Skip to content

O
OpenXG-RAN
Commit 82c4380a authored by Francesco Mani's avatar Francesco Mani
Browse files
Options

uci mac functions in a new file

parent 40141270
Hide whitespace changes
Inline Side-by-side
Showing with 585 additions and 545 deletions
cmake_targets/CMakeLists.txt
View file @ 82c4380a
...@@ -2031,6 +2031,7 @@ set (MAC_NR_SRC ...@@ -2031,6 +2031,7 @@ set (MAC_NR_SRC
${NR_GNB_MAC_DIR}/gNB_scheduler_ulsch.c ${NR_GNB_MAC_DIR}/gNB_scheduler_ulsch.c
${NR_GNB_MAC_DIR}/gNB_scheduler_primitives.c ${NR_GNB_MAC_DIR}/gNB_scheduler_primitives.c
${NR_GNB_MAC_DIR}/gNB_scheduler_phytest.c ${NR_GNB_MAC_DIR}/gNB_scheduler_phytest.c
${NR_GNB_MAC_DIR}/gNB_scheduler_uci.c
${NR_GNB_MAC_DIR}/gNB_scheduler_RA.c ${NR_GNB_MAC_DIR}/gNB_scheduler_RA.c
) )
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler.c
View file @ 82c4380a
...@@ -337,61 +337,6 @@ void nr_schedule_pusch(int Mod_idP, ...@@ -337,61 +337,6 @@ void nr_schedule_pusch(int Mod_idP,
} }
} }
void nr_schedule_pucch(int Mod_idP,
int UE_id,
int nr_ulmix_slots,
frame_t frameP,
sub_frame_t slotP) {
uint16_t O_csi, O_ack, O_uci;
uint8_t O_sr = 0; // no SR in PUCCH implemented for now
NR_ServingCellConfigCommon_t *scc = RC.nrmac[Mod_idP]->common_channels->ServingCellConfigCommon;
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
AssertFatal(UE_info->active[UE_id],"Cannot find UE_id %d is not active\n",UE_id);
NR_CellGroupConfig_t *secondaryCellGroup = UE_info->secondaryCellGroup[UE_id];
int bwp_id=1;
NR_BWP_Uplink_t *ubwp=secondaryCellGroup->spCellConfig->spCellConfigDedicated->uplinkConfig->uplinkBWP_ToAddModList->list.array[bwp_id-1];
nfapi_nr_ul_tti_request_t *UL_tti_req = &RC.nrmac[Mod_idP]->UL_tti_req[0];
NR_sched_pucch *curr_pucch;
for (int k=0; k<nr_ulmix_slots; k++) {
for (int l=0; l<2; l++) {
curr_pucch = &UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][l];
O_ack = curr_pucch->dai_c;
O_csi = curr_pucch->csi_bits;
O_uci = O_ack + O_csi + O_sr;
if ((O_uci>0) && (frameP == curr_pucch->frame) && (slotP == curr_pucch->ul_slot)) {
UL_tti_req->SFN = curr_pucch->frame;
UL_tti_req->Slot = curr_pucch->ul_slot;
UL_tti_req->pdus_list[UL_tti_req->n_pdus].pdu_type = NFAPI_NR_UL_CONFIG_PUCCH_PDU_TYPE;
UL_tti_req->pdus_list[UL_tti_req->n_pdus].pdu_size = sizeof(nfapi_nr_pucch_pdu_t);
nfapi_nr_pucch_pdu_t *pucch_pdu = &UL_tti_req->pdus_list[UL_tti_req->n_pdus].pucch_pdu;
memset(pucch_pdu,0,sizeof(nfapi_nr_pucch_pdu_t));
UL_tti_req->n_pdus+=1;
LOG_D(MAC,"Scheduling pucch reception for frame %d slot %d with (%d, %d, %d) (SR ACK, CSI) bits\n",
frameP,slotP,O_sr,O_ack,curr_pucch->csi_bits);
nr_configure_pucch(pucch_pdu,
scc,
ubwp,
UE_info->rnti[UE_id],
curr_pucch->resource_indicator,
O_csi,
O_ack,
O_sr);
memset((void *) &UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][l],
0,
sizeof(NR_sched_pucch));
}
}
}
}
bool is_xlsch_in_slot(uint64_t bitmap, sub_frame_t slot) { bool is_xlsch_in_slot(uint64_t bitmap, sub_frame_t slot) {
return (bitmap >> slot) & 0x01; return (bitmap >> slot) & 0x01;
} }
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_dlsch.c
View file @ 82c4380a
...@@ -343,100 +343,6 @@ int nr_generate_dlsch_pdu(module_id_t module_idP, ...@@ -343,100 +343,6 @@ int nr_generate_dlsch_pdu(module_id_t module_idP,
return offset; return offset;
} }
void nr_rx_acknack(nfapi_nr_uci_pusch_pdu_t *uci_pusch,
nfapi_nr_uci_pucch_pdu_format_0_1_t *uci_01,
nfapi_nr_uci_pucch_pdu_format_2_3_4_t *uci_234,
NR_UL_IND_t *UL_info, NR_UE_sched_ctrl_t *sched_ctrl, NR_mac_stats_t *stats) {
// TODO
int max_harq_rounds = 4; // TODO define macro
if (uci_01 != NULL) {
// handle harq
int harq_idx_s = 0;
// iterate over received harq bits
for (int harq_bit = 0; harq_bit < uci_01->harq->num_harq; harq_bit++) {
// search for the right harq process
for (int harq_idx = harq_idx_s; harq_idx < NR_MAX_NB_HARQ_PROCESSES; harq_idx++) {
// if the gNB received ack with a good confidence
if ((UL_info->slot-1) == sched_ctrl->harq_processes[harq_idx].feedback_slot) {
if ((uci_01->harq->harq_list[harq_bit].harq_value == 1) &&
(uci_01->harq->harq_confidence_level == 0)) {
// toggle NDI and reset round
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
else
sched_ctrl->harq_processes[harq_idx].round++;
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
harq_idx_s = harq_idx + 1;
// if the max harq rounds was reached
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
stats->dlsch_errors++;
}
break;
}
// if feedback slot processing is aborted
else if (((UL_info->slot-1) > sched_ctrl->harq_processes[harq_idx].feedback_slot) &&
(sched_ctrl->harq_processes[harq_idx].is_waiting)) {
sched_ctrl->harq_processes[harq_idx].round++;
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
}
}
}
}
if (uci_234 != NULL) {
int harq_idx_s = 0;
int acknack;
// iterate over received harq bits
for (int harq_bit = 0; harq_bit < uci_234->harq.harq_bit_len; harq_bit++) {
acknack = ((uci_234->harq.harq_payload[harq_bit>>3])>>harq_bit)&0x01;
for (int harq_idx = harq_idx_s; harq_idx < NR_MAX_NB_HARQ_PROCESSES-1; harq_idx++) {
// if the gNB received ack with a good confidence or if the max harq rounds was reached
if ((UL_info->slot-1) == sched_ctrl->harq_processes[harq_idx].feedback_slot) {
// TODO add some confidence level for when there is no CRC
if ((uci_234->harq.harq_crc != 1) && acknack) {
// toggle NDI and reset round
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
else
sched_ctrl->harq_processes[harq_idx].round++;
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
harq_idx_s = harq_idx + 1;
// if the max harq rounds was reached
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
stats->dlsch_errors++;
}
break;
}
// if feedback slot processing is aborted
else if (((UL_info->slot-1) > sched_ctrl->harq_processes[harq_idx].feedback_slot) &&
(sched_ctrl->harq_processes[harq_idx].is_waiting)) {
sched_ctrl->harq_processes[harq_idx].round++;
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
}
}
}
}
}
int getNrOfSymbols(NR_BWP_Downlink_t *bwp, int tda) { int getNrOfSymbols(NR_BWP_Downlink_t *bwp, int tda) {
struct NR_PDSCH_TimeDomainResourceAllocationList *tdaList = struct NR_PDSCH_TimeDomainResourceAllocationList *tdaList =
bwp->bwp_Common->pdsch_ConfigCommon->choice.setup->pdsch_TimeDomainAllocationList; bwp->bwp_Common->pdsch_ConfigCommon->choice.setup->pdsch_TimeDomainAllocationList;
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_primitives.c
View file @ 82c4380a
...@@ -915,84 +915,6 @@ void nr_configure_pucch(nfapi_nr_pucch_pdu_t* pucch_pdu, ...@@ -915,84 +915,6 @@ void nr_configure_pucch(nfapi_nr_pucch_pdu_t* pucch_pdu,
} }
uint16_t compute_pucch_prb_size(uint8_t format,
uint8_t nr_prbs,
uint16_t O_tot,
uint16_t O_csi,
NR_PUCCH_MaxCodeRate_t *maxCodeRate,
uint8_t Qm,
uint8_t n_symb,
uint8_t n_re_ctrl) {
uint16_t O_crc;
if (O_tot<12)
O_crc = 0;
else{
if (O_tot<20)
O_crc = 6;
else {
if (O_tot<360)
O_crc = 11;
else
AssertFatal(1==0,"Case for segmented PUCCH not yet implemented");
}
}
int rtimes100;
switch(*maxCodeRate){
case NR_PUCCH_MaxCodeRate_zeroDot08 :
rtimes100 = 8;
break;
case NR_PUCCH_MaxCodeRate_zeroDot15 :
rtimes100 = 15;
break;
case NR_PUCCH_MaxCodeRate_zeroDot25 :
rtimes100 = 25;
break;
case NR_PUCCH_MaxCodeRate_zeroDot35 :
rtimes100 = 35;
break;
case NR_PUCCH_MaxCodeRate_zeroDot45 :
rtimes100 = 45;
break;
case NR_PUCCH_MaxCodeRate_zeroDot60 :
rtimes100 = 60;
break;
case NR_PUCCH_MaxCodeRate_zeroDot80 :
rtimes100 = 80;
break;
default :
AssertFatal(1==0,"Invalid MaxCodeRate");
}
float r = (float)rtimes100/100;
if (O_csi == O_tot) {
if ((O_tot+O_csi)>(nr_prbs*n_re_ctrl*n_symb*Qm*r))
AssertFatal(1==0,"MaxCodeRate %.2f can't support %d UCI bits and %d CRC bits with %d PRBs",
r,O_tot,O_crc,nr_prbs);
else
return nr_prbs;
}
if (format==2){
// TODO fix this for multiple CSI reports
for (int i=1; i<=nr_prbs; i++){
if((O_tot+O_crc)<=(i*n_symb*Qm*n_re_ctrl*r) &&
(O_tot+O_crc)>((i-1)*n_symb*Qm*n_re_ctrl*r))
return i;
}
AssertFatal(1==0,"MaxCodeRate %.2f can't support %d UCI bits and %d CRC bits with at most %d PRBs",
r,O_tot,O_crc,nr_prbs);
}
else{
AssertFatal(1==0,"Not yet implemented");
}
}
void prepare_dci(NR_CellGroupConfig_t *secondaryCellGroup, void prepare_dci(NR_CellGroupConfig_t *secondaryCellGroup,
dci_pdu_rel15_t *dci_pdu_rel15, dci_pdu_rel15_t *dci_pdu_rel15,
nr_dci_format_t format, nr_dci_format_t format,
...@@ -1917,324 +1839,6 @@ void get_pdsch_to_harq_feedback(int Mod_idP, ...@@ -1917,324 +1839,6 @@ void get_pdsch_to_harq_feedback(int Mod_idP,
} }
uint16_t nr_get_csi_bitlen(int Mod_idP,
int UE_id,
uint8_t csi_report_id) {
uint16_t csi_bitlen =0;
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
CRI_SSBRI_RSRP_bitlen_t * CSI_report_bitlen = NULL;
CSI_report_bitlen = &(UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0]);
csi_bitlen = ((CSI_report_bitlen->cri_ssbri_bitlen * CSI_report_bitlen->nb_ssbri_cri) +
CSI_report_bitlen->rsrp_bitlen +(CSI_report_bitlen->diff_rsrp_bitlen *
(CSI_report_bitlen->nb_ssbri_cri -1 )) *UE_info->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report);
return csi_bitlen;
}
void csi_period_offset(NR_CSI_ReportConfig_t *csirep,
int *period, int *offset) {
NR_CSI_ReportPeriodicityAndOffset_PR p_and_o = csirep->reportConfigType.choice.periodic->reportSlotConfig.present;
switch(p_and_o){
case NR_CSI_ReportPeriodicityAndOffset_PR_slots4:
*period = 4;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots4;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots5:
*period = 5;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots5;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots8:
*period = 8;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots8;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots10:
*period = 10;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots10;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots16:
*period = 16;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots16;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots20:
*period = 20;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots20;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots40:
*period = 40;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots40;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots80:
*period = 80;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots80;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots160:
*period = 160;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots160;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots320:
*period = 320;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots320;
break;
default:
AssertFatal(1==0,"No periodicity and offset resource found in CSI report");
}
}
//!TODO : same function can be written to handle csi_resources
void compute_csi_bitlen (NR_CellGroupConfig_t *secondaryCellGroup, NR_UE_info_t *UE_info, int UE_id) {
uint8_t csi_report_id = 0;
uint8_t csi_resourceidx =0;
uint8_t csi_ssb_idx =0;
NR_CSI_MeasConfig_t *csi_MeasConfig = secondaryCellGroup->spCellConfig->spCellConfigDedicated->csi_MeasConfig->choice.setup;
NR_CSI_ResourceConfigId_t csi_ResourceConfigId;
for (csi_report_id=0; csi_report_id < csi_MeasConfig->csi_ReportConfigToAddModList->list.count; csi_report_id++){
csi_ResourceConfigId=csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->resourcesForChannelMeasurement;
UE_info->csi_report_template[UE_id][csi_report_id].reportQuantity_type = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportQuantity.present;
for ( csi_resourceidx = 0; csi_resourceidx < csi_MeasConfig->csi_ResourceConfigToAddModList->list.count; csi_resourceidx++) {
if ( csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_ResourceConfigId != csi_ResourceConfigId)
continue;
else {
//Finding the CSI_RS or SSB Resources
UE_info->csi_report_template[UE_id][csi_report_id].CSI_Resource_type= csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.present;
if (NR_CSI_ResourceConfig__csi_RS_ResourceSetList_PR_nzp_CSI_RS_SSB ==UE_info->csi_report_template[UE_id][csi_report_id].CSI_Resource_type){
struct NR_CSI_ResourceConfig__csi_RS_ResourceSetList__nzp_CSI_RS_SSB * nzp_CSI_RS_SSB = csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB;
UE_info->csi_report_template[UE_id][csi_report_id].nb_of_nzp_csi_report = nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList!=NULL ? nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.count:0;
UE_info->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report = nzp_CSI_RS_SSB->csi_SSB_ResourceSetList!=NULL ? nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.count:0;
}
if (0 != UE_info->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report){
uint8_t nb_ssb_resources =0;
for ( csi_ssb_idx = 0; csi_ssb_idx < csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.count; csi_ssb_idx++) {
if (csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceSetId ==
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.array[0])) { ///We can configure only one SSB resource set from spec 38.331 IE CSI-ResourceConfig
if (NR_CSI_ReportConfig__groupBasedBeamReporting_PR_disabled ==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.present ) {
if (NULL != csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri = *(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)+1;
else
/*! From Spec 38.331
* nrofReportedRS
* The number (N) of measured RS resources to be reported per report setting in a non-group-based report. N <= N_max, where N_max is either 2 or 4 depending on UE
* capability. FFS: The signaling mechanism for the gNB to select a subset of N beams for the UE to measure and report.
* When the field is absent the UE applies the value 1
*/
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri= 1;
}else
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri= 2;
nb_ssb_resources= csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceList.list.count;
if (nb_ssb_resources){
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen =ceil(log2 (nb_ssb_resources));
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen = 7; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen =4; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
}
else{
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen =0;
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen = 0;
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen =0;
}
LOG_I (MAC, "UCI: CSI_bit len : ssbri %d, rsrp: %d, diff_rsrp: %d",
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen,
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen,
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen);
break ;
}
}
}
if (0 != UE_info->csi_report_template[UE_id][csi_report_id].nb_of_nzp_csi_report){
AssertFatal(1==0,"Currently configuring only SSB beamreporting.");
}
break;
}
}
}
}
void nr_csi_meas_reporting(int Mod_idP,
int UE_id,
frame_t frame,
sub_frame_t slot,
int slots_per_tdd,
int ul_slots,
int n_slots_frame) {
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
NR_sched_pucch *curr_pucch;
NR_PUCCH_ResourceSet_t *pucchresset;
NR_CSI_ReportConfig_t *csirep;
NR_CellGroupConfig_t *secondaryCellGroup = UE_info->secondaryCellGroup[UE_id];
NR_CSI_MeasConfig_t *csi_measconfig = secondaryCellGroup->spCellConfig->spCellConfigDedicated->csi_MeasConfig->choice.setup;
NR_BWP_Uplink_t *ubwp=secondaryCellGroup->spCellConfig->spCellConfigDedicated->uplinkConfig->uplinkBWP_ToAddModList->list.array[0];
NR_PUCCH_Config_t *pucch_Config = ubwp->bwp_Dedicated->pucch_Config->choice.setup;
AssertFatal(csi_measconfig->csi_ReportConfigToAddModList->list.count>0,"NO CSI report configuration available");
for (int csi_report_id = 0; csi_report_id < csi_measconfig->csi_ReportConfigToAddModList->list.count; csi_report_id++){
csirep = csi_measconfig->csi_ReportConfigToAddModList->list.array[csi_report_id];
AssertFatal(csirep->reportConfigType.choice.periodic!=NULL,"Only periodic CSI reporting is implemented currently");
int period, offset, sched_slot;
csi_period_offset(csirep,&period,&offset);
sched_slot = (period+offset)%n_slots_frame;
// prepare to schedule csi measurement reception according to 5.2.1.4 in 38.214
// preparation is done in first slot of tdd period
if ( (frame%(period/n_slots_frame)==(offset/n_slots_frame)) && (slot==((sched_slot/slots_per_tdd)*slots_per_tdd))) {
// we are scheduling pucch for csi in the first pucch occasion (this comes before ack/nack)
curr_pucch = &UE_info->UE_sched_ctrl[UE_id].sched_pucch[sched_slot-slots_per_tdd+ul_slots][0];
NR_PUCCH_CSI_Resource_t *pucchcsires = csirep->reportConfigType.choice.periodic->pucch_CSI_ResourceList.list.array[0];
int found = -1;
pucchresset = pucch_Config->resourceSetToAddModList->list.array[1]; // set with formats >1
int n_list = pucchresset->resourceList.list.count;
for (int i=0; i<n_list; i++) {
if (*pucchresset->resourceList.list.array[i] == pucchcsires->pucch_Resource)
found = i;
}
AssertFatal(found>-1,"CSI resource not found among PUCCH resources");
curr_pucch->resource_indicator = found;
n_list = pucch_Config->resourceToAddModList->list.count;
// going through the list of PUCCH resources to find the one indexed by resource_id
for (int i=0; i<n_list; i++) {
NR_PUCCH_Resource_t *pucchres = pucch_Config->resourceToAddModList->list.array[i];
if (pucchres->pucch_ResourceId == *pucchresset->resourceList.list.array[found]) {
switch(pucchres->format.present){
case NR_PUCCH_Resource__format_PR_format2:
if (pucch_Config->format2->choice.setup->simultaneousHARQ_ACK_CSI == NULL)
curr_pucch->simultaneous_harqcsi = false;
else
curr_pucch->simultaneous_harqcsi = true;
break;
case NR_PUCCH_Resource__format_PR_format3:
if (pucch_Config->format3->choice.setup->simultaneousHARQ_ACK_CSI == NULL)
curr_pucch->simultaneous_harqcsi = false;
else
curr_pucch->simultaneous_harqcsi = true;
break;
case NR_PUCCH_Resource__format_PR_format4:
if (pucch_Config->format4->choice.setup->simultaneousHARQ_ACK_CSI == NULL)
curr_pucch->simultaneous_harqcsi = false;
else
curr_pucch->simultaneous_harqcsi = true;
break;
default:
AssertFatal(1==0,"Invalid PUCCH format type");
}
}
}
curr_pucch->csi_bits += nr_get_csi_bitlen(Mod_idP,UE_id,csi_report_id); // TODO function to compute CSI meas report bit size
curr_pucch->frame = frame;
curr_pucch->ul_slot = sched_slot;
}
}
}
// function to update pucch scheduling parameters in UE list when a USS DL is scheduled
void nr_acknack_scheduling(int Mod_idP,
int UE_id,
frame_t frameP,
sub_frame_t slotP,
int slots_per_tdd,
int *pucch_id,
int *pucch_occ) {
NR_ServingCellConfigCommon_t *scc = RC.nrmac[Mod_idP]->common_channels->ServingCellConfigCommon;
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
NR_sched_pucch *curr_pucch;
int max_acknacks,pucch_res,first_ul_slot_tdd,k,i,l;
uint8_t pdsch_to_harq_feedback[8];
int found = 0;
int nr_ulmix_slots = scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSlots;
if (scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSymbols!=0)
nr_ulmix_slots++;
bool csi_pres=false;
for (k=0; k<nr_ulmix_slots; k++) {
if(UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][0].csi_bits>0)
csi_pres=true;
}
// As a preference always schedule ack nacks in PUCCH0 (max 2 per slots)
// Unless there is CSI meas reporting scheduled in the period to avoid conflicts in the same slot
if (csi_pres)
max_acknacks=10;
else
max_acknacks=2;
// this is hardcoded for now as ue specific
NR_SearchSpace__searchSpaceType_PR ss_type = NR_SearchSpace__searchSpaceType_PR_ue_Specific;
get_pdsch_to_harq_feedback(Mod_idP,UE_id,ss_type,pdsch_to_harq_feedback);
// for each possible ul or mixed slot
for (k=0; k<nr_ulmix_slots; k++) {
for (l=0; l<1; l++) { // scheduling 2 PUCCH in a single slot does not work with the phone, currently
curr_pucch = &UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][l];
//if it is possible to schedule acknack in current pucch (no exclusive csi pucch)
if ((curr_pucch->csi_bits == 0) || (curr_pucch->simultaneous_harqcsi==true)) {
// if there is free room in current pucch structure
if (curr_pucch->dai_c<max_acknacks) {
pucch_res = get_pucch_resource(UE_info,UE_id,k,l);
if (pucch_res>-1){
curr_pucch->resource_indicator = pucch_res;
curr_pucch->frame = frameP;
// first pucch occasion in first UL or MIXED slot
first_ul_slot_tdd = scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSlots;
i = 0;
while (i<8 && found == 0) { // look if timing indicator is among allowed values
if (pdsch_to_harq_feedback[i]==(first_ul_slot_tdd+k)-(slotP % slots_per_tdd))
found = 1;
if (found == 0) i++;
}
if (found == 1) {
// computing slot in which pucch is scheduled
curr_pucch->dai_c++;
curr_pucch->ul_slot = first_ul_slot_tdd + k + (slotP - (slotP % slots_per_tdd));
curr_pucch->timing_indicator = i; // index in the list of timing indicators
*pucch_id = k;
*pucch_occ = l;
return;
}
}
}
}
}
}
AssertFatal(1==0,"No Uplink slot available in accordance to allowed timing indicator\n");
}
int get_pucch_resource(NR_UE_info_t *UE_info,int UE_id,int k,int l) {
// to be updated later, for now simple implementation
// use the second allocation just in case there is csi in the first
// in that case use second resource (for a different symbol) see 9.2 in 38.213
if (l==1) {
if (UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][0].csi_bits==0)
return -1;
else
return 1;
}
else
return 0;
}
void find_aggregation_candidates(uint8_t *aggregation_level, void find_aggregation_candidates(uint8_t *aggregation_level,
uint8_t *nr_of_candidates, uint8_t *nr_of_candidates,
NR_SearchSpace_t *ss) { NR_SearchSpace_t *ss) {
......
openair2/LAYER2/NR_MAC_gNB/gNB_scheduler_uci.c 0 → 100644
View file @ 82c4380a
/*
* Licensed to the OpenAirInterface (OAI) Software Alliance under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The OpenAirInterface Software Alliance licenses this file to You under
* the OAI Public License, Version 1.1 (the "License"); you may not use this file
* except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.openairinterface.org/?page_id=698
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*-------------------------------------------------------------------------------
* For more information about the OpenAirInterface (OAI) Software Alliance:
* contact@openairinterface.org
*/
/*! \file gNB_scheduler_uci.c
* \brief MAC procedures related to UCI
* \date 2020
* \version 1.0
* \company Eurecom
*/
#include "LAYER2/MAC/mac.h"
#include "NR_MAC_gNB/nr_mac_gNB.h"
#include "NR_MAC_COMMON/nr_mac_extern.h"
#include "NR_MAC_gNB/mac_proto.h"
#include "common/ran_context.h"
extern RAN_CONTEXT_t RC;
void nr_schedule_pucch(int Mod_idP,
int UE_id,
int nr_ulmix_slots,
frame_t frameP,
sub_frame_t slotP) {
uint16_t O_csi, O_ack, O_uci;
uint8_t O_sr = 0; // no SR in PUCCH implemented for now
NR_ServingCellConfigCommon_t *scc = RC.nrmac[Mod_idP]->common_channels->ServingCellConfigCommon;
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
AssertFatal(UE_info->active[UE_id],"Cannot find UE_id %d is not active\n",UE_id);
NR_CellGroupConfig_t *secondaryCellGroup = UE_info->secondaryCellGroup[UE_id];
int bwp_id=1;
NR_BWP_Uplink_t *ubwp=secondaryCellGroup->spCellConfig->spCellConfigDedicated->uplinkConfig->uplinkBWP_ToAddModList->list.array[bwp_id-1];
nfapi_nr_ul_tti_request_t *UL_tti_req = &RC.nrmac[Mod_idP]->UL_tti_req[0];
NR_sched_pucch *curr_pucch;
for (int k=0; k<nr_ulmix_slots; k++) {
for (int l=0; l<2; l++) {
curr_pucch = &UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][l];
O_ack = curr_pucch->dai_c;
O_csi = curr_pucch->csi_bits;
O_uci = O_ack + O_csi + O_sr;
if ((O_uci>0) && (frameP == curr_pucch->frame) && (slotP == curr_pucch->ul_slot)) {
UL_tti_req->SFN = curr_pucch->frame;
UL_tti_req->Slot = curr_pucch->ul_slot;
UL_tti_req->pdus_list[UL_tti_req->n_pdus].pdu_type = NFAPI_NR_UL_CONFIG_PUCCH_PDU_TYPE;
UL_tti_req->pdus_list[UL_tti_req->n_pdus].pdu_size = sizeof(nfapi_nr_pucch_pdu_t);
nfapi_nr_pucch_pdu_t *pucch_pdu = &UL_tti_req->pdus_list[UL_tti_req->n_pdus].pucch_pdu;
memset(pucch_pdu,0,sizeof(nfapi_nr_pucch_pdu_t));
UL_tti_req->n_pdus+=1;
LOG_D(MAC,"Scheduling pucch reception for frame %d slot %d with (%d, %d, %d) (SR ACK, CSI) bits\n",
frameP,slotP,O_sr,O_ack,curr_pucch->csi_bits);
nr_configure_pucch(pucch_pdu,
scc,
ubwp,
UE_info->rnti[UE_id],
curr_pucch->resource_indicator,
O_csi,
O_ack,
O_sr);
memset((void *) &UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][l],
0,
sizeof(NR_sched_pucch));
}
}
}
}
//!TODO : same function can be written to handle csi_resources
void compute_csi_bitlen (NR_CellGroupConfig_t *secondaryCellGroup, NR_UE_info_t *UE_info, int UE_id) {
uint8_t csi_report_id = 0;
uint8_t csi_resourceidx =0;
uint8_t csi_ssb_idx =0;
NR_CSI_MeasConfig_t *csi_MeasConfig = secondaryCellGroup->spCellConfig->spCellConfigDedicated->csi_MeasConfig->choice.setup;
NR_CSI_ResourceConfigId_t csi_ResourceConfigId;
for (csi_report_id=0; csi_report_id < csi_MeasConfig->csi_ReportConfigToAddModList->list.count; csi_report_id++){
csi_ResourceConfigId=csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->resourcesForChannelMeasurement;
UE_info->csi_report_template[UE_id][csi_report_id].reportQuantity_type = csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->reportQuantity.present;
for ( csi_resourceidx = 0; csi_resourceidx < csi_MeasConfig->csi_ResourceConfigToAddModList->list.count; csi_resourceidx++) {
if ( csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_ResourceConfigId != csi_ResourceConfigId)
continue;
else {
//Finding the CSI_RS or SSB Resources
UE_info->csi_report_template[UE_id][csi_report_id].CSI_Resource_type= csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.present;
if (NR_CSI_ResourceConfig__csi_RS_ResourceSetList_PR_nzp_CSI_RS_SSB ==UE_info->csi_report_template[UE_id][csi_report_id].CSI_Resource_type){
struct NR_CSI_ResourceConfig__csi_RS_ResourceSetList__nzp_CSI_RS_SSB * nzp_CSI_RS_SSB = csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB;
UE_info->csi_report_template[UE_id][csi_report_id].nb_of_nzp_csi_report = nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList!=NULL ? nzp_CSI_RS_SSB->nzp_CSI_RS_ResourceSetList->list.count:0;
UE_info->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report = nzp_CSI_RS_SSB->csi_SSB_ResourceSetList!=NULL ? nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.count:0;
}
if (0 != UE_info->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report){
uint8_t nb_ssb_resources =0;
for ( csi_ssb_idx = 0; csi_ssb_idx < csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.count; csi_ssb_idx++) {
if (csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceSetId ==
*(csi_MeasConfig->csi_ResourceConfigToAddModList->list.array[csi_resourceidx]->csi_RS_ResourceSetList.choice.nzp_CSI_RS_SSB->csi_SSB_ResourceSetList->list.array[0])) {
///We can configure only one SSB resource set from spec 38.331 IE CSI-ResourceConfig
if (NR_CSI_ReportConfig__groupBasedBeamReporting_PR_disabled ==
csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.present ) {
if (NULL != csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri = *(csi_MeasConfig->csi_ReportConfigToAddModList->list.array[csi_report_id]->groupBasedBeamReporting.choice.disabled->nrofReportedRS)+1;
else
/*! From Spec 38.331
* nrofReportedRS
* The number (N) of measured RS resources to be reported per report setting in a non-group-based report. N <= N_max, where N_max is either 2 or 4 depending on UE
* capability. FFS: The signaling mechanism for the gNB to select a subset of N beams for the UE to measure and report.
* When the field is absent the UE applies the value 1
*/
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri= 1;
} else
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].nb_ssbri_cri= 2;
nb_ssb_resources= csi_MeasConfig->csi_SSB_ResourceSetToAddModList->list.array[csi_ssb_idx]->csi_SSB_ResourceList.list.count;
if (nb_ssb_resources){
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen =ceil(log2 (nb_ssb_resources));
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen = 7; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen =4; //From spec 38.212 Table 6.3.1.1.2-6: CRI, SSBRI, and RSRP
}
else{
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen =0;
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen = 0;
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen =0;
}
LOG_I (MAC, "UCI: CSI_bit len : ssbri %d, rsrp: %d, diff_rsrp: %d",
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].cri_ssbri_bitlen,
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].rsrp_bitlen,
UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0].diff_rsrp_bitlen);
break ;
}
}
}
if (0 != UE_info->csi_report_template[UE_id][csi_report_id].nb_of_nzp_csi_report)
AssertFatal(1==0,"Currently configuring only SSB beamreporting.");
break;
}
}
}
}
uint16_t nr_get_csi_bitlen(int Mod_idP,
int UE_id,
uint8_t csi_report_id) {
uint16_t csi_bitlen =0;
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
CRI_SSBRI_RSRP_bitlen_t * CSI_report_bitlen = NULL;
CSI_report_bitlen = &(UE_info->csi_report_template[UE_id][csi_report_id].CSI_report_bitlen[0]);
csi_bitlen = ((CSI_report_bitlen->cri_ssbri_bitlen * CSI_report_bitlen->nb_ssbri_cri) +
CSI_report_bitlen->rsrp_bitlen +(CSI_report_bitlen->diff_rsrp_bitlen *
(CSI_report_bitlen->nb_ssbri_cri -1 )) *UE_info->csi_report_template[UE_id][csi_report_id].nb_of_csi_ssb_report);
return csi_bitlen;
}
void nr_csi_meas_reporting(int Mod_idP,
int UE_id,
frame_t frame,
sub_frame_t slot,
int slots_per_tdd,
int ul_slots,
int n_slots_frame) {
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
NR_sched_pucch *curr_pucch;
NR_PUCCH_ResourceSet_t *pucchresset;
NR_CSI_ReportConfig_t *csirep;
NR_CellGroupConfig_t *secondaryCellGroup = UE_info->secondaryCellGroup[UE_id];
NR_CSI_MeasConfig_t *csi_measconfig = secondaryCellGroup->spCellConfig->spCellConfigDedicated->csi_MeasConfig->choice.setup;
NR_BWP_Uplink_t *ubwp=secondaryCellGroup->spCellConfig->spCellConfigDedicated->uplinkConfig->uplinkBWP_ToAddModList->list.array[0];
NR_PUCCH_Config_t *pucch_Config = ubwp->bwp_Dedicated->pucch_Config->choice.setup;
AssertFatal(csi_measconfig->csi_ReportConfigToAddModList->list.count>0,"NO CSI report configuration available");
for (int csi_report_id = 0; csi_report_id < csi_measconfig->csi_ReportConfigToAddModList->list.count; csi_report_id++){
csirep = csi_measconfig->csi_ReportConfigToAddModList->list.array[csi_report_id];
AssertFatal(csirep->reportConfigType.choice.periodic!=NULL,"Only periodic CSI reporting is implemented currently");
int period, offset, sched_slot;
csi_period_offset(csirep,&period,&offset);
sched_slot = (period+offset)%n_slots_frame;
// prepare to schedule csi measurement reception according to 5.2.1.4 in 38.214
// preparation is done in first slot of tdd period
if ( (frame%(period/n_slots_frame)==(offset/n_slots_frame)) && (slot==((sched_slot/slots_per_tdd)*slots_per_tdd))) {
// we are scheduling pucch for csi in the first pucch occasion (this comes before ack/nack)
curr_pucch = &UE_info->UE_sched_ctrl[UE_id].sched_pucch[sched_slot-slots_per_tdd+ul_slots][0];
NR_PUCCH_CSI_Resource_t *pucchcsires = csirep->reportConfigType.choice.periodic->pucch_CSI_ResourceList.list.array[0];
int found = -1;
pucchresset = pucch_Config->resourceSetToAddModList->list.array[1]; // set with formats >1
int n_list = pucchresset->resourceList.list.count;
for (int i=0; i<n_list; i++) {
if (*pucchresset->resourceList.list.array[i] == pucchcsires->pucch_Resource)
found = i;
}
AssertFatal(found>-1,"CSI resource not found among PUCCH resources");
curr_pucch->resource_indicator = found;
n_list = pucch_Config->resourceToAddModList->list.count;
// going through the list of PUCCH resources to find the one indexed by resource_id
for (int i=0; i<n_list; i++) {
NR_PUCCH_Resource_t *pucchres = pucch_Config->resourceToAddModList->list.array[i];
if (pucchres->pucch_ResourceId == *pucchresset->resourceList.list.array[found]) {
switch(pucchres->format.present){
case NR_PUCCH_Resource__format_PR_format2:
if (pucch_Config->format2->choice.setup->simultaneousHARQ_ACK_CSI == NULL)
curr_pucch->simultaneous_harqcsi = false;
else
curr_pucch->simultaneous_harqcsi = true;
break;
case NR_PUCCH_Resource__format_PR_format3:
if (pucch_Config->format3->choice.setup->simultaneousHARQ_ACK_CSI == NULL)
curr_pucch->simultaneous_harqcsi = false;
else
curr_pucch->simultaneous_harqcsi = true;
break;
case NR_PUCCH_Resource__format_PR_format4:
if (pucch_Config->format4->choice.setup->simultaneousHARQ_ACK_CSI == NULL)
curr_pucch->simultaneous_harqcsi = false;
else
curr_pucch->simultaneous_harqcsi = true;
break;
default:
AssertFatal(1==0,"Invalid PUCCH format type");
}
}
}
curr_pucch->csi_bits += nr_get_csi_bitlen(Mod_idP,UE_id,csi_report_id); // TODO function to compute CSI meas report bit size
curr_pucch->frame = frame;
curr_pucch->ul_slot = sched_slot;
}
}
}
void nr_rx_acknack(nfapi_nr_uci_pusch_pdu_t *uci_pusch,
nfapi_nr_uci_pucch_pdu_format_0_1_t *uci_01,
nfapi_nr_uci_pucch_pdu_format_2_3_4_t *uci_234,
NR_UL_IND_t *UL_info, NR_UE_sched_ctrl_t *sched_ctrl, NR_mac_stats_t *stats) {
// TODO
int max_harq_rounds = 4; // TODO define macro
if (uci_01 != NULL) {
// handle harq
int harq_idx_s = 0;
// iterate over received harq bits
for (int harq_bit = 0; harq_bit < uci_01->harq->num_harq; harq_bit++) {
// search for the right harq process
for (int harq_idx = harq_idx_s; harq_idx < NR_MAX_NB_HARQ_PROCESSES; harq_idx++) {
// if the gNB received ack with a good confidence
if ((UL_info->slot-1) == sched_ctrl->harq_processes[harq_idx].feedback_slot) {
if ((uci_01->harq->harq_list[harq_bit].harq_value == 1) &&
(uci_01->harq->harq_confidence_level == 0)) {
// toggle NDI and reset round
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
else
sched_ctrl->harq_processes[harq_idx].round++;
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
harq_idx_s = harq_idx + 1;
// if the max harq rounds was reached
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
stats->dlsch_errors++;
}
break;
}
// if feedback slot processing is aborted
else if (((UL_info->slot-1) > sched_ctrl->harq_processes[harq_idx].feedback_slot) &&
(sched_ctrl->harq_processes[harq_idx].is_waiting)) {
sched_ctrl->harq_processes[harq_idx].round++;
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
}
}
}
}
if (uci_234 != NULL) {
int harq_idx_s = 0;
int acknack;
// iterate over received harq bits
for (int harq_bit = 0; harq_bit < uci_234->harq.harq_bit_len; harq_bit++) {
acknack = ((uci_234->harq.harq_payload[harq_bit>>3])>>harq_bit)&0x01;
for (int harq_idx = harq_idx_s; harq_idx < NR_MAX_NB_HARQ_PROCESSES-1; harq_idx++) {
// if the gNB received ack with a good confidence or if the max harq rounds was reached
if ((UL_info->slot-1) == sched_ctrl->harq_processes[harq_idx].feedback_slot) {
// TODO add some confidence level for when there is no CRC
if ((uci_234->harq.harq_crc != 1) && acknack) {
// toggle NDI and reset round
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
else
sched_ctrl->harq_processes[harq_idx].round++;
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
harq_idx_s = harq_idx + 1;
// if the max harq rounds was reached
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
stats->dlsch_errors++;
}
break;
}
// if feedback slot processing is aborted
else if (((UL_info->slot-1) > sched_ctrl->harq_processes[harq_idx].feedback_slot) &&
(sched_ctrl->harq_processes[harq_idx].is_waiting)) {
sched_ctrl->harq_processes[harq_idx].round++;
if (sched_ctrl->harq_processes[harq_idx].round == max_harq_rounds) {
sched_ctrl->harq_processes[harq_idx].ndi ^= 1;
sched_ctrl->harq_processes[harq_idx].round = 0;
}
sched_ctrl->harq_processes[harq_idx].is_waiting = 0;
}
}
}
}
}
// function to update pucch scheduling parameters in UE list when a USS DL is scheduled
void nr_acknack_scheduling(int Mod_idP,
int UE_id,
frame_t frameP,
sub_frame_t slotP,
int slots_per_tdd,
int *pucch_id,
int *pucch_occ) {
NR_ServingCellConfigCommon_t *scc = RC.nrmac[Mod_idP]->common_channels->ServingCellConfigCommon;
NR_UE_info_t *UE_info = &RC.nrmac[Mod_idP]->UE_info;
NR_sched_pucch *curr_pucch;
int max_acknacks,pucch_res,first_ul_slot_tdd,k,i,l;
uint8_t pdsch_to_harq_feedback[8];
int found = 0;
int nr_ulmix_slots = scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSlots;
if (scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofUplinkSymbols!=0)
nr_ulmix_slots++;
bool csi_pres=false;
for (k=0; k<nr_ulmix_slots; k++) {
if(UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][0].csi_bits>0)
csi_pres=true;
}
// As a preference always schedule ack nacks in PUCCH0 (max 2 per slots)
// Unless there is CSI meas reporting scheduled in the period to avoid conflicts in the same slot
if (csi_pres)
max_acknacks=10;
else
max_acknacks=2;
// this is hardcoded for now as ue specific
NR_SearchSpace__searchSpaceType_PR ss_type = NR_SearchSpace__searchSpaceType_PR_ue_Specific;
get_pdsch_to_harq_feedback(Mod_idP,UE_id,ss_type,pdsch_to_harq_feedback);
// for each possible ul or mixed slot
for (k=0; k<nr_ulmix_slots; k++) {
for (l=0; l<1; l++) { // scheduling 2 PUCCH in a single slot does not work with the phone, currently
curr_pucch = &UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][l];
//if it is possible to schedule acknack in current pucch (no exclusive csi pucch)
if ((curr_pucch->csi_bits == 0) || (curr_pucch->simultaneous_harqcsi==true)) {
// if there is free room in current pucch structure
if (curr_pucch->dai_c<max_acknacks) {
pucch_res = get_pucch_resource(UE_info,UE_id,k,l);
if (pucch_res>-1){
curr_pucch->resource_indicator = pucch_res;
curr_pucch->frame = frameP;
// first pucch occasion in first UL or MIXED slot
first_ul_slot_tdd = scc->tdd_UL_DL_ConfigurationCommon->pattern1.nrofDownlinkSlots;
i = 0;
while (i<8 && found == 0) { // look if timing indicator is among allowed values
if (pdsch_to_harq_feedback[i]==(first_ul_slot_tdd+k)-(slotP % slots_per_tdd))
found = 1;
if (found == 0) i++;
}
if (found == 1) {
// computing slot in which pucch is scheduled
curr_pucch->dai_c++;
curr_pucch->ul_slot = first_ul_slot_tdd + k + (slotP - (slotP % slots_per_tdd));
curr_pucch->timing_indicator = i; // index in the list of timing indicators
*pucch_id = k;
*pucch_occ = l;
return;
}
}
}
}
}
}
AssertFatal(1==0,"No Uplink slot available in accordance to allowed timing indicator\n");
}
void csi_period_offset(NR_CSI_ReportConfig_t *csirep,
int *period, int *offset) {
NR_CSI_ReportPeriodicityAndOffset_PR p_and_o = csirep->reportConfigType.choice.periodic->reportSlotConfig.present;
switch(p_and_o){
case NR_CSI_ReportPeriodicityAndOffset_PR_slots4:
*period = 4;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots4;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots5:
*period = 5;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots5;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots8:
*period = 8;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots8;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots10:
*period = 10;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots10;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots16:
*period = 16;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots16;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots20:
*period = 20;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots20;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots40:
*period = 40;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots40;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots80:
*period = 80;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots80;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots160:
*period = 160;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots160;
break;
case NR_CSI_ReportPeriodicityAndOffset_PR_slots320:
*period = 320;
*offset = csirep->reportConfigType.choice.periodic->reportSlotConfig.choice.slots320;
break;
default:
AssertFatal(1==0,"No periodicity and offset resource found in CSI report");
}
}
int get_pucch_resource(NR_UE_info_t *UE_info,int UE_id,int k,int l) {
// to be updated later, for now simple implementation
// use the second allocation just in case there is csi in the first
// in that case use second resource (for a different symbol) see 9.2 in 38.213
if (l==1) {
if (UE_info->UE_sched_ctrl[UE_id].sched_pucch[k][0].csi_bits==0)
return -1;
else
return 1;
}
else
return 0;
}
uint16_t compute_pucch_prb_size(uint8_t format,
uint8_t nr_prbs,
uint16_t O_tot,
uint16_t O_csi,
NR_PUCCH_MaxCodeRate_t *maxCodeRate,
uint8_t Qm,
uint8_t n_symb,
uint8_t n_re_ctrl) {
uint16_t O_crc;
if (O_tot<12)
O_crc = 0;
else{
if (O_tot<20)
O_crc = 6;
else {
if (O_tot<360)
O_crc = 11;
else
AssertFatal(1==0,"Case for segmented PUCCH not yet implemented");
}
}
int rtimes100;
switch(*maxCodeRate){
case NR_PUCCH_MaxCodeRate_zeroDot08 :
rtimes100 = 8;
break;
case NR_PUCCH_MaxCodeRate_zeroDot15 :
rtimes100 = 15;
break;
case NR_PUCCH_MaxCodeRate_zeroDot25 :
rtimes100 = 25;
break;
case NR_PUCCH_MaxCodeRate_zeroDot35 :
rtimes100 = 35;
break;
case NR_PUCCH_MaxCodeRate_zeroDot45 :
rtimes100 = 45;
break;
case NR_PUCCH_MaxCodeRate_zeroDot60 :
rtimes100 = 60;
break;
case NR_PUCCH_MaxCodeRate_zeroDot80 :
rtimes100 = 80;
break;
default :
AssertFatal(1==0,"Invalid MaxCodeRate");
}
float r = (float)rtimes100/100;
if (O_csi == O_tot) {
if ((O_tot+O_csi)>(nr_prbs*n_re_ctrl*n_symb*Qm*r))
AssertFatal(1==0,"MaxCodeRate %.2f can't support %d UCI bits and %d CRC bits with %d PRBs",
r,O_tot,O_crc,nr_prbs);
else
return nr_prbs;
}
if (format==2){
// TODO fix this for multiple CSI reports
for (int i=1; i<=nr_prbs; i++){
if((O_tot+O_crc)<=(i*n_symb*Qm*n_re_ctrl*r) &&
(O_tot+O_crc)>((i-1)*n_symb*Qm*n_re_ctrl*r))
return i;
}
AssertFatal(1==0,"MaxCodeRate %.2f can't support %d UCI bits and %d CRC bits with at most %d PRBs",
r,O_tot,O_crc,nr_prbs);
}
else{
AssertFatal(1==0,"Not yet implemented");
}
}
openair2/LAYER2/NR_MAC_gNB/mac_proto.h
View file @ 82c4380a
...@@ -183,6 +183,9 @@ void nr_schedule_pucch(int Mod_idP, ...@@ -183,6 +183,9 @@ void nr_schedule_pucch(int Mod_idP,
frame_t frameP, frame_t frameP,
sub_frame_t slotP); sub_frame_t slotP);
void csi_period_offset(NR_CSI_ReportConfig_t *csirep,
int *period, int *offset);
void nr_csi_meas_reporting(int Mod_idP, void nr_csi_meas_reporting(int Mod_idP,
int UE_id, int UE_id,
frame_t frameP, frame_t frameP,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment