Skip to content

O
OpenXG-RAN
Commit 84a1c737 authored by Raymond Knopp's avatar Raymond Knopp
Browse files
Options

Merge remote-tracking branch 'origin/develop' into bugfix-48-L1L2signaling 

Conflicts:
	openair1/PHY/LTE_TRANSPORT/print_stats.c
	openair1/SCHED/phy_procedures_lte_eNb.c
	openair1/SCHED/phy_procedures_lte_ue.c
	targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.rrh.usrpb210.conf
	targets/PROJECTS/GENERIC-LTE-EPC/CONF/enb.band7.tm1.usrpb210.conf
parents 26f5d0d9 16b0ec39
Expand all Show whitespace changes
Inline Side-by-side
Showing with 19065 additions and 4198 deletions
.gitlab-ci.yml
View file @ 84a1c737
......@@ -8,6 +8,7 @@ job1:
- echo $EXTERNAL_SHARE_DIR
- echo $SHELL
- git rev-parse --abbrev-ref HEAD
- git_repo=`git config --get remote.origin.url`
- git_head=`git rev-parse HEAD`
- echo $git_head
- tmp=`git show-ref --head | grep $git_head`
......@@ -23,8 +24,8 @@ job1:
- echo $NRUNS_LTE_SOFTMODEM
- echo $TIMEOUT_CMD
- mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -c -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS $OAI_EXTRA_ARGS -g "$OAI_TEST_CASE_GROUP">& $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log
- python $OPENAIR_DIR/cmake_targets/autotests/run_exec_lte-softmodem_tests.py -r -5GRepo $git_repo -5GRepoHeadVersion $git_head -n $NFS_SHARE_DIR -u $OAI_USER -p $OAI_PASS `echo $OAI_EXTRA_ARGS` -g "$OAI_TEST_CASE_GROUP" --nrun_lte_softmodem $NRUNS_LTE_SOFTMODEM --timeout_cmd $TIMEOUT_CMD >& $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest.log
- mv $OPENAIR_DIR/cmake_targets/autotests/python_autotest_cleanup.log $OPENAIR_DIR/cmake_targets/autotests/log/python_autotest_cleanup.log
- sshpass -p "$OAI_PASS" rsync -az -e "ssh -o StrictHostKeyChecking=no " --rsync-path="mkdir -p $NFS_TEST_RESULTS_DIR && rsync" $OPENAIR_DIR/cmake_targets/autotests/log $OAI_USER@localhost:$NFS_TEST_RESULTS_DIR
......
cmake_targets/CMakeLists.txt
View file @ 84a1c737
......@@ -176,30 +176,53 @@ add_definitions(-DCMAKER)
set(CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3")
set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS} -g -DMALLOC_CHECK_=3 -O2")
Message("RF_BOARD is ${RF_BOARD}")
# Below has been put in comment because does not work with
# SVN authentication.
#
#find_package(Subversion)
#if(SUBVERSION_FOUND)
# Subversion_WC_INFO(${OPENAIR_DIR} openair)
# set (FIRMWARE_VERSION "${openair_WC_REVISION} - ${openair_WC_LAST_CHANGED_DATE}")
# Subversion_WC_LOG(${OPENAIR_DIR} Project)
#else()
# set (FIRMWARE_VERSION "No svn information")
#endif()
#add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
set(GIT_BRANCH "UNKNOWN")
set(GIT_COMMIT_HASH "UNKNOWN")
set(GIT_COMMIT_DATE "UNKNOWN")
find_package(Git)
if(GIT_FOUND)
message("git found: ${GIT_EXECUTABLE}")
# Get the current working branch
execute_process(
COMMAND git rev-parse --abbrev-ref HEAD
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_BRANCH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest abbreviated commit hash of the working branch
execute_process(
COMMAND git log -1 --format=%h
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_HASH
OUTPUT_STRIP_TRAILING_WHITESPACE
)
# Get the latest commit date of the working branch
execute_process(
COMMAND git log -1 --format=%cd
WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
OUTPUT_VARIABLE GIT_COMMIT_DATE
OUTPUT_STRIP_TRAILING_WHITESPACE
)
endif()
# Below is a hard-coded info
set (FIRMWARE_VERSION "No svn information")
add_definitions("-DFIRMWARE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_VERSION=\"${FIRMWARE_VERSION}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"OpenAirInterface web site\"")
add_definitions("-DPACKAGE_VERSION=\"Branch: ${GIT_BRANCH} Abrev. Hash: ${GIT_COMMIT_HASH} Date: ${GIT_COMMIT_DATE}\"")
add_definitions("-DPACKAGE_BUGREPORT=\"openair4g-devel@lists.eurecom.fr\"")
# Debug related options
#########################################
add_boolean_option(ASN_DEBUG False "ASN1 coder/decoder Debug")
add_boolean_option(EMIT_ASN_DEBUG False "ASN1 coder/decoder Debug")
add_boolean_option(MSG_PRINT False "print debug messages")
add_boolean_option(DISABLE_XER_PRINT False "print XER Format")
add_boolean_option(XER_PRINT False "print XER Format")
......@@ -322,6 +345,7 @@ set(S1AP_OAI_generated
${S1AP_C_DIR}/s1ap_decoder.c
${S1AP_C_DIR}/s1ap_encoder.c
${S1AP_C_DIR}/s1ap_xer_print.c
${S1AP_C_DIR}/s1ap_compare.c
${S1AP_C_DIR}/s1ap_ies_defs.h
)
file(GLOB s1ap_h ${S1AP_C_DIR}/*.h)
......@@ -1086,7 +1110,6 @@ add_library(CN_UTILS
${OPENAIR3_DIR}/UTILS/conversions.c
${OPENAIR3_DIR}/UTILS/enum_string.c
${OPENAIR3_DIR}/UTILS/log.c
${OPENAIR3_DIR}/UTILS/mme_config.c
${OPENAIR3_DIR}/UTILS/mcc_mnc_itu.c
)
......@@ -1427,6 +1450,9 @@ include(FindPkgConfig)
pkg_search_module(LIBXML2 libxml-2.0 REQUIRED)
include_directories(${LIBXML2_INCLUDE_DIRS})
pkg_search_module(LIBXSLT libxslt REQUIRED)
include_directories(${LIBXSLT_INCLUDE_DIRS})
pkg_search_module(OPENSSL openssl REQUIRED)
include_directories(${OPENSSL_INCLUDE_DIRS})
......@@ -1718,6 +1744,7 @@ endforeach(myExe)
add_executable(test_epc_generate_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.c
${OPENAIR3_DIR}/TEST/EPC_TEST/generate_scenario.h
${OPENAIR2_DIR}/ENB_APP/enb_config.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
......@@ -1726,7 +1753,28 @@ add_executable(test_epc_generate_scenario
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_link_libraries (test_epc_generate_scenario
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
-Wl,--start-group RRC_LIB S1AP_LIB S1AP_ENB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} L2 -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
add_executable(test_epc_play_scenario
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_decode.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_display.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_fsm.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_parse.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_compare_ie.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_s1ap_eNB_defs.h
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario_sctp.c
${OPENAIR3_DIR}/TEST/EPC_TEST/play_scenario.h
${OPENAIR2_DIR}/COMMON/commonDef.h
${OPENAIR2_DIR}/COMMON/messages_def.h
${OPENAIR2_DIR}/COMMON/messages_types.h
${OPENAIR_BIN_DIR}/messages_xml.h
)
target_include_directories(test_epc_play_scenario PUBLIC /usr/local/share/asn1c)
target_link_libraries (test_epc_play_scenario
-Wl,--start-group RRC_LIB S1AP_LIB X2AP_LIB GTPV1U LIB_NAS_UE SECU_CN UTIL HASHTABLE SCTP_CLIENT UDP SCHED_LIB PHY LFDS ${ITTI_LIB} ${MSC_LIB} -Wl,--end-group pthread m rt crypt sctp ${LIBXML2_LIBRARIES} ${LIBXSLT_LIBRARIES} ${CRYPTO_LIBRARIES} ${OPENSSL_LIBRARIES} ${NETTLE_LIBRARIES} ${CONFIG_LIBRARIES}
)
......
cmake_targets/autotests/README.txt
View file @ 84a1c737
......@@ -171,6 +171,41 @@ Obj.# Case# Test# Description
01 65 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 65 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 70 00 lte-softmodem tests with SoDeRa RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 70 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 70 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 70 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 70 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 70 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 70 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 75 00 lte-softmodem + RRH tests with B210 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 75 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 75 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 75 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 75 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 75 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 75 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 80 00 lte-softmodem + RRH tests with BladeRF RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 80 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 80 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 80 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 80 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 80 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 80 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 85 00 lte-softmodem + RRH tests with USRP X310 RF as eNB and ALU EPC w/ Bandrich COTS UE for TX/1RX
01 85 00 Band 7 FDD 5MHz UL Throughput for 300 sec for 1TX/1RX
01 85 01 Band 7 FDD 10MHz UL Throughput for 300 sec for 1TX/1RX
01 85 02 Band 7 FDD 20MHz UL Throughput for 300 sec for 1TX/1RX
01 85 03 Band 7 FDD 5MHz DL Throughput for 300 sec for 1TX/1RX
01 85 04 Band 7 FDD 10MHz DL Throughput for 300 sec for 1TX/1RX
01 85 05 Band 7 FDD 20MHz DL Throughput for 300 sec for 1TX/1RX
01 64 lte-softmodem-noS1 tests
02 Functional test case
......
cmake_targets/autotests/run_exec_autotests.bash
View file @ 84a1c737
......@@ -12,7 +12,7 @@ trap handle_ctrl_c INT
source $OPENAIR_DIR/cmake_targets/tools/test_helper
#SUDO="sudo -E "
SUDO="sudo -E -S"
tdir=$OPENAIR_DIR/cmake_targets/autotests
rm -fr $tdir/bin
mkdir -p $tdir/bin
......@@ -404,14 +404,12 @@ until [ -z "$1" ]
esac
done
if [ "$SET_PASSWORD" == "1" ]; then
mypassword=$passwd
else
read -s -p "Enter Password: " mypassword
if [ "$SET_PASSWORD" != "1" ]; then
read -s -p "Enter Password: " passwd
fi
tmpfile=`mktemp`
echo \'$passwd\' | $SUDO echo $HOME >& $tmpfile
echo $passwd | $SUDO echo $HOME > $tmpfile
tstsudo=`cat $tmpfile`
if [ "$tstsudo" != "$HOME" ]; then
echo "$USER might not have sudo privileges. Exiting"
......@@ -509,7 +507,7 @@ for search_expr in "${test_case_array[@]}"
if [ "$class" == "compilation" ]; then
test_compile "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags"
elif [ "$class" == "execution" ]; then
$SUDO killall -q oaisim_nos1
echo \'passwd\' | $SUDO killall -q oaisim_nos1
test_compile_and_run "$name" "$compile_prog" "$compile_prog_args" "$pre_exec" "$pre_exec_args" "$main_exec" "$main_exec_args" "search_array_true[@]" "$search_expr_false" "$nruns" "$pre_compile_prog" "$class" "$compile_prog_out" "$tags" "$mypassword" "$test_config_file"
else
echo "Unexpected class of test case...Skipping the test case $name ...."
......
cmake_targets/autotests/test_case_list.xml
View file @ 84a1c737
This source diff could not be displayed because it is too large. You can view the blob instead.
cmake_targets/autotests/tools/configure_cots_bandrich_ue.py
View file @ 84a1c737
......@@ -131,6 +131,7 @@ def start_ue () :
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add ' + gw + ' ppp0')
os.system('sleep 5')
os.system ('ping ' + gw)
break
except Exception, e:
......
cmake_targets/autotests/tools/configure_cots_huaweiE398_ue.py 0 → 100755
View file @ 84a1c737
#!/usr/bin/python
import time
import serial
import os
from pyroute2 import IPRoute
import sys
import re
import threading
import signal
import traceback
import os
import commands
# configure the serial connections (the parameters differs on the device you are connecting to)
#First we find an open port to work with
serial_port=''
ser=serial.Serial()
openair_dir = os.environ.get('OPENAIR_DIR')
if openair_dir == None:
print "Error getting OPENAIR_DIR environment variable"
sys.exit(1)
sys.path.append(os.path.expandvars('$OPENAIR_DIR/cmake_targets/autotests/tools/'))
from lib_autotest import *
def find_open_port():
global serial_port, ser
max_ports=100
if os.path.exists(serial_port) == True:
return serial_port
for port in range(0,100):
serial_port = '/dev/ttyUSB'+str(port)
if os.path.exists(serial_port) == True:
print 'New Serial Port : ' + serial_port
break
ser = serial.Serial(port=serial_port)
return
#serial_port = '/dev/ttyUSB2'
bandrich_ppd_config = os.environ.get('OPENAIR_DIR') + '/cmake_targets/autotests/tools/wdial.bandrich.conf'
exit_flag=0
def signal_handler(signal, frame):
print('You pressed Ctrl+C!')
print('Resetting the UE to detached state')
timeout=10
exit_flag=1
send_command('AT+CGATT=0' , 'OK' , timeout)
sys.exit(0)
signal.signal(signal.SIGINT, signal_handler)
#ser.open()
#ser.isOpen()
class pppThread (threading.Thread):
def __init__(self, threadID, name, counter):
threading.Thread.__init__(self)
self.threadID = threadID
self.name = name
self.counter = counter
def run(self):
print "Starting " + self.name
#Here we keep running pppd thread in indefinite loop as this script terminates sometimes
#while 1:
while 1:
time.sleep(5) #Hard coded, do not reduce this number!
print "Starting wvdial now..."
print 'exit_flag = ' + str(exit_flag)
send_command('AT+CGATT=1','OK', 300)
os.system('wvdial -C ' + bandrich_ppd_config + '' )
if exit_flag == 1:
print "Exit flag set to true. Exiting pppThread now"
print "Terminating wvdial now..."
def send_command (cmd, response, timeout):
count=0
sleep_duration = 1
print 'In function: send_command: cmd = <' + cmd + '> response: <' + response + '> \n'
global serial_port, ser
while count <= timeout:
try:
#Sometimes the port does not exist coz of reset in modem.
#In that case, we need to search for this port again
if os.path.exists(serial_port) == False:
find_open_port()
ser.write (cmd + '\r\n')
out = ''
time.sleep(sleep_duration)
count = count + sleep_duration
while ser.inWaiting() > 0:
out += ser.read(1)
print 'out = <' + out + '> response = <' + response + '> \n'
if re.search(response, out):
break
except Exception, e:
error = ' cmd : ' + cmd + ' response : ' + response
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
def start_ue () :
#print 'Enter your commands below.\r\nInsert "exit" to leave the application.'
timeout=60 #timeout in seconds
send_command('AT', 'OK' , timeout)
#send_command('AT+CFUN=1' , 'OK' , timeout)
#send_command('AT+CGATT=0' , 'OK' , timeout)
send_command('AT+CGATT=1','OK', 300)
#os.system('wvdial -C ' + bandrich_ppd_config + ' &' )
thread_ppp = pppThread(1, "ppp_thread", 1)
thread_ppp.start()
iface='ppp0'
while 1:
time.sleep ( 2)
#Now we check if ppp0 interface is up and running
try:
if exit_flag == 1:
break
ip = IPRoute()
idx = ip.link_lookup(ifname=iface)[0]
os.system ('route add ' + gw + ' ppp0')
os.system('sleep 5')
os.system ('ping ' + gw)
break
except Exception, e:
error = ' Interface ' + iface + 'does not exist...'
error = error + ' In function: ' + sys._getframe().f_code.co_name + ': *** Caught exception: ' + str(e.__class__) + " : " + str( e)
error = error + traceback.format_exc()
print error
thread_ppp.join()
def stop_ue():
timeout=60
os.system('killall wvdial')
send_command('AT', 'OK' , timeout)
send_command('AT+CGATT=0' , 'OK|ERROR' , timeout)
#send_command('AT+CFUN=4' , 'OK' , timeout)
#reset the USB BUS of Bandrich UE
def reset_ue():
stringIdBandrich='Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard'
status, out = commands.getstatusoutput('lsusb | grep -i \'' + stringIdBandrich + '\'')
if (out == '') :
print "Bandrich 4G LTE Adapter not found. Exiting now..."
sys.exit()
p=re.compile('Bus\s*(\w+)\s*Device\s*(\w+):\s*ID\s*(\w+):(\w+)')
res=p.findall(out)
BusId=res[0][0]
DeviceId=res[0][1]
VendorId=res[0][2]
ProductId=res[0][3]
usb_dir= find_usb_path(VendorId, ProductId)
print "Bandrich 4G LTE Adapter found in..." + usb_dir
cmd = "sudo sh -c \"echo 0 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 15" )
cmd = "sudo sh -c \"echo 1 > " + usb_dir + "/authorized\""
os.system(cmd + " ; sleep 30" )
i=1
gw='192.172.0.1'
while i < len(sys.argv):
arg=sys.argv[i]
if arg == '--start-ue' :
find_open_port()
print 'Using Serial port : ' + serial_port
start_ue()
elif arg == '--stop-ue' :
find_open_port()
print 'Using Serial port : ' + serial_port
stop_ue()
elif arg == '--reset-ue' :
reset_ue()
elif arg == '-gw' :
gw = sys.argv[i+1]
i=i+1
elif arg == '-h' :
print "--reset-ue: Reset the UE on USB Bus. Similar to unplugging and plugging the UE"
print "--stop-ue: Stop the UE. Send DETACH command"
print "--start-ue: Start the UE. Send ATTACH command"
print "-gw: Specify the default gw as sometimes the gateway/route arguments are not set properly via wvdial"
else :
print " Script called with wrong arguments, arg = " + arg
sys.exit()
i = i +1
cmake_targets/autotests/tools/search_repl.py
View file @ 84a1c737
......@@ -26,6 +26,9 @@ if keyword == 'mme_ip_address':
elif keyword == 'IPV4_LIST':
replacement_text = keyword + ' = ( ' + replacement_text + ' ) ; '
string = re.sub(r"IPV4_LIST\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
elif keyword == 'rrh_gw_config':
replacement_text = keyword + ' = ( { ' + replacement_text + ' } ) ; '
string = re.sub(r"rrh_gw_config\s*=\s*\(([^\$]+?)\)\s*;", replacement_text, string, re.M)
else :
replacement_text = keyword + ' = ' + replacement_text + ' ; '
string = re.sub(r"%s\s*=\s*([^\$]+?)\s*;" % keyword , replacement_text, string, re.M)
......
cmake_targets/build_oai
View file @ 84a1c737
......@@ -42,13 +42,13 @@ THIS_SCRIPT_PATH=$(dirname $(readlink -f $0))
source $THIS_SCRIPT_PATH/tools/build_helper
MSC_GEN="False"
XFORMS="False"
XFORMS="True"
PRINT_STATS="False"
VCD_TIMING="False"
LOWLATENCY_FLAG_USER="False"
FORCE_LOWLATENCY_FLAG_USER=""
REL="Rel10"
HW="EXMIMO"
HW="None"
TP="None"
NOS1=0
EPC=0
......@@ -91,7 +91,7 @@ Options
default is Rel10,
Rel8 limits the implementation to 3GPP Release 8 version
-w | --hardware
EXMIMO (Default), USRP, BLADERF, LMSSDR, None
EXMIMO, USRP, BLADERF, ETHERNET, LMSSDR, None (Default)
Adds this RF board support (in external packages installation and in compilation)
-t | --transport protocol
ETHERNET , None
......@@ -760,9 +760,9 @@ fi
rm -fr $OPENAIR_DIR/cmake_targets/autotests/log
mkdir -p $OPENAIR_DIR/cmake_targets/autotests/log
if [ "$RUN_GROUP" -eq "1" ]; then
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -g "$TEST_CASE_GROUP" -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
else
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p '$mypassword' >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
$OPENAIR_DIR/cmake_targets/autotests/run_exec_autotests.bash -p $mypassword >& $OPENAIR_DIR/cmake_targets/autotests/log/autotests.log &
fi
wait
else
......
cmake_targets/epc_test/CMakeLists.template
View file @ 84a1c737
cmake_minimum_required(VERSION 2.8)
set ( CMAKE_BUILD_TYPE "RelWithDebInfo" )
set ( ASN_DEBUG False)
set ( ADDR_CONF False )
set ( DEBUG_OMG False )
set ( DISABLE_XER_PRINT False )
set ( DRIVER2013 True )
set ( EMOS False )
set ( EMIT_ASN_DEBUG False )
set ( ENABLE_FXP True )
set ( ENABLE_ITTI True )
set ( ENABLE_NAS_UE_LOGGING True )
......@@ -47,9 +49,9 @@ set ( OAI_EMU False )
set ( OAISIM False )
set ( OAI_NW_DRIVER_TYPE_ETHERNET False )
set ( OAI_NW_DRIVER_USE_NETLINK True )
set ( OPENAIR1 False )
set ( OPENAIR2 False )
set ( OPENAIR_LTE F )
set ( OPENAIR1 True )
set ( OPENAIR2 True )
set ( OPENAIR_LTE True )
set ( PACKAGE_NAME "epc_test" )
set ( PBS_SIM False )
set ( PDCP_USE_NETLINK True )
......@@ -74,4 +76,4 @@ set ( SMBV False )
set ( TEST_OMG False )
set ( USE_MME "R10" )
set ( USER_MODE True )
set ( XER_PRINT False )
set ( XER_PRINT True )
cmake_targets/lte-simulators/CMakeLists.txt
View file @ 84a1c737
......@@ -2,7 +2,7 @@ cmake_minimum_required(VERSION 2.8)
set(PACKAGE_NAME "unitary_tests_simulators")
set(PHYSIM True)
set(RF_BOARD None)
set(XFORMS False)
set(XFORMS True)
set(DEBUG_PHY False)
set(MU_RECIEVER False)
......
cmake_targets/tools/build_helper
View file @ 84a1c737
......@@ -30,7 +30,7 @@
################################################################################
# file build_helper
# brief
# author Laurent Thomas
# authors Laurent Thomas, Lionel GAUTHIER
#
#######################################
SUDO='sudo -E'
......@@ -269,7 +269,9 @@ check_install_oai_software() {
pydb \
wvdial \
python-numpy \
sshpass
sshpass \
libxslt1-dev
$SUDO update-alternatives --set liblapack.so /usr/lib/atlas-base/atlas/liblapack.so
if [ `lsb_release -rs` = '12.04' ] ; then
install_nettle_from_source
......@@ -288,13 +290,15 @@ install_asn1c_from_source(){
asn1_install_dir=$OPENAIR_DIR/cmake_targets/log/asn1c_install_log.txt
echo_info "\nInstalling ASN1. The log file for ASN1 installation is here: $asn1_install_dir "
(
rm -rf /tmp/asn1c-r1516
$SUDO rm -rf /tmp/asn1c-r1516
mkdir -p /tmp/asn1c-r1516
cd /tmp/asn1c-r1516
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0
rm -rf /tmp/asn1c-r1516/*
svn co https://github.com/vlm/asn1c/trunk /tmp/asn1c-r1516 -r 1516 > /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_2.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair2/RRC/LITE/MESSAGES/asn1c/asn1cpatch.p0 >> /tmp/log_compile_asn1c
patch -p0 < $OPENAIR_DIR/openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 >> /tmp/log_compile_asn1c
./configure
make -j`nproc`
$SUDO make install
......@@ -324,7 +328,6 @@ install_nas_tools() {
}
################################
# set_openair_env
###############################
......
cmake_targets/tools/build_test_epc_tools
View file @ 84a1c737
......@@ -22,7 +22,7 @@
# Contact Information
# OpenAirInterface Admin: openair_admin@eurecom.fr
# OpenAirInterface Tech : openair_tech@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@eurecom.fr
# OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
#
# Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
#
......@@ -121,6 +121,7 @@ function main()
echo "Cleaning TEST_EPC"
fi
rm -f $OPENAIR_DIR/targets/bin/test_epc_generate_scenario
rm -f $OPENAIR_DIR/targets/bin/test_epc_play_scenario
rm -Rf build 2>&1
mkdir -m 777 -p -v build
fi
......@@ -140,6 +141,13 @@ function main()
compilations \
epc_test test_epc_generate_scenario \
test_epc_generate_scenario $dbin/test_epc_generate_scenario
compilations \
epc_test test_epc_play_scenario \
test_epc_play_scenario $dbin/test_epc_play_scenario
$SUDO cp -upv test_epc_generate_scenario /usr/local/bin
$SUDO cp -upv test_epc_play_scenario /usr/local/bin
}
......
cmake_targets/tools/run_enb_s1_usrp
View file @ 84a1c737
......@@ -29,9 +29,9 @@
################################################################################
# file run_enb_s1_usrp
# brief run script for eNB USRP.
# author Lionel GAUTHIER
# author Lionel GAUTHIER and Navid Nikaein
# company Eurecom
# email: lionel.gauthier@eurecom.fr
# email: lionel.gauthier@eurecom.fr and navid.nikaein@eurecom.fr
################################
......@@ -56,6 +56,8 @@ function help()
echo_error "Mandatory arguments to long options are mandatory for short options too."
echo_error " -g, --gdb Run with GDB."
echo_error " -h, --help Print this help."
echo_error " -e, --ulsch-max-errors num-errs maximum allowed number of uplink errors"
echo_error " -f, --rf-config-file filename RF specific configuration file"
echo_error " -K, --itti-dump-file filename ITTI dump file containing all ITTI events occuring during EPC runtime.(can omit file name if last argument)"
echo_error " -M, --target-dl-mcs mcs Downlink target MCS."
echo_error " -m, --mscgen directory Generate mscgen output files in a directory"
......@@ -137,6 +139,26 @@ function main()
shift;
exit 0
;;
-e | --ulsch-max-errors)
ulsch_max_errors=$2
echo "setting --ulsch-max-errors to $ulsch_max_errors"
exe_arguments="$exe_arguments --ulsch-max-errors=$ulsch_max_errors"
shift 2;
;;
-f | --rf-config-file)
rf_config_file=$2
# can omit file name if last arg on the line
if [ "x$rf_config_file" = "x" ]; then
rf_config_file=null
shift 1;
else
shift 2;
fi
if [ "$rf_config_file" != "null" ]; then
echo "setting --rf-config-file to $rf_config_file"
exe_arguments="$exe_arguments --rf-config-file=$rf_config_file"
fi
;;
-K | --itti-dump-file)
itti_dump_file=$2
# can omit file name if last arg on the line
......
cmake_targets/tools/stop_exmimo2
View file @ 84a1c737
......@@ -13,5 +13,5 @@ sudo -E $OPENAIR_DIR/cmake_targets/tools/init_exmimo2
#now we stop the card from transmitting anything
cd $OPENAIR_DIR/targets/bin
sudo -E octave $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
sudo -E octave -H --no-gui $OPENAIR_DIR/cmake_targets/tools/exmimo_stop_octave.m
openair1/PHY/LTE_ESTIMATION/adjust_gain.c
View file @ 84a1c737
......@@ -38,23 +38,16 @@ extern int card;
#endif
void
phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint8_t eNB_id)
phy_adjust_gain (PHY_VARS_UE *phy_vars_ue, uint32_t rx_power_fil_dB, uint8_t eNB_id)
{
uint16_t rx_power_fil_dB;
#ifdef EXMIMO
exmimo_config_t *p_exmimo_config = openair0_exmimo_pci[card].exmimo_config_ptr;
uint16_t i;
#endif
int rssi;
rssi = dB_fixed(phy_vars_ue->PHY_measurements.rssi);
if (rssi>0) rx_power_fil_dB = rssi;
else rx_power_fil_dB = phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id];
LOG_D(PHY,"Gain control: rssi %d (%d,%d)\n",
rssi,
rx_power_fil_dB,
phy_vars_ue->PHY_measurements.rssi,
phy_vars_ue->PHY_measurements.rx_power_avg_dB[eNB_id]
);
......
openair1/PHY/LTE_ESTIMATION/defs.h
View file @ 84a1c737
......@@ -213,6 +213,7 @@ int8_t set_RSRQ_filtered(module_id_t Mod_id,uint8_t CC_id,uint8_t eNB_index,floa
//! Automatic gain control
void phy_adjust_gain (PHY_VARS_UE *phy_vars_ue,
uint32_t rx_power_fil_dB,
unsigned char eNB_id);
int lte_ul_channel_estimation(PHY_VARS_eNB *phy_vars_eNB,
......
openair1/PHY/LTE_ESTIMATION/lte_sync_time.c
View file @ 84a1c737
......@@ -485,13 +485,10 @@ int lte_sync_time(int **rxdata, ///rx data in time domain
*eNB_id = sync_source;
#ifdef DEBUG_PHY
msg("[PHY][UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d\n",
sync_source,peak_pos,peak_val);
LOG_D(PHY,"[UE] lte_sync_time: Sync source = %d, Peak found at pos %d, val = %d (%d dB)\n",sync_source,peak_pos,peak_val,dB_fixed(peak_val)/2);
#ifdef DEBUG_PHY
if (debug_cnt == 0) {
write_output("sync_corr0_ue.m","synccorr0",sync_corr_ue0,2*length,1,2);
write_output("sync_corr1_ue.m","synccorr1",sync_corr_ue1,2*length,1,2);
......
openair1/PHY/LTE_TRANSPORT/initial_sync.c
View file @ 84a1c737
......@@ -280,7 +280,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
uint8_t flip_fdd_ncp,flip_fdd_ecp,flip_tdd_ncp,flip_tdd_ecp;
// uint16_t Nid_cell_fdd_ncp=0,Nid_cell_fdd_ecp=0,Nid_cell_tdd_ncp=0,Nid_cell_tdd_ecp=0;
LTE_DL_FRAME_PARMS *frame_parms = &phy_vars_ue->lte_frame_parms;
int i;
int ret=-1;
int aarx,rx_power=0;
/*#ifdef OAI_USRP
......@@ -309,34 +308,6 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
LOG_I(PHY,"[UE%d] Initial sync : Estimated PSS position %d, Nid2 %d\n",phy_vars_ue->Mod_id,sync_pos,phy_vars_ue->lte_ue_common_vars.eNb_id);
#endif
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(rx_power/frame_parms->nb_antennas_rx);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
#endif
#ifdef EXMIMO
if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
(mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,0);
#endif
#endif
#endif
#endif
// SSS detection
// PSS is hypothesized in last symbol of first slot in Frame
......@@ -525,20 +496,20 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
#endif
if (phy_vars_ue->UE_scan_carrier == 0) {
#ifdef OPENAIR2
if (phy_vars_ue->mac_enabled==1) {
LOG_I(PHY,"[UE%d] Sending synch status to higher layers\n",phy_vars_ue->Mod_id);
//mac_resynch();
mac_xface->dl_phy_sync_success(phy_vars_ue->Mod_id,phy_vars_ue->frame_rx,0,1);//phy_vars_ue->lte_ue_common_vars.eNb_id);
#endif //OPENAIR2
phy_vars_ue->UE_mode[0] = PRACH;
}
else {
phy_vars_ue->UE_mode[0] = PUSCH;
}
generate_pcfich_reg_mapping(frame_parms);
generate_phich_reg_mapping(frame_parms);
// init_prach625(frame_parms);
#ifndef OPENAIR2
phy_vars_ue->UE_mode[0] = PUSCH;
#else
phy_vars_ue->UE_mode[0] = PRACH;
#endif
//phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors=0;
phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_conseq=0;
//phy_vars_ue->lte_ue_pbch_vars[0]->pdu_errors_last=0;
......@@ -592,6 +563,65 @@ int initial_sync(PHY_VARS_UE *phy_vars_ue, runmode_t mode)
}
// gain control
if (ret!=0) { //we are not synched, so we cannot use rssi measurement (which is based on channel estimates)
rx_power = 0;
// do a measurement on the best guess of the PSS
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][sync_pos2],
frame_parms->ofdm_symbol_size+frame_parms->nb_prefix_samples);
/*
// do a measurement on the full frame
for (aarx=0; aarx<frame_parms->nb_antennas_rx; aarx++)
rx_power += signal_energy(&phy_vars_ue->lte_ue_common_vars.rxdata[aarx][0],
frame_parms->samples_per_tti*10);
*/
// we might add a low-pass filter here later
phy_vars_ue->PHY_measurements.rx_power_avg[0] = rx_power/frame_parms->nb_antennas_rx;
phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] = dB_fixed(phy_vars_ue->PHY_measurements.rx_power_avg[0]);
#ifdef DEBUG_INITIAL_SYNCH
LOG_I(PHY,"[UE%d] Initial sync : Estimated power: %d dB\n",phy_vars_ue->Mod_id,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0] );
#endif
#ifdef EXMIMO
if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
(mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,phy_vars_ue->PHY_measurements.rx_power_avg_dB[0],0);
#endif
#endif
#endif
#endif
}
else {
#ifdef EXMIMO
if ((openair_daq_vars.rx_gain_mode == DAQ_AGC_ON) &&
(mode != rx_calib_ue) && (mode != rx_calib_ue_med) && (mode != rx_calib_ue_byp) )
//phy_adjust_gain(phy_vars_ue,0);
gain_control_all(dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
#else
#ifndef OAI_USRP
#ifndef OAI_BLADERF
#ifndef OAI_LMSSDR
phy_adjust_gain(phy_vars_ue,dB_fixed(phy_vars_ue->PHY_measurements.rssi),0);
#endif
#endif
#endif
#endif
}
// exit_fun("debug exit");
return ret;
}
......
openair1/PHY/LTE_TRANSPORT/print_stats.c
View file @ 84a1c737
......@@ -107,10 +107,10 @@ int dump_ue_stats(PHY_VARS_UE *phy_vars_ue, char* buffer, int length, runmode_t
len += sprintf(&buffer[len], "[UE PROC] timing_advance = %d\n",phy_vars_ue->timing_advance);
if (phy_vars_ue->UE_mode[0]==PUSCH) {
len += sprintf(&buffer[len], "[UE PROC] Po_PUSCH = %d dBm (PL %d dB, Po_NOMINAL_PUSCH %d dBm, PHR %d dB)\n",
PHY_vars_UE_g[0][0]->ulsch_ue[0]->Po_PUSCH,
phy_vars_ue->ulsch_ue[0]->Po_PUSCH,
get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0),
mac_xface->get_Po_NOMINAL_PUSCH(phy_vars_ue->Mod_id,0),
PHY_vars_UE_g[0][0]->ulsch_ue[0]->PHR);
phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUSCH,
phy_vars_ue->ulsch_ue[0]->PHR);
len += sprintf(&buffer[len], "[UE PROC] Po_PUCCH = %d dBm (Po_NOMINAL_PUCCH %d dBm, g_pucch %d dB)\n",
get_PL(phy_vars_ue->Mod_id,phy_vars_ue->CC_id,0)+
phy_vars_ue->lte_frame_parms.ul_power_control_config_common.p0_NominalPUCCH+
......@@ -582,9 +582,7 @@ int dump_eNB_stats(PHY_VARS_eNB *phy_vars_eNB, char* buffer, int length)
len += sprintf(&buffer[len],"%4d ",
phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
if ((i>0) && ((i%25) == 0))
len += sprintf(&buffer[len],"\n ",
phy_vars_eNB->PHY_measurements_eNB[eNB].n0_subband_power_tot_dBm[i]);
len += sprintf(&buffer[len],"\n");
}
len += sprintf(&buffer[len],"\n");
len += sprintf(&buffer[len],"\nPERFORMANCE PARAMETERS\n");
......
openair1/PHY/TOOLS/cmult_mm.c deleted 100644 → 0
View file @ 26f5d0d9
/*******************************************************************************
OpenAirInterface
Copyright(c) 1999 - 2014 Eurecom
OpenAirInterface is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenAirInterface is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OpenAirInterface.The full GNU General Public License is
included in this distribution in the file called "COPYING". If not,
see <http://www.gnu.org/licenses/>.
Contact Information
OpenAirInterface Admin: openair_admin@eurecom.fr
OpenAirInterface Tech : openair_tech@eurecom.fr
OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
#include "defs.h"
int mult_cpx_matrix_h(short *x1[2][2],
short *x2[2][2],
short *y[2][2],
unsigned int N,
unsigned short output_shift,
short hermitian)
{
if (hermitian) {
// this computes x1^H*x2 and stores it in y
mult_cpx_vector_h(x2[0][0],x1[0][0],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x2[0][1],x1[0][1],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x2[0][0],x1[1][0],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x2[0][1],x1[1][1],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x2[1][0],x1[0][0],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x2[1][1],x1[0][1],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x2[1][0],x1[1][0],y[1][1],N,output_shift,1);
mult_cpx_vector_h(x2[1][1],x1[1][1],y[1][1],N,output_shift,1);
} else {
// this computes x1*x2^H and stores it in y
mult_cpx_vector_h(x1[0][0],x2[0][0],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x1[0][1],x2[0][1],y[0][0],N,output_shift,1);
mult_cpx_vector_h(x1[0][0],x2[1][0],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x1[0][1],x2[1][1],y[0][1],N,output_shift,1);
mult_cpx_vector_h(x1[1][0],x2[0][0],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x1[1][1],x2[0][1],y[1][0],N,output_shift,1);
mult_cpx_vector_h(x1[1][0],x2[1][0],y[1][1],N,output_shift,1);
mult_cpx_vector_h(x1[1][1],x2[1][1],y[1][1],N,output_shift,1);
}
}
int mult_cpx_matrix_vector(int *x1[2][2],
int *x2[2],
int *y[2],
unsigned int N,
unsigned short output_shift)
{
Zero_Buffer(y[0],N*8);
Zero_Buffer(y[1],N*8);
// this computes x1*x2 and stores it in y (32 bit)
mult_cpx_vector_add32((short*)x2[0],(short*)x1[0][0],(short*)y[0],N);
mult_cpx_vector_add32((short*)x2[1],(short*)x1[0][1],(short*)y[0],N);
mult_cpx_vector_add32((short*)x2[0],(short*)x1[1][0],(short*)y[1],N);
mult_cpx_vector_add32((short*)x2[1],(short*)x1[1][1],(short*)y[1],N);
// shift and pack
shift_and_pack((short*)y[0],N,output_shift);
shift_and_pack((short*)y[1],N,output_shift);
}
#ifdef MAIN_MM
#include <stdio.h>
#include <stdlib.h>
main ()
{
short x1_00[256] __attribute__((aligned(16)));
short x1_10[256] __attribute__((aligned(16)));
short x1_01[256] __attribute__((aligned(16)));
short x1_11[256] __attribute__((aligned(16)));
short x2_0[256] __attribute__((aligned(16)));
short x2_1[256] __attribute__((aligned(16)));
short y_0[256] __attribute__((aligned(16)));
short y_1[256] __attribute__((aligned(16)));
int *x1[2][2];
int *x2[2];
int *y[2];
int i,m,n;
x1[0][0] = (int*)x1_00;
x1[0][1] = (int*)x1_01;
x1[1][0] = (int*)x1_10;
x1[1][1] = (int*)x1_11;
x2[0] = (int*)x2_0;
x2[1] = (int*)x2_1;
y[0] = (int*)y_0;
y[1] = (int*)y_1;
for(m=0; m<2; m++) {
for(n=0; n<2; n++) {
for(i=0; i<256; i+=4) {
((short*)x1[m][n])[i] = ((short) rand())/4;
((short*)x1[m][n])[i+1] = ((short) rand())/4;
((short*)x1[m][n])[i+2] = -((short*)x1[m][n])[i+1];
((short*)x1[m][n])[i+3] = ((short*)x1[m][n])[i];
}
}
for(i=0; i<256; i+=4) {
((short*)x2[m])[i] = ((short) rand())/4;
((short*)x2[m])[i+1] = ((short) rand())/4;
((short*)x2[m])[i+2] = ((short*)x2[m])[i];
((short*)x2[m])[i+3] = ((short*)x2[m])[i+1];
}
Zero_Buffer(y[m],512);
}
/*
input[0] = 100;
input[1] = 200;
input[2] = -200;
input[3] = 100;
input[4] = 1000;
input[5] = 2000;
input[6] = -2000;
input[7] = 1000;
input[8] = 100;
input[9] = 200;
input[10] = -200;
input[11] = 100;
input[12] = 1000;
input[13] = 2000;
input[14] = -2000;
input[15] = 1000;
input2[0] = 2;
input2[1] = 1;
input2[2] = 2;
input2[3] = 1;
input2[4] = 20;
input2[5] = 10;
input2[6] = 20;
input2[7] = 10;
input2[8] = 2;
input2[9] = 1;
input2[10] = 2;
input2[11] = 1;
input2[12] = 2000;
input2[13] = 1000;
input2[14] = 2000;
input2[15] = 1000;
x1[0][0] = (int*)input;
x1[0][1] = (int*)input;
x1[1][0] = (int*)input;
x1[1][1] = (int*)input;
x2[0] = (int*)input2;
x2[1] = (int*)input2;
y[0] = (int*)output;
y[1] = (int*)output2;
*/
mult_cpx_matrix_vector(x1,x2,y,64,15);
//mult_cpx_vector_add32(x2[0],x1[0][0],y[0],64);
for (i=0; i<128; i+=2)
printf("i=%d, x1 = [%d+1i*%d %d+1i*%d; %d+1i*%d %d+1i*%d]; x2 = [%d+1i*%d; %d+1i*%d]; y = [%d+1i*%d; %d+1i*%d]; y_m= round(x1*x2./pow2(15)); y-y_m \n",
i,
((short*)x1[0][0])[2*i], ((short*)x1[0][0])[2*i+2],
((short*)x1[0][1])[2*i], ((short*)x1[0][1])[2*i+2],
((short*)x1[1][0])[2*i], ((short*)x1[1][0])[2*i+2],
((short*)x1[1][1])[2*i], ((short*)x1[1][1])[2*i+2],
((short*)x2[0])[2*i], ((short*)x2[0])[2*i+1],
((short*)x2[1])[2*i], ((short*)x2[1])[2*i+1],
((short*)y[0])[2*i], ((short*)y[0])[2*i+1],
((short*)y[1])[2*i], ((short*)y[1])[2*i+1]);
//((int*)y[0])[i], ((int*)y[0])[i+1],
//((int*)y[1])[i], ((int*)y[1])[i+1]);
}
#endif
openair1/PHY/TOOLS/cmult_vv.c
View file @ 84a1c737
......@@ -50,7 +50,7 @@ int mult_cpx_conj_vector(int16_t *x1,
uint32_t N,
int output_shift)
{
// Multiply elementwise two complex vectors of N elements with repeated formatted output
// Multiply elementwise the complex conjugate of x1 with x2.
// x1 - input 1 in the format |Re0 Im0 Re1 Im1|,......,|Re(N-2) Im(N-2) Re(N-1) Im(N-1)|
// We assume x1 with a dinamic of 15 bit maximum
//
......@@ -90,7 +90,7 @@ int mult_cpx_conj_vector(int16_t *x1,
tmp_im = _mm_shufflelo_epi16(*x1_128,_MM_SHUFFLE(2,3,0,1));
tmp_im = _mm_shufflehi_epi16(tmp_im,_MM_SHUFFLE(2,3,0,1));
tmp_im = _mm_sign_epi16(tmp_im,*(__m128i*)&conjug[0]);
tmp_im = _mm_madd_epi16(tmp_im,*x1_128);
tmp_im = _mm_madd_epi16(tmp_im,*x2_128);
tmp_re = _mm_srai_epi32(tmp_re,output_shift);
tmp_im = _mm_srai_epi32(tmp_im,output_shift);
tmpy0 = _mm_unpacklo_epi32(tmp_re,tmp_im);
......@@ -130,3 +130,4 @@ int mult_cpx_conj_vector(int16_t *x1,
return(0);
}
openair1/PHY/TOOLS/cmult_vvh.c deleted 100644 → 0
View file @ 26f5d0d9
This diff is collapsed.
openair1/PHY/TOOLS/defs.h
View file @ 84a1c737
This diff is collapsed.
openair1/PHY/TOOLS/lte_phy_scope.c
View file @ 84a1c737
......@@ -719,13 +719,13 @@ void phy_scope_UE(FD_lte_phy_scope_ue *form,
// PDSCH LLRs
if (pdsch_llr != NULL) {
for (i=0; i<coded_bits_per_codeword/4; i++) {
llr[i] = (float) pdsch_llr[4*i];
for (i=0; i<coded_bits_per_codeword; i++) {
llr[i] = (float) pdsch_llr[i];
bit[i] = (float) i;
}
fl_set_xyplot_xbounds(form->pdsch_llr,0,coded_bits_per_codeword/4);
fl_set_xyplot_data(form->pdsch_llr,bit,llr,coded_bits_per_codeword/4,"","","");
fl_set_xyplot_xbounds(form->pdsch_llr,0,coded_bits_per_codeword);
fl_set_xyplot_data(form->pdsch_llr,bit,llr,coded_bits_per_codeword,"","","");
}
// PDSCH I/Q of MF Output
......
openair1/PHY/TOOLS/time_meas.h
View file @ 84a1c737
......@@ -26,6 +26,9 @@
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
#ifndef __TIME_MEAS_DEFS__H__
#define __TIME_MEAS_DEFS__H__
#include <unistd.h>
#include <math.h>
#include <stdint.h>
......@@ -148,3 +151,4 @@ static inline void copy_meas(time_stats_t *dst_ts,time_stats_t *src_ts)
dst_ts->max=src_ts->max;
}
}
#endif
openair1/PHY/defs.h
View file @ 84a1c737
......@@ -278,6 +278,9 @@ typedef struct PHY_VARS_eNB_s {
int **dl_precoder_SeNB[3];
char log2_maxp; /// holds the maximum channel/precoder coefficient
/// if ==0 enables phy only test mode
int mac_enabled;
/// For emulation only (used by UE abstraction to retrieve DCI)
uint8_t num_common_dci[2]; // num_dci in even/odd subframes
uint8_t num_ue_spec_dci[2]; // num_dci in even/odd subframes
......@@ -583,6 +586,9 @@ typedef struct {
/// holds the maximum channel/precoder coefficient
char log2_maxp;
/// if ==0 enables phy only test mode
int mac_enabled;
/// Flag to initialize averaging of PHY measurements
int init_averaging;
......
openair1/SCHED/phy_mac_stub.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair1/SCHED/phy_procedures_lte_eNb.c
View file @ 84a1c737
This diff is collapsed.
openair1/SCHED/phy_procedures_lte_ue.c
View file @ 84a1c737
This diff is collapsed.
openair1/SIMULATION/LTE_PHY/dlsim.c
View file @ 84a1c737
......@@ -61,25 +61,7 @@
extern unsigned int dlsch_tbs25[27][25],TBStable[27][110];
extern unsigned char offset_mumimo_llr_drange_fix;
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
#endif
//#define AWGN
//#define NO_DCI
//#define ABSTRACTION
/*
#define RBmask0 0x00fc00fc
#define RBmask1 0x0
#define RBmask2 0x0
#define RBmask3 0x0
*/
PHY_VARS_eNB *PHY_vars_eNB;
PHY_VARS_UE *PHY_vars_UE;
......@@ -237,10 +219,9 @@ int main(int argc, char **argv)
short *uncoded_ber_bit=NULL;
uint8_t N_RB_DL=25,osf=1;
frame_t frame_type = FDD;
#ifdef XFORMS
int xforms=0;
FD_lte_phy_scope_ue *form_ue;
char title[255];
#endif
uint32_t DLSCH_RB_ALLOC = 0x1fff;
int numCCE=0;
int dci_length_bytes=0,dci_length=0;
......@@ -305,7 +286,7 @@ int main(int argc, char **argv)
// num_layers = 1;
perfect_ce = 0;
while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:PLl:Y")) != -1) {
while ((c = getopt (argc, argv, "ahdpZDe:Em:n:o:s:f:t:c:g:r:F:x:y:z:AM:N:I:i:O:R:S:C:T:b:u:v:w:B:PLl:XY")) != -1) {
switch (c) {
case 'a':
awgn_flag = 1;
......@@ -557,6 +538,10 @@ int main(int argc, char **argv)
break;
case 'X':
xforms=1;
break;
case 'Y':
perfect_ce=1;
break;
......@@ -636,7 +621,7 @@ int main(int argc, char **argv)
if ((transmission_mode > 1) && (n_tx != 2))
printf("n_tx must be >1 for transmission_mode %d\n",transmission_mode);
#ifdef XFORMS
if (xforms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_ue = create_lte_phy_scope_ue();
sprintf (title, "LTE PHY SCOPE eNB");
......@@ -648,8 +633,7 @@ int main(int argc, char **argv)
fl_set_object_label(form_ue->button_0, "IA Receiver ON");
fl_set_object_color(form_ue->button_0, FL_GREEN, FL_GREEN);
}
#endif
}
if (transmission_mode==5) {
n_users = 2;
......@@ -3496,13 +3480,13 @@ PMI_FEEDBACK:
// PHY_vars_UE->dlsch_ue[0][0]->harq_processes[0]->round++;
}
#ifdef XFORMS
if (xforms==1) {
phy_scope_UE(form_ue,
PHY_vars_UE,
eNB_id,
0,// UE_id
subframe);
#endif
}
} //round
......
openair1/SIMULATION/LTE_PHY/mbmssim.c
View file @ 84a1c737
......@@ -173,7 +173,9 @@ int main(int argc, char **argv)
lte_frame_type_t frame_type = FDD;
uint32_t Nsoft = 1827072;
/*
#ifdef XFORMS
FD_lte_phy_scope_ue *form_ue;
char title[255];
......@@ -183,6 +185,7 @@ int main(int argc, char **argv)
sprintf (title, "LTE DL SCOPE UE");
fl_show_form (form_ue->lte_phy_scope_ue, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
#endif
*/
logInit();
number_of_cards = 1;
......@@ -382,14 +385,14 @@ int main(int argc, char **argv)
0);
// Create transport channel structures for 2 transport blocks (MIMO)
PHY_vars_eNB->dlsch_eNB_MCH = new_eNB_dlsch(1,8,N_RB_DL,0);
PHY_vars_eNB->dlsch_eNB_MCH = new_eNB_dlsch(1,8,Nsoft,N_RB_DL,0);
if (!PHY_vars_eNB->dlsch_eNB_MCH) {
printf("Can't get eNB dlsch structures\n");
exit(-1);
}
PHY_vars_UE->dlsch_ue_MCH[0] = new_ue_dlsch(1,8,MAX_TURBO_ITERATIONS_MBSFN,N_RB_DL,0);
PHY_vars_UE->dlsch_ue_MCH[0] = new_ue_dlsch(1,8,Nsoft,MAX_TURBO_ITERATIONS_MBSFN,N_RB_DL,0);
PHY_vars_eNB->lte_frame_parms.num_MBSFN_config = 1;
PHY_vars_eNB->lte_frame_parms.MBSFN_config[0].radioframeAllocationPeriod = 0;
......
openair1/SIMULATION/LTE_PHY/ulsim.c
View file @ 84a1c737
......@@ -52,9 +52,7 @@
#include "LAYER2/MAC/vars.h"
#include "OCG_vars.h"
#ifdef XFORMS
#include "PHY/TOOLS/lte_phy_scope.h"
#endif
extern unsigned short dftsizes[33];
extern short *ul_ref_sigs[30][2][33];
......@@ -74,12 +72,9 @@ node_desc_t *ue_data[NUMBER_OF_UE_MAX];
extern uint16_t beta_ack[16],beta_ri[16],beta_cqi[16];
//extern char* namepointer_chMag ;
#ifdef XFORMS
int xforms=0;
FD_lte_phy_scope_enb *form_enb;
char title[255];
#endif
/*the following parameters are used to control the processing times*/
double t_tx_max = -1000000000; /*!< \brief initial max process time for tx */
......@@ -204,7 +199,7 @@ int main(int argc, char **argv)
logInit();
while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:L")) != -1) {
while ((c = getopt (argc, argv, "hapZEbm:n:Y:X:x:s:w:e:q:d:D:O:c:r:i:f:y:c:oA:C:R:g:N:l:S:T:QB:PI:LF")) != -1) {
switch (c) {
case 'a':
channel_model = AWGN;
......@@ -454,6 +449,10 @@ int main(int argc, char **argv)
max_turbo_iterations=atoi(optarg);
break;
case 'F':
xforms=1;
break;
case 'Z':
dump_table = 1;
break;
......@@ -594,12 +593,12 @@ int main(int argc, char **argv)
}
#ifdef XFORMS
if (xforms==1) {
fl_initialize (&argc, argv, NULL, 0, 0);
form_enb = create_lte_phy_scope_enb();
sprintf (title, "LTE PHY SCOPE eNB");
fl_show_form (form_enb->lte_phy_scope_enb, FL_PLACE_HOTSPOT, FL_FULLBORDER, title);
#endif
}
PHY_vars_UE->lte_ue_pdcch_vars[0]->crnti = 14;
......@@ -1354,9 +1353,9 @@ int main(int argc, char **argv)
if ((errs[0]>=100) && (trials>(n_frames/2)))
break;
#ifdef XFORMS
if (xforms==1)
phy_scope_eNB(form_enb,PHY_vars_eNB,0);
#endif
/*calculate the total processing time for each packet, get the max, min, and number of packets that exceed t>3000us*/
double t_tx = (double)PHY_vars_UE->phy_proc_tx.p_time/cpu_freq_GHz/1000.0;
......
openair2/COMMON/commonDef.h
View file @ 84a1c737
......@@ -48,7 +48,19 @@ Description Contains global common definitions
#include <stdint.h>
#include <stddef.h>
#include <stdbool.h>
typedef signed char boolean_t;
#if !defined(TRUE)
#define TRUE (boolean_t)0x01
#endif
#if !defined(FALSE)
#define FALSE (boolean_t)0x00
#endif
#define BOOL_NOT(b) (b^TRUE)
#define NAS_UE_ID_FMT "0x%06x"
......@@ -59,13 +71,6 @@ Description Contains global common definitions
#define RETURNok (0)
#define RETURNerror (-1)
#ifndef FALSE
#define FALSE (0)
#endif
#ifndef TRUE
#define TRUE (1)
#endif
/*
* Name of the environment variable which defines the default directory
* where the NAS application is executed and where are located files
......
openair2/COMMON/s1ap_messages_types.h
View file @ 84a1c737
......@@ -112,7 +112,7 @@ typedef struct net_ip_address_s {
unsigned ipv4:1;
unsigned ipv6:1;
char ipv4_address[16];
char ipv6_address[40];
char ipv6_address[46];
} net_ip_address_t;
typedef uint64_t bitrate_t;
......
openair2/ENB_APP/enb_config.c
View file @ 84a1c737
......@@ -265,7 +265,7 @@ static const eutra_band_t eutra_bands[] = {
Enb_properties_array_t enb_properties;
static void enb_config_display(void)
void enb_config_display(void)
{
int i,j;
......@@ -1019,7 +1019,7 @@ const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP)
enb_properties.properties[enb_properties_index]->prach_zero_correlation[j] =prach_zero_correlation;
if ((prach_zero_correlation <0) || (prach_zero_correlation > 63))
if ((prach_zero_correlation <0) || (prach_zero_correlation > 15))
AssertError (0, parse_errors ++,
"Failed to parse eNB configuration file %s, enb %d unknown value \"%d\" for prach_zero_correlation choice: 0..15!\n",
lib_config_file_name_pP, i, prach_zero_correlation);
......
openair2/ENB_APP/enb_config.h
View file @ 84a1c737
......@@ -264,6 +264,7 @@ typedef struct Enb_properties_array_s {
Enb_properties_t *properties[MAX_ENB];
} Enb_properties_array_t;
void enb_config_display(void);
const Enb_properties_array_t *enb_config_init(char* lib_config_file_name_pP);
const Enb_properties_array_t *enb_config_get(void);
......
openair2/LAYER2/MAC/l1_helpers.c
View file @ 84a1c737
......@@ -47,8 +47,8 @@ int8_t get_Po_NOMINAL_PUSCH(module_id_t module_idP,uint8_t CC_id)
if (CC_id>0) {
LOG_E(MAC,"Transmission on secondary CCs is not supported yet\n");
mac_xface->macphy_exit("MAC FATAL CC_id>0");
return 0; // not reached
//mac_xface->macphy_exit("MAC FATAL CC_id>0");
return 0;
}
if (UE_mac_inst[module_idP].radioResourceConfigCommon) {
......@@ -56,7 +56,8 @@ int8_t get_Po_NOMINAL_PUSCH(module_id_t module_idP,uint8_t CC_id)
}
else {
LOG_E(MAC,"[UE %d] CCid %d FATAL radioResourceConfigCommon is NULL !!!\n",module_idP,CC_id);
mac_xface->macphy_exit("FATAL radioResourceConfigCommon is NULL");
//mac_xface->macphy_exit("FATAL radioResourceConfigCommon is NULL");
return 0;
}
return(-120 + (rach_ConfigCommon->powerRampingParameters.preambleInitialReceivedTargetPower<<1) +
......
openair2/LAYER2/RLC/rlc.h
View file @ 84a1c737
......@@ -60,6 +60,8 @@
# include "DRB-ToAddModList.h"
# include "SRB-ToAddMod.h"
# include "SRB-ToAddModList.h"
# include "DRB-ToReleaseList.h"
#ifdef Rel10
#include "PMCH-InfoList-r9.h"
#endif
......
openair2/UTIL/OCG/OCG_parse_XML.c
View file @ 84a1c737
......@@ -51,10 +51,6 @@
#include "UTIL/OPT/opt.h"
/*----------------------------------------------------------------------------*/
#ifndef HAVE_STRNDUP
char * strndup (const char *s, size_t size);
#endif
static int oai_emulation_; /*!< \brief indicating that the parsing position is now within OAI_Emulation_*/
static int environment_system_config_; /*!< \brief indicating that the parsing position is now within Envi_Config_*/
......
openair3/S1AP/MESSAGES/ASN1/asn1cpatch_3.p0 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/S1AP/MESSAGES/ASN1/asn1tostruct.py
View file @ 84a1c737
This diff is collapsed.
openair3/S1AP/s1ap_eNB.c
View file @ 84a1c737
......@@ -72,9 +72,9 @@ s1ap_eNB_config_t s1ap_config;
static int s1ap_eNB_generate_s1_setup_request(
s1ap_eNB_instance_t *instance_p, s1ap_eNB_mme_data_t *s1ap_mme_data_p);
static
void s1ap_eNB_handle_register_eNB(instance_t instance, s1ap_register_enb_req_t *s1ap_register_eNB);
static
void s1ap_eNB_handle_sctp_association_resp(instance_t instance, sctp_new_association_resp_t *sctp_new_association_resp);
uint32_t s1ap_generate_eNB_id(void)
......@@ -150,7 +150,7 @@ static void s1ap_eNB_register_mme(s1ap_eNB_instance_t *instance_p,
itti_send_msg_to_task(TASK_SCTP, instance_p->instance, message_p);
}
static
void s1ap_eNB_handle_register_eNB(instance_t instance, s1ap_register_enb_req_t *s1ap_register_eNB)
{
s1ap_eNB_instance_t *new_instance;
......@@ -210,7 +210,6 @@ void s1ap_eNB_handle_register_eNB(instance_t instance, s1ap_register_enb_req_t *
}
}
static
void s1ap_eNB_handle_sctp_association_resp(instance_t instance, sctp_new_association_resp_t *sctp_new_association_resp)
{
s1ap_eNB_instance_t *instance_p;
......
openair3/SCTP/sctp_eNB_task.c
View file @ 84a1c737
......@@ -100,6 +100,7 @@ static STAILQ_HEAD(sctp_cnx_list_head, sctp_cnx_list_elm_s) sctp_cnx_list;
static uint16_t sctp_nb_cnx = 0;
//------------------------------------------------------------------------------
struct sctp_cnx_list_elm_s *sctp_get_cnx(int32_t assoc_id, int sd)
{
struct sctp_cnx_list_elm_s *elm;
......@@ -119,6 +120,7 @@ struct sctp_cnx_list_elm_s *sctp_get_cnx(int32_t assoc_id, int sd)
return NULL;
}
//------------------------------------------------------------------------------
void
sctp_handle_new_association_req(
const instance_t instance,
......@@ -388,6 +390,7 @@ sctp_handle_new_association_req(
sd, sctp_nb_cnx, assoc_id);
}
//------------------------------------------------------------------------------
void sctp_send_data(
instance_t instance,
task_id_t task_id,
......@@ -430,6 +433,7 @@ void sctp_send_data(
sctp_cnx->assoc_id);
}
//------------------------------------------------------------------------------
static int sctp_close_association(
const instance_t instance,
const task_id_t requestor,
......@@ -456,6 +460,7 @@ static int sctp_close_association(
return 0;
}
//------------------------------------------------------------------------------
static int sctp_create_new_listener(
const instance_t instance,
const task_id_t requestor,
......@@ -580,6 +585,7 @@ err:
return -1;
}
//------------------------------------------------------------------------------
static inline
void
sctp_eNB_accept_associations(
......@@ -646,6 +652,7 @@ sctp_eNB_accept_associations(
}
}
//------------------------------------------------------------------------------
static inline
void
sctp_eNB_read_from_socket(
......@@ -770,6 +777,7 @@ sctp_eNB_read_from_socket(
}
}
//------------------------------------------------------------------------------
void
sctp_eNB_flush_sockets(
struct epoll_event *events, int nb_events)
......@@ -799,6 +807,7 @@ sctp_eNB_flush_sockets(
}
//------------------------------------------------------------------------------
void *sctp_eNB_task(void *arg)
{
int nb_events;
......
openair3/TEST/EPC_TEST/generate_scenario.c
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/generate_scenario.h 0 → 100644
View file @ 84a1c737
/*******************************************************************************
OpenAirInterface
Copyright(c) 1999 - 2014 Eurecom
OpenAirInterface is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
OpenAirInterface is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with OpenAirInterface.The full GNU General Public License is
included in this distribution in the file called "COPYING". If not,
see <http://www.gnu.org/licenses/>.
Contact Information
OpenAirInterface Admin: openair_admin@eurecom.fr
OpenAirInterface Tech : openair_tech@eurecom.fr
OpenAirInterface Dev : openair4g-devel@lists.eurecom.fr
Address : Eurecom, Campus SophiaTech, 450 Route des Chappes, CS 50193 - 06904 Biot Sophia Antipolis cedex, FRANCE
*******************************************************************************/
/*
generate_scenario.h
-------------------
AUTHOR : Lionel GAUTHIER
COMPANY : EURECOM
EMAIL : Lionel.Gauthier@eurecom.fr
*/
#ifndef GENERATE_SCENARIO_H_
#define GENERATE_SCENARIO_H_
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include "commonDef.h"
#include "platform_types.h"
#include "platform_constants.h"
#include "PHY/impl_defs_lte.h"
#include "s1ap_messages_types.h"
#ifdef CMAKER
#include "SystemInformationBlockType2.h"
#else
#include "RRC/LITE/MESSAGES/SystemInformationBlockType2.h"
#endif
#define IPV4_STR_ADDR_TO_INT_NWBO(AdDr_StR,NwBo,MeSsAgE ) do {\
struct in_addr inp;\
if ( inet_aton(AdDr_StR, &inp ) < 0 ) {\
AssertFatal (0, MeSsAgE);\
} else {\
NwBo = inp.s_addr;\
}\
} while (0);
/** @defgroup _enb_app ENB APP
* @ingroup _oai2
* @{
*/
// Hard to find a defined value for max enb...
#define EPC_TEST_SCENARIO_MAX_ENB 4
typedef struct mme_ip_address_s {
unsigned ipv4:1;
unsigned ipv6:1;
unsigned active:1;
char *ipv4_address;
char *ipv6_address;
} mme_ip_address_t;
typedef struct Enb_properties_s {
/* Unique eNB_id to identify the eNB within EPC.
* For macro eNB ids this field should be 20 bits long.
* For home eNB ids this field should be 28 bits long.
*/
uint32_t eNB_id;
/* The type of the cell */
enum cell_type_e cell_type;
/* Optional name for the cell
* NOTE: the name can be NULL (i.e no name) and will be cropped to 150
* characters.
*/
char *eNB_name;
/* Tracking area code */
uint16_t tac;
/* Mobile Country Code
* Mobile Network Code
*/
uint16_t mcc;
uint16_t mnc;
uint8_t mnc_digit_length;
/* Nb of MME to connect to */
uint8_t nb_mme;
/* List of MME to connect to */
mme_ip_address_t mme_ip_address[S1AP_MAX_NB_MME_IP_ADDRESS];
int sctp_in_streams;
int sctp_out_streams;
char *enb_interface_name_for_S1U;
in_addr_t enb_ipv4_address_for_S1U;
tcp_udp_port_t enb_port_for_S1U;
char *enb_interface_name_for_S1_MME;
in_addr_t enb_ipv4_address_for_S1_MME;
} Enb_properties_t;
typedef struct Enb_properties_array_s {
int number;
Enb_properties_t *properties[EPC_TEST_SCENARIO_MAX_ENB];
} Enb_properties_array_t;
void enb_config_init(const char const * lib_config_file_name_pP);
#endif /* ENB_CONFIG_H_ */
/** @} */
openair3/TEST/EPC_TEST/mme_test_s1_pcap2pdml deleted 100755 → 0
View file @ 26f5d0d9
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario.h 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_decode.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_display.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_fsm.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_parse.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_s1ap.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_s1ap_compare_ie.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_s1ap_eNB_defs.h 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/TEST/EPC_TEST/play_scenario_sctp.c 0 → 100644
View file @ 84a1c737
This diff is collapsed.
openair3/UTILS/conversions.h
View file @ 84a1c737
This diff is collapsed.
targets/RT/USER/dot11.c deleted 100644 → 0
View file @ 26f5d0d9
This diff is collapsed.
targets/RT/USER/ieee80211p-softmodem.c deleted 100644 → 0
View file @ 26f5d0d9
This diff is collapsed.
targets/RT/USER/lte-softmodem.c
View file @ 84a1c737
This diff is collapsed.
targets/RT/USER/lte-ue.c
View file @ 84a1c737
This diff is collapsed.
targets/SIMU/USER/channel_sim.c
View file @ 84a1c737
This diff is collapsed.
targets/SIMU/USER/oaisim.c
View file @ 84a1c737
This diff is collapsed.
targets/SIMU/USER/oaisim.h
View file @ 84a1c737
This diff is collapsed.
targets/SIMU/USER/oaisim_functions.c
View file @ 84a1c737
This diff is collapsed.
targets/SIMU/USER/sinr_sim.c
View file @ 84a1c737
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment