /*target = x2ap_get_eNB(NULL, source_assoc_id, 0);
+  DevAssert(target != NULL);*/
+
+  // rnti is a new information, save it
+
+  /*ue_id     = x2ap_handover_req_ack->x2_id_target;
+  id_source = x2ap_id_get_id_source(&instance_p->id_manager, ue_id);
+  id_target = ue_id;
+  x2ap_set_ids(&instance_p->id_manager, ue_id, x2ap_handover_req_ack->rnti, id_source, id_target);*/
+
+
+  //target = x2ap_get_eNB(NULL, 17, 0);
+  target = x2ap_is_eNB_id_in_list (3585); //Currently hardcoded. Need to extract it differently
+  DevAssert(target != NULL);
+  x2ap_eNB_generate_ENDC_x2_SgNB_addition_request_ACK(instance_p, target, x2ap_ENDC_sgnb_addition_req_ACK, 0);
+}
+
+
 static
 void x2ap_eNB_ue_context_release(instance_t instance,
                                  x2ap_ue_context_release_t *x2ap_ue_context_release)
@@ -511,6 +552,13 @@ void *x2ap_task(void *arg) {
                                                 &X2AP_UE_CONTEXT_RELEASE(received_msg));
         break;
 
+      case X2AP_ENDC_SGNB_ADDITION_REQ_ACK:
+    	  x2ap_eNB_handle_sgNB_add_req_ack(ITTI_MESSAGE_GET_INSTANCE(received_msg),
+    			  &X2AP_ENDC_SGNB_ADDITION_REQ_ACK(received_msg));
+    	LOG_I(X2AP, "Received elements for X2AP_ENDC_SGNB_ADDITION_REQ_ACK \n");
+
+    	break;
+
       case SCTP_INIT_MSG_MULTI_CNF:
         x2ap_eNB_handle_sctp_init_msg_multi_cnf(ITTI_MESSAGE_GET_INSTANCE(received_msg),
                                                 &received_msg->ittiMsg.sctp_init_msg_multi_cnf);

openair2/X2AP/x2ap_eNB_generate_messages.c

@@ -1673,3 +1673,12 @@ int x2ap_eNB_generate_ENDC_x2_SgNB_addition_request(
 }
 
 
+int x2ap_eNB_generate_ENDC_x2_SgNB_addition_request_ACK( x2ap_eNB_instance_t *instance_p, x2ap_eNB_data_t *x2ap_eNB_data_p,
+		x2ap_ENDC_sgnb_addition_req_ACK_t *x2ap_sgnb_addition_req_ACK, int ue_id)
+{
+        
+	return 0;
+
+}
+
+

openair2/X2AP/x2ap_eNB_generate_messages.h

@@ -72,4 +72,6 @@ int x2ap_eNB_generate_ENDC_x2_setup_response( x2ap_eNB_instance_t *instance_p, x
 
 int x2ap_eNB_generate_ENDC_x2_SgNB_addition_request( x2ap_eNB_instance_t *instance_p, x2ap_eNB_data_t *x2ap_eNB_data_p, int ue_id);
 
+int x2ap_eNB_generate_ENDC_x2_SgNB_addition_request_ACK( x2ap_eNB_instance_t *instance_p, x2ap_eNB_data_t *x2ap_eNB_data_p, x2ap_ENDC_sgnb_addition_req_ACK_t *x2ap_sgnb_addition_req_ACK, int ue_id);
+
 #endif /*  X2AP_ENB_GENERATE_MESSAGES_H_ */

openair2/X2AP/x2ap_eNB_handler.c

@@ -1470,7 +1470,7 @@ x2ap_eNB_handle_ENDC_x2_setup_request(instance_t instance,
   instance_p = x2ap_eNB_get_instance(instance);
   DevAssert(instance_p != NULL);
 
-  //return x2ap_eNB_generate_ENDC_x2_setup_response(instance_p, x2ap_eNB_data);
+  x2ap_eNB_generate_ENDC_x2_setup_response(instance_p, x2ap_eNB_data);
   return x2ap_eNB_generate_ENDC_x2_SgNB_addition_request(instance_p, x2ap_eNB_data,0);
 
 }
@@ -1658,6 +1658,8 @@ int x2ap_gNB_handle_ENDC_sGNB_addition_request (instance_t instance,
   x2ap_eNB_data = x2ap_get_eNB(NULL, assoc_id, 0);
   DevAssert(x2ap_eNB_data != NULL);
 
+  X2AP_INFO("X2AP Association id: %d \n",assoc_id);
+
   instance_p = x2ap_eNB_get_instance(instance);
   DevAssert(instance_p != NULL);
 

targets/PROJECTS/GENERIC-LTE-EPC/CONF/gnb.band78.slave.conf

+Active_gNBs = ( "gNB-Eurecom-5GNRBox");
+# Asn1_verbosity, choice in: none, info, annoying
+Asn1_verbosity = "none";
+
+gNBs =
+(
+ {
+    ////////// Identification parameters:
+    gNB_ID    =  0xe00;
+
+    cell_type =  "CELL_MACRO_GNB";
+
+    gNB_name  =  "gNB-Eurecom-5GNRBox";
+
+    // Tracking area code, 0x0000 and 0xfffe are reserved values
+    tracking_area_code  =  1;
+
+    plmn_list = ({mcc = 208; mnc = 93; mnc_length = 2;});	 
+
+    tr_s_preference     = "local_mac"
+
+    ////////// Physical parameters:
+
+    ssb_SubcarrierOffset                                      = 0;
+	
+    servingCellConfigCommon = (
+    {
+ #spCellConfigCommon
+
+      physCellId                                                    = 0;
+
+#  downlinkConfigCommon
+    #frequencyInfoDL
+      # this is 3600 MHz + 84 PRBs@30kHz SCS (same as initial BWP)
+      absoluteFrequencySSB                                          = 642016;
+      dl_frequencyBand                                                 = 78;
+      # this is 3600 MHz
+      dl_absoluteFrequencyPointA                                       = 640000;
+      #scs-SpecificCarrierList
+        dl_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        dl_subcarrierSpacing                                           = 1;
+        dl_carrierBandwidth                                            = 217;
+     #initialDownlinkBWP
+      #genericParameters
+        # this is RBstart=84,L=50 (275*(L-1))+RBstart
+        initialDLBWPlocationAndBandwidth                                        = 13559;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialDLBWPsubcarrierSpacing                                           = 1;
+      #pdcch-ConfigCommon
+        initialDLBWPcontrolResourceSetZero                                      = 12;
+        initialDLBWPsearchSpaceZero                                             = 0;
+      #pdsch-ConfigCommon
+        #pdschTimeDomainAllocationList (up to 16 entries)
+             initialDLBWPk0_0                    = 0;
+             #initialULBWPmappingType
+	     #0=typeA,1=typeB
+             initialDLBWPmappingType_0           = 0;
+             #this is SS=2,L=3
+             initialDLBWPstartSymbolAndLength_0  = 40;
+
+             initialDLBWPk0_1                    = 0;
+             initialDLBWPmappingType_1           = 0;
+             #this is SS=2,L=12 
+             initialDLBWPstartSymbolAndLength_1  = 53;
+
+             initialDLBWPk0_2                    = 0;
+             initialDLBWPmappingType_2           = 0;
+             #this is SS=1,L=12 
+             initialDLBWPstartSymbolAndLength_2  = 54;
+  #uplinkConfigCommon 
+     #frequencyInfoUL
+      ul_frequencyBand                                                 = 78;
+      #scs-SpecificCarrierList
+      ul_offstToCarrier                                              = 0;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      ul_subcarrierSpacing                                           = 1;
+      ul_carrierBandwidth                                            = 217;
+      pMax                                                          = 20;
+     #initialUplinkBWP
+      #genericParameters
+        initialULBWPlocationAndBandwidth                                        = 13559;
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+        initialULBWPsubcarrierSpacing                                           = 1;
+      #rach-ConfigCommon
+        #rach-ConfigGeneric
+          prach_ConfigurationIndex                                  = 98;
+#prach_msg1_FDM
+#0 = one, 1=two, 2=four, 3=eight
+          prach_msg1_FDM                                            = 0;
+          prach_msg1_FrequencyStart                                 = 0;
+          zeroCorrelationZoneConfig                                 = 13;
+          preambleReceivedTargetPower                               = -118;
+#preamblTransMax (0...10) = (3,4,5,6,7,8,10,20,50,100,200)
+          preambleTransMax                                          = 6;
+#powerRampingStep
+# 0=dB0,1=dB2,2=dB4,3=dB6
+        powerRampingStep                                            = 1;
+#ra_ReponseWindow
+#1,2,4,8,10,20,40,80
+        ra_ResponseWindow                                           = 4;
+#ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR
+#0=oneeighth,1=onefourth,2=half,3=one,4=two,5=four,6=eight,7=sixteen
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB_PR                = 3;
+#oneHalf (0..15) 4,8,12,16,...60,64
+        ssb_perRACH_OccasionAndCB_PreamblesPerSSB                   = 15;
+#ra_ContentionResolutionTimer
+#(0..7) 8,16,24,32,40,48,56,64
+        ra_ContentionResolutionTimer                                = 7;
+        rsrp_ThresholdSSB                                           = 19;
+#prach-RootSequenceIndex_PR
+#0 = 839, 1 = 139
+        prach_RootSequenceIndex_PR                                  = 1;
+        prach_RootSequenceIndex                                     = 1;
+        # SCS for msg1, can only be 15 for 30 kHz < 6 GHz, takes precendence over the one derived from prach-ConfigIndex
+        #  
+        msg1_SubcarrierSpacing                                      = 1,
+
+# restrictedSetConfig
+# 0=unrestricted, 1=restricted type A, 2=restricted type B
+        restrictedSetConfig                                         = 0,
+      # pusch-ConfigCommon (up to 16 elements)
+        initialULBWPk2_0                      = 2;
+        initialULBWPmappingType_0             = 1
+        # this is SS=0 L=11
+        initialULBWPstartSymbolAndLength_0    = 55;
+ 	
+	initialULBWPk2_1                      = 2;
+        initialULBWPmappingType_1             = 1;
+        # this is SS=0 L=12
+        initialULBWPstartSymbolAndLength_1    = 69;
+
+
+        msg3_DeltaPreamble                                          = 1;
+        p0_NominalWithGrant                                         =-90;
+
+# pucch-ConfigCommon setup :
+# pucchGroupHopping
+# 0 = neither, 1= group hopping, 2=sequence hopping
+        pucchGroupHopping                                           = 0;
+        hoppingId                                                   = 40;
+        p0_nominal                                                  = -90;
+# ssb_PositionsInBurs_BitmapPR
+# 1=short, 2=medium, 3=long
+      ssb_PositionsInBurst_PR                                       = 2;
+      ssb_PositionsInBurst_Bitmap                                   = 255;
+
+# ssb_periodicityServingCell
+# 0 = ms5, 1=ms10, 2=ms20, 3=ms40, 4=ms80, 5=ms160, 6=spare2, 7=spare1 
+      ssb_periodicityServingCell                                    = 2
+;
+# dmrs_TypeA_position
+# 0 = pos2, 1 = pos3
+      dmrs_TypeA_Position                                           = 0;
+
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      subcarrierSpacing                                             = 1;
+
+
+  #tdd-UL-DL-ConfigurationCommon
+# subcarrierSpacing
+# 0=kHz15, 1=kHz30, 2=kHz60, 3=kHz120  
+      referenceSubcarrierSpacing                                    = 2;
+      # pattern1 
+      # dl_UL_TransmissionPeriodicity
+      # 0=ms0p5, 1=ms0p625, 2=ms1, 3=ms1p25, 4=ms2, 5=ms2p5, 6=ms5, 7=ms10
+      dl_UL_TransmissionPeriodicity                                 = 0;
+      nrofDownlinkSlots                                             = 7;
+      nrofDownlinkSymbols                                           = 6;
+      nrofUplinkSlots                                               = 2;
+      nrofUplinkSymbols                                             = 4;
+
+  ssPBCH_BlockPower                                             = 10;
+  }
+
+  );
+
+
+    # ------- SCTP definitions
+    SCTP :
+    {
+        # Number of streams to use in input/output
+        SCTP_INSTREAMS  = 2;
+        SCTP_OUTSTREAMS = 2;
+    };
+
+
+    ////////// MME parameters:
+    mme_ip_address      = ( { ipv4       = "192.168.12.26";
+                              ipv6       = "192:168:30::17";
+                              active     = "yes";
+                              preference = "ipv4";
+                            }
+                          );
+                          
+    ///X2
+    enable_x2 = "yes";
+    t_reloc_prep      = 1000;      /* unit: millisecond */
+    tx2_reloc_overall = 2000;      /* unit: millisecond */
+    target_enb_x2_ip_address      = (
+                                     { ipv4       = "192.168.12.188";
+                                       ipv6       = "192:168:30::17";
+                                       preference = "ipv4";
+                                     }
+                                    );                       
+
+    NETWORK_INTERFACES :
+    {
+
+        GNB_INTERFACE_NAME_FOR_S1_MME            = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1_MME              = "192.168.12.107/24";
+        GNB_INTERFACE_NAME_FOR_S1U               = "eth0";
+        GNB_IPV4_ADDRESS_FOR_S1U                 = "192.168.12.107/24";
+        GNB_PORT_FOR_S1U                         = 2152; # Spec 2152
+        
+        GNB_IPV4_ADDRESS_FOR_X2C                 = "192.168.12.107/23";
+        GNB_PORT_FOR_X2C                         = 36422; # Spec 36422
+    };
+  }
+);
+
+MACRLCs = (
+	{
+	num_cc = 1;
+	tr_s_preference = "local_L1";
+	tr_n_preference = "local_RRC";
+        }  
+);
+
+L1s = (
+    	{
+	num_cc = 1;
+	tr_n_preference = "local_mac";
+        }  
+);
+
+RUs = (
+    {		  
+       local_rf       = "yes"
+         nb_tx          = 1
+         nb_rx          = 1
+         att_tx         = 0
+         att_rx         = 0;
+         bands          = [7];
+         max_pdschReferenceSignalPower = -27;
+         max_rxgain                    = 114;
+         eNB_instances  = [0];
+	 sdr_addrs = "addr=192.168.20.2,mgmt_addr=192.168.20.2";
+         clock_src = "internal";
+    }
+);  
+
+THREAD_STRUCT = (
+  {
+    #three config for level of parallelism "PARALLEL_SINGLE_THREAD", "PARALLEL_RU_L1_SPLIT", or "PARALLEL_RU_L1_TRX_SPLIT"
+    parallel_config    = "PARALLEL_RU_L1_TRX_SPLIT";
+    #two option for worker "WORKER_DISABLE" or "WORKER_ENABLE"
+    worker_config      = "WORKER_ENABLE";
+  }
+);
+
+     log_config :
+     {
+       global_log_level                      ="info";
+       global_log_verbosity                  ="medium";
+       hw_log_level                          ="info";
+       hw_log_verbosity                      ="medium";
+       phy_log_level                         ="info";
+       phy_log_verbosity                     ="medium";
+       mac_log_level                         ="info";
+       mac_log_verbosity                     ="high";
+       rlc_log_level                         ="info";
+       rlc_log_verbosity                     ="medium";
+       pdcp_log_level                        ="info";
+       pdcp_log_verbosity                    ="medium";
+       rrc_log_level                         ="info";
+       rrc_log_verbosity                     ="medium";
+    };
+